Download or read book Performance Test for Prefabricated Reinforced Components of Autoclaved Aerated Concrete Or Lightweight Aggregate Concrete with Open Structure Under Transverse Load written by British Standards Institute Staff and published by . This book was released on 1997-12 with total page 14 pages. Available in PDF, EPUB and Kindle. Book excerpt: Concretes, Lightweight aggregates, Prefabricated parts, Autoclaves, Performance testing, Cellular concrete, Reinforced concrete, Open, Loading, Test specimens, Mechanical testing, Deflection tests, Splitting tests, Testing conditions, Breaking load, Sag (deformation), Accuracy, Reports
Download or read book Advances and Trends in Structural Engineering Mechanics and Computation written by Alphose Zingoni and published by CRC Press. This book was released on 2010-08-16 with total page 386 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances and Trends in Structural Engineering, Mechanics and Computation features over 300 papers classified into 21 sections, which were presented at the Fourth International Conference on Structural Engineering, Mechanics and Computation (SEMC 2010, Cape Town, South Africa, 6-8 September 2010). The SEMC conferences have been held every 3 years in
Download or read book Products and Services Catalogue written by and published by . This book was released on 2000 with total page 1034 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Structural Engineer written by and published by . This book was released on 1995 with total page 874 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Standards Catalogue written by and published by . This book was released on 1998 with total page 1114 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Performance Test for Prefabricated Reinforced Components Made of Autoclaved Aerated Concrete Or Lightweight Aggregate Concrete with Open Structure Under Predominantly Longitudinal Load Vertical Components written by British Standards Institute Staff and published by . This book was released on 1998-11-15 with total page 10 pages. Available in PDF, EPUB and Kindle. Book excerpt: Concretes, Reinforced concrete, Precast concrete, Cellular concrete, Lightweight aggregates, Prefabricated parts, Construction systems parts, Construction materials, Performance testing, Mechanical testing, Loading, Breaking load, Bend testing, Compression testing, Samples, Test specimens, Vertical, Test equipment, Testing conditions
Download or read book Advanced Building Materials written by and published by . This book was released on 2011 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This collection of papers, which was subjected to strict peer-review by 2 to 4 expert referees, aims to collect together the latest advances in, and applications of, traditional constructional materials, advanced constructional materials and green building materials. It cannot fail to suggest new ideas and strategies to be tried in this field. Review from Book News Inc.: This four-volume set contains peer-reviewed papers from a June 2011 conference, describing the latest achievements, applications, and trends in civil engineering, architecture, and building materials. In addition to covering traditional construction materials, papers also report on research in advanced materials and green building materials. Other areas explored are environmental architecture, equipment engineering, and energy-saving technologies for construction. Some specific paper topics include the behavior of reinforced concrete subjected to boric acid corrosion in a nuclear power plant, fireproof performance of foam concrete insulation board, the application of glazed hollow beads in thermal insulation, and aerated concrete produced by iron tailings. Other subjects examined include application of thermoelectric generation technology in building-integrated photovoltaics, the use of radar technology in concrete water content testing, temperature crack and control measures of long-span beam-type conversion layers, and detection of destruction in urban pavement. Related topics include policies on recycling of construction waste, and construction equipment life-cycle cost studies. Some papers include b & w images. There is no subject index.
Download or read book Precast Concrete Structures written by Alfred Steinle and published by John Wiley & Sons. This book was released on 2019-05-06 with total page 378 pages. Available in PDF, EPUB and Kindle. Book excerpt: Building with precast concrete elements is one of the most innovative forms of construction. This book serves as an introduction to this topic, including examples, and thus supplies all the information necessary for conceptual and detailed design.
Download or read book Brannigan s Building Construction for the Fire Service written by Francis Brannigan and published by Jones & Bartlett Publishers. This book was released on 2010-02-22 with total page 368 pages. Available in PDF, EPUB and Kindle. Book excerpt: Brannigan’s Building Construction for the Fire Service, Fourth Edition is a must read for fire fighters, prospective fire fighters, and fire science students. This edition continues the Brannigan tradition of using plain language to describe technical information about different building types and their unique hazards. This text ensures that critical fire fighting information is easy-to-understand and gives valuable experience to fire fighters before stepping onto the fireground. The first edition of Building Construction for the Fire Service was published in 1971. Frank Brannigan was compelled to write the most comprehensive building construction text for the fire service so that he could save fire fighters’ lives. His passion for detail and extensive practical experience helped him to develop the most popular text on the market. His motto of: “Know your buildings,” informs every aspect of this new edition of the text. Listen to a Podcast with Brannigan's Building Construction for the Fire Service, Fourth Edition co-author Glenn Corbett to learn more about this training program! Glenn discusses his relationship with the late Frank Brannigan, the dangers of heavy construction timber, occupancy specific hazards, and other areas of emphasis within the Fourth Edition. To listen now, visit: http://d2jw81rkebrcvk.cloudfront.net/assets.multimedia/audio/Building_Construction.mp3.
Download or read book Advances in Construction Materials 2007 written by Christian U. Grosse and published by Springer Science & Business Media. This book was released on 2007-08-14 with total page 764 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book is a compilation of recent research results on building construction materials. Civil Engineers and Materials Scientists from all over the world present their ideas for further material developments, the testing of structures and solutions for in situ applications. Many of the innovations, composites and the design of existing material mixes, especially for concrete, are discussed.
Download or read book Advances in Structural Engineering written by Vasant Matsagar and published by Springer. This book was released on 2014-12-12 with total page 1033 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book presents research papers presented by academicians, researchers, and practicing structural engineers from India and abroad in the recently held Structural Engineering Convention (SEC) 2014 at Indian Institute of Technology Delhi during 22 – 24 December 2014. The book is divided into three volumes and encompasses multidisciplinary areas within structural engineering, such as earthquake engineering and structural dynamics, structural mechanics, finite element methods, structural vibration control, advanced cementitious and composite materials, bridge engineering, and soil-structure interaction. Advances in Structural Engineering is a useful reference material for structural engineering fraternity including undergraduate and postgraduate students, academicians, researchers and practicing engineers.
Download or read book Perennial Biomass Crops for a Resource Constrained World written by Susanne Barth and published by Springer. This book was released on 2016-11-18 with total page 313 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a flavour of activities focussed on the need for sustainably produced biomass to support European strategic objectives for the developing bioeconomy. The chapters cover five broad topic areas relating to the use of perennial biomass crops in Europe. These are: ‘Bioenergy Resources from Perennial Crops in Europe’, ‘European Regional Examples for the Use of Perennial Crops for Bioenergy’, ‘Genotypic Selection of Perennial Biomass Crops for Crop Improvement’, ‘Ecophysiology of Perennial Biomass Crops’ and ‘Examples of End-Use of Perennial Biomass Crops’. Two major issues relating to the future use of biomass energy are the identification of the most suitable second generation biomass crops and the need to utilise land not under intensive agricultural production, broadly referred to as ‘marginal land’. The two main categories of plants that fit these needs are perennial rhizomatous grasses and trees that can be coppiced. The overarching questions that are addressed in the book relate to the suitability of perennial crops for providing feedstocks for a European bioeconomy and the need to exploit environments for biomass crops which do not compete with food crops. Bioenergy is the subject of a wide range of national and European policy measures. New developments covered are, for example, the use of perennial grasses to produce protein for animal feed and concepts to use perennial biomass crops to mitigate carbon emissions through soil carbon sequestration. Several chapters also show how prudent selection of suitable genotypes and breeding are essential to develop high yielding and sustainable second generation biomass crops which are adapted to a wide range of unfavourable conditions like chilling and freezing, drought, flooding and salinity. The final chapters also emphasise the need to be kept an eye out for potential new end-uses of perennial biomass crops that will contribute further to the developing bioeconomy.
Download or read book Ultra High Performance Concrete written by Ekkehard Fehling and published by kassel university press GmbH. This book was released on 2008-01-01 with total page 922 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Recent Advances on Green Concrete for Structural Purposes written by Joaquim A.O. Barros and published by Springer. This book was released on 2017-05-29 with total page 427 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is mainly based on the results of the EU-funded UE-FP7 Project EnCoRe, which aimed to characterize the key physical and mechanical properties of a novel class of advanced cement-based materials incorporating recycled powders and aggregates and/or natural ingredients in order to allow partial or even total replacement of conventional constituents. More specifically, the project objectives were to predict the physical and mechanical performance of concrete with recycled aggregates; to understand the potential contribution of recycled fibers as a dispersed reinforcement in concrete matrices; and to demonstrate the feasibility and possible applications of natural fibers as a reinforcement in cementitious composites. All of these aspects are fully covered in the book. The opening chapters explain the material concept and design and discuss the experimental characterization of the physical, chemical, and mechanical properties of the recycled raw constituents, as well as of the cementitious composite incorporating them. The numerical models with potentialities for describing the behavior at material and structural level of constructions systems made by these composites are presented. Finally, engineering applications and guidelines for production and design are proposed.
Download or read book Prefab Architecture written by Ryan E. Smith and published by John Wiley & Sons. This book was released on 2011-06-03 with total page 492 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Prefab Architecture . . . is beyond theory, and beyond most of what we think we know about pods, containers, mods, and joints. This book is more than 'Prefabrication 101.' It is the Joy of Cooking writ large for the architecture and construction industries." From the Foreword by James Timberlake, FAIA THE DEFINITIVE REFERENCE ON PREFAB ARCHITECTURE FOR ARCHITECTS AND CONSTRUCTION PROFESSIONALS Written for architects and related design and construction professionals, Prefab Architecture is a guide to off-site construction, presenting the opportunities and challenges associated with designing and building with components, panels, and modules. It presents the drawbacks of building in situ (on-site) and demonstrates why prefabrication is the smarter choice for better integration of products and processes, more efficient delivery, and realizing more value in project life cycles. In addition, Prefab Architecture provides: A selected history of prefabrication from the Industrial Revolution to current computer numerical control, and a theory of production from integrated processes to lean manufacturing Coverage on the tradeoffs of off-site fabrication including scope, schedule, and cost with the associated principles of labor, risk, and quality Up-to-date products featuring examples of prefabricated structure, enclosure, service, and nterior building systems Documentation on the constraints and execution of manufacturing, factory production, transportation, and assembly Dozens of recent examples of prefab projects by contemporary architects and fabricators including KieranTimberlake, SHoP Architects, Office dA, Michelle Kaufmann, and many others In Prefab Architecture, the fresh approaches toward creating buildings that accurately convey ature and expanded green building methodologies make this book an important voice for adopting change in a construction industry entrenched in traditions of the past.
Download or read book Materials for Architects and Builders written by Arthur Lyons and published by Routledge. This book was released on 2014-08-21 with total page 512 pages. Available in PDF, EPUB and Kindle. Book excerpt: Materials for Architects and Builders provides a clear and concise introduction to the broad range of materials used within the construction industry and covers the essential details of their manufacture, key physical properties, specification and uses. Understanding the basics of materials is a crucial part of undergraduate and diploma construction or architecture-related courses, and this established textbook helps the reader to do just that with the help of colour photographs and clear diagrams throughout. This new edition has been completely revised and updated to include the latest developments in materials research, new images, appropriate technologies and relevant legislation. The ecological effects of building construction and lifetime use remain an important focus, and this new edition includes a wide range of energy saving building components.
Download or read book Building Adaptation written by James Douglas and published by Routledge. This book was released on 2006-08-11 with total page 680 pages. Available in PDF, EPUB and Kindle. Book excerpt: As existing buildings age, nearly half of all construction activity in Britain is related to maintenance, refurbishment and conversions. Building adaptation is an activity that continues to make a significant contribution to the workload of the construction industry. Given its importance to sustainable construction, the proportion of adaptation works in relation to new build is likely to remain substantial for the foreseeable future, especially in the developed parts of the world. Building Adaptation, Second Edition is intended as a primer on the physical changes that can affect older properties. It demonstrates the general principles, techniques, and processes needed when existing buildings must undergo alteration, conversion, extension, improvement, or refurbishment. The publication of the first edition of Building Adaptation reflected the upsurge in refurbishment work. The book quickly established itself as one of the core texts for building surveying students and others on undergraduate and postgraduate built environment courses. This new edition continues to provide a comprehensive introduction to all the key issues relating to the adaptation of buildings. It deals with any work to a building over and above maintenance to change its capacity, function or performance.
