Download or read book Performing a Chemical Durability Test on Radioactive High level Nuclear Waste Glass written by and published by . This book was released on 1990 with total page 31 pages. Available in PDF, EPUB and Kindle. Book excerpt: Savannah River Site (SRS), currently is storing (approximately)30 million gallons of highly radioactive nuclear wastes. The Defense Waste Processing Facility (DWPF) nearing completion at SRS will incorporate the radionuclides in these wastes into solid borosilicate glass for final disposal in a geologic repository. Because of the variability of the wastes in the tanks, borosilicate glasses of different compositions will be produced by the DWPF during the 20--25 years required to solidify all the wastes at SRS. A chemical durability test, the Product Consistency Test (PCT), has been developed at SRS to measure the consistency of the durability of these glasses. This paper describes the remote and hands-on procedures for performing the PCT on these radioactive glasses. Results will be presented that indicate the good precision of the PCT and indicate some of the chemistry involved in leaching radioactive elements from the glass. 9 refs., 1 fig., 4 tabs.
Download or read book Glass as a Waste Form and Vitrification Technology written by National Research Council and published by National Academies Press. This book was released on 1997-03-02 with total page 172 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Development of an ASTM Standard Glass Durability Test the Product Consistency Test PCT for High Level Radioactive Waste Glass written by and published by . This book was released on 1994 with total page 8 pages. Available in PDF, EPUB and Kindle. Book excerpt: The nation's first, and the world's largest, facility to immobilize high-level nuclear waste in durable borosilicate glass has started operation at the Savannah River Site (SRS) in Aiken, South Carolina. The product specifications on the glass wasteform produced in the Defense Waste Processing Facility (DWPF) required extensive characterization of the glass product before actual production began and for continued characterization during production. To aid in this characterization, a glass durability (leach) test was needed that was easily reproducible, could be performed remotely on highly radioactive samples, and could yield results rapidly. Several standard leach tests were examined with a variety of test configurations. Using existing tests as a starting point, the DWPF Product Consistency Test (PCT was developed in which crushed glass samples are exposed to 90 " 2°C deionized water for seven days. Based on extensive testing, including a seven-laboratory round robin and confirmatory testing with radioactive samples, the PCT is very reproducible, yields reliable results rapidly, and can be performed in shielded cell facilities with radioactive samples.
Download or read book Chemical Durability of Zinc Borosilicate Nuclear Waste Glass written by and published by . This book was released on 1977 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Chemical durability is of primary concern when evaluating the safety of waste glass. For this reason, testing the leachability of waste glasses is a fundamental part of their development and characterization. The leachability is also very much a function of glass composition as previously discussed. This discussion is limited to a representative waste glass composition, a high-zinc borosilicate formulation which has been studied in detail by Battelle Pacific Northwest Laboratories. (GHT).
Download or read book Nuclear Waste Glass Product Consistence Test PCT Version 3 0 written by C. M. Jantzen and published by . This book was released on 1990 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Nuclear Waste Glass Product Consistency Test PCT Version 3 0 written by and published by . This book was released on 1990 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Liquid high-level nuclear waste will be immobilized at the Savannah River Site (SRS) by vitrification in borosilicate glass. The glass will be produced in the Defense Waste Processing Facility (DWPF), poured into stainless steel canisters, and eventually disposed of in a geologic repository. In order to comply with the Waste Acceptance Preliminary Specifications (WAPS), the durability of the glass needs to be measured during production to assure its long term stability and radionuclide release properties. A durability test, designated the Product Consistency Test (PCT), was developed for DWPF glass in order to meet the WAPS requirements. The response of the PCT procedure was based on extensive testing with glasses of widely different compositions. The PCT was determined to be very reproducible, to yield reliable results rapidly, and to be easily performed in shielded cell facilities with radioactive samples.
Download or read book Nuclear Waste Glass Product Consistency Test PCT Version 5 0 written by and published by . This book was released on 1992 with total page 50 pages. Available in PDF, EPUB and Kindle. Book excerpt: Liquid high-level nuclear waste will be immobilized at the Savannah River Site (SRS) by vitrification in borosilicate glass. The glass will be produced in the Defense Waste Processing Facility (DWPF), poured into stainless steel canisters, and eventually disposed of in a geologic repository. In order to comply with the Waste Acceptance Preliminary Specifications (WAPS), the durability of the glass needs to be measured during production to assure its long term stability and radionuclide release properties. A durability test, designated the Produce Consistency Test (PCT), was developed for DWPF glass in order to meet the WAPS requirements. The response of the PCT procedure was based on extensive testing with glasses of widely different compositions. The PCT was determined to be very reproducible, to yield reliable results rapidly, and to be easily performed in shielded cell facilities with radioactive samples. Version 5.0 of the PCT procedure is attached.
Download or read book Nuclear Waste Glasses Suitability Surface Studies and Stability written by and published by . This book was released on 1999 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Every major country involved with long-term management of high-level radioactive waste (HLW) has either selected or is considering glass as the matrix of choice for immobilizing and ultimately, disposing of the potentially hazardous, high-level radioactive material. There are many reasons why glass is preferred. Among the most important considerations are the ability of glass structures to accommodate and immobilize the many different types of radionuclides present in HLW, and to produce a product that not only has excellent technical properties, but also possesses good processing features. Good processability allows the glass to be fabricated with relative ease even under difficult remote-handling conditions necessary for vitrification of highly radioactive material. The single most important property of the waste glass produced is its ability to retain hazardous species within the glass structure and this is reflected by its excellent chemical durability and corrosion resistance to a wide range of environmental conditions.
Download or read book Chemical Durability of Glasses Containing Radioactive Fission Product Waste written by and published by . This book was released on 1974 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Measurements made to determine the chemical durability of glasses for disposal of radioactive waste are discussed. The term glass covers materials varying from true glass with only minute quantities of crystallites, such as insoluble RuO$sub 2$, to quasi glass-ceramics which are mostly crystalline. Chemical durability requirements and Soxhlet extractor leach tests are discussed. (LK).
Download or read book Strategy and Methodology for Radioactive Waste Characterization written by International Atomic Energy Agency and published by IAEA. This book was released on 2007 with total page 188 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over the past decade significant progress has been achieved in the development of waste characterization and control procedures and equipment as a direct response to ever-increasing requirements for quality and reliability of information on waste characteristics. Failure in control procedures at any step can have important, adverse consequences and may result in producing waste packages which are not compliant with the waste acceptance criteria for disposal, thereby adversely impacting the repository. The information and guidance included in this publication corresponds to recent achievements and reflects the optimum approaches, thereby reducing the potential for error and enhancing the quality of the end product. -- Publisher's description.
Download or read book Factors Influencing Chemical Durability of Nuclear Waste Glasses written by and published by . This book was released on 1993 with total page 8 pages. Available in PDF, EPUB and Kindle. Book excerpt: A short summary is given of our studies on the major factors that affect the chemical durability of nuclear waste glasses. These factors include glass composition, solution composition, SA/V (ratio of glass surface area to the volume of solution), radiation, and colloidal formation. These investigations have enabled us to gain a better understanding of the chemical durability of nuclear waste glasses and to accumulate.a data base for modeling the long-term durability of waste glass, which will be used in the risk assessment of nuclear waste disposal. This knowledge gained also enhances our ability to formulate optimal waste glass compositions.
Download or read book Encyclopedia of Glass Science Technology History and Culture Two Volume Set written by Pascal Richet and published by John Wiley & Sons. This book was released on 2021-02-05 with total page 1568 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Encyclopedia begins with an introduction summarizing itsscope and content. Glassmaking; Structure of Glass, GlassPhysics,Transport Properties, Chemistry of Glass, Glass and Light,Inorganic Glass Families, Organic Glasses, Glass and theEnvironment, Historical and Economical Aspect of Glassmaking,History of Glass, Glass and Art, and outlinepossible newdevelopments and uses as presented by the best known people in thefield (C.A. Angell, for example). Sections and chapters arearranged in a logical order to ensure overall consistency and avoiduseless repetitions. All sections are introduced by a briefintroduction and attractive illustration. Newly investigatedtopics will be addresses, with the goal of ensuring that thisEncyclopedia remains a reference work for years to come.
Download or read book Nuclear Waste Glass Product Consistency Test PCT Version 5 0 Revision 2 written by and published by . This book was released on 1992 with total page 50 pages. Available in PDF, EPUB and Kindle. Book excerpt: Liquid high-level nuclear waste will be immobilized at the Savannah River Site (SRS) by vitrification in borosilicate glass. The glass will be produced in the Defense Waste Processing Facility (DWPF), poured into stainless steel canisters, and eventually disposed of in a geologic repository. In order to comply with the Waste Acceptance Preliminary Specifications (WAPS), the durability of the glass needs to be measured during production to assure its long term stability and radionuclide release properties. A durability test, designated the Produce Consistency Test (PCT), was developed for DWPF glass in order to meet the WAPS requirements. The response of the PCT procedure was based on extensive testing with glasses of widely different compositions. The PCT was determined to be very reproducible, to yield reliable results rapidly, and to be easily performed in shielded cell facilities with radioactive samples. Version 5.0 of the PCT procedure is attached.
Download or read book Temperature and Pressure Effects on the Chemical Durability of Borosilicate Simulated Nuclear Waste Glass written by Michael T. Tierney and published by . This book was released on 1983 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Chemical Durability and Related Properties of Solidified High level Waste Forms written by International Atomic Energy Agency and published by . This book was released on 1985 with total page 186 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Chemical Durability of Simulated Nuclear Glasses Containing Water written by and published by . This book was released on 1995 with total page 9 pages. Available in PDF, EPUB and Kindle. Book excerpt: The chemical durability of simulated nuclear waste glasses having different water contents was studied. Results from the product consistency test (PCT) showed that glass dissolution increased with water content in the glass. This trend was not observed during MCC-1 testing. This difference was attributed to the differences in reactions between glass and water. In the PCT, the glass network dissolution controlled the elemental releases, and water in the glass accelerated the reaction rate. On the other hand, alkali ion exchange with hydronium played an important role in the MCC-1. For the latter, the amount of water introduced into a leached layer from ion-exchange was found to be much greater than that of initially incorporated water in the glass. Hence, the initial water content has no effect on glass dissolution as measured by the MCC-1 test.
Download or read book Nuclear Waste Glass Product Consistency Test PCT written by and published by . This book was released on 1994 with total page 50 pages. Available in PDF, EPUB and Kindle. Book excerpt: Liquid high-level nuclear waste will be immobilized at the Savannah River Site (SRS) by vitrification in borosilicate glass. The glass will be produced in the Defense Waste Processing Facility (DWPF), poured into stainless steel canisters, and eventually disposed of in a geologic repository. In order to comply with the Waste Acceptance Product Specifications (WAPS), the durability of the glass needs to be measured during production to assure its long term stability and radionuclide release properties. A durability test, designated the Product Consistency Test (PCT), was developed for DWPF glass in order to meet the WAPS requirements. The response of the PCT procedure was based on extensive testing with glasses of widely different compositions. The PCT was determined to be very reproducible, to yield reliable results rapidly, and to be easily performed in shielded cell facilities with radioactive samples. Version 7.0 of the PCT procedure is attached. This draft version has been submitted to ASTM for full committee (C26, Nuclear Fuel Cycle) ballot after being balloted successfully through subcommittee C26.13 on Repository Waste Package Materials Testing.
