Download or read book Phase Transformations in Steels written by Elena Pereloma and published by Elsevier. This book was released on 2012-05-11 with total page 657 pages. Available in PDF, EPUB and Kindle. Book excerpt: The processing-microstructure-property relationships in steels continue to present challenges to researchers because of the complexity of phase transformation reactions and the wide spectrum of microstructures and properties achievable. This major two-volume work summarises the current state of research on phase transformations in steels and its implications for the emergence of new steels with enhanced engineering properties. Volume 1 reviews fundamentals and diffusion-controlled phase transformations. After a historical overview, chapters in part one discuss fundamental principles of thermodynamics, diffusion and kinetics as well as phase boundary interfaces. Chapters in part two go on to consider ferrite formation, proeutectoid ferrite and cementite transformations, pearlite formation and massive austenite-ferrite phase transformations. Part three discusses the mechanisms of bainite transformations, including carbide-containing and carbide-free bainite. The final part of the book considers additional driving forces for transformation including nucleation and growth during austenite-to-ferrite phase transformations, dynamic strain-induced ferrite transformations (DIST) as well as the effects of magnetic fields and heating rates. With its distinguished editors and distinguished international team of contributors, the two volumes of Phase transformations in steels is a standard reference for all those researching the properties of steel and developing new steels in such areas as automotive engineering, oil and gas and energy production. Discusses the fundamental principles of thermodynamics, diffusion and kinetics Considers various transformations, including ferrite formation, proeutectoid ferrite and cementite transformations Considers additional driving forces for transformation including nucleation and growth during austenite-to-ferrite phase transformations
Download or read book Phase Transformations in Steels written by Elena Pereloma and published by Elsevier. This book was released on 2012-05-11 with total page 673 pages. Available in PDF, EPUB and Kindle. Book excerpt: The processing-microstructure-property relationships in steels continue to present challenges to researchers because of the complexity of phase transformation reactions and the wide spectrum of microstructures and properties achievable. This major two-volume work summarises the current state of research on phase transformations in steels and its implications for the emergence of new steels with enhanced engineering properties.Volume 2 reviews current research on diffusionless transformations and phase transformations in high strength steels, as well as advances in modelling and analytical techniques which underpin this research. Chapters in part one discuss the crystallography and kinetics of martensite transformations, the morphology, substructure and tempering of martensite as well as shape memory in ferrous alloys. Part two summarises research on phase transformations in high strength low alloy (HSLA) steels, transformation induced plasticity (TRIP)-assisted multiphase steels, quenched and partitioned steels, advanced nanostructured bainitic steels, high manganese twinning induced plasticity (TWIP) and maraging steels. The final two parts of the book review advances in modelling and the use of advanced analytical techniques to improve our understanding of phase transformations in steels.With its distinguished editors and distinguished international team of contributors, the two volumes of Phase transformations in steels is a standard reference for all those researching the properties of steel and developing new steels in such areas as automotive engineering, oil and gas and energy production. Alongside its companion volume, this major two-volume work summarises the current state of research on phase transformations in steels Reviews research on diffusionless transformations and phase transformations in high strength steels Examines advances in modelling and the use of advanced analytical techniques to improve understanding of phase transformations in steels
Download or read book Phase Transformations in Metals and Alloys Third Edition Revised Reprint written by David A. Porter and published by CRC Press. This book was released on 1992-09-10 with total page 532 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the decade since the first edition of this popular text was published, the metallurgical field has undergone rapid developments in many sectors. Nonetheless, the underlying principles governing these developments remain the same. A textbook that presents these advances within the context of the fundamentals is greatly needed by instructors in the field Phase Transformations in Metals and Alloys, Second Edition maintains the simplicity that undergraduate instructors and students have come to appreciate while updating and expanding coverage of recently developed methods and materials. The book is effectively divided into two parts. The beginning chapters contain the background material necessary for understanding phase transformations - thermodynamics, kinetics, diffusion theory and the structure and properties of interfaces. The following chapters deal with specific transformations - solidification, diffusional transformation in solids and diffusionless transformation. Case studies of engineering alloys are incorporated to provide a link between theory and practice. New additions include an extended list of further reading at the end of each chapter and a section containing complete solutions to all exercises in the book Designed for final year undergraduate and postgraduate students of metallurgy, materials science, or engineering materials, this is an ideal textbook for both students and instructors.
Download or read book Phase Transformation and Properties written by Gengxiang Hu and published by Walter de Gruyter GmbH & Co KG. This book was released on 2020-12-07 with total page 351 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook illustrates one-component phase diagrams, binary equilibrium phase diagrams and ternary phase diagrams for ceramics, polymers and alloys by presenting case studies on preparation processes, and provides up-to-date information on nano-crystal materials, non-crystal materials and functional materials. As second volume in the set, it is an extension of the first volume on physical aspect of materials.
Download or read book Phase Transformation in Metals written by Nestor Perez and published by Springer Nature. This book was released on 2020-09-25 with total page 553 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook explains the physics of phase transformation and associated constraints from a metallurgical or materials science point of view, based on many topics including crystallography, mass transport by diffusion, thermodynamics, heat transfer and related temperature gradients, thermal deformation, and even fracture mechanics. The work presented emphasizes solidification and related analytical models based on heat transfer. This corresponds with the most fundamental physical event of continuous evolution of latent heat of fusion for directional or non-directional liquid-to-solid phase transformation at a specific interface with a certain geometrical shape, such as planar or curved front. Dr. Perez introduces mathematical and engineering approximation schemes for describing the phase transformation, mainly during solidification of pure metals and alloys. Giving clear definitions and explanations of theoretical concepts and full detail of derivation of formulae, this interdisciplinary volume is ideal for graduate and upper-level undergraduate students in applied science, and professionals in the metal making and surface reconstruction industries.
Download or read book Phase Transitions in Materials written by Brent Fultz and published by Cambridge University Press. This book was released on 2014-08-14 with total page 589 pages. Available in PDF, EPUB and Kindle. Book excerpt: A clear, concise and rigorous textbook covering phase transitions in the context of advances in electronic structure and statistical mechanics.
Download or read book Phase Transformations of Elements Under High Pressure written by E. Yu Tonkov and published by CRC Press. This book was released on 2018-10-08 with total page 390 pages. Available in PDF, EPUB and Kindle. Book excerpt: As laboratories replace heavy hydraulic presses and bulky high-pressure chambers with miniature diamond anvils, traditional heaters with laser heating, and continue to improve methods of shock compression, there has been considerable new data obtained from the high-pressure, high-temperature modification of pure elements. The dense metallic modification of elements shows the potential for achieving superconductivity akin to theoretical predictions. Phase Transformations of Elements Under High Pressure contains the latest theoretical and experimental information on nearly 100 elements, including first-and second-phase transitions, melting lines, crystal structures of stable and metastable phases, stability of polymorphic modifications, and other useful properties and data. It emphasizes features such as changes in the liquid state, amorphization, and metallization, and provides temperature-pressure diagrams for every element. The book also describes the transitions of polymeric forms of fullerene, crystal modifications of elements stable under high pressures, and provides data that confirms their superconducting and magnetic properties. This handbook will be a lasting reference for scientists in a broad range of disciplines, including solid-state physics, chemistry, crystallography, mineralogy, and materials science.
Download or read book Phase Transformation and Diffusion written by G.B. Kale and published by Trans Tech Publications Ltd. This book was released on 2008-08-25 with total page 160 pages. Available in PDF, EPUB and Kindle. Book excerpt: Given that the basic purpose of all research in materials science and technology is to tailor the properties of materials to suit specific applications, phase transformations are the natural key to the fine-tuning of the structural, mechanical and corrosion properties. A basic understanding of the kinetics and mechanisms of phase transformation is therefore of vital importance. Apart from a few cases involving crystallographic martensitic transformations, all phase transformations are mediated by diffusion. Thus, proper control and understanding of the process of diffusion during nucleation, growth, oxidation, sintering, etc are essential for optimising the properties of materials to meet specific needs.
Download or read book The Theory of Transformations in Metals and Alloys written by J.W. Christian and published by Newnes. This book was released on 2002-12-10 with total page 1200 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work is a classic reference text for metallurgists, material scientists and crystallographers. The first edition was published in 1965. The first part of that edition was revised and re-published in 1975 and again in 1981. The present two-part set represents the eagerly awaited full revision by the author of his seminal work, now published as Parts I and II. Professor Christian was one of the founding fathers of materials science and highly respected worldwide. The new edition of his book deserves a place on the bookshelf of every materials science and engineering department. Suitable thermal and mechanical treatments will produce extensive rearrangements of the atoms in metals and alloys, and corresponding marked variations in physical and chemical properties. This book describes how such changes in the atomic configuration are effected, and discusses the associated kinetic and crystallographic features. It deals with areas such as lattice geometry, point defects, dislocations, stacking faults, grain and interphase boundaries, solid solutions, diffusion, etc. The first part covers the general theory while the second part is concerned with descriptions of specific types of transformations.
Download or read book Phase Equilibria Phase Diagrams and Phase Transformations written by Mats Hillert and published by Cambridge University Press. This book was released on 2007-11-22 with total page 525 pages. Available in PDF, EPUB and Kindle. Book excerpt: Computational tools allow material scientists to model and analyze increasingly complicated systems to appreciate material behavior. Accurate use and interpretation however, requires a strong understanding of the thermodynamic principles that underpin phase equilibrium, transformation and state. This fully revised and updated edition covers the fundamentals of thermodynamics, with a view to modern computer applications. The theoretical basis of chemical equilibria and chemical changes is covered with an emphasis on the properties of phase diagrams. Starting with the basic principles, discussion moves to systems involving multiple phases. New chapters cover irreversible thermodynamics, extremum principles, and the thermodynamics of surfaces and interfaces. Theoretical descriptions of equilibrium conditions, the state of systems at equilibrium and the changes as equilibrium is reached, are all demonstrated graphically. With illustrative examples - many computer calculated - and worked examples, this textbook is an valuable resource for advanced undergraduates and graduate students in materials science and engineering.
Download or read book Phase Transitions in Polymers The Role of Metastable States written by Stephen Z.D. Cheng and published by Elsevier. This book was released on 2008-09-10 with total page 325 pages. Available in PDF, EPUB and Kindle. Book excerpt: A classical metastable state possesses a local free energy minimum at infinite sizes, but not a global one. This concept is phase size independent. We have studied a number of experimental results and proposed a new concept that there exists a wide range of metastable states in polymers on different length scales where their metastability is critically determined by the phase size and dimensionality. Metastable states are also observed in phase transformations that are kinetically impeded on the pathway to thermodynamic equilibrium. This was illustrated in structural and morphological investigations of crystallization and mesophase transitions, liquid-liquid phase separation, vitrification and gel formation, as well as combinations of these transformation processes. The phase behaviours in polymers are thus dominated by interlinks of metastable states on different length scales. This concept successfully explains many experimental observations and provides a new way to connect different aspects of polymer physics. * Written by a leading scholar and industry expert* Presents new and cutting edge material encouraging innovation and future research* Connects hot topics and leading research in one concise volume
Download or read book Transformations of Materials written by Dimitri D Vvedensky and published by Morgan & Claypool Publishers. This book was released on 2019-09-30 with total page 184 pages. Available in PDF, EPUB and Kindle. Book excerpt: Phase transformations are among the most intriguing and technologically useful phenomena in materials, particularly with regard to controlling microstructure. After a review of thermodynamics, this book has chapters on Brownian motion and the diffusion equation, diffusion in solids based on transition-state theory, spinodal decomposition, nucleation and growth, instabilities in solidification, and diffusionless transformations. Each chapter includes exercises whose solutions are available in a separate manual. This book is based on the notes from a graduate course taught in the Centre for Doctoral Training in the Theory and Simulation of Materials. The course was attended by students with undergraduate degrees in physics, mathematics, chemistry, materials science, and engineering. The notes from this course, and this book, were written to accommodate these diverse backgrounds.
Download or read book Phase Transformations written by Elias C. Aifantis and published by Springer. This book was released on 1986-09-30 with total page 328 pages. Available in PDF, EPUB and Kindle. Book excerpt: Most papers based on contributions given at the Symposium on Phase Transformations--an Interdisciplinary Gathering, held in Newark, Del., Aug. 21-22, 1983, at the 20th Annual Meeting of the Society of Engineering Science.
Download or read book Rates of Phase Transformations written by R. H. Doremus and published by Academic Press. This book was released on 1985-10-28 with total page 200 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Phase Transformations and Heat Treatments of Steels written by Bankim Chandra Ray and published by CRC Press. This book was released on 2020-06-01 with total page 235 pages. Available in PDF, EPUB and Kindle. Book excerpt: The perpetual flow of understanding between phase transformation that controls grain/microstructures and heat treatment which decides the size of grains/microstructures of steels is not well articulated in the perspective of undergraduate students. In Phase Transformations and Heat Treatments of Steels, theories of phase transformation have been used to obtain a desirable phase or combination of phases by performing appropriate heat treatment operations, leading to unification of both the concepts. Further, it includes special and critical heat treatment practices, case studies, local and in-service heat treatments, curative and preventive measures of heat treatment defects for several common and high-performance applications. Features: Presents fundamentals of phase transformation in steels Analyzes basics of phase transformation due to heat treatment of steel under various environmental conditions Explains application of heat treatment for different structural components Discusses heat treatment defects and detection Emphasizes heat treatment of special steels and in-situ heat treatment practices
Download or read book Kinetics of Phase Transitions written by Sanjay Puri and published by CRC Press. This book was released on 2009-03-24 with total page 356 pages. Available in PDF, EPUB and Kindle. Book excerpt: Providing a comprehensive introduction with the necessary background material to make it accessible for a wide scientific audience, Kinetics of Phase Transitions discusses developments in domain-growth kinetics. This book combines pedagogical chapters from leading experts in this area and focuses on incorporating various experimentally releva
Download or read book Chemistry of Glasses written by A. Paul and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 301 pages. Available in PDF, EPUB and Kindle. Book excerpt: 'The preface ... either serves for the explanation of the purpose of the book, or for justification and as an answer to critics'. Lermontov This book is based mainly on the lectures on the Chemistry of Glasses which I gave at the University of Sheffield to the final year honours and postgraduate students of Glass Technology and Materials Science. Most books reflect the interests and enthusiasm of their authors, and the present one is no exception. The chemistry of glass is a rapidly developing field because the frontiers of advanced chemistry and advanced physics are merging together and con sequently this book will soon require considerable amplification and modification. However, my experience in teaching the chemistry of glasses for more than a decade has shown me that there is much need for a good text-book on the subject. This book is therefore intended to be a stop-gap which, until it receives that new revision. may serve as a useful reference work for students and research workers alike. I gratefully acknowledge the influence on my thinking of many of those colleagues at Sheffield with whom I have been in contact during the past twenty years or so. In addition to these personal influences, other published works have had considerable influence in modifying my approach. especially Cotton and Wilkinson's Advanced inorganic Chemistry. Dr Peter James helped me in writing Chapter 2, and Professor Peter McMillan not only read the whole manuscript but also made a number of most helpful suggestions.
