Download or read book Perturbation Techniques for Flexible Manipulators written by Anthony R. Fraser and published by Springer. This book was released on 2011-09-26 with total page 275 pages. Available in PDF, EPUB and Kindle. Book excerpt: A manipulator, or 'robot', consists of a series of bodies (links) connected by joints to form a spatial mechanism. Usually the links are connected serially to form an open chain. The joints are either revolute (rotary) or prismatic (telescopic), various combinations of the two giving a wide va riety of possible configurations. Motive power is provided by pneumatic, hydraulic or electrical actuation of the joints. The robot arm is distinguished from other active spatial mechanisms by its reprogrammability. Therefore, the controller is integral to any de scription of the arm. In contrast with many other controlled processes (e. g. batch reactors), it is possible to model the dynamics of a ma nipulator very accurately. Unfortunately, for practical arm designs, the resulting models are complex and a considerable amount of research ef fort has gone into improving their numerical efficiency with a view to real time solution [32,41,51,61,77,87,91]. In recent years, improvements in electric motor technology coupled with new designs, such as direct-drive arms, have led to a rapid increase in the speed and load-carrying capabilities of manipulators. However, this has meant that the flexibility of the nominally rigid links has become increasingly significant. Present generation manipulators are limited to a load-carrying capacity of typically 5-10% of their own weight by the requirement of rigidity. For example, the Cincinatti-Milicron T3R3 robot weighs more than 1800 kg but has a maximum payload capacity of 23 kg.
Download or read book Perturbation Techniques for Flexible Manipulators written by Anthony R. Fraser and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 284 pages. Available in PDF, EPUB and Kindle. Book excerpt: A manipulator, or 'robot', consists of a series of bodies (links) connected by joints to form a spatial mechanism. Usually the links are connected serially to form an open chain. The joints are either revolute (rotary) or prismatic (telescopic), various combinations of the two giving a wide va riety of possible configurations. Motive power is provided by pneumatic, hydraulic or electrical actuation of the joints. The robot arm is distinguished from other active spatial mechanisms by its reprogrammability. Therefore, the controller is integral to any de scription of the arm. In contrast with many other controlled processes (e. g. batch reactors), it is possible to model the dynamics of a ma nipulator very accurately. Unfortunately, for practical arm designs, the resulting models are complex and a considerable amount of research ef fort has gone into improving their numerical efficiency with a view to real time solution [32,41,51,61,77,87,91]. In recent years, improvements in electric motor technology coupled with new designs, such as direct-drive arms, have led to a rapid increase in the speed and load-carrying capabilities of manipulators. However, this has meant that the flexibility of the nominally rigid links has become increasingly significant. Present generation manipulators are limited to a load-carrying capacity of typically 5-10% of their own weight by the requirement of rigidity. For example, the Cincinatti-Milicron T3R3 robot weighs more than 1800 kg but has a maximum payload capacity of 23 kg.
Download or read book Perturbation Techniques in the Dynamics and Control of Flexible Manipulators written by A. R. Fraser and published by . This book was released on 1988 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Perturbation Techniques in the Dynamics and Control of Flexible Manipulators written by A. R. Fraser and published by . This book was released on 1988 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Flexible Robot Manipulators written by M. Osman Tokhi and published by IET. This book was released on 2008-05-20 with total page 579 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses the latest developmens in modelling, simulation and control of flexible robot manipulators. Coverage includes an overall review of previously developed methodologies, a range of modelling approaches including classical techniques, parametric and neuromodelling approaches and numerical modelling/simulation techniques.
Download or read book Robust Control Algorithms for Flexible Manipulators written by Kshetrimayum Lochan and published by CRC Press. This book was released on 2024-10-13 with total page 236 pages. Available in PDF, EPUB and Kindle. Book excerpt: Various modelling and control of two-link flexible manipulators are presented in this book. The lumped parameter modelling method and the assumed modes method modelling are comprehensively reviewed. The book also reviews the trajectory tracking problem and tip trajectory tracking problem along with the suppression of tip deflection of the links. An exponential time varying signal and a chaotic signal are considered as the desired trajectories. The identical/ non-identical slave manipulator is synchronised with the controlled master manipulator so that the slave manipulator indirectly follows the desired manipulator.
Download or read book Robust Control Algorithms for Two link Flexible Manipulators written by Kshetrimayum Lochan and published by CRC Press. This book was released on 2024-10-13 with total page 262 pages. Available in PDF, EPUB and Kindle. Book excerpt: Various modelling and control of two-link flexible manipulators are presented in this book. The lumped parameter modelling method and the assumed modes method modelling are comprehensively reviewed. The book also reviews the trajectory tracking problem and tip trajectory tracking problem along with the suppression of tip deflection of the links. An exponential time varying signal and a chaotic signal are considered as the desired trajectories. The identical/ non-identical slave manipulator is synchronised with the controlled master manipulator so that the slave manipulator indirectly follows the desired manipulator.
Download or read book Perturbation Techniques in the Dynamics and Control of Flexible Manipulation written by Anthony R. Fraser and published by . This book was released on 1988 with total page 492 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Flexible Manipulators written by Yanqing Gao and published by Academic Press. This book was released on 2012-04-16 with total page 269 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Intelligent Systems Series comprises titles that present state-of-the-art knowledge and the latest advances in intelligent systems. Its scope includes theoretical studies, design methods, and real-world implementations and applications. Flexible manipulators play a critical role in applications in a diverse range of fields, such as construction automation, environmental applications, and space engineering. Due to the complexity of the link deformation and dynamics, the research effort on accurate modeling and high performance control of flexible manipulators has increased dramatically in recent years. This book presents analysis, data and insights that will of particular use for researchers and engineers working on the optimization and control of robotic manipulators and automation systems. Government and industry groups have specifically stressed the importance of innovation in robotics, manufacturing automation, and control systems for maintaining innovation and high-value-added manufacturing Discusses the latest research on the quantitative effects of size, shape, mass distribution, tip load, on the dynamics and operational performance of flexible manipulators Presents unique analyses critical to the effective modeling and optimization of manipulators: hard to find data unavailable elsewhere
Download or read book Current Trends in Nonlinear Systems and Control written by Laura Menini and published by Springer Science & Business Media. This book was released on 2006-09-13 with total page 557 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume is an outgrowth of the workshop "Applications of Advanced Control Theory to Robotics and Automation, "organized in honor of the 70th birthdays of Petar V. Kokotovic and Salvatore (Turi) Nicosia. Both Petar and Turi have carried out distinguished work in the control community and have long been recognized as mentors, as well as experts and pioneers in the field of automatic control, covering many topics in control theory and several different applications. The variety of their research is reflected in this book, which includes contributions ranging from mathematics to laboratory experiments. The scope of the work is very broad, and although each chapter is self-contained, the book has been organized into thematically related chapters, which in some cases, suggest to the reader a convenient reading sequence. The great variety of topics covered and the almost tutorial writing style used by many of the authors will make this book suitable for both experts in the control field and young researchers who seek a more intuitive understanding of these relevant topics in the field.
Download or read book Robots Manipulators written by John X. Liu and published by Nova Publishers. This book was released on 2005 with total page 254 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book deals with control and learning in robotic systems.
Download or read book Distributed Parameter Modeling and Boundary Control of Flexible Manipulators written by Jinkun Liu and published by Springer. This book was released on 2018-04-16 with total page 154 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book investigates fundamental issues in flexible manipulator systems, including distributed parameter modeling and boundary controller design. It presents theoretical explorations of several fundamental problems concerning the dynamics and control of these systems. By integrating fresh concepts and results to form a systematic approach to control, it also provides a basic theoretical framework. In turn, the book offers a comprehensive treatment of flexible manipulator systems, addressing topics ranging from related distributed parameter modeling and advanced boundary controller design for these systems with input constraint, to active control with output constraint. In brief, the book addresses dynamical analysis and control design for flexible manipulator systems. Though primarily intended for researchers and engineers in the control system and mechanical engineering community, it can also serve as supplemental reading on the modeling and control of flexible manipulator systems at the postgraduate level.
Download or read book Robust Adaptive Dynamic Programming written by Yu Jiang and published by John Wiley & Sons. This book was released on 2017-04-13 with total page 220 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive look at state-of-the-art ADP theory and real-world applications This book fills a gap in the literature by providing a theoretical framework for integrating techniques from adaptive dynamic programming (ADP) and modern nonlinear control to address data-driven optimal control design challenges arising from both parametric and dynamic uncertainties. Traditional model-based approaches leave much to be desired when addressing the challenges posed by the ever-increasing complexity of real-world engineering systems. An alternative which has received much interest in recent years are biologically-inspired approaches, primarily RADP. Despite their growing popularity worldwide, until now books on ADP have focused nearly exclusively on analysis and design, with scant consideration given to how it can be applied to address robustness issues, a new challenge arising from dynamic uncertainties encountered in common engineering problems. Robust Adaptive Dynamic Programming zeros in on the practical concerns of engineers. The authors develop RADP theory from linear systems to partially-linear, large-scale, and completely nonlinear systems. They provide in-depth coverage of state-of-the-art applications in power systems, supplemented with numerous real-world examples implemented in MATLAB. They also explore fascinating reverse engineering topics, such how ADP theory can be applied to the study of the human brain and cognition. In addition, the book: Covers the latest developments in RADP theory and applications for solving a range of systems’ complexity problems Explores multiple real-world implementations in power systems with illustrative examples backed up by reusable MATLAB code and Simulink block sets Provides an overview of nonlinear control, machine learning, and dynamic control Features discussions of novel applications for RADP theory, including an entire chapter on how it can be used as a computational mechanism of human movement control Robust Adaptive Dynamic Programming is both a valuable working resource and an intriguing exploration of contemporary ADP theory and applications for practicing engineers and advanced students in systems theory, control engineering, computer science, and applied mathematics.
Download or read book Theory of Robot Control written by Carlos Canudas de Wit and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 392 pages. Available in PDF, EPUB and Kindle. Book excerpt: A study of the latest research results in the theory of robot control, structured so as to echo the gradual development of robot control over the last fifteen years. In three major parts, the editors deal with the modelling and control of rigid and flexible robot manipulators and mobile robots. Most of the results on rigid robot manipulators in part I are now well established, while for flexible manipulators in part II, some problems still remain unresolved. Part III deals with the control of mobile robots, a challenging area for future research. The whole is rounded off with an appendix reviewing basic definitions and the mathematical background for control theory. The particular combination of topics makes this an invaluable source of information for both graduate students and researchers.
Download or read book Nonlinear Dynamical Systems with Self Excited and Hidden Attractors written by Viet-Thanh Pham and published by Springer. This book was released on 2018-02-26 with total page 497 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book highlights the latest findings on nonlinear dynamical systems including two types of attractors: self-excited and hidden attractors. Further, it presents both theoretical and practical approaches to investigating nonlinear dynamical systems with self-excited and hidden attractors. The book includes 20 chapters contributed by respected experts, which focus on various applications such as biological systems, memristor-based systems, fractional-order systems, finance systems, business cycles, oscillators, coupled systems, hyperchaotic systems, flexible robot manipulators, electronic circuits, and control models. Special attention is given to modeling, design, circuit realization, and practical applications to address recent research problems in nonlinear dynamical systems. The book provides a valuable reference guide to nonlinear dynamical systems for engineers, researchers, and graduate students, especially those whose work involves mechanics, electrical engineering, and control systems.
Download or read book Recent Trends in Wave Mechanics and Vibrations written by S. Chakraverty and published by Springer Nature. This book was released on 2019-11-12 with total page 468 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book consists of select proceedings of the National Conference on Wave Mechanics and Vibrations (WMVC 2018). It covers recent developments and cutting-edge methods in wave mechanics and vibrations applied to a wide range of engineering problems. The book presents analytical and computational studies in structural mechanics, seismology and earthquake engineering, mechanical engineering, aeronautics, robotics and nuclear engineering among others. This book can be useful for students, researchers, and professionals interested in the wide-ranging applications of wave mechanics and vibrations.
Download or read book RAMSETE written by Salvatore Nicosia and published by Springer. This book was released on 2003-07-01 with total page 292 pages. Available in PDF, EPUB and Kindle. Book excerpt: Robotics applications, initially developed for industrial and manufacturing contexts, are now strongly present in several elds. Besides well-known space and high-technology applications, robotics for every day life and medical s- vices is becoming more and more popular. As an example, robotic manipu- tors are particularly useful in surgery and radiation treatments, they could be employed for civil demining, for helping disabled people, and ultimately for domestic tasks, entertainment and education. Such a kind of robotic app- cations require the integration of many di erent skills. Autonomous vehicles and mobile robots in general must be integrated with articulated manipu- tors. Many robotic technologies (sensors, actuators and computing systems) must be properly used with speci c technologies (localisation, planning and control technologies). The task of designing robots for these applications is a hard challenge: a speci c competence in each area is demanded, in the e ort of a truly integrated multidisciplinary design.