Download or read book Petroleum and Natural Gas Industries Design and Operation of Subsea Production Systems Subsea Production Control Systems written by British Standards Institute Staff and published by . This book was released on 2006-05-31 with total page 134 pages. Available in PDF, EPUB and Kindle. Book excerpt: Petroleum technology, Petroleum extraction, Natural gas, Natural gas extraction, Underwater extraction, Wells, Drilling rigs, Offshore construction works, Underwater technology, Control systems, Hydraulic control systems, Design, Approval testing, Interfaces, Quality, Acceptance (approval), Marking
Download or read book GB T GBT Product Catalog Translated English of Chinese Standard GB T GBT written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2018-01-01 with total page 2263 pages. Available in PDF, EPUB and Kindle. Book excerpt: This document provides the comprehensive list of Chinese National Standards - Category: GB/T; GBT.
Download or read book Subsea Engineering Handbook written by Yong Bai and published by Gulf Professional Publishing. This book was released on 2012-01-25 with total page 957 pages. Available in PDF, EPUB and Kindle. Book excerpt: Designing and building structures that will withstand the unique challenges that exist in Subsea operations is no easy task. As deepwater wells are drilled to greater depths, engineers are confronted with a new set problems such as water depth, weather conditions, ocean currents, equipment reliability, and well accessibility, to name just a few. A definitive reference for engineers designing, analyzing and instilling offshore structures, Subsea Structural Engineering Handbook provides an expert guide to the key processes, technologies and equipment that comprise contemporary offshore structures.Written in a clear and easy to understand language, the book is based on the authors 30 years of experience in the design, analysis and instillation of offshore structures. This book answers the above mentioned crucial questions as well as covers the entire spectrum of subjects in the discipline, from route selection and planning to design, construction, installation, materials and corrosion, inspection, welding, repair, risk assessment, and applicable design solutions. It yields a roadmap not only for the subsea engineer but also the project managers, estimators and regulatory personnel hoping to gain an appreciation of the overall issues and directed approaches to subsea engineering design solutions. - Up-to-date technical overview of deepwater riser engineering - Easy to understand Coverage of design, analysis and, stallation - Addresses issues concerning both fixed and floating platforms - Covers techincal equipment such as Subsea Control Systems, Pressure Piping, Connectors and Equipment - Layout as well as Remotely-operated vehicles
Download or read book Chinese Standard GB GB T GBT JB JB T YY HJ NB HG QC SL SN SH JJF JJG CJ TB YD YS NY FZ JG QB SJ SY DL AQ CB GY JC JR JT written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2018-01-01 with total page 7263 pages. Available in PDF, EPUB and Kindle. Book excerpt: This document provides the comprehensive list of Chinese National Standards and Industry Standards (Total 17,000 standards).
Download or read book Subsea Pipelines and Risers written by Yong Bai and published by Elsevier. This book was released on 2005-12-05 with total page 841 pages. Available in PDF, EPUB and Kindle. Book excerpt: • Updated edition of a best-selling title • Author brings 25 years experience to the work • Addresses the key issues of economy and environment Marine pipelines for the transportation of oil and gas have become a safe and reliable way to exploit the valuable resources below the world's seas and oceans. The design of these pipelines is a relatively new technology and continues to evolve in its quest to reduce costs and minimise the effect on the environment. With over 25years experience, Professor Yong Bai has been able to assimilate the essence of the applied mechanics aspects of offshore pipeline system design in a form of value to students and designers alike. It represents an excellent source of up to date practices and knowledge to help equip those who wish to be part of the exciting future of this industry.
Download or read book Subsea Control and Data Acquisition written by L. Adriaansen and published by John Wiley & Sons. This book was released on 2004-11-19 with total page 275 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dealing exclusively with underwater instrumentation, control, and communication technology for subsea oil and gas production, Subsea Control and Data Acquisition has been structured to cover relevant experience and challenges in frontier subsea developments. Aimed at professionals active in subsea production systems, in particular those engaged in the control and monitoring of such installations, and engineers keen to keep abreast of current practice and technologies, this volume covers operational experience of long offset control and monitoring, as well as enhanced oil recovery and discusses relevant topics in subsea and hole monitoring, such as, Reliability Enhanced oil recovery Subsea and down hole monitoring Long offset control Subsea communication/control Reliability of systems plays a dominant role, and the effect of regional legislation is not forgotten; this volume includes contributions from experienced experts from major oil companies to challenge the reader. The accompanying CD can be requested from the UK Editorial team. Send requests to Debbie Cox, [email protected].
Download or read book GB GB T GBT Product Catalog Translated English of Chinese Standard All national standards GB GB T GBT GBZ written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2018-01-01 with total page 2809 pages. Available in PDF, EPUB and Kindle. Book excerpt: This document provides the comprehensive list of Chinese National Standards - Category: GB; GB/T, GBT.
Download or read book Subsea Valves and Actuators for the Oil and Gas Industry written by Karan Sotoodeh and published by Gulf Professional Publishing. This book was released on 2021-05-29 with total page 622 pages. Available in PDF, EPUB and Kindle. Book excerpt: Piping and valve engineers rely on common industrial standards for selecting and maintaining valves, but these standards are not specific to the subsea oil and gas industry. Subsea Valves and Actuators for the Oil and Gas Industry delivers a needed reference to go beyond the standard to specify how to select, test, and maintain the right subsea oil and gas valve for the project. Each chapter focuses on a specific type of valve with a built-in structured table on valve selection, helping guide the engineer to the most efficient valve. Covering subsea-specific protection, the reference also gives information on high pressure protection systems (HIPPS) and discusses corrosion management within the subsea sector, such as Hydrogen Induced Stress Cracking Corrosion (HISC). Additional benefits include understanding the concept of different safety valves in subsea, selecting different valves and actuators located on subsea structures such as Christmas trees, manifolds, and HIPPS modules, with a full detail review including sensors, logic solver, and solenoid which is designed to save cost and improve the reliability in the subsea system. Rounding out with chapters on factory acceptance testing (FAT) and High Integrity Pressure Protection Systems (HIPPS), Subsea Valves and Actuators for the Oil and Gas Industry gives subsea engineers and managers a much-needed tool to better understand today's subsea technology. - Understand practical information about all types of subsea valves and actuators with over 600 visuals and several case studies - Learn and review the applicable standards and specifications from API and ISO in one convenient location - Protect your assets with a high-pressure protection system (HIPPS) and subsea-specific corrosion management including Hydrogen Induced Stress Cracking Corrosion (HISC)
Download or read book List of English translated Chinese standards GB T written by https://www.codeofchina.com and published by https://www.codeofchina.com. This book was released on with total page 3495 pages. Available in PDF, EPUB and Kindle. Book excerpt: HTTPS://WWW.CODEOFCHINA.COM EMAIL:[email protected] "Codeofchina Inc., a part of TransForyou (Beijing) Translation Co., Ltd., is a professional Chinese code translator in China. Now, Codeofchina Inc. is running a professional Chinese code website, www.codeofchina.com. Through this website, Codeofchina Inc. provides English-translated Chinese codes to clients worldwide. About TransForyou TransForyou (Beijing) Translation Co., Ltd., established in 2003, is a reliable language service provider for clients at home and abroad. Since our establishment, TransForyou has been aiming to build up a translation brand with our professional dedicated service. Currently, TransForyou is the director of China Association of Engineering Construction Standardization (CECS); the committeeman of Localization Service Committee / Translators Association of China (TAC) and the member of Boya Translation Culture Salon (BTCS); and the field study center of the University of the University of International Business & Economics (UIBE) and Hebei University (HU). In 2016, TransForyou ranked 27th among Asian Language Service Providers by Common Sense Advisory. "
Download or read book Petroleum and Natural Gas Industries Design and Operation of Subsea Production Systems Subsea Structures and Manifolds written by British Standards Institute Staff and published by . This book was released on 1911-09-30 with total page 74 pages. Available in PDF, EPUB and Kindle. Book excerpt: Petroleum technology, Petroleum extraction, Natural gas, Natural gas extraction, Underwater extraction, Wells, Drilling rigs, Offshore construction works, Underwater, Structures, Manifolds, Valves, Fluid equipment components, Pressure control
Download or read book GB T 2009 GB 2009 Chinese National Standard PDF English Catalog year 2009 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2020-06-06 with total page 245 pages. Available in PDF, EPUB and Kindle. Book excerpt: This document provides the comprehensive list of Chinese National Standards - Category: GB, GB/T Series of year 2009.
Download or read book High Performance Bolting Technology for Offshore Oil and Natural Gas Operations written by National Academies of Sciences, Engineering, and Medicine and published by National Academies Press. This book was released on 2018-07-12 with total page 271 pages. Available in PDF, EPUB and Kindle. Book excerpt: Commercially significant amounts of crude oil and natural gas lie under the continental shelf of the United States. Advances in locating deposits, and improvements in drilling and recovery technology, have made it technically and economically feasible to extract these resources under harsh conditions. But extracting these offshore petroleum resources involves the possibility, however remote, of oil spills, with resulting damage to the ocean and the coastline ecosystems and risks to life and limb of those performing the extraction. The environmental consequences of an oil spill can be more severe underwater than on land because sea currents can quickly disperse the oil over a large area and, thus, cleanup can be problematic. Bolted connections are an integral feature of deep-water well operations. High-Performance Bolting Technology for Offshore Oil and Natural Gas Operations summarizes strategies for improving the reliability of fasteners used in offshore oil exploration equipment, as well as best practices from other industrial sectors. It focuses on critical boltingâ€"bolts, studs, nuts, and fasteners used on critical connections.
Download or read book Catalogue written by International Organization for Standardization and published by . This book was released on 2008 with total page 988 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Standard Handbook of Petroleum and Natural Gas Engineering written by William Lyons and published by Gulf Professional Publishing. This book was released on 2015-12-08 with total page 1823 pages. Available in PDF, EPUB and Kindle. Book excerpt: Standard Handbook of Petroleum and Natural Gas Engineering, Third Edition, provides you with the best, state-of-the-art coverage for every aspect of petroleum and natural gas engineering. With thousands of illustrations and 1,600 information-packed pages, this handbook is a handy and valuable reference. Written by dozens of leading industry experts and academics, the book provides the best, most comprehensive source of petroleum engineering information available. Now in an easy-to-use single volume format, this classic is one of the true "must haves" in any petroleum or natural gas engineer's library. A classic for over 65 years, this book is the most comprehensive source for the newest developments, advances, and procedures in the oil and gas industry. New to this edition are materials covering everything from drilling and production to the economics of the oil patch. Updated sections include: underbalanced drilling; integrated reservoir management; and environmental health and safety. The sections on natural gas have been updated with new sections on natural gas liquefaction processing, natural gas distribution, and transport. Additionally there are updated and new sections on offshore equipment and operations, subsea connection systems, production control systems, and subsea control systems. Standard Handbook of Petroleum and Natural Gas Engineering, Third Edition, is a one-stop training tool for any new petroleum engineer or veteran looking for a daily practical reference. - Presents new and updated sections in drilling and production - Covers all calculations, tables, and equations for every day petroleum engineers - Features new sections on today's unconventional resources and reservoirs
Download or read book ISO Catalogue written by International Organization for Standardization and published by . This book was released on 2006 with total page 896 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book GB T 2018 GB 2018 Chinese National Standard PDF English Catalog year 2018 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2020-06-06 with total page 434 pages. Available in PDF, EPUB and Kindle. Book excerpt: This document provides the comprehensive list of Chinese National Standards - Category: GB, GB/T Series of year 2018.
Download or read book Prevention of Actuator Emissions in the Oil and Gas Industry written by Karan Sotoodeh and published by Gulf Professional Publishing. This book was released on 2021-06-02 with total page 164 pages. Available in PDF, EPUB and Kindle. Book excerpt: Prevention of Actuator Emissions in the Oil and Gas Industry delivers a critical reference for oil and gas engineers and managers to get up-to-speed on all the factors in actuator fugitive emissions. Packed with a selection process, the benefits of switching to an electric system, and the technology around open and closed loop hydraulic systems helps today's engineer understand all their options. Rounding with a detailed explanation around High Integrity Pressure Protection Systems (HIPPS), this book gives provides the knowledge necessary to lower emissions on today's equipment. - Gives readers all they need to understand all the sources and key factors contributing to fugitive emissions and leakage from oil and gas actuators - Teaches how to select environmentally friendly actuators, particularly all electric systems - Introduces the High Integrity Pressure Protection System (HIPPS) and the ways it reduces flaring
