Download or read book Height Safety written by Ahamed Hussain and published by Notion Press. This book was released on 2021-07-08 with total page 275 pages. Available in PDF, EPUB and Kindle. Book excerpt: Height safety is not just about falls from height. Though it is a major factor, a lot of other hazards and challenges to human safety can also be encountered while working at height including: - Falls from height - Trips and slips - Fragile surfaces - Falling objects - Weather (heat, humidity, cold, wind, rain and snow) - Electrocution - Water hazard in land, marine and offshore work at height, etc. This book providing all necessary information about height safety for work at height is intended for: • Safety managers and engineers; • Civil & construction engineers; • Design architects; Consultants; Contractors; • Facility managers; • Industrial plant managers; • Windmill managers; • Marine and offshore facility managers.

Download or read book Fire and Rescue Service Manual written by Great Britain. Fire Service Inspectorate and published by The Stationery Office. This book was released on 2006-11-09 with total page 124 pages. Available in PDF, EPUB and Kindle. Book excerpt: This document gives guidance on legislation relevant to work at height and identifies good practice, which supports safe systems of work. The guidance is for use by fire and rescue services for planning operational service delivery and training

Download or read book Phosphate Coatings Suitable for Personal Protective Equipment written by Diana Petronela BURDUHOS-NERGIS and published by Materials Research Forum LLC. This book was released on 2021-02-05 with total page 188 pages. Available in PDF, EPUB and Kindle. Book excerpt: Phosphate coatings can improve the corrosion resistance of carbon steel equipment such as carabiners. The specific porosity of the phosphate layer allows the deposition of an elastomer-based paint for absorbing mechanical shocks. The book is relevant for fundamental and applied research in the field of protective phosphate layers and their industrial applications. It also describes how to design and develop phosphating solutions that differ in the type and concentration of metal ions dissolved in phosphoric acid. Keywords: Safety Rings, Carabiners, Phosphate Coatings, Aluminum Alloys, Carbon Steels, Stainless Steels, Structural Characterization, Mechanical Characterization, Corrosion Resistance, Friction Coefficient, Temperature Shock, Mechanical Impact, Design of Carabiners, Coating Technology.

Download or read book Useful Facts in Relation to the Personal Protective Equipment PPE written by European Commission. Enterprise DG. and published by . This book was released on 2000 with total page 152 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recoge: 1. Questions/Answers - 2. Categorisation guide - 3. Standarisation - 4. "Recommendation for use"established by the co-ordination of notified bodies - 5. Notified bodies - 6. Useful addresses - 7. National implementation measures.

Download or read book Head Eye and Face Personal Protective Equipment written by Katarzyna Majchrzycka and published by CRC Press. This book was released on 2020-08-04 with total page 128 pages. Available in PDF, EPUB and Kindle. Book excerpt: Head, Eye, and Face Personal Protective Equipment: New Trends, Practice, and Applications presents protective equipment in the context of the latest design trends, materials, and technologies. It informs the reader using basic safety principles to avoid issues with commonly used personal protective equipment (PPE), such as helmets and eye and face protectors. It provides the latest design trends in eye and face protectors to avoid optical hazards and for use in variable lighting conditions. Features: • Fills the gap on current solutions of PPE and occupational safety • Educates in reducing risk connected with using industrial safety gear • Helpful to optometrists in the selection of eye protection for people with visual impairments • Instructs the reader on choosing smart materials and safety products • Provides best practices for checking the technical condition of the equipment This book is essential for the safety professional and medical experts in the field. It provides an interdisciplinary approach to personal protective equipment using new technologies in the field. "The monograph Head, Eye, and Face Personal Protective Equipment - New Trends, Practice and Applications is a complementary and thoughtful but selected compilation of the most relevant information concerning protective helmets as well as eye and face protection. The compilation of these two protection types is the result of the common use of both protective helmets and eye and face protectors. This requires their full compatibility, both in terms of ensuring optimum safety and comfort of use. The authors have chosen the material according to the needs of people directly responsible for safety at work and users of those protectors. The main aim of the work is to popularise knowledge in the field of construction, research methods, selection and use of protective helmets and eye and face protectors. In terms of use, the authors emphasise the necessity of independent control, i.e. checking the technical condition of the equipment used by the end users. The presented monograph includes the current state of knowledge in this scope, extended by the results and summaries of the authors' own research. All requirements and research methods are given based on European (EN), international (ISO) standards and standards operating in different geographical areas. The monograph also encompasses new trends in the design of protective helmets and eye and face protectors. All this allows me to emphasize the uniqueness of this monograph in relation to previous publications in this field, both in terms of the scope and selection of information concerning protective helmets and eye and face protectors." — Ryszard Korycki, Łódź University of Technology

Download or read book Inspecting Personal Fall Protection Equipment written by Dr D F Merchant and published by . This book was released on 2020-02-11 with total page 156 pages. Available in PDF, EPUB and Kindle. Book excerpt: A fully updated 2nd Edition of the unique and essential reference to inspecting all forms of industrial and sporting personal fall protection equipment, from accessory cord to webbing slings, including guidance on the legal requirements for UK workplaces post-Brexit.

Download or read book Personal Protective Equipment PPE written by and published by . This book was released on 1997 with total page 124 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recoge: 1. Questions-Answers -- 2. Guide for the categorisation of personal protective equipment (PPE) -- 3. Standardisation -- 4. "Recommendation for use" Established by the coordination of notified bodies -- 5. Notified bodies -- 6. Useful addresses.

Download or read book Falls from Height written by Loui McCurley and published by John Wiley & Sons. This book was released on 2013-05-17 with total page 374 pages. Available in PDF, EPUB and Kindle. Book excerpt: Enables workplace responders to prepare for and respond to falls from height How do you rescue someone suspended in midair or trapped above ground? Author Loui McCurley, an expert in technical rope rescue with more than twenty-five years of experience, has the answers. Following her tested and proven advice, readers will learn how to prepare for and safely rescue "at-height" workers and others from "falls from height." The book fully bridges the gap between planning and execution, steering readers toward simple workplace-specific solutions. Moreover, it explains how to develop and implement a comprehensive protection program, enabling all organizations and their employees to fully prepare themselves to respond to a fall from height. Falls from Height is divided into four parts: Part I: Regulatory Considerations, Rescue Plans, and Developing a Rescue Capability underscores the need for a rescue program, explaining how to fully leverage available resources to optimize the program. Part II: Equipment, Systems, and Skills details the skills that all rescuers should have and the equipment they need to perform a rescue at height. Part III: Putting It All Together discusses principles of rigging, single-rescuer methods, and group-rescuer methods. Part IV: Successful Workplace Planning examines the unique challenges of different workplace environments and then offers a step-by-step guide for implementing the book's recommendations. Based on the premise that a fallen worker must be rescued quickly and efficiently, without putting others in harm's way, Falls from Height is a must for all workplace responders, enabling them to prepare for and respond to fall victims like experienced rescuers.

Download or read book Textiles for Protection written by Richard A. Scott and published by Elsevier. This book was released on 2005-10-30 with total page 785 pages. Available in PDF, EPUB and Kindle. Book excerpt: In today's climate there is an increasing requirement for protective textiles, whether for personal protection, protection against the elements, chemical, nuclear or ballistic attack. This comprehensive book brings together the leading protective textiles experts from around the world. It covers a wide variety of themes from materials and design, through protection against specific hazards, to specific applications. This is the first book of its kind to give a complete coverage of textiles for protection. - Covers a wide variety of themes from materials and design, through protection against specific hazards, to specific applications - The first book of its kind to give a complete coverage of textiles for protection - Written by leading protective textiles experts from around the world

Download or read book Handbook of Occupational Safety and Health written by Danuta Koradecka and published by CRC Press. This book was released on 2010-05-04 with total page 664 pages. Available in PDF, EPUB and Kindle. Book excerpt: Using an interdisciplinary approach, this book presents a wide range of methods and specific criteria for assessing hazard and exposure in the workplace environment, offering ways to reduce these hazards. This text provides coverage of basic risk factors, law-based protection of labor, shaping conditions of occupational safety and ergonomics, psychophysical capabilities of humans in the working environment, and more.

Download or read book Principles of Health and Safety at Work written by Allan St John Holt and published by Routledge. This book was released on 2015-06-22 with total page 357 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is a reprint of ISBN 978-0-901-35743-4 Widely acknowledged as the one stop summary of health and safety fundamentals, Principles covers law, safety technology, occupational health and hygiene and safety management techniques. Originally written by the late international health and safety expert Allan St John Holt, this new edition has been comprehensively updated by Allan's colleague Jim Allen. The book is designed as a concise, accessible introduction to health and safety basics and includes revision notes and a wide range of references. It is a first class resource for NEBOSH Certificate students.

Download or read book Safety of Repair Maintenance Minor Alteration and Addition RMAA Works written by Albert P. C. Chan and published by Routledge. This book was released on 2016-03-10 with total page 169 pages. Available in PDF, EPUB and Kindle. Book excerpt: Safety of RMAA works is an almost uncharted topic of rising importance internationally. Small construction contractors are particularly dependant on RMAA work, especially during times of recession, and they undertake more risks on these jobs than large companies do. This book is based on unique international research and consultancy projects which detail, investigate, and suggest solutions to the specific challenges of safety in RMAA works, based on case studies. Starting with an overview of safety in the wider construction industries of developed countries, the first half of this book also provides a comprehensive summary of relevant rules, regulations, and the resulting safety performances. The systems in the UK, US and Hong Kong are described and contrasted, giving the reader an understanding of how different regulatory approaches have yielded a variety of results. From this solid introduction, specific problems observed in RMAA work are examined through case studies, with reference to the underlying cultural and demographic factors, and a variety of practical engineering and management solutions are explored. This important and practical international work is essential reading for postgraduate students of health and safety in construction, construction project management, or construction in developing countries, as well as policy-makers and construction project managers.

Download or read book Introduction to Health and Safety in Construction written by Phil Hughes and published by Routledge. This book was released on 2015-09-16 with total page 1563 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introduction to Health and Safety in Construction has been specially written for the thousands of students who complete the NEBOSH National Certificate in Construction Health and Safety each year. Fully revised in alignment with the April 2015 syllabus, the fifth edition provides students with all they need to tackle the course with confidence. The book covers all the essential elements of health and safety management in construction including the legal framework, risk assessment and control standards. Highly illustrated, with information provided in a clear, easily accessible format, it also provides checklists and record sheets to supplement learning. Aligned to the NEBOSH National Certificate in Construction Health and Safety Practice questions and answers to test knowledge and increase understanding Complete with a companion website containing extra resources for tutors and students at www.routledge.com/cw/hughes The only textbook endorsed for the NEBOSH National Certificate in Construction Health and Safety, the Introduction to Health and Safety in Construction is also suitable for construction courses in the UK and overseas and serves as a comprehensive reference for managers and professionals within the construction industry.

Download or read book Safety Engineering in the Oil and Gas Industry written by Karan Sotoodeh and published by CRC Press. This book was released on 2023-08-10 with total page 461 pages. Available in PDF, EPUB and Kindle. Book excerpt: When accidents occur in the oil and gas industry, the impacts can be profound. Serious injury or death to workers, environmental disasters and colossal costs for insurance or clean ups make the industry a hazardous one to operate in. Disasters become major news events such as the Prestige oil spill, Piper Alpha, Exxon Valdez oil spill and Deepwater Horizon. A move towards improving the health and safety of the industry is underway. This book emphasizes controlling, managing, and mitigating the risk of hazards in the oil and gas industry, increasing safety, and protecting the environment by identifying the hazards in the oil and gas industry through safety engineering techniques and management methods. Safety Engineering in the Oil and Gas Industry discusses how to improve safety and reliability in the oil and gas industry so that hazards can be reduced to the lowest level feasible. It covers the techniques needed to operate safely in an oil and/or gas industry setting, the standards that should be adhered to, the impacts of PPE, fire and explosions, equipment and infrastructure failures and storage and reliability engineering, amongst many other topics. This book is written in an easy-to-read and appealing style and multiple-choice questions are included to help with learning and understanding the concepts included. Underpinned by real life case studies and examples, this book aims to allow readers to consider how they can reduce the costs associated with bad safety practices to their business through maintained and consistent health, safety and environmental (HSE) standards. This book is a must-read for any student or professional studying or working in the oil and gas industries. It also has additional appeal to those with an academic or professional interest in occupational health and safety, civil engineering, offshore engineering and maritime engineering.

Download or read book Nuclear Decommissioning Waste Management and Environmental Site Remediation written by Colin Bayliss and published by Elsevier. This book was released on 2003-10-10 with total page 351 pages. Available in PDF, EPUB and Kindle. Book excerpt: Decommissioning nuclear facilities is a relatively new field, which has developed rapidly in the last ten years. It involves materials that may be highly radioactive and therefore require sophisticated methods of containment and remote handling. The wastes arising from decommissioning are hazardous and have to be stored or disposed of safely in order to protect the environment and future generations. Nuclear decommissioning work must be carried out to the highest possible standards to protect workers, the general public and the environment. This book describes the techniques used for dismantling redundant nuclear facilities, the safe storage of radioactive wastes and the restoration of nuclear licensed sites.* Describes the techniques used for dismantling nuclear facilities, safe storage of radioactive wastes, and the restoration of nuclear licensed facilities. * Provides the reader with decommissioning experience accumulated over 15 years by UKAEA. * Contains valuable information to personnel new to decommissioning and waste management.

Download or read book Health and Safety in Construction Revision Guide written by Ed Ferrett and published by Routledge. This book was released on 2015-09-16 with total page 271 pages. Available in PDF, EPUB and Kindle. Book excerpt: This companion to the bestselling Introduction to Health and Safety in Construction is an essential revision aid for students preparing for their written assessments on the NEBOSH National Certificate in Construction Health and Safety. Fully updated to the April 2015 specification, the revision guide provides complete coverage of the syllabus in bite-sized chunks, helping readers to learn and memorise the most important topics. Throughout the book, the guide links back to the Introduction to Health and Safety in Construction textbook, helping students to consolidate their learning. · Small and portable making it ideal for use anywhere: at home, in the classroom or on the move · Suggests useful tips on study and examination technique · Includes practice questions and answers based on NEBOSH exam questions · Everything you need for productive revision in one handy reference The Health and Safety in Construction Revision Guide, written by the renowned health and safety author and former NEBOSH Vice Chairman Ed Ferrett, will be an invaluable tool for students as they prepare for their NEBOSH exam and for their subsequent health and safety work.

Download or read book Handbook of Human Factors and Ergonomics written by Gavriel Salvendy and published by John Wiley & Sons. This book was released on 2012-05-24 with total page 1754 pages. Available in PDF, EPUB and Kindle. Book excerpt: The fourth edition of the Handbook of Human Factors and Ergonomics has been completely revised and updated. This includes all existing third edition chapters plus new chapters written to cover new areas. These include the following subjects: Managing low-back disorder risk in the workplace Online interactivity Neuroergonomics Office ergonomics Social networking HF&E in motor vehicle transportation User requirements Human factors and ergonomics in aviation Human factors in ambient intelligent environments As with the earlier editions, the main purpose of this handbook is to serve the needs of the human factors and ergonomics researchers, practitioners, and graduate students. Each chapter has a strong theory and scientific base, but is heavily focused on real world applications. As such, a significant number of case studies, examples, figures, and tables are included to aid in the understanding and application of the material covered.