Download or read book Phase Transformations in Titanium tantalum Alloys written by K. A. Bywater and published by . This book was released on 1970 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Phase Transformations written by Srikumar Banerjee and published by Elsevier. This book was released on 2010-05-31 with total page 837 pages. Available in PDF, EPUB and Kindle. Book excerpt: The terms phase transitions and phase transformations are often used in an interchangeable manner in the metallurgical literature. In Phase Transformations, transformations driven by pressure changes, radiation and deformation and those occurring in nanoscale multilayers are brought to the fore. Order-disorder transformations, many of which constitute very good examples of continuous transformations, are dealt with in a comprehensive manner. Almost all types of phase transformations and reactions that are commonly encountered in inorganic materials are covered and the underlying thermodynamic, kinetic and crystallographic aspects elucidated. - Shows readers the advancements in the field - due to enhanced computing power and superior experimental capability - Drawing upon the background and the research experience of the authors, bringing together a wealth of experience - Written essentially from a physical metallurgists view point
Download or read book The Science Technology and Application of Titanium written by R. I. Jaffee and published by Elsevier. This book was released on 2013-09-24 with total page 1225 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Science, Technology and Application of Titanium contains the proceedings of an International Conference organized by the Institute of Metals, The Metallurgical Society of AIME, and the American Society for Metals in association with the Japan Institute of Metals and the Academy of Sciences of the USSR and held at the Royal Festival Hall in London, on May 21-24, 1968. The papers explore scientific and technological developments as well as applications of titanium and cover topics ranging from processing of titanium to its chemical and environmental behavior, physics, thermodynamics, and kinetics. Deformation and fracture, phase transformations and heat treatment, and alloying are also discussed. This book is comprised of 114 chapters and begins with an overview of the titanium industry in Europe and the United States. The reader is then introduced to primary and secondary fabrication of titanium; corrosion and oxidation; physical properties of titanium alloys; interaction of titanium with elements of the periodic system; and elastic interactions between dislocations and twin and grain boundaries in titanium. The crystallography of deformation twinning in titanium is also examined, along with superplasticity and transformation plasticity in titanium. The remaining chapters focus on interstitial strengthening of titanium alloys; mechanism of martensitic transformation in titanium and its alloys; phase relationships in titanium-oxygen alloys; strengthening of titanium alloys by shock deformation; and titanium hot forming. This monograph will be of interest to chemists and metallurgists.
Download or read book Modelling of Phase Transformations and Mechanical Properties of Titanium Alloys During Processing written by Zhanli Guo and published by . This book was released on 1999 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Phase Transformations in Metals and Alloys Revised Reprint written by David A. Porter and published by CRC Press. This book was released on 2009-02-10 with total page 538 pages. Available in PDF, EPUB and Kindle. Book excerpt: Expanded and revised to cover developments in the field over the past 17 years, and now reprinted to correct errors in the prior printing, Phase Transformation in Metals and Alloys, Third Edition provides information and examples that better illustrate the engineering relevance of this topic. It supplies a comprehensive overview of specific types o
Download or read book Phase Transformations in Metals and Alloys Third Edition Revised Reprint written by David A. Porter and published by CRC Press. This book was released on 1992-09-10 with total page 532 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the decade since the first edition of this popular text was published, the metallurgical field has undergone rapid developments in many sectors. Nonetheless, the underlying principles governing these developments remain the same. A textbook that presents these advances within the context of the fundamentals is greatly needed by instructors in the field Phase Transformations in Metals and Alloys, Second Edition maintains the simplicity that undergraduate instructors and students have come to appreciate while updating and expanding coverage of recently developed methods and materials. The book is effectively divided into two parts. The beginning chapters contain the background material necessary for understanding phase transformations - thermodynamics, kinetics, diffusion theory and the structure and properties of interfaces. The following chapters deal with specific transformations - solidification, diffusional transformation in solids and diffusionless transformation. Case studies of engineering alloys are incorporated to provide a link between theory and practice. New additions include an extended list of further reading at the end of each chapter and a section containing complete solutions to all exercises in the book Designed for final year undergraduate and postgraduate students of metallurgy, materials science, or engineering materials, this is an ideal textbook for both students and instructors.
Download or read book Phase Transformations in Titanium Alloys at Low Temperatures written by M. A. DYAKOVA and published by . This book was released on with total page 2 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Phase Transformations in Titanium Rich Alloys of Iron and Titanium Reprinted from Journal of Metals Etc written by d. h Polonis (and PARR (James Gordon)) and published by . This book was released on 1954 with total page 8 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Martensitic Transformation written by Zenji Nishiyama and published by Elsevier. This book was released on 2012-12-02 with total page 480 pages. Available in PDF, EPUB and Kindle. Book excerpt: Martensitic Transformation examines martensitic transformation based on the known crystallographical data. Topics covered range from the crystallography of martensite to the transformation temperature and rate of martensite formation. The conditions for martensite formation and stabilization of austenite are also discussed, along with the crystallographic theory of martensitic transformations. Comprised of six chapters, this book begins with an introduction to martensite and martensitic transformation, with emphasis on the basic properties of martensite in steels such as carbon steels. The next two chapters deal with the crystallography of martensite and discuss the martensitic transformation behavior of the second-order transition; lattice imperfections in martensite; and close-packed layer structures of martensites produced from ? phase in noble-metal-base alloys. Thermodynamical problems and kinetics are also analysed, together with conditions for the nucleation of martensite and problems concerning stabilization of austenite. The last chapter discusses the theory of the mechanism underlying martensitic transformation. This monograph will be of interest to metallurgists and materials scientists.
Download or read book Phase transformations in transage alpha beta titanium alloys written by Anthony Ifeanyi Paul Nwobu and published by . This book was released on 1982 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Phase Transformations in Ti3A1 Based Alloy written by Emmanuel Tsourdalakis and published by . This book was released on 1991 with total page 57 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Recrystallization and Related Annealing Phenomena written by F.J. Humphreys and published by Elsevier. This book was released on 2012-12-02 with total page 520 pages. Available in PDF, EPUB and Kindle. Book excerpt: The annealing of deformed materials is of both technological importance and scientific interest. The phenomena have been most widely studied in metals, although they occur in all crystalline materials such as the natural deformation of rocks and the processing of technical ceramics. Research is mainly driven by the requirements of industry, and where appropriate, the book discusses the extent to which we are able to formulate quantitative, physically-based models which can be applied to metal-forming processes.The subjects treated in this book are all active research areas, and form a major part of at least four regular international conference series. However, there have only been two monographs published in recent times on the subject of recrystallization, the latest nearly 20 years ago. Since that time, considerable advances have been made, both in our understanding of the subject and in the techniques available to the researcher.The book covers recovery, recrystallization and grain growth in depth including specific chapters on ordered materials, two-phase alloys, annealing textures and annealing during and after hot working. Also contained are treatments of the deformed state and the structure and mobility of grain boundaries, technologically important examples and a chapter on computer simulation and modelling. The book provides a scientific treatment of the subject for researchers or students in Materials Science, Metallurgy and related disciplines, who require a more detailed coverage than is found in textbooks on physical metallurgy, and a more coherent treatment than will be found in the many conference proceedings and review articles.
Download or read book Mechanisms of Diffusional Phase Transformations in Metals and Alloys written by Hubert I. Aaronson and published by CRC Press. This book was released on 2016-04-19 with total page 688 pages. Available in PDF, EPUB and Kindle. Book excerpt: Developed by the late metallurgy professor and master experimentalist Hubert I. Aaronson, this collection of lecture notes details the fundamental principles of phase transformations in metals and alloys upon which steel and other metals industries are based. Mechanisms of Diffusional Phase Transformations in Metals and Alloys is devoted to solid-s
Download or read book Phase Transformations in Some Hafnium tantalum titanium zirconium Alloys written by and published by . This book was released on 1997 with total page 9 pages. Available in PDF, EPUB and Kindle. Book excerpt: Phase transformations in hafnium alloys are of interest as a means of achieving a material which exhibits flow softening and high localized strains during deformation at high strain rates. Hafnium transforms from a body-centered-cubic beta phase to a hexagonal alpha phase upon cooling below 1749°C. Hafnium-based alloys containing up to 17.5% Ti, up to 17.5% Ta, and up to 7.3% Zr by weight were button-arc melted and, in some cases, hot extruded to obtain a refined grain size. A number of alloys were shown to have beta solvus temperatures in the range of 1100 to 1300°C and showed evidence of a shear transformation upon water quenching. The Vickers microhardness of the quenched materials are typically above 350 HV as compared to 300 HV or less for materials with an alpha plus beta structure. Quenching dilatometry indicates a martensite start temperature of about 750°C for the Hf-7.5 Ta-10 Ti-1 Zr alloy and 800°C or more for the Hf-7.5 Ta-7.5 Ti-1 Zr alloy. Tensile tests at 1 s−1 strain rate show a constant ultimate tensile strength for temperatures up to 600°C for the above two alloys and a rapid decrease in strength with a further increase in temperature.
Download or read book Study of the Phase Transformations in the Metastable Beta Titanium Alloys Ti 13V 11Cr 3A1 Ti 13V 11Cr and Ti 15Cr and the Microstructural mechanical Properties Relationship in the Ti 13V 11Cr 3A1 Alloy written by G. Hari Narayanan and published by . This book was released on 1971 with total page 458 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Internal Friction in Metallic Materials written by Mikhail S. Blanter and published by Springer Science & Business Media. This book was released on 2007-05-17 with total page 553 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a unique collection of experimental data in the field of internal friction, anelastic relaxation, and damping properties of metallic materials. It reviews virtually all anelastic relaxation phenomena ever published. The reader is also supplied with explanations of the basic physical mechanisms of internal friction, a summary of typical effects for different groups of metals, and more than 2000 references to original papers.
Download or read book Titanium written by Matthew J. Donachie and published by ASM International. This book was released on 2000 with total page 381 pages. Available in PDF, EPUB and Kindle. Book excerpt: Designed to support the need of engineering, management, and other professionals for information on titanium by providing an overview of the major topics, this book provides a concise summary of the most useful information required to understand titanium and its alloys. The author provides a review of the significant features of the metallurgy and application of titanium and its alloys. All technical aspects of the use of titanium are covered, with sufficient metals property data for most users. Because of its unique density, corrosion resistance, and relative strength advantages over competing materials such as aluminum, steels, and superalloys, titanium has found a niche in many industries. Much of this use has occurred through military research, and subsequent applications in aircraft, of gas turbine engines, although more recent use features replacement joints, golf clubs, and bicycles.Contents include: A primer on titanium and its alloys, Introduction to selection of titanium alloys, Understanding titanium's metallurgy and mill products, Forging and forming, Castings, Powder metallurgy, Heat treating, Joining technology and practice, Machining, Cleaning and finishing, Structure/processing/property relationships, Corrosion resistance, Advanced alloys and future directions, Appendices: Summary table of titanium alloys, Titanium alloy datasheets, Cross-reference to titanium alloys, Listing of selected specification and standardization organizations, Selected manufacturers, suppliers, services, Corrosion data, Machining data.
