Download or read book Petroleum Transportation and Production written by Marshall Sittig and published by William Andrew. This book was released on 1978 with total page 372 pages. Available in PDF, EPUB and Kindle. Book excerpt: Review of U.S. patents, government reports, and technical journal literature dealing with the control of pollution from the production, transportation, and storage of petroleum products.
Download or read book Transportation Energy Data Book written by and published by . This book was released on 2005 with total page 340 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Production and Transport of Oil and Gas Gathering and transportation written by A. Pál Szilas and published by . This book was released on 1985 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Hidden Costs of Energy written by National Research Council and published by National Academies Press. This book was released on 2010-05-26 with total page 506 pages. Available in PDF, EPUB and Kindle. Book excerpt: Despite the many benefits of energy, most of which are reflected in energy market prices, the production, distribution, and use of energy causes negative effects. Many of these negative effects are not reflected in energy market prices. When market failures like this occur, there may be a case for government interventions in the form of regulations, taxes, fees, tradable permits, or other instruments that will motivate recognition of these external or hidden costs. The Hidden Costs of Energy defines and evaluates key external costs and benefits that are associated with the production, distribution, and use of energy, but are not reflected in market prices. The damage estimates presented are substantial and reflect damages from air pollution associated with electricity generation, motor vehicle transportation, and heat generation. The book also considers other effects not quantified in dollar amounts, such as damages from climate change, effects of some air pollutants such as mercury, and risks to national security. While not a comprehensive guide to policy, this analysis indicates that major initiatives to further reduce other emissions, improve energy efficiency, or shift to a cleaner electricity generating mix could substantially reduce the damages of external effects. A first step in minimizing the adverse consequences of new energy technologies is to better understand these external effects and damages. The Hidden Costs of Energy will therefore be a vital informational tool for government policy makers, scientists, and economists in even the earliest stages of research and development on energy technologies.
Download or read book Production and transport of oil and gas written by A. Pál Szilas and published by . This book was released on 1986 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Production and transport of oil and gas written by and published by Elsevier. This book was released on 2010-05-22 with total page 633 pages. Available in PDF, EPUB and Kindle. Book excerpt: Production and transport of oil and gas
Download or read book Oil and Gas Production Handbook An Introduction to Oil and Gas Production written by Havard Devold and published by Lulu.com. This book was released on 2013 with total page 84 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Alternative Fuels for Transportation written by A S Ramadhas and published by CRC Press. This book was released on 2016-04-19 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt: Exploring how to counteract the world's energy insecurity and environmental pollution, this volume covers the production methods, properties, storage, engine tests, system modification, transportation and distribution, economics, safety aspects, applications, and material compatibility of alternative fuels. The esteemed editor highlights the importance of moving toward alternative fuels and the problems and environmental impact of depending on petroleum products. Each self-contained chapter focuses on a particular fuel source, including vegetable oils, biodiesel, methanol, ethanol, dimethyl ether, liquefied petroleum gas, natural gas, hydrogen, electric, fuel cells, and fuel from nonfood crops.
Download or read book Petroleum Waste Treatment and Pollution Control written by Shahryar Jafarinejad and published by Butterworth-Heinemann. This book was released on 2016-10-18 with total page 380 pages. Available in PDF, EPUB and Kindle. Book excerpt: Petroleum Waste Treatment and Pollution Control combines state-of-the-art and traditional treatment and control methods for removing, controlling, and treating problems, such as groundwater contamination, aromatics, oil, grease, organic removal, and VOCs. The book is divided into seven chapters, with the first briefly introducing readers to the petroleum industry. The second and third chapters explain wastes in the petroleum industry and focus on its environmental impact, its regulations, and protection options. Chapters four, five, and six discuss the treatment of air emissions, oily wastewater, solid wastes, and disposal methods.. The final chapter provides remediation processes. Presents the latest methods for treating, controlling, and eliminating pollutants from air, water, and land that are a byproduct of petroleum industry operations Covers the environmental impact of the petroleum industry and its regulations, explaining protection options Includes treatment methods for both air, water, and solid waste disposal Discusses remediation processes, including natural processes, pump and treat, soil flushing, soil vapor extraction (SVE), bioremediation, and excavation
Download or read book Gathering and Transportation written by A. Pál Szilas and published by Elsevier. This book was released on 1985 with total page 354 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Oil in the Sea III written by National Research Council and published by National Academies Press. This book was released on 2003-03-14 with total page 278 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since the early 1970s, experts have recognized that petroleum pollutants were being discharged in marine waters worldwide, from oil spills, vessel operations, and land-based sources. Public attention to oil spills has forced improvements. Still, a considerable amount of oil is discharged yearly into sensitive coastal environments. Oil in the Sea provides the best available estimate of oil pollutant discharge into marine waters, including an evaluation of the methods for assessing petroleum load and a discussion about the concerns these loads represent. Featuring close-up looks at the Exxon Valdez spill and other notable events, the book identifies important research questions and makes recommendations for better analysis ofâ€"and more effective measures againstâ€"pollutant discharge. The book discusses: Inputâ€"where the discharges come from, including the role of two-stroke engines used on recreational craft. Behavior or fateâ€"how oil is affected by processes such as evaporation as it moves through the marine environment. Effectsâ€"what we know about the effects of petroleum hydrocarbons on marine organisms and ecosystems. Providing a needed update on a problem of international importance, this book will be of interest to energy policy makers, industry officials and managers, engineers and researchers, and advocates for the marine environment.
Download or read book Production and transport of oil and gas written by A. Pál Szilas and published by . This book was released on 1985 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Management of Bulk Petroleum Products Storage and Distribution Facilities written by United States. Assistant Secretary of Defense (Production and Logistics) and published by . This book was released on 1988 with total page 932 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Petroleum Production Engineering written by Boyun Guo and published by Gulf Professional Publishing. This book was released on 2017-02-10 with total page 782 pages. Available in PDF, EPUB and Kindle. Book excerpt: Petroleum Production Engineering, Second Edition, updates both the new and veteran engineer on how to employ day-to-day production fundamentals to solve real-world challenges with modern technology. Enhanced to include equations and references with today’s more complex systems, such as working with horizontal wells, workovers, and an entire new section of chapters dedicated to flow assurance, this go-to reference remains the most all-inclusive source for answering all upstream and midstream production issues. Completely updated with five sections covering the entire production spectrum, including well productivity, equipment and facilities, well stimulation and workover, artificial lift methods, and flow assurance, this updated edition continues to deliver the most practical applied production techniques, answers, and methods for today’s production engineer and manager. In addition, updated Excel spreadsheets that cover the most critical production equations from the book are included for download. Updated to cover today’s critical production challenges, such as flow assurance, horizontal and multi-lateral wells, and workovers Guides users from theory to practical application with the help of over 50 online Excel spreadsheets that contain basic production equations, such as gas lift potential, multilateral gas well deliverability, and production forecasting Delivers an all-inclusive product with real-world answers for training or quick look up solutions for the entire petroleum production spectrum
Download or read book Biomass Gasification and Pyrolysis written by Prabir Basu and published by Academic Press. This book was released on 2010-07-19 with total page 377 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers comprehensive coverage of the design, analysis, and operational aspects of biomass gasification, the key technology enabling the production of biofuels from all viable sources--some examples being sugar cane and switchgrass. This versatile resource not only explains the basic principles of energy conversion systems, but also provides valuable insight into the design of biomass gasifiers. The author provides many worked out design problems, step-by-step design procedures and real data on commercially operating systems. After fossil fuels, biomass is the most widely used fuel in the world. Biomass resources show a considerable potential in the long term if residues are properly handled and dedicated energy crops are grown. Includes step-by-step design procedures and case studies for Biomass GasificationProvides worked process flow diagrams for gasifier design. Covers integration with other technologies (e.g. gas turbine, engine, fuel cells)
Download or read book Western Oil and Refining written by and published by . This book was released on 1916 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Corrosion in Systems for Storage and Transportation of Petroleum Products and Biofuels written by Alec Groysman and published by Springer Science & Business Media. This book was released on 2014-02-17 with total page 306 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book treats corrosion as it occurs and affects processes in real-world situations, and thus points the way to practical solutions. Topics described include the conditions in which petroleum products are corrosive to metals; corrosion mechanisms of petroleum products; which parts of storage tanks containing crude oils and petroleum products undergo corrosion; dependence of corrosion in tanks on type of petroleum products; aggressiveness of petroleum products to polymeric material; how microorganisms take part in corrosion of tanks and pipes containing petroleum products; which corrosion monitoring methods are used in systems for storage and transportation of petroleum products; what corrosion control measures should be chosen; how to choose coatings for inner and outer surfaces of tanks containing petroleum products; and how different additives (oxygenates, aromatic solvents) to petroleum products and biofuels influence metallic and polymeric materials. The book is of interest to corrosion engineers, materials engineers, oil and gas engineers, petroleum engineers, chemists, chemical engineers, mechanical engineers, failure analysts, scientists, and students, designers of tanks, pipelines and other systems for storage and transportation fuels, technicians. The book is of interest to corrosion engineers, materials engineers, oil and gas engineers, petroleum engineers, chemists, chemical engineers, mechanical engineers, failure analysts, scientists, and students, designers of tanks, pipelines and other systems for storage and transportation fuels, technicians. The book is of interest to corrosion engineers, materials engineers, oil and gas engineers, petroleum engineers, chemists, chemical engineers, mechanical engineers, failure analysts, scientists, and students, designers of tanks, pipelines and other systems for storage and transportation fuels, technicians.