Download or read book Phase change materials microcapsules reinforced with graphene oxide for energy storage technology written by Bowei Du and published by OAE Publishing Inc.. This book was released on 2023-05-29 with total page 21 pages. Available in PDF, EPUB and Kindle. Book excerpt: Phase change materials (PCMs) are considered one of the most promising energy storage methods owing to their beneficial effects on a larger latent heat, smaller volume change, and easier controlling than other materials. PCMs are widely used in solar energy heating, industrial waste heat utilization, energy conservation in the construction industry, and other fields. To avoid leakage, phase separation, and volatile problems of PCMs, the encapsulation technique typically uses organic polymer materials as shell structures of microcapsules. Furthermore, using inorganic materials to enhance the thermal property of phase change microcapsules is a popular approach in recent research. Especially, graphene oxide (GO) with high thermal conductivity was used as a common thermal conducting additive to improve the thermal performance of phase change microcapsules. Due to its amphiphilic property, GO combined with PCM microcapsules can achieve a variety of nanostructures for thermal energy storage. In this paper, four aspects have been summarized: configuration of PCMs, methods of combining GO with phase change microcapsules, position and content of GO, and applications of PCM/GO microcapsules. This work attempts to discuss preparation methods and heat-conducting properties of the PCM/GO microcapsules, which helps to better promote the application-targeted design and greatly improve the thermal properties of PCM microcapsules for various applications.
Download or read book Challenges and Opportunities of Distributed Renewable Power written by Sudipta De and published by Springer Nature. This book was released on with total page 536 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advances in Thermal Energy Storage Systems written by Luisa F. Cabeza and published by Elsevier. This book was released on 2014-10-31 with total page 623 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thermal energy storage (TES) technologies store thermal energy (both heat and cold) for later use as required, rather than at the time of production. They are therefore important counterparts to various intermittent renewable energy generation methods and also provide a way of valorising waste process heat and reducing the energy demand of buildings. This book provides an authoritative overview of this key area. Part one reviews sensible heat storage technologies. Part two covers latent and thermochemical heat storage respectively. The final section addresses applications in heating and energy systems. Reviews sensible heat storage technologies, including the use of water, molten salts, concrete and boreholes Describes latent heat storage systems and thermochemical heat storage Includes information on the monitoring and control of thermal energy storage systems, and considers their applications in residential buildings, power plants and industry
Download or read book Handbook of Sustainability Science and Research written by Walter Leal Filho and published by Springer. This book was released on 2017-10-03 with total page 991 pages. Available in PDF, EPUB and Kindle. Book excerpt: This multidisciplinary handbook explores concrete case studies which illustrate how sustainability science and research can contribute to the realization of the goals of the 2030 Agenda for Sustainable Development. It contains contributions from sustainability researchers from across the world.
Download or read book Emerging Applications of Carbon Nanotubes and Graphene written by Bhanu Pratap Singh and published by CRC Press. This book was released on 2023-02-27 with total page 305 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book comprehensively reviews recent and emerging applications of carbon nanotubes and graphene materials in a wide range of sectors. Detailed applications include structural materials, ballistic materials, energy storage and conversion, batteries, supercapacitors, smart sensors, environmental protection, nanoelectronics, optoelectronic and photovoltaics, thermoelectric, and conducting wires. It further covers human and structural health monitoring, and thermal management applications. Key selling features: Exclusively takes an application-oriented approach to cover emerging areas in carbon nanotubes and graphene Covers fundamental and applied knowledge related to carbon nanomaterials Includes advanced applications like human and structural health monitoring, smart sensors, ballistic protection and so forth Discusses novel applications such as thermoelectrics along with environmental protection related application Explores aspects of energy storage, generation and conversion including batteries, supercapacitors, and photovoltaics This book is aimed at graduate students and researchers in electrical, nanomaterials, chemistry, and other related areas.
Download or read book Construction 4 0 written by Marco Casini and published by Woodhead Publishing. This book was released on 2021-11-24 with total page 696 pages. Available in PDF, EPUB and Kindle. Book excerpt: Developments in data acquisition technologies, digital information and analysis, automated construction processes, and advanced materials and products have finally started to move the construction industry - traditionally reluctant to innovation and slow in adopting new technologies - toward a new era. Massive changes are occurring because of the possibilities created by Building information modeling, Extended reality, Internet of Things, Artificial intelligence and Machine Learning, Big data, Nanotechnology, 3D printing, and other advanced technologies, which are strongly interconnected and are driving the capabilities for much more efficient construction at scale. Construction 4.0: Advanced Technology, Tools and Materials for the Digital Transformation of the Construction Industry provides readers with a state-of-the-art review of the ongoing digital transformation of the sector within the new 4.0 framework, presenting a thorough investigation of the emerging trends, technologies, and strategies in the fields of smart building design, construction, and operation and providing a comprehensive guideline on how to exploit the new possibilities offered by the digital revolution. It will be an essential reference resource for academic researchers, material scientists and civil engineers, undergraduate and graduate students, and other professionals working in the field of smart ecoefficient construction and cutting-edge technologies applied to construction. Provides an overview of the Construction 4.0 framework to address the global challenges of the buildingsector in the 21st century and an in-depth analysis of the most advanced digital technologies and systems forthe operation and maintenance of infrastructure, real estate, and other built assets Covers major innovations across the value chain, including building design, fabrication, construction, operationand maintenance, and end-of-life Illustrates the most advanced digital tools and methods to support the building design activity, includinggenerative design, virtual reality, and digital fabrication Presents a thorough review of the most advanced construction materials, building methods, and techniquesfor a new connected and automated construction model Explores the digital transformation for smart energy buildings and their integration with emerging smartgrids and smart cities Reflects upon major findings and identifies emerging market opportunities for the whole AECO sector
Download or read book Waste Recycling Technologies for Nanomaterials Manufacturing written by Abdel Salam Hamdy Makhlouf and published by Springer Nature. This book was released on 2021-05-09 with total page 870 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses the recent advances in the wastes recycling technologies to provide low-cost and alternative ways for nanomaterials production. It shows how carbon nanomaterials can be synthesized from different waste sources such as banana fibers, argan (Argania spinosa) seed shells, corn grains, camellia oleifera shell, sugar cane bagasse, oil palm (empty fruit bunches and leaves) and palm kernel shells. Several nanostructured metal oxides (MnO2, Co3O4,....) can be synthesized via recycling of spent batteries. The recovered nanomaterials can be applied in many applications including: Energy (supercapacitors, solar cells, etc.) water treatments (heavy metal ions and dyes removal) and other applications. Spent battery and agriculture waste are rich precursors for metals and carbon, respectively. The book also explores the various recycling techniques, agriculture waste recycling, batteries recycling, and different applications of the recycled materials.
Download or read book Phase Change Materials and Their Applications written by Mohsen Mhadhbi and published by BoD – Books on Demand. This book was released on 2018-08-01 with total page 176 pages. Available in PDF, EPUB and Kindle. Book excerpt: Today, the application of phase change materials (PCMs) has developed in different industries, including the solar cooling and solar power plants, photovoltaic electricity systems, the space industry, waste heat recovery systems, preservation of food and pharmaceutical products, and domestic hot water. PCMs use the principle of latent heat thermal storage to absorb energy in large quantities when there is a surplus and release it when there is a deficit. This promising technology has already been successfully implemented in many construction projects. The aim of this book is to assist the scientists and to provide the reader with a comprehensive overview of the properties that characterize the phase change materials from theoretical and experimental perspectives with a focus on their technological applications. The present status and future perspectives of phase change material are discussed.
Download or read book Cement lime Mortars written by Harry Vincent Johnson and published by . This book was released on 1926 with total page 36 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Polymer Particles written by Masayoshi Okubo and published by Springer Science & Business Media. This book was released on 2005-02-10 with total page 388 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this special volume on polymer particles, recent trends and developments in the synthesis of nano- to micron-sized polymer particles by radical polymerization (Emulsion, Miniemulsion, Microemulsion, and Dispersion Polymerizations) of vinyl monomers in environmentally friendly heterogeneous aqueous and supercritical carbon dioxide fluid media are reviewed by prominent worldwide researchers. In addition to the important challenges and possibilities with regards to design and preparation of functionalized polymer particles of controlled size, the topics described are of great current interest due to the increased awareness of environmental issues.
Download or read book Thermal Energy Storage written by Hafiz Muhammad Ali and published by Springer Nature. This book was released on 2021-04-12 with total page 117 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers various aspects of thermal energy storage. It looks at storage methods for thermal energy and reviews the various materials that store thermal energy and goes on to propose advanced materials that store energy better than conventional materials. The book also presents various thermophysical properties of advanced materials and the role of thermal energy storage in different applications such as buildings, solar energy, seawater desalination and cooling devices. The advanced energy storage materials have massive impact on heat transfer as compared to conventional energy storage materials. A concise discussion regarding current status, leading groups, journals and the countries working on advanced energy storage materials has also been provided. This book is useful to researchers, professionals and policymakers alike.
Download or read book Composite Materials written by Kamal K. Kar and published by Springer. This book was released on 2016-10-14 with total page 686 pages. Available in PDF, EPUB and Kindle. Book excerpt: Composite materials are used as substitutions of metals/traditional materials in aerospace, automotive, civil, mechanical and other industries. The present book collects the current knowledge and recent developments in the characterization and application of composite materials. To this purpose the volume describes the outstanding properties of this class of advanced material which recommend it for various industrial applications.
Download or read book Graphene Oxide in Enhancing Energy Storage Devices written by Fabian Ifeanyichukwu Ezema and published by CRC Press. This book was released on 2022-12-14 with total page 332 pages. Available in PDF, EPUB and Kindle. Book excerpt: The world is filled with electronics devices that use batteries and supercapacitors, such as laptops, cellphones, and cameras, creating the need for the efficient and effective production of good energy storage devices. The depletion of fossil fuels demands alternative sources of energy, which prompted the creation of solar cell (PV) technologies and fuel cells. The introduction of graphene oxides to these technologies help improve the performance of various energy storage and conversion devices. This book provides a broad review of graphene oxide synthesis and applications in various energy storage devices. The chapters explore various fundamental principles and the foundations of different energy conversion and storage devices with respect to their advancement due to emergence of graphene oxide, such as supercapacitors, batteries and fuel cells. This book will enable research towards improving the performance of various energy storage devices using graphene oxides and will be a valuable reference for researchers and scientists working across physics, engineering, and chemistry on different types of graphene oxide-based energy storage and conversion devices.
Download or read book Handbook of Fibrous Materials 2 Volumes written by Jinlian Hu and published by John Wiley & Sons. This book was released on 2020-06-22 with total page 1040 pages. Available in PDF, EPUB and Kindle. Book excerpt: Edited by a leading expert in the field with contributions from experienced researchers in fibers and textiles, this handbook reviews the current state of fibrous materials and provides a broad overview of their use in research and development. Volume One focuses on the classes of fibers, their production and characterization, while the second volume concentrates on their applications, including emerging ones in the areas of energy, environmental science and healthcare. Unparalleled knowledge of high relevance to academia and industry.
Download or read book Gravity Energy Storage written by Asmae Berrada and published by Elsevier. This book was released on 2019-05-21 with total page 186 pages. Available in PDF, EPUB and Kindle. Book excerpt: Gravity Energy Storage provides a comprehensive analysis of a novel energy storage system that is based on the working principle of well-established, pumped hydro energy storage, but that also recognizes the differences and benefits of the new gravity system. This book provides coverage of the development, feasibility, design, performance, operation, and economics associated with the implementation of such storage technology. In addition, a number of modeling approaches are proposed as a solution to various difficulties, such as proper sizing, application, value and optimal design of the system. The book includes both technical and economic aspects to guide the realization of this storage system in the right direction. Finally, political considerations and barriers are addressed to complement this work. Discusses the feasibility of gravity energy storage technology Analyzes the storage system by modelling various system components Uniquely discusses the characteristics of this technology, giving consideration to its use as an attractive solution to the integration of large-scale, intermittent renewable energy
Download or read book Encyclopedia of Polymer Applications 3 Volume Set written by Munmaya Mishra and published by CRC Press. This book was released on 2018-12-17 with total page 6778 pages. Available in PDF, EPUB and Kindle. Book excerpt: Undoubtedly the applications of polymers are rapidly evolving. Technology is continually changing and quickly advancing as polymers are needed to solve a variety of day-to-day challenges leading to improvements in quality of life. The Encyclopedia of Polymer Applications presents state-of-the-art research and development on the applications of polymers. This groundbreaking work provides important overviews to help stimulate further advancements in all areas of polymers. This comprehensive multi-volume reference includes articles contributed from a diverse and global team of renowned researchers. It offers a broad-based perspective on a multitude of topics in a variety of applications, as well as detailed research information, figures, tables, illustrations, and references. The encyclopedia provides introductions, classifications, properties, selection, types, technologies, shelf-life, recycling, testing and applications for each of the entries where applicable. It features critical content for both novices and experts including, engineers, scientists (polymer scientists, materials scientists, biomedical engineers, macromolecular chemists), researchers, and students, as well as interested readers in academia, industry, and research institutions.
Download or read book Theory of Heat Pipes written by T. P. Cotter and published by . This book was released on 1965 with total page 44 pages. Available in PDF, EPUB and Kindle. Book excerpt: A heat pipe is a self-contained structure which achieves very high thermal conductance by means of two-phase fluid flow with capillary circulation. A quantitative engineering theory for the design and performance analysis of heat pipes is given.
