Download or read book Phase Equilibria in Chemical Engineering written by Stanley M. Walas and published by Butterworth-Heinemann. This book was released on 2013-10-22 with total page 689 pages. Available in PDF, EPUB and Kindle. Book excerpt: Phase Equilibria in Chemical Engineering is devoted to the thermodynamic basis and practical aspects of the calculation of equilibrium conditions of multiple phases that are pertinent to chemical engineering processes. Efforts have been made throughout the book to provide guidance to adequate theory and practice. The book begins with a long chapter on equations of state, since it is intimately bound up with the development of thermodynamics. Following material on basic thermodynamics and nonidealities in terms of fugacities and activities, individual chapters are devoted to equilibria primarily between pairs of phases. A few topics that do not fit into these categories and for which the state of the art is not yet developed quantitatively have been relegated to a separate chapter. The chapter on chemical equilibria is pertinent since many processes involve simultaneous chemical and phase equilibria. Also included are chapters on the evaluation of enthalpy and entropy changes of nonideal substances and mixtures, and on experimental methods. This book is intended as a reference and self-study as well as a textbook either for full courses in phase equilibria or as a supplement to related courses in the chemical engineering curriculum. Practicing engineers concerned with separation technology and process design also may find the book useful.
Download or read book High Pressure Fluid Phase Equilibria written by Ulrich K Deiters and published by Elsevier. This book was released on 2012-04-26 with total page 363 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book begins with an overview of the phase diagrams of fluid mixtures (fluid = liquid, gas, or supercritical state), which can show an astonishing variety when elevated pressures are taken into account; phenomena like retrograde condensation (single and double) and azeotropy (normal and double) are discussed. It then gives an introduction into the relevant thermodynamic equations for fluid mixtures, including some that are rarely found in modern textbooks, and shows how they can they be used to compute phase diagrams and related properties. This chapter gives a consistent and axiomatic approach to fluid thermodynamics; it avoids using activity coefficients. Further chapters are dedicated to solid-fluid phase equilibria and global phase diagrams (systematic search for phase diagram classes). The appendix contains numerical algorithms needed for the computations. The book thus enables the reader to create or improve computer programs for the calculation of fluid phase diagrams. - introduces phase diagram classes, how to recognize them and identify their characteristic features - presents rational nomenclature of binary fluid phase diagrams - includes problems and solutions for self-testing, exercises or seminars
Download or read book Phase Equilibrium Engineering written by Esteban Alberto Brignole and published by Newnes. This book was released on 2013-04-02 with total page 347 pages. Available in PDF, EPUB and Kindle. Book excerpt: Traditionally, the teaching of phase equilibria emphasizes the relationships between the thermodynamic variables of each phase in equilibrium rather than its engineering applications. This book changes the focus from the use of thermodynamics relationships to compute phase equilibria to the design and control of the phase conditions that a process needs. Phase Equilibrium Engineering presents a systematic study and application of phase equilibrium tools to the development of chemical processes. The thermodynamic modeling of mixtures for process development, synthesis, simulation, design and optimization is analyzed. The relation between the mixture molecular properties, the selection of the thermodynamic model and the process technology that could be applied are discussed. A classification of mixtures, separation process, thermodynamic models and technologies is presented to guide the engineer in the world of separation processes. The phase condition required for a given reacting system is studied at subcritical and supercritical conditions. The four cardinal points of phase equilibrium engineering are: the chemical plant or process, the laboratory, the modeling of phase equilibria and the simulator. The harmonization of all these components to obtain a better design or operation is the ultimate goal of phase equilibrium engineering. - Methodologies are discussed using relevant industrial examples - The molecular nature and composition of the process mixture is given a key role in process decisions - Phase equilibrium diagrams are used as a drawing board for process implementation
Download or read book The Thermodynamics of Phase and Reaction Equilibria written by Ismail Tosun and published by Newnes. This book was released on 2012-10-17 with total page 736 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides you with a sound foundation for understanding abstract concepts (eg physical properties such as fugacity, etc or chemical processes, ie distillation, etc) of phase and reaction equilibria and shows you how to apply these concepts to solve practical problems using numerous and clear examples.
Download or read book Molecular Thermodynamics of Fluid Phase Equilibria written by John M. Prausnitz and published by Pearson Education. This book was released on 1998-10-22 with total page 1150 pages. Available in PDF, EPUB and Kindle. Book excerpt: The classic guide to mixtures, completely updated with new models, theories, examples, and data. Efficient separation operations and many other chemical processes depend upon a thorough understanding of the properties of gaseous and liquid mixtures. Molecular Thermodynamics of Fluid-Phase Equilibria, Third Edition is a systematic, practical guide to interpreting, correlating, and predicting thermodynamic properties used in mixture-related phase-equilibrium calculations. Completely updated, this edition reflects the growing maturity of techniques grounded in applied statistical thermodynamics and molecular simulation, while relying on classical thermodynamics, molecular physics, and physical chemistry wherever these fields offer superior solutions. Detailed new coverage includes: Techniques for improving separation processes and making them more environmentally friendly. Theoretical concepts enabling the description and interpretation of solution properties. New models, notably the lattice-fluid and statistical associated-fluid theories. Polymer solutions, including gas-polymer equilibria, polymer blends, membranes, and gels. Electrolyte solutions, including semi-empirical models for solutions containing salts or volatile electrolytes. Coverage also includes: fundamentals of classical thermodynamics of phase equilibria; thermodynamic properties from volumetric data; intermolecular forces; fugacities in gas and liquid mixtures; solubilities of gases and solids in liquids; high-pressure phase equilibria; virial coefficients for quantum gases; and much more. Throughout, Molecular Thermodynamics of Fluid-Phase Equilibria strikes a perfect balance between empirical techniques and theory, and is replete with useful examples and experimental data. More than ever, it is the essential resource for engineers, chemists, and other professionals working with mixtures and related processes.
Download or read book Phase Equilibria Phase Diagrams and Phase Transformations written by Mats Hillert and published by Cambridge University Press. This book was released on 2007-11-22 with total page 525 pages. Available in PDF, EPUB and Kindle. Book excerpt: Computational tools allow material scientists to model and analyze increasingly complicated systems to appreciate material behavior. Accurate use and interpretation however, requires a strong understanding of the thermodynamic principles that underpin phase equilibrium, transformation and state. This fully revised and updated edition covers the fundamentals of thermodynamics, with a view to modern computer applications. The theoretical basis of chemical equilibria and chemical changes is covered with an emphasis on the properties of phase diagrams. Starting with the basic principles, discussion moves to systems involving multiple phases. New chapters cover irreversible thermodynamics, extremum principles, and the thermodynamics of surfaces and interfaces. Theoretical descriptions of equilibrium conditions, the state of systems at equilibrium and the changes as equilibrium is reached, are all demonstrated graphically. With illustrative examples - many computer calculated - and worked examples, this textbook is an valuable resource for advanced undergraduates and graduate students in materials science and engineering.
Download or read book Phase Equilibrium in Mixtures written by M. B. King and published by Elsevier. This book was released on 2013-10-22 with total page 604 pages. Available in PDF, EPUB and Kindle. Book excerpt: Phase Equilibrium in Mixtures deals with phase equilibrium and the methods of correlating, checking, and predicting phase data. Topics covered range from latent heat and vapor pressure to dilute solutions, ideal and near-ideal solutions, and consistency tests. Molecular considerations and their use for the prediction and correlation of data are also discussed. Comprised of nine chapters, this volume begins with an introduction to the role of thermodynamics and the criteria for equilibrium between phases, along with fugacity and the thermodynamic functions of mixing. The discussion then turns to some of the phase phenomena which may be encountered in chemical engineering practice; methods of correlating and extending vapor pressure data and practical techniques for calculating latent heats from these data; the behavior of dilute solutions both at low and high pressures for reacting and non-reacting systems; and the behavior of ideal and near-ideal solutions. The remaining chapters explore non-ideal solutions at normal pressures; practical methods for testing the thermodynamic consistency of phase data; and the extent to which the broad aspects of phase behavior may be interpreted in the light of simple molecular considerations. This book is intended primarily for graduate chemical engineers but should also be of interest to those graduates in physics or chemistry who need to use phase equilibrium data.
Download or read book Phase Equilibria written by Andreas L. Muhlbauer and published by Taylor & Francis. This book was released on 2023-02-03 with total page 486 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work provides coverage of experimental and theoretical procedures for vapour-liquid equilibria (VLE). A survey of the different models and approaches in recent literature enables the reader to choose the appropriate action.
Download or read book CRC Handbook of Phase Equilibria and Thermodynamic Data of Aqueous Polymer Solutions written by Christian Wohlfarth and published by CRC Press. This book was released on 2012-08-10 with total page 776 pages. Available in PDF, EPUB and Kindle. Book excerpt: A large amount of experimental data has been published since the debut of the original CRC Handbook of Thermodynamic Data of Aqueous Polymer Solutions. Incorporating new and updated material, the CRC Handbook of Phase Equilibria and Thermodynamic Data of Aqueous Polymer Solutions provides a comprehensive collection of thermodynamic data of polymer
Download or read book Phase Equilibria Crystallographic and Thermodynamic Data of Binary Alloys written by Felicitas Predel and published by Springer. This book was released on 2016-11-03 with total page 254 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thermodynamics determines the properties and region of existence of any alloy. Pressure, temperature and composition are the key parameters that dictate its crystal structure, crystallographic data, physical and mechanical properties. Phase diagrams are of utmost importance as overviews of the particularities of any alloying mixture. The present volume presents phase equilibria, thermodynamic and crystallographic data of the binary alloys K-O ... Y-Zr.
Download or read book Alloy Phase Equilibria written by Alan Prince and published by . This book was released on 1966 with total page 308 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Hydrothermal Properties of Materials written by Vladimir Valyashko and published by John Wiley & Sons. This book was released on 2008-12-16 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hydrothermal Properties of Materials: Experimental Data on Aqueous Phase Equilibria and Solution Properties at Elevated Temperatures and Pressures is designed for any scientists and engineer who deals with hydrothermal investigations and technologies. The book is organized into eight chapters, each dealing with a key physical property of behavior of solutions, so that a reader can obtain information on: hydrothermal experimental methods; available experimental data and the main features of properties behavior in a wide range of temperatures and pressures; and possible ways of experimental data processing for obtaining the derivative properties.
Download or read book Process Systems Engineering for Biofuels Development written by Adrian Bonilla-Petriciolet and published by John Wiley & Sons. This book was released on 2020-10-05 with total page 381 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive overview of current developments and applications in biofuels production Process Systems Engineering for Biofuels Development brings together the latest and most cutting-edge research on the production of biofuels. As the first book specifically devoted to process systems engineering for the production of biofuels, Process Systems Engineering for Biofuels Development covers theoretical, computational and experimental issues in biofuels process engineering. Written for researchers and postgraduate students working on biomass conversion and sustainable process design, as well as industrial practitioners and engineers involved in process design, modeling and optimization, this book is an indispensable guide to the newest developments in areas including: Enzyme-catalyzed biodiesel production Process analysis of biodiesel production (including kinetic modeling, simulation and optimization) The use of ultrasonification in biodiesel production Thermochemical processes for biomass transformation to biofuels Production of alternative biofuels In addition to the comprehensive overview of the subject of biofuels found in the Introduction of the book, the authors of various chapters have provided extensive discussions of the production and separation of biofuels via novel applications and techniques.
Download or read book Phase Equilibria in Ionic Liquid Facilitated Liquid Liquid Extractions written by Anand Bharti and published by CRC Press. This book was released on 2017-03-31 with total page 222 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a comprehensive overview of ionic liquid based separation techniques. The glimpse of thermodynamic predictive models along with global optimization techniques will help readers understand the separation techniques at molecular and macroscopic levels. Experimental and characterization techniques are coupled with model based predictions so as to provide multicomponent data for the scientific community. The models will focus more on the a-priori based predictions which gives higher emphasis on hydrogen-bonded systems. Particle Swarm Optimization (PSO) technique will also eventually help the readers to apply optimization technique to an extraction process. The overriding goal of this work is to provide pathways for leading engineers and researchers toward a clear understanding and firm grasp of the phase equilibria of Ionic Liquid systems.
Download or read book Phase Equilibrium Engineering written by Esteban Brignole and published by Elsevier Inc. Chapters. This book was released on 2013-04-02 with total page 42 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this chapter, the basic methodologies of phase equilibrium engineering are introduced through the systematic analysis of several case studies. Some of the thermodynamic tools that have been presented in the previous chapters are applied to illustrate how the phase and conceptual process design of complex engineering problems can be tackled from a phase equilibrium engineering approach. In all the case studies, the first step is to consider in great detail the properties of the process feed, the components, their physical properties, concentrations, and molecular interactions. This information is then used for the selection of thermodynamic models, a suitable technology, pressure, temperature, and compositional operating boundaries. It is shown how the mixture composition and the process goals and specifications determine the process scheme and the unit thermodynamic sensitivity. In addition, the importance of the mixture composition is highlighted in combination with the energy and material balance in the case study for the selection of the desirable natural gas cryogenic technologies. The use of a pressure versus temperature drawing board is used to plot the process trajectory and the mixture phase envelopes from the initial conditions to the key phase engineering design problem. Moreover, the phase design provides also a sound basis for the process initial specification and computer simulation. As another example of phase equilibrium engineering, the heat integration in a complex process is solved by the application of the Gibbs phase rule to the LLV equilibria of a ternary mixture.
Download or read book Encyclopedia of Glass Science Technology History and Culture Two Volume Set written by Pascal Richet and published by John Wiley & Sons. This book was released on 2021-02-05 with total page 1568 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Encyclopedia begins with an introduction summarizing itsscope and content. Glassmaking; Structure of Glass, GlassPhysics,Transport Properties, Chemistry of Glass, Glass and Light,Inorganic Glass Families, Organic Glasses, Glass and theEnvironment, Historical and Economical Aspect of Glassmaking,History of Glass, Glass and Art, and outlinepossible newdevelopments and uses as presented by the best known people in thefield (C.A. Angell, for example). Sections and chapters arearranged in a logical order to ensure overall consistency and avoiduseless repetitions. All sections are introduced by a briefintroduction and attractive illustration. Newly investigatedtopics will be addresses, with the goal of ensuring that thisEncyclopedia remains a reference work for years to come.
Download or read book Chemistry 2e written by Paul Flowers and published by . This book was released on 2019-02-14 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Chemistry 2e is designed to meet the scope and sequence requirements of the two-semester general chemistry course. The textbook provides an important opportunity for students to learn the core concepts of chemistry and understand how those concepts apply to their lives and the world around them. The book also includes a number of innovative features, including interactive exercises and real-world applications, designed to enhance student learning. The second edition has been revised to incorporate clearer, more current, and more dynamic explanations, while maintaining the same organization as the first edition. Substantial improvements have been made in the figures, illustrations, and example exercises that support the text narrative. Changes made in Chemistry 2e are described in the preface to help instructors transition to the second edition.
