Download or read book Phase Interaction in Composite Materials written by S. A. Paipetis and published by . This book was released on 1992 with total page 616 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Polymer Composite Materials Interface Phenomena Processes written by Y. Ivanov and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 176 pages. Available in PDF, EPUB and Kindle. Book excerpt: New technologies demand new materials. Polymer composites, with their wide range of possible fillers and polymers, open the way to an enormous range of materials with differing chemical, physical, and mechanical properties. The ultimate goal of polymer composite research is to formulate procedures that will lead to the design of composites with preset, i.e. specified, properties. Based on many years' experience in the field, the authors prepare the way towards just such a design procedure. The key element is the analysis and classification of the state of the filler-polymer interfaces from the point of view of their acid-base adsorption interactions. These interfacial phenomena play a pivotal role in determining overall properties of the composite: its rheological behaviour, its structural properties, catalytic effects in polymerization and polycondensation, and other technological characteristics. The book discusses and evaluates the extensive previous research scattered throughout the literature in Eastern Europe and the West, presents numerous experimental studies, and sets new benchmarks for the analysis of polymer composites. The book is required for researchers wanting to keep abreast of the progress in the burgeoning fields of polymer analysis and design.
Download or read book The Interfacial Interactions in Polymeric Composites written by Güneri Akovali and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 460 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polymer composites represent materials of great and of continuously growing importance. Their potential for application appears to be limitless. They have been the subject of numerous studies both at academic and industrial levels. Much progress has been made in the incisive formulation of composites; sophisticated methods of property evaluation have been developed in the past decade and many, largely empirical solutions have been proposed to resolve the problem of their long-term performance under typical conditions of use (i. e. the use of silane or titane coupling agents to enhance adhesion within composite materials). Assuredly one of the most essential factors in the performance of these systems is the condition of the interface and interphase among the constituents of a given system. It has become clear that it is the interface/interphase, and the interactions which take place in this part of a system, which determine to a significant degree the initial properties of the material. In order to achieve leadership in the formulation and application of polymer composites, it is evident that in depth understanding of interfacial and interphase phenomena becomes a prerequisite.
Download or read book IUTAM Symposium on Microstructure Property Interactions in Composite Materials written by R. Pyrz and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 447 pages. Available in PDF, EPUB and Kindle. Book excerpt: The IUT AM Symposium on Microstructure Property Interactions in Composite Ma- rials was held during the dates 22nd to 25th August 1994 in Rebild Bakker Conference Centre, situated in the heart of one of Denmark's most beautiful natural areas. Participation in the Symposium was reserved for invited participants, suggested by members of the Scientific Committee. The cooperation with the Scientific Committee is highly appreciated. The Symposium brought together 76 researchers from 15 countries representing a broad range of backgrounds relevant to the topic of the meeting. The participants represented the disciplines of materials science and engineering, applied mechanics, applied mathematics and scientific computations. The Symposium comprehensively addressed the analytical, numerical and experimental methods that provide an estimation of the overall, effective properties from microstructural data. The 41 contributions emphasized the significance of the microstructure morphology in understanding the nature and origin of a multitude of properties such as viscoelasticity, plasticity, strength and fracture for a variety of polymer, metal and ceramic based composite materials. Specifically, the Symposium examined and reviewed the current state of the art of micromechanical modelling, experimental investigations and morphological qu- tification of composite materials' microstructure. The volume contains 35 papers published in an alphabetic order after the name of the first author. Much to regret of the Scientific Committee some manuscripts were not submitted. The financial support of the IUT AM, the Obels Family Foundation and the Institute of Mechanical Engineering, Aalborg University, is gratefully acknowledged.
Download or read book The Variational Approach to Fracture written by Blaise Bourdin and published by Springer Science & Business Media. This book was released on 2008-04-19 with total page 173 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presenting original results from both theoretical and numerical viewpoints, this text offers a detailed discussion of the variational approach to brittle fracture. This approach views crack growth as the result of a competition between bulk and surface energy, treating crack evolution from its initiation all the way to the failure of a sample. The authors model crack initiation, crack path, and crack extension for arbitrary geometries and loads.
Download or read book High Performance Structural Fibers for Advanced Polymer Matrix Composites written by National Research Council and published by National Academies Press. This book was released on 2005-05-09 with total page 70 pages. Available in PDF, EPUB and Kindle. Book excerpt: Military use of advanced polymer matrix composites (PMC)â€"consisting of a resin matrix reinforced by high-performance carbon or organic fibersâ€"while extensive, accounts for less that 10 percent of the domestic market. Nevertheless, advanced composites are expected to play an even greater role in future military systems, and DOD will continue to require access to reliable sources of affordable, high-performance fibers including commercial materials and manufacturing processes. As a result of these forecasts, DOD requested the NRC to assess the challenges and opportunities associated with advanced PMCs with emphasis on high-performance fibers. This report provides an assessment of fiber technology and industries, a discussion of R&D opportunities for DOD, and recommendations about accelerating technology transition, reducing costs, and improving understanding of design methodology and promising technologies.
Download or read book Stress Analysis of Fiber reinforced Composite Materials written by M. W. Hyer and published by DEStech Publications, Inc. This book was released on 2009 with total page 718 pages. Available in PDF, EPUB and Kindle. Book excerpt: Updated and improved, Stress Analysis of Fiber-Reinforced Composite Materials, Hyer's work remains the definitive introduction to the use of mechanics to understand stresses in composites caused by deformations, loading, and temperature changes. In contrast to a materials science approach, Hyer emphasizes the micromechanics of stress and deformation for composite material analysis. The book provides invaluable analytic tools for students and engineers seeking to understand composite properties and failure limits. A key feature is a series of analytic problems continuing throughout the text, starting from relatively simple problems, which are built up step-by-step with accompanying calculations. The problem series uses the same material properties, so the impact of the elastic and thermal expansion properties for a single-layer of FR material on the stress, strains, elastic properties, thermal expansion and failure stress of cross-ply and angle-ply symmetric and unsymmetric laminates can be evaluated. The book shows how thermally induced stresses and strains due to curing, add to or subtract from those due to applied loads.Another important element, and one unique to this book, is an emphasis on the difference between specifying the applied loads, i.e., force and moment results, often the case in practice, versus specifying strains and curvatures and determining the subsequent stresses and force and moment results. This represents a fundamental distinction in solid mechanics.
Download or read book Micromechanics of Composite Materials written by George Dvorak and published by Springer Science & Business Media. This book was released on 2012-12-09 with total page 455 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a broad exposition of analytical and numerical methods for modeling composite materials, laminates, polycrystals and other heterogeneous solids, with emphasis on connections between material properties and responses on several length scales, ranging from the nano and microscales to the macroscale. Many new results and methods developed by the author are incorporated into the rich fabric of the subject, which has developed from the work of many researchers over the last 50 years. Among the new results, the book offers an extensive analysis of internal and interface stresses caused by eigenstrains, such as thermal, transformation and inelastic strains in the constituents, which often exceed those caused by mechanical loads, and of inelastic behavior of metal matrix composites. Fiber prestress in laminates, and modeling of functionally graded materials are also analyzed. Furthermore, this book outlines several key subjects on modeling the properties of composites reinforced by particles of various shapes, aligned fibers, symmetric laminated plates and metal matrix composites. This volume is intended for advanced undergraduate and graduate students, researchers and engineers interested and involved in analysis and design of composite structures.
Download or read book Controlled Interphases in Composite Materials written by Hatsuo Ishida and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 821 pages. Available in PDF, EPUB and Kindle. Book excerpt: The third International Conference on Composite Interfaces (ICCI-III) was held under the auspecies of ASM International, The Aluminum Company of America (Alcoa), The Edison Polymer Innovation Co. (EPIC), Case Western Reserve University, Nippon Glass Fiber Co., Nitto Boseki Co., Office of Naval Reserach (ONR), SAMPE Japan, Teijin Co., Mobay Co., Union Carbide Co., and Vetrotex Sain-Gobain. The underlying philosophy of the conference continues to be the promotion of fundamental understanding of the structure and role of composite interfaces. With the growth of composite interface studies, the research direction naturally changes from characterization and understanding of interfacial structure to controlling this structure. For this reason, the conference was subtitled, "Controlled Interphase Structure." The rather unfamiliar phrase "interphase" is used to emphasize the interfacial region whose properties are different from the bulk. The importance of the interphase to the mechanochemical properties has been rapidly recognized among composite researchers in recent years. The conference incorporated nine sessions. No concurrent sessions were planned because of the strong interest among panicipants and organizers to intennix researchers from different disciplines. Papers presented were redistributed in Pans I throught V. Because of this, both the conference and proceedings are not organized based on the traditional disciplines or materials, but rather around concepts.
Download or read book Characterization of Composite Materials written by Hatsuo Ishida and published by Elsevier. This book was released on 2013-10-22 with total page 292 pages. Available in PDF, EPUB and Kindle. Book excerpt: Now, in one book, there is coverage of modern surface analytical techniques applied specifically to composite materials. Centering around spectroscopic characterization of composites and polymer-matrix composities, Characterization of CompositeMaterials covers techniques with a demonstrated use for composite stuides along with promising new techniques such as STM/AFM and special Raman spectroscopy. Each chapter will cover a specific technique and will provide basic background information, theories of the technique, and application examples, including futuristic state-of-the-art applications. Detailed information about the individual characterization techniques mentioned can be found in the Encyclopaedia of Materials Cahracterization, the companion volume in the Materials Characterization Series: surfaces, interfaces, thin films.
Download or read book Recent Advances in Composite Materials written by E.E. Gdoutos and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 393 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains 31 papers presented at the symposium on "Recent Advances in Composite Materials" which was organized in honor of Professor Stephanos A. Paipetis. The symposium took place at Democritus University of Thrace, in Xanthi, Greece on June 12-14, 2003. The book is a tribute to Stephanos A. Paipetis, a pioneer of composite materials, in recognition of his continuous, original diversified and outstanding contributions for half a century. The book consists of invited papers written by leading experts in the field. It contains original contributions concerning the latest developments in composite materials. It covers a wide range of subjects including experimental characterization, analytical modeling and applications of composite materials. The papers are arranged in the following six sections: General concepts, stress and failure analysis, mechanical properties, metal matrix composites, structural analysis and applications of composite materials. The first section on general concepts contains seven papers dealing with composites through the pursuit of the consilience among them, computation and mechatronic automation of multiphysics research, a theory of anisotropic scattering, wave propagation, multi-material composite wedges, a three-dimensional finite element analysis around broken fibers and an in situ assessment of the micromechanics of large scale bridging in ceramic composites.
Download or read book Phase Field Methods in Materials Science and Engineering written by Nikolas Provatas and published by John Wiley & Sons. This book was released on 2011-07-26 with total page 323 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive and self-contained, one-stop source discusses phase-field methodology in a fundamental way, explaining advanced numerical techniques for solving phase-field and related continuum-field models. It also presents numerical techniques used to simulate various phenomena in a detailed, step-by-step way, such that readers can carry out their own code developments. Features many examples of how the methods explained can be used in materials science and engineering applications.
Download or read book On a Phase Interchange Relationship for Composite Materials written by Kalman Schulgasser and published by . This book was released on 1975 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Defects and Damage in Composite Materials and Structures written by Rikard Benton Heslehurst and published by CRC Press. This book was released on 2014-04-21 with total page 206 pages. Available in PDF, EPUB and Kindle. Book excerpt: The advantages of composite materials include a high specific strength and stiffness, formability, and a comparative resistance to fatigue cracking and corrosion. However, not forsaking these advantages, composite materials are prone to a wide range of defects and damage that can significantly reduce the residual strength and stiffness of a structu
Download or read book Multi Scale Modelling of Composite Material Systems written by C Soutis and published by Elsevier. This book was released on 2005-08-29 with total page 525 pages. Available in PDF, EPUB and Kindle. Book excerpt: One of the most important and exciting areas of composites research is the development of modelling techniques to predict the response of composite materials to different types of stress. Predictive modelling provides the opportunity both to understand better how composites behave in different conditions and to develop materials with enhanced performance for particular industrial applications. Multi-scale modelling of composite material systems summarises the key research in this area and its implications for industry.The book covers modelling approaches ranging from the micron to the metre in scale, and from the single fibre to complete composite structures. Individual chapters discuss a variety of material types from laminates and fibre-reinforced composites to monolithic and sandwich composites. They also analyse a range of types of stress and stress response from fracture and impact to wear and fatigue. Authors also discuss the strengths and weaknesses of particular models.With its distinguished editors and international team of contributors, Multi-scale modelling of composite material systems is a standard reference for both academics and manufacturers in such areas as aerospace, automotive and civil engineering. Extensive coverage of this important and exciting area of composites research Understand how composites behave in different circumstances Compiled by an expert panel of authors and editors
Download or read book Multicomponent Phase Diagrams Applications for Commercial Aluminum Alloys written by Nikolay A. Belov and published by Elsevier. This book was released on 2005-07-01 with total page 428 pages. Available in PDF, EPUB and Kindle. Book excerpt: Despite decades of extensive research and application, commercial aluminum alloys are still poorly understood in terms of the phase composition and phase transformations occurring during solidification, cooling, and heating. Multicomponent Phase Diagrams: Applications for Commercial Aluminum Alloys aims to apply multi-component phase diagrams to commercial aluminum alloys, and give a comprehensive coverage of available and assessed phase diagrams for aluminum-based alloy systems of different dimensionality. Features data on non-equilibrium phase diagrams, which can rarely be obtained from other publications Extensive coverage of all groups of commercially important alloys and materials
Download or read book Nanocomposites and Polymers with Analytical Methods written by John Cuppoletti and published by BoD – Books on Demand. This book was released on 2011-08-09 with total page 420 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains 16 chapters. In the first part, there are 8 chapters describing new materials and analytic methods. These materials include chapters on gold nanoparticles and Sol-Gel metal oxides, nanocomposites with carbon nanotubes, methods of evaluation by depth sensing, and other methods. The second part contains 3 chapters featuring new materials with unique properties including optical non-linearities, new materials based on pulp fibers, and the properties of nano-filled polymers. The last part contains 5 chapters with applications of new materials for medical devices, anodes for lithium batteries, electroceramics, phase change materials and matrix active nanoparticles.