Download or read book A TEXTBOOK OF CHEMICAL ENGINEERING THERMODYNAMICS written by K. V. NARAYANAN and published by PHI Learning Pvt. Ltd.. This book was released on 2013-01-11 with total page 528 pages. Available in PDF, EPUB and Kindle. Book excerpt: Designed as an undergraduate-level textbook in Chemical Engineering, this student-friendly, thoroughly class-room tested book, now in its second edition, continues to provide an in-depth analysis of chemical engineering thermodynamics. The book has been so organized that it gives comprehensive coverage of basic concepts and applications of the laws of thermodynamics in the initial chapters, while the later chapters focus at length on important areas of study falling under the realm of chemical thermodynamics. The reader is thus introduced to a thorough analysis of the fundamental laws of thermodynamics as well as their applications to practical situations. This is followed by a detailed discussion on relationships among thermodynamic properties and an exhaustive treatment on the thermodynamic properties of solutions. The role of phase equilibrium thermodynamics in design, analysis, and operation of chemical separation methods is also deftly dealt with. Finally, the chemical reaction equilibria are skillfully explained. Besides numerous illustrations, the book contains over 200 worked examples, over 400 exercise problems (all with answers) and several objective-type questions, which enable students to gain an in-depth understanding of the concepts and theory discussed. The book will also be a useful text for students pursuing courses in chemical engineering-related branches such as polymer engineering, petroleum engineering, and safety and environmental engineering. New to This Edition • More Example Problems and Exercise Questions in each chapter • Updated section on Vapour–Liquid Equilibrium in Chapter 8 to highlight the significance of equations of state approach • GATE Questions up to 2012 with answers

Download or read book Thermodynamics of Hydrocarbon Reservoirs written by Abbas Firoozabadi and published by McGraw Hill Professional. This book was released on 1999-01-22 with total page 382 pages. Available in PDF, EPUB and Kindle. Book excerpt: Publisher's Note: Products purchased from Third Party sellers are not guaranteed by the publisher for quality, authenticity, or access to any online entitlements included with the product. Modern look at the thermodynamics of hydrocarbon reservoirs This brilliant, original work offers novel formulations of thermodynamic principles for hydrocarbon reservoirs. The book is packed with valuable step-by-step derivations for retrograde phenomena in capillaries, diffusion and convection, stability and criticality in mixtures, precipitation from complex mixtures, and numerous examples that show in detail how to calculate and apply concepts using the most contemporary techniques. The book is not only a valuable reference for petroleum and chemical engineers, but can be used by engineers and scientists in different disciplines.

Download or read book Chemical Engineering Design written by Gavin Towler and published by Elsevier. This book was released on 2012-01-25 with total page 1321 pages. Available in PDF, EPUB and Kindle. Book excerpt: Chemical Engineering Design, Second Edition, deals with the application of chemical engineering principles to the design of chemical processes and equipment. Revised throughout, this edition has been specifically developed for the U.S. market. It provides the latest US codes and standards, including API, ASME and ISA design codes and ANSI standards. It contains new discussions of conceptual plant design, flowsheet development, and revamp design; extended coverage of capital cost estimation, process costing, and economics; and new chapters on equipment selection, reactor design, and solids handling processes. A rigorous pedagogy assists learning, with detailed worked examples, end of chapter exercises, plus supporting data, and Excel spreadsheet calculations, plus over 150 Patent References for downloading from the companion website. Extensive instructor resources, including 1170 lecture slides and a fully worked solutions manual are available to adopting instructors. This text is designed for chemical and biochemical engineering students (senior undergraduate year, plus appropriate for capstone design courses where taken, plus graduates) and lecturers/tutors, and professionals in industry (chemical process, biochemical, pharmaceutical, petrochemical sectors). New to this edition: - Revised organization into Part I: Process Design, and Part II: Plant Design. The broad themes of Part I are flowsheet development, economic analysis, safety and environmental impact and optimization. Part II contains chapters on equipment design and selection that can be used as supplements to a lecture course or as essential references for students or practicing engineers working on design projects. - New discussion of conceptual plant design, flowsheet development and revamp design - Significantly increased coverage of capital cost estimation, process costing and economics - New chapters on equipment selection, reactor design and solids handling processes - New sections on fermentation, adsorption, membrane separations, ion exchange and chromatography - Increased coverage of batch processing, food, pharmaceutical and biological processes - All equipment chapters in Part II revised and updated with current information - Updated throughout for latest US codes and standards, including API, ASME and ISA design codes and ANSI standards - Additional worked examples and homework problems - The most complete and up to date coverage of equipment selection - 108 realistic commercial design projects from diverse industries - A rigorous pedagogy assists learning, with detailed worked examples, end of chapter exercises, plus supporting data and Excel spreadsheet calculations plus over 150 Patent References, for downloading from the companion website - Extensive instructor resources: 1170 lecture slides plus fully worked solutions manual available to adopting instructors

Download or read book The Software Encyclopedia written by and published by . This book was released on 1991 with total page 1344 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Efficient Simulation of Thermal Enhanced Oil Recovery Processes written by Zhouyuan Zhu and published by Stanford University. This book was released on 2011 with total page 237 pages. Available in PDF, EPUB and Kindle. Book excerpt: Simulating thermal processes is usually computationally expensive because of the complexity of the problem and strong nonlinearities encountered. In this work, we explore novel and efficient simulation techniques to solve thermal enhanced oil recovery problems. We focus on two major topics: the extension of streamline simulation for thermal enhanced oil recovery and the efficient simulation of chemical reaction kinetics as applied to the in-situ combustion process. For thermal streamline simulation, we first study the extension to hot water flood processes, in which we have temperature induced viscosity changes and thermal volume changes. We first compute the pressure field on an Eulerian grid. We then solve for the advective parts of the mass balance and energy equations along the individual streamlines, accounting for the compressibility effects. At the end of each global time step, we account for the nonadvective terms on the Eulerian grid along with gravity using operator splitting. We test our streamline simulator and compare the results with a commercial thermal simulator. Sensitivity studies for compressibility, gravity and thermal conduction effects are presented. We further extended our thermal streamline simulation to steam flooding. Steam flooding exhibits large volume changes and compressibility associated with the phase behavior of steam, strong gravity segregation and override, and highly coupled energy and mass transport. To overcome these challenges we implement a novel pressure update along the streamlines, a Glowinski scheme operator splitting and a preliminary streamline/finite volume hybrid approach. We tested our streamline simulator on a series of test cases. We compared our thermal streamline results with those computed by a commercial thermal simulator for both accuracy and efficiency. For the cases investigated, we are able to retain solution accuracy, while reducing computational cost and gaining connectivity information from the streamlines. These aspects are useful for reservoir engineering purposes. In traditional thermal reactive reservoir simulation, mass and energy balance equations are solved numerically on discretized reservoir grid blocks. The reaction terms are calculated through Arrhenius kinetics using cell-averaged properties, such as averaged temperature and reactant concentrations. For the in-situ combustion process, the chemical reaction front is physically very narrow, typically a few inches thick. To capture accurately this front, centimeter-sized grids are required that are orders of magnitude smaller than the affordable grid block sizes for full field reservoir models. To solve this grid size effect problem, we propose a new method based on a non-Arrhenius reaction upscaling approach. We do not resolve the combustion front on the grid, but instead use a subgrid-scale model that captures the overall effects of the combustion reactions on flow and transport, i.e. the amount of heat released, the amount of oil burned and the reaction products generated. The subgrid-scale model is calibrated using fine-scale highly accurate numerical simulation and laboratory experiments. This approach significantly improves the computational speed of in-situ combustion simulation as compared to traditional methods. We propose the detailed procedures to implement this methodology in a field-scale simulator. Test cases illustrate the solution consistency when scaling up the grid sizes in multidimensional heterogeneous problems. The methodology is also applicable to other subsurface reactive flow modeling problems with fast chemical reactions and sharp fronts. Displacement front stability is a major concern in the design of all the enhanced oil recovery processes. Historically, premature combustion front break through has been an issue for field operations of in-situ combustion. In this work, we perform detailed analysis based on both analytical methods and numerical simulation. We identify the different flow regimes and several driving fronts in a typical 1D ISC process. For the ISC process in a conventional mobile heavy oil reservoir, we identify the most critical front as the front of steam plateau driving the cold oil bank. We discuss the five main contributors for this front stability/instability: viscous force, condensation, heat conduction, coke plugging and gravity. Detailed numerical tests are performed to test and rank the relative importance of all these different effects.

Download or read book Selected Properties of Hydrogen engineering Design Data written by Robert D. McCarty and published by . This book was released on 1981 with total page 540 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Chemical Abstracts written by and published by . This book was released on 2002 with total page 2710 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Rules of Thumb for Mechanical Engineers written by J. Edward Pope and published by Gulf Professional Publishing. This book was released on 1997 with total page 417 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fluids -- Heat transfer -- Thermodynamics -- Mechanical seals -- Pumps and compressors -- Drivers -- Gears -- Bearings -- Piping and pressure vessels -- Tribology -- Vibration -- Materials -- Stress and strain -- Fatigue -- Instrumentation -- Engineering economics.

Download or read book Using Aspen Plus in Thermodynamics Instruction written by Stanley I. Sandler and published by John Wiley & Sons. This book was released on 2015-04-06 with total page 372 pages. Available in PDF, EPUB and Kindle. Book excerpt: A step-by-step guide for students (and faculty) on the use of Aspen in teaching thermodynamics • Easily-accessible modern computational techniques opening up new vistas in teaching thermodynamics A range of applications of Aspen Plus in the prediction and calculation of thermodynamic properties and phase behavior using the state-of-the art methods • Encourages students to develop engineering insight by doing repetitive calculations with changes in parameters and/or models • Calculations and application examples in a step-by-step manner designed for out-of-classroom self-study • Makes it possible to easily integrate Aspen Plus into thermodynamics courses without using in-class time • Stresses the application of thermodynamics to real problems

Download or read book Equations of State written by Kwang-chu Chao and published by . This book was released on 1986 with total page 616 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Phase Behavior of Petroleum Reservoir Fluids written by Karen Schou Pedersen and published by CRC Press. This book was released on 2006-11-01 with total page 423 pages. Available in PDF, EPUB and Kindle. Book excerpt: Understanding the phase behavior of the various fluids present in a petroleum reservoir is essential for achieving optimal design and cost-effective operations in a petroleum processing plant. Taking advantage of the authors' experience in petroleum processing under challenging conditions, Phase Behavior of Petroleum Reservoir Fluids introdu

Download or read book Petroleum Reservoir Simulation written by J.H. Abou-Kassem and published by Gulf Professional Publishing. This book was released on 2020-01-14 with total page 526 pages. Available in PDF, EPUB and Kindle. Book excerpt: Petroleum Reservoir Simulation, Second Edition, introduces this novel engineering approach for petroleum reservoir modeling and operations simulations. Updated with new exercises, a new glossary and a new chapter on how to create the data to run a simulation, this comprehensive reference presents step-by-step numerical procedures in an easy to understand format. Packed with practical examples and guidelines, this updated edition continues to deliver an essential tool for all petroleum and reservoir engineers.

Download or read book Combustion Chemistry written by W. C. Jr. Gardiner and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 515 pages. Available in PDF, EPUB and Kindle. Book excerpt: Detailed study of the rates and mechanisms of combustion reactions has not been in the mainstream of combustion research until the recent recognition that further progress in optimizing burner performance and reducing pollutant emission can only be done with fundamental understanding of combustion chemistry. This has become apparent at a time when our understanding of the chemistry, at least of small-molecule combustion, and our ability to model combustion processes on large computers have developed to the point that real confidence can be placed in the results. This book is an introduction for outsiders or beginners as well as a reference work for people already active in the field. Because the spectrum of combustion scientists ranges from chemists with little computing experience to engineers who have had only one college chemistry course, everything needed to bring all kinds of beginners up to the level of current practice in detailed combustion modeling is included. It was a temptation to include critical discussions of modeling results and computer programs that would enable outsiders to start quickly into problem solving. We elected not to do either, because we feel that the former are better put into the primary research literature and that people who are going to do combustion modeling should either write their own programs or collaborate with experts. The only exception to this is in the thermochemical area, where programs have been included to do routine fitting operations. For reference purposes there are tables of thermochemical, transport-property, and rate coefficient data.

Download or read book Thermodynamics and Energy Conversion written by Henning Struchtrup and published by Springer. This book was released on 2014-07-02 with total page 596 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook gives a thorough treatment of engineering thermodynamics with applications to classical and modern energy conversion devices. Some emphasis lies on the description of irreversible processes, such as friction, heat transfer and mixing and the evaluation of the related work losses. Better use of resources requires high efficiencies therefore the reduction of irreversible losses should be seen as one of the main goals of a thermal engineer. This book provides the necessary tools. Topics include: car and aircraft engines, including Otto, Diesel and Atkinson cycles, by-pass turbofan engines, ramjet and scramjet; steam and gas power plants, including advanced regenerative systems, solar tower and compressed air energy storage; mixing and separation, including reverse osmosis, osmotic power plants and carbon sequestration; phase equilibrium and chemical equilibrium, distillation, chemical reactors, combustion processes and fuel cells; the microscopic definition of entropy. The book includes about 300 end-of-chapter problems for homework assignments and exams. The material presented suffices for two or three full-term courses on thermodynamics and energy conversion.

Download or read book Industrial Gas Handbook written by Frank G. Kerry and published by CRC Press. This book was released on 2007-02-22 with total page 552 pages. Available in PDF, EPUB and Kindle. Book excerpt: Drawing on Frank G. Kerry's more than 60 years of experience as a practicing engineer, the Industrial Gas Handbook: Gas Separation and Purification provides from-the-trenches advice that helps practicing engineers master and advance in the field. It offers detailed discussions and up-to-date approaches to process cycles for cryogenic separation of

Download or read book Handbook of Chemical Engineering Calculations written by Nicholas P. Chopey and published by McGraw-Hill Professional Publishing. This book was released on 1994 with total page 640 pages. Available in PDF, EPUB and Kindle. Book excerpt: A compilation of the calculation procedures needed every day on the job by chemical engineers. Tables of Contents: Physical and Chemical Properties; Stoichiometry; Phase Equilibrium; Chemical-Reaction Equilibrium; Reaction Kinetics and Reactor Design; Flow of Fluids and Solids; Heat Transfer; Distillation; Extraction and Leaching; Crystallization; Filtration; Liquid Agitation; Size Reduction; Drying: Evaporation; Environmental Engineering in the Plant. Illustrations. Index.

Download or read book Thermal Recovery Processes written by Society of Petroleum Engineers of AIME. and published by . This book was released on 1964 with total page 180 pages. Available in PDF, EPUB and Kindle. Book excerpt: