Download or read book Phase Equilibria Phase Diagrams and Phase Transformations written by Mats Hillert and published by Cambridge University Press. This book was released on 2007-11-22 with total page 525 pages. Available in PDF, EPUB and Kindle. Book excerpt: Computational tools allow material scientists to model and analyze increasingly complicated systems to appreciate material behavior. Accurate use and interpretation however, requires a strong understanding of the thermodynamic principles that underpin phase equilibrium, transformation and state. This fully revised and updated edition covers the fundamentals of thermodynamics, with a view to modern computer applications. The theoretical basis of chemical equilibria and chemical changes is covered with an emphasis on the properties of phase diagrams. Starting with the basic principles, discussion moves to systems involving multiple phases. New chapters cover irreversible thermodynamics, extremum principles, and the thermodynamics of surfaces and interfaces. Theoretical descriptions of equilibrium conditions, the state of systems at equilibrium and the changes as equilibrium is reached, are all demonstrated graphically. With illustrative examples - many computer calculated - and worked examples, this textbook is an valuable resource for advanced undergraduates and graduate students in materials science and engineering.
Download or read book Phase Equilibria in Chemical Engineering written by Stanley M. Walas and published by Butterworth-Heinemann. This book was released on 2013-10-22 with total page 689 pages. Available in PDF, EPUB and Kindle. Book excerpt: Phase Equilibria in Chemical Engineering is devoted to the thermodynamic basis and practical aspects of the calculation of equilibrium conditions of multiple phases that are pertinent to chemical engineering processes. Efforts have been made throughout the book to provide guidance to adequate theory and practice. The book begins with a long chapter on equations of state, since it is intimately bound up with the development of thermodynamics. Following material on basic thermodynamics and nonidealities in terms of fugacities and activities, individual chapters are devoted to equilibria primarily between pairs of phases. A few topics that do not fit into these categories and for which the state of the art is not yet developed quantitatively have been relegated to a separate chapter. The chapter on chemical equilibria is pertinent since many processes involve simultaneous chemical and phase equilibria. Also included are chapters on the evaluation of enthalpy and entropy changes of nonideal substances and mixtures, and on experimental methods. This book is intended as a reference and self-study as well as a textbook either for full courses in phase equilibria or as a supplement to related courses in the chemical engineering curriculum. Practicing engineers concerned with separation technology and process design also may find the book useful.
Download or read book Phase Equilibria written by Andreas L. Muhlbauer and published by Taylor & Francis. This book was released on 2023-02-03 with total page 486 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work provides coverage of experimental and theoretical procedures for vapour-liquid equilibria (VLE). A survey of the different models and approaches in recent literature enables the reader to choose the appropriate action.
Download or read book Phase Equilibrium Engineering written by Esteban Alberto Brignole and published by Newnes. This book was released on 2013-04-02 with total page 347 pages. Available in PDF, EPUB and Kindle. Book excerpt: Traditionally, the teaching of phase equilibria emphasizes the relationships between the thermodynamic variables of each phase in equilibrium rather than its engineering applications. This book changes the focus from the use of thermodynamics relationships to compute phase equilibria to the design and control of the phase conditions that a process needs. Phase Equilibrium Engineering presents a systematic study and application of phase equilibrium tools to the development of chemical processes. The thermodynamic modeling of mixtures for process development, synthesis, simulation, design and optimization is analyzed. The relation between the mixture molecular properties, the selection of the thermodynamic model and the process technology that could be applied are discussed. A classification of mixtures, separation process, thermodynamic models and technologies is presented to guide the engineer in the world of separation processes. The phase condition required for a given reacting system is studied at subcritical and supercritical conditions. The four cardinal points of phase equilibrium engineering are: the chemical plant or process, the laboratory, the modeling of phase equilibria and the simulator. The harmonization of all these components to obtain a better design or operation is the ultimate goal of phase equilibrium engineering. Methodologies are discussed using relevant industrial examples The molecular nature and composition of the process mixture is given a key role in process decisions Phase equilibrium diagrams are used as a drawing board for process implementation
Download or read book The Thermodynamics of Phase and Reaction Equilibria written by Ismail Tosun and published by Newnes. This book was released on 2012-10-17 with total page 736 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides you with a sound foundation for understanding abstract concepts (eg physical properties such as fugacity, etc or chemical processes, ie distillation, etc) of phase and reaction equilibria and shows you how to apply these concepts to solve practical problems using numerous and clear examples.
Download or read book Molecular Thermodynamics of Fluid Phase Equilibria written by John M. Prausnitz and published by Pearson Education. This book was released on 1998-10-22 with total page 1149 pages. Available in PDF, EPUB and Kindle. Book excerpt: The classic guide to mixtures, completely updated with new models, theories, examples, and data. Efficient separation operations and many other chemical processes depend upon a thorough understanding of the properties of gaseous and liquid mixtures. Molecular Thermodynamics of Fluid-Phase Equilibria, Third Edition is a systematic, practical guide to interpreting, correlating, and predicting thermodynamic properties used in mixture-related phase-equilibrium calculations. Completely updated, this edition reflects the growing maturity of techniques grounded in applied statistical thermodynamics and molecular simulation, while relying on classical thermodynamics, molecular physics, and physical chemistry wherever these fields offer superior solutions. Detailed new coverage includes: Techniques for improving separation processes and making them more environmentally friendly. Theoretical concepts enabling the description and interpretation of solution properties. New models, notably the lattice-fluid and statistical associated-fluid theories. Polymer solutions, including gas-polymer equilibria, polymer blends, membranes, and gels. Electrolyte solutions, including semi-empirical models for solutions containing salts or volatile electrolytes. Coverage also includes: fundamentals of classical thermodynamics of phase equilibria; thermodynamic properties from volumetric data; intermolecular forces; fugacities in gas and liquid mixtures; solubilities of gases and solids in liquids; high-pressure phase equilibria; virial coefficients for quantum gases; and much more. Throughout, Molecular Thermodynamics of Fluid-Phase Equilibria strikes a perfect balance between empirical techniques and theory, and is replete with useful examples and experimental data. More than ever, it is the essential resource for engineers, chemists, and other professionals working with mixtures and related processes.
Download or read book Phase Diagrams and Heterogeneous Equilibria written by Bruno Predel and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 357 pages. Available in PDF, EPUB and Kindle. Book excerpt: This advanced comprehensive textbook introduces the practical application of phase diagrams to the thermodynamics of materials consisting of several phases. It describes the fundamental physics and thermodynamics as well as experimental methods, treating all material classes: metals, glasses, ceramics, polymers, organic materials, aqueous solutions. With many application examples and realistic cases from chemistry and materials science, it is intended for students and researchers in chemistry, metallurgy, mineralogy, and materials science as well as in engineering and physics. The authors treat the nucleation of phase transitions, the production and stability of technologically important metastable phases, and metallic glasses. Also concisely presented are the thermodynamics and composition of polymer systems. This innovative text puts this powerful analytical approach into a readily understandable and practical context, perhaps for the first time.
Download or read book Introduction to Phase Equilibria in Ceramic Systems written by Hummel and published by Routledge. This book was released on 2018-05-02 with total page 289 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by a leading practitioner and teacher in the field of ceramic science and engineering, this outstanding text provides advanced undergraduate- and graduate-level students with a comprehensive, up-to-date Introduction to Phase Equilibria in Ceramic Systems. Building upon a concise definition of the phase rule, the book logically proceeds from one- and two-component systems through increasingly complex systems, enabling students to utilize the phase rule in real applications. Unique because of its emphasis on phase diagrams, timely because of the rising importance of ceramic applications, practical because of its pedagogical approach, Introduction to Phase Equilibria in Ceramic Systems offers end-of-chapter review problems, extensive reading lists, a solid thermodynamic foundation and clear perspectives on the special properties of ceramics as compared to metals.This authoritative volume fills a broad gap in the literature, helping undergraduate- and graduate-level students of ceramic engineering and materials science to approach this demanding subject in a rational, confident fashion. In addition, Introduction to Phase Equilibria in Ceramic Systems serves as a valuable supplement to undergraduate-level metallurgy programs.
Download or read book High Pressure Fluid Phase Equilibria written by Ulrich K Deiters and published by Elsevier. This book was released on 2012-04-26 with total page 363 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book begins with an overview of the phase diagrams of fluid mixtures (fluid = liquid, gas, or supercritical state), which can show an astonishing variety when elevated pressures are taken into account; phenomena like retrograde condensation (single and double) and azeotropy (normal and double) are discussed. It then gives an introduction into the relevant thermodynamic equations for fluid mixtures, including some that are rarely found in modern textbooks, and shows how they can they be used to compute phase diagrams and related properties. This chapter gives a consistent and axiomatic approach to fluid thermodynamics; it avoids using activity coefficients. Further chapters are dedicated to solid-fluid phase equilibria and global phase diagrams (systematic search for phase diagram classes). The appendix contains numerical algorithms needed for the computations. The book thus enables the reader to create or improve computer programs for the calculation of fluid phase diagrams. introduces phase diagram classes, how to recognize them and identify their characteristic features presents rational nomenclature of binary fluid phase diagrams includes problems and solutions for self-testing, exercises or seminars
Download or read book Thermodynamics of Phase Equilibria in Food Engineering written by Camila G. Pereira and published by Academic Press. This book was released on 2018-10-26 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thermodynamics of Phase Equilibria in Food Engineering is the definitive book on thermodynamics of equilibrium applied to food engineering. Food is a complex matrix consisting of different groups of compounds divided into macronutrients (lipids, carbohydrates, and proteins), and micronutrients (vitamins, minerals, and phytochemicals). The quality characteristics of food products associated with the sensorial, physical and microbiological attributes are directly related to the thermodynamic properties of specific compounds and complexes that are formed during processing or by the action of diverse interventions, such as the environment, biochemical reactions, and others. In addition, in obtaining bioactive substances using separation processes, the knowledge of phase equilibria of food systems is essential to provide an efficient separation, with a low cost in the process and high selectivity in the recovery of the desired component. This book combines theory and application of phase equilibria data of systems containing food compounds to help food engineers and researchers to solve complex problems found in food processing. It provides support to researchers from academia and industry to better understand the behavior of food materials in the face of processing effects, and to develop ways to improve the quality of the food products.
Download or read book Working Guide to Vapor Liquid Phase Equilibria Calculations written by Tarek Ahmed and published by Gulf Professional Publishing. This book was released on 2009-08-27 with total page 149 pages. Available in PDF, EPUB and Kindle. Book excerpt: Working Guide to Vapor-Liquid Phase Equilibria Calculations offers a practical guide for calculations of vapor-phase equilibria. The book begins by introducing basic concepts such as vapor pressure, vapor pressure charts, equilibrium ratios, and flash calculations. It then presents methods for predicting the equilibrium ratios of hydrocarbon mixtures: Wilson's correlation, Standing's correlation, convergence pressure method, and Whitson and Torp correlation. The book describes techniques to determine equilibrium ratios of the plus fraction, including Campbell's method, Winn's method, and Katz's method. The remaining chapters cover the solution of phase equilibrium problems in reservoir and process engineering; developments in the field of empirical cubic equations of state (EOS) and their applications in petroleum engineering; and the splitting of the plus fraction for EOS calculations. Includes explanations of formulas Step by step calculations Provides examples and solutions
Download or read book Phase Equilibria written by Arnold Reisman and published by Elsevier. This book was released on 2013-10-22 with total page 560 pages. Available in PDF, EPUB and Kindle. Book excerpt: Phase Equilibria: Basic Principles, Applications, Experimental Techniques presents an analytical treatment in the study of the theories and principles of phase equilibria. The book is organized to afford a deep and thorough understanding of such subjects as the method of species model systems; condensed phase-vapor phase equilibria and vapor transport reactions; zone refining techniques; and nonstoichiometry. Physicists, physical chemists, engineers, and materials scientists will find the book a good reference material.
Download or read book Introduction to Phase Equilibria in Ceramics written by Clifton G. Bergeron and published by . This book was released on 1984 with total page 176 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Phase Equilibria Crystallographic and Thermodynamic Data of Binary Alloys written by Felicitas Predel and published by Springer. This book was released on 2016-11-03 with total page 254 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thermodynamics determines the properties and region of existence of any alloy. Pressure, temperature and composition are the key parameters that dictate its crystal structure, crystallographic data, physical and mechanical properties. Phase diagrams are of utmost importance as overviews of the particularities of any alloying mixture. The present volume presents phase equilibria, thermodynamic and crystallographic data of the binary alloys K-O ... Y-Zr.
Download or read book Phase Diagrams and Thermodynamic Modeling of Solutions written by Arthur D. Pelton and published by Academic Press. This book was released on 2018-09-19 with total page 401 pages. Available in PDF, EPUB and Kindle. Book excerpt: Phase Diagrams and Thermodynamic Modeling of Solutions provides readers with an understanding of thermodynamics and phase equilibria that is required to make full and efficient use of these tools. The book systematically discusses phase diagrams of all types, the thermodynamics behind them, their calculations from thermodynamic databases, and the structural models of solutions used in the development of these databases. Featuring examples from a wide range of systems including metals, salts, ceramics, refractories, and concentrated aqueous solutions, Phase Diagrams and Thermodynamic Modeling of Solutions is a vital resource for researchers and developers in materials science, metallurgy, combustion and energy, corrosion engineering, environmental engineering, geology, glass technology, nuclear engineering, and other fields of inorganic chemical and materials science and engineering. Additionally, experts involved in developing thermodynamic databases will find a comprehensive reference text of current solution models. Presents a rigorous and complete development of thermodynamics for readers who already have a basic understanding of chemical thermodynamics Provides an in-depth understanding of phase equilibria Includes information that can be used as a text for graduate courses on thermodynamics and phase diagrams, or on solution modeling Covers several types of phase diagrams (paraequilibrium, solidus projections, first-melting projections, Scheil diagrams, enthalpy diagrams), and more
Download or read book High Pressure Fluid Phase Equilibria written by Ulrich K Deiters and published by Elsevier. This book was released on 2023-12-01 with total page 476 pages. Available in PDF, EPUB and Kindle. Book excerpt: High pressures play a more and more important role in modern technology. Examples are the supercritical fluid extraction of medical drugs and dyes from biological material, the handling of compressed or liquefied gases (including natural gas or hydrogen), the operation of modern thermal power plants, or various technical processes for controlled particle formation. High-Pressure Fluid Phase Equilibria, Second Edition enables understanding of the complicated phase behaviour that fluid or fluid mixtures (liquids, gases, or supercritical phases) can exhibit at elevated pressures. The underlying thermodynamic equations are explained, and robust algorithms for the computation of such equilibria (including solid–fluid equilibria) are proposed. Since the publication of the first edition of this book there have been many new developments, for instance differential equation methods for the computation of phase equilibria, accurate numerical differentiation, high-precision equations of state (e.g., the GERG model). Moreover, more detail and explanation has been added on important topics that were only briefly examined in the original book to better assist the reader, such as expansion processes and chemical reactions). The book remains invaluable as a single resource for grasping the intricacies of fluid phase behaviour. It enables readers to write or improve their own computer programs for the calculation of phase equilibria. It will appeal to graduate students of chemical engineering and university research staff involved in chemical engineering of supercritical fluids or the physical chemistry of fluids; the book can also serve as the basis of lectures or advanced students’ seminars. Comprehensively presents the complex world of phase equilibria (binary and ternary) and the various methods for computing phase equilibria, whilst carefully considering the relevant pressure and temperature ranges Introduces phase diagram classes, how to recognize them, and how to identify their characteristic features Presents rational nomenclature of binary fluid phase diagrams Includes problems and solutions for self-testing, exercises, or seminars New to this Edition: Presentation of the phase equilibria models is extended and expanded There are now more descriptions on more equations of state, especially the PCSAFT EoS Features new chapter on nonisothermal applications and chemically reactive systems and extensive updates and additions to all existing chapters
Download or read book Phase Equilibria in Materials written by and published by Allied Publishers. This book was released on with total page 840 pages. Available in PDF, EPUB and Kindle. Book excerpt:
