Download or read book Phase and Flow Behavior in Petroleum Production written by Edward Jack Hoffman and published by . This book was released on 1981 with total page 936 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fluid Phase Behavior for Conventional and Unconventional Oil and Gas Reservoirs written by Alireza Bahadori and published by Gulf Professional Publishing. This book was released on 2016-11-24 with total page 556 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fluid Phase Behavior for Conventional and Unconventional Oil and Gas Reservoirs delivers information on the role of PVT (pressure-volume-temperature) tests/data in various aspects, in particular reserve estimation, reservoir modeling, flow assurance, and enhanced oil recovery for both conventional and unconventional reservoirs. This must-have reference also prepares engineers on the importance of PVT tests, how to evaluate the data, develop an effective management plan for flow assurance, and gain perspective of flow characterization, with a particular focus on shale oil, shale gas, gas hydrates, and tight oil making. This book is a critical resource for today’s reservoir engineer, helping them effectively manage and maximize a company’s oil and gas reservoir assets. Provides tactics on reservoir phase behavior and dynamics with new information on shale oil and gas hydrates Helps readers Improve on the effect of salt concentration and application to C02-Acid Gas Disposal with content on water-hydrocarbon systems Provides practical experience with PVT and tuning of EOS with additional online excel spreadsheet examples
Download or read book Unsteady state Fluid Flow written by E.J. Hoffman and published by Elsevier. This book was released on 1999-07-02 with total page 484 pages. Available in PDF, EPUB and Kindle. Book excerpt: The ubiquitous examples of unsteady-state fluid flow pertain to the production or depletion of oil and gas reservoirs. After introductory information about petroleum-bearing formations and fields, reservoirs, and geologic codes, empirical methods for correlating and predicting unsteady-state behavior are presented. This is followed by a more theoretical presentation based on the classical partial differential equations for flow through porous media.Whereas these equations can be simplified for the flow of (compressible) fluids, and idealized solutions exist in terms of Fourier series for linear flow and Bessel functions for radial flow, the flow of compressible gases requires computer solutions, read approximations. An analysis of computer solutions indicates, fortuitously, that the unsteady-state behavior can be reproduced by steady-state density or pressure profiles at successive times. This will demark draw down and the transition to long-term depletion for reservoirs with closed outer boundaries.As an alternative, unsteady-state flow may be presented in terms of volume and surface integrals, and the methodology is fully developed with examples furnished. Among other things, permeability and reserves can be estimated from well flow tests.The foregoing leads to an examination of boundary conditions and degrees of freedom and raises arguments that the classical partial differential equations of mathematical physics may not be allowable representations. For so-called open petroleum reservoirs where say water-drive exists, the simplifications based on successive steady-state profiles provide a useful means of representation, which is detailed in the form of material balances. Unsteady-State Fluid Flow provides:• empirical and classical methods for correlating and predicting the unsteady-state behavior of petroleum reservoirs• analysis of unsteady-state behavior, both in terms of the classical partial differential equations, and in terms of volume and surface integrals• simplifications based on successive steady-state profiles which permit application to the depletion of both closed reservoirs and open reservoirs, and serves to distinguish drawdown, transition and long-term depletion performance.
Download or read book Phase Behavior of Petroleum Reservoir Fluids written by Karen Schou Pedersen and published by CRC Press. This book was released on 2006-11-01 with total page 423 pages. Available in PDF, EPUB and Kindle. Book excerpt: Understanding the phase behavior of the various fluids present in a petroleum reservoir is essential for achieving optimal design and cost-effective operations in a petroleum processing plant. Taking advantage of the authors' experience in petroleum processing under challenging conditions, Phase Behavior of Petroleum Reservoir Fluids introdu
Download or read book Petroleum Fluid Phase Behavior written by Raj Deo Tewari and published by CRC Press. This book was released on 2018-12-14 with total page 412 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book deals with complex fluid characterization of oil and gas reservoirs, emphasizing the importance of PVT parameters for practical application in reservoir simulation and management. It covers modeling of PVT parameters, QA/QC of PVT data from lab studies, EOS modeling, PVT simulation and compositional grading and variation. It describes generation of data for reservoir engineering calculations in view of limited and unreliable data and techniques like downhole fluid analysis and photophysics of reservoir fluids. It discusses behavior of unconventional reservoirs, particularly for difficult resources like shale gas, shale oil, coalbed methane, reservoirs, heavy and extra heavy oils.
Download or read book PVT and Phase Behaviour Of Petroleum Reservoir Fluids written by Ali Danesh and published by Elsevier. This book was released on 1998-05-07 with total page 401 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book on PVT and Phase Behaviour Of Petroleum Reservoir Fluids is volume 47 in the Developments in Petroleum Science series. The chapters in the book are: Phase Behaviour Fundamentals, PVT Tests and Correlations, Phase Equilibria, Equations of State, Phase Behaviour Calculations, Fluid Characterisation, Gas Injection, Interfacial Tension, and Application in Reservoir Simulation.
Download or read book Physics of Petroleum Reservoirs written by Xuetao Hu and published by Springer. This book was released on 2017-08-08 with total page 516 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces in detail the physical and chemical phenomena and processes during petroleum production. It covers the properties of reservoir rocks and fluids, the related methods of determining these properties, the phase behavior of hydrocarbon mixtures, the microscopic mechanism of fluids flowing through reservoir rocks, and the primary theories and methods of enhancing oil recovery. It also involves the up-to-date progress in these areas. It can be used as a reference by researchers and engineers in petroleum engineering and a textbook for students majoring in the area related with petroleum exploitation.
Download or read book Advancements of Phase Behavior and Fluid Transport in Petroleum Reservoirs written by Xiaohu Dong and published by Frontiers Media SA. This book was released on 2022-06-30 with total page 102 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Petroleum Production Systems written by Michael J. Economides and published by Pearson Education. This book was released on 2013 with total page 752 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by four leading experts, this edition thoroughly introduces today's modern principles of petroleum production systems development and operation, considering the combined behaviour of reservoirs, surface equipment, pipeline systems, and storage facilities. The authors address key issues including artificial lift, well diagnosis, matrix stimulation, hydraulic fracturing and sand control. They show how to optimise systems for diverse production schedules using queuing theory, as well as linear and dynamic programming. Throughout, they provide both best practices and rationales, fully illuminating the exploitation of unconventional oil and gas reservoirs. Updates include: Extensive new coverage of hydraulic fracturing, including high permeability fracturing New sand and water management techniques * An all-new chapter on Production Analysis New coverage of digital reservoirs and self-learning techniques New skin correlations and HW flow techniques
Download or read book Multiphase Transport of Hydrocarbons in Pipes written by Juan J. Manzano-Ruiz and published by John Wiley & Sons. This book was released on 2024-03-26 with total page 356 pages. Available in PDF, EPUB and Kindle. Book excerpt: Multiphase Transport of Hydrocarbons in Pipes An introduction to multiphase flows in the oil and gas industry The term ‘multiphase flow’ refers to the concurrent flow of oil and/or gas, alongside other substances or materials such as production water, chemical inhibitors, and solids (e.g. sand). This is a critical topic in the oil and gas industry, where the presence of multiple flow phases in pipelines affects deliverability, generates serious complications in predicting flow performance for system design and operation, and requires specific risk mitigation actions and continuous maintenance. Chemical and Mechanical Engineers interested in working in this industry will benefit from understanding the basic theories and practices required to model and operate multiphase flows through pipelines, wells, and other components of the production system. Multiphase Transport of Hydrocarbons in Pipes meets this need with a comprehensive overview of five decades of research into multiphase flow. Incorporating fundamental theories, historic and cutting-edge multiphase flow models, and concrete examples of current and future applications. This book provides a sound technical background for prospective or working engineers in need of understanding this crucial area of industry. Readers will also find: Fundamental principles supporting commercial software Detailed tools for estimating multiphase flow rates through flowlines, wells, and more Integration of conservation principles with thermodynamic and transport properties Coverage of legacy and modern simulation models This book is ideal for flow assurance engineers, facilities engineers, oil and gas production engineers, and process engineers, as well as chemical and mechanical engineering students looking to work in any of these roles.
Download or read book Pipeline Flow Behavior of Water in oil Emulsions written by Ali Omer Abulkasim Omer and published by . This book was released on 2009 with total page 169 pages. Available in PDF, EPUB and Kindle. Book excerpt: Water-in-oil (W/O) emulsions consist of water droplets dispersed in continuous oil phase. They are encountered at various stages of oil production. The oil produced from an oil-well usually carries a significant amount of water in the form of droplets. In enhanced oil recovery techniques involving the injection of polymer solution, the aqueous phase of the water-in-oil emulsions produced from the oil well consists of polymeric additive. A good understanding of the flow behavior of emulsions in pipelines is essential for the design and operation of oil production-gathering facilities and emulsion pipelines. A number of studies have been reported on simultaneous flow of oil and water in pipelines. However, the studies reported in the literature are mainly focused on either oil-water flow patterns and separated flows (annular and stratified flow of oil and water phases) or oil-in-water (O/W) emulsion flows. The pipeline flow of water-in-oil (W/O) emulsions has received less attention. Also, little work has been carried out on the effect of additives such as polymer. In this study, new experimental results are presented on the pipeline flow behavior of water-in-oil (W/O) emulsions, with and without the presence of polymeric additive in the aqueous phase. The emulsions were prepared from three different oils, namely EDM-244, EDM-Monarch, and Shell Pella of different viscosities (2.5 mPa.s for EDM-244, 6 mPa.s for EDM-Monarch, and 5.4 mPa.s for Shell Pella, at 25 0C). The water-in-oil emulsions prepared from EDM-244 and EDM-Monarch (without any polymeric additive in the dispersed aqueous phase) exhibited drag reduction behavior in turbulent flow. The turbulent friction factor data of the emulsions fell well below the standard Blasius equation for smooth pipes. The water-in-oil emulsions prepared from EDM-244 exhibited stronger drag reduction as compared with the EDM-Monarch emulsions. The Shell Pella emulsions (w/o type) did not exhibit any drag reduction in turbulent flow; the friction factor data followed the Blasius equation. The Shell Pella emulsions were more stable than the EDM-244 and EDM-Monarch emulsions. When left unstirred, the EDM-244 and EDM-Monarch emulsions quickly coalesced into separate oil and water phases whereas the Shell Pella emulsions took significantly longer time to separate into oil and water phases. The Shell Pella oil emulsions were also milkier than the EDM emulsions. The addition of polymer to the dispersed aqueous phase of water-in-oil emulsions had a significant effect on the turbulent drag reduction behavior. Emulsions were less drag reducing when polymer was present in the aqueous droplets. The effect of surfactant on the pipeline flow behavior of water/oil emulsions was also investigated. The surfactant-stabilized water-in-oil emulsions followed the single phase flow behavior. The presence of surfactant in the emulsions caused the dispersed droplets to become significantly smaller. It is believed that the droplets were smaller than the scale of turbulence when surfactant was present and consequently no drag reduction was observed.
Download or read book Practical Aspects of Flow Assurance in the Petroleum Industry written by Jitendra Sangwai and published by CRC Press. This book was released on 2022-07-07 with total page 405 pages. Available in PDF, EPUB and Kindle. Book excerpt: With easily accessible oil reserves dwindling, petroleum engineers must have a sound understanding of how to access technically challenging resources, especially in the deepwater environment. These technically challenging resources bring with them complexities around fluid flow not normally associated with conventional production systems, and engineers must be knowledgeable about navigating these complexities. Practical Aspects of Flow Assurance in the Petroleum Industry aims to provide practical guidance on all aspects of flow assurance to offer readers a ready reference on how to ensure uninterrupted transport of processed fluids throughout the flow infrastructure by covering all practical aspects of flow assurance, being written in such a way that any engineer dealing with the oil and gas industry will be able to understand the material, containing solved examples on most topics, placing equal emphasis on experimental techniques and modeling methods, and devoting an entire chapter to the analysis and interpretation of published case studies. With its balance of theory and practical applications, this work provides petroleum engineers from a variety of backgrounds with the information needed to maintain and enhance productivity.
Download or read book Topics on Phase Behavior and Flow of Petroleum Reservoir Fluids written by Curtis H. Whitson and published by . This book was released on 1983 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Multiphase Flow in Wells written by James P. Brill and published by Henry L. Doherty Memorial Fund of Aime Society of Petroleum. This book was released on 1999 with total page 172 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Multiphase Fluid Flow in Porous and Fractured Reservoirs written by Yu-Shu Wu and published by Gulf Professional Publishing. This book was released on 2015-09-23 with total page 420 pages. Available in PDF, EPUB and Kindle. Book excerpt: Multiphase Fluid Flow in Porous and Fractured Reservoirs discusses the process of modeling fluid flow in petroleum and natural gas reservoirs, a practice that has become increasingly complex thanks to multiple fractures in horizontal drilling and the discovery of more unconventional reservoirs and resources. The book updates the reservoir engineer of today with the latest developments in reservoir simulation by combining a powerhouse of theory, analytical, and numerical methods to create stronger verification and validation modeling methods, ultimately improving recovery in stagnant and complex reservoirs. Going beyond the standard topics in past literature, coverage includes well treatment, Non-Newtonian fluids and rheological models, multiphase fluid coupled with geomechanics in reservoirs, and modeling applications for unconventional petroleum resources. The book equips today’s reservoir engineer and modeler with the most relevant tools and knowledge to establish and solidify stronger oil and gas recovery. Delivers updates on recent developments in reservoir simulation such as modeling approaches for multiphase flow simulation of fractured media and unconventional reservoirs Explains analytical solutions and approaches as well as applications to modeling verification for today’s reservoir problems, such as evaluating saturation and pressure profiles and recovery factors or displacement efficiency Utilize practical codes and programs featured from online companion website
Download or read book Working Guide to Petroleum and Natural Gas Production Engineering written by William Lyons and published by Gulf Professional Publishing. This book was released on 2009-09-16 with total page 315 pages. Available in PDF, EPUB and Kindle. Book excerpt: Working Guide to Petroleum and Natural Gas Production Engineering provides an introduction to key concepts and processes in oil and gas production engineering. It begins by describing correlation and procedures for predicting the physical properties of natural gas and oil. These include compressibility factor and phase behavior, field sampling process and laboratory measurements, and prediction of a vapor-liquid mixture. The book discusses the basic parameters of multiphase fluid flow, various flow regimes, and multiphase flow models. It explains the natural flow performance of oil, gas, and the mixture. The final chapter covers the design, use, function, operation, and maintenance of oil and gas production facilities; the design and construction of separators; and oil and gas separation and treatment systems. Evaluate well inflow performance Guide to properties of hydrocarbon mixtures Evaluate Gas production and processing facilities
Download or read book Essentials of Flow Assurance Solids in Oil and Gas Operations written by Abdullah Hussein and published by Gulf Professional Publishing. This book was released on 2022-10-19 with total page 1124 pages. Available in PDF, EPUB and Kindle. Book excerpt: Flow assurance solids deposition is one of the main challenges in oil and gas production operations with millions of dollars spent annually on their mitigation. Essentials of Flow Assurance Solids in Oil and Gas Operations works as an all-inclusive reference for engineers and researchers, covering all the different types of solids that are commonly encountered in oil and gas fields. Structured to flow through real-world operations, the reference branches through each solid deposit problem where the root causes are as well as modeling, monitoring, characterization, and management strategies, all comprehensively reviewed in the light of contemporary research breakthroughs. Backed by several field case studies, Essentials of Flow Assurance Solids in Oil and Gas Operations gives petroleum and reservoir engineers a resource to correlate between the theoretical fundamentals and field practical applications allowing for sustainable and optimal operations. Provides the main operations of oil and gas fields, the characteristics of produced fluids, and the main flow assurance challenges Furnishes the basic principles of deposits formation and mitigation, starting with a full investigation of the problems, then mechanisms, causes, predictions, modelling, and sample analysis, followed by management Distinctively discusses the operational and environmental implications of flow assurance solids and their management using chemical and nonchemical methods Teaches engineers through impactful visuals and data sets included in every chapter
