Download or read book Performance of Wood Frame Wall with Thin Shell ECC Shear Panel written by Michael C. Lewis and published by . This book was released on 2009 with total page 184 pages. Available in PDF, EPUB and Kindle. Book excerpt: The overall goal of this study was to evaluate an alternative to traditional wood framed shear wall construction. This study introduced the innovative idea of using a water and seismic damage resistant, wood-concrete- composite (WCC) construction instead of an all-wood design. The WCC design consisted of a thin shell of engineered cementitious composite (ECC) cast in composite with a traditional wood frame. The WCC wall was evaluated with regards to structural performance during lateral loading, cost and damage sustained during lateral loading. The WCC test results were compared to a traditional wood frame wall with OSB sheathing. Data from the monotonic tests of the WCC walls show that the average maximum load was 47.5 kN (10700 lb), average elastic shear stiffness was 1.78 kN/mm (10200 lb/in) and the average energy absorbed was 4810 J (42600 lb-in). Overall, the test results indicate that the WCC is comparable with or superior to the OSB wall in regards to shear strength, shear stiffness, energy absorption and ductility. During lateral loading tests the WCC wall appeared to sustain less damage than the OSB wall. Panelized construction of the WCC system may increase overall project cost but could provide many additional benefits such as decreased construction time and greater durability. The WCC design appears to be a viable shear wall system that should be refined and fully tested for building code compliance.

Download or read book Historical Earthquake Resistant Timber Frames in the Mediterranean Area written by Nicola Ruggieri and published by Springer. This book was released on 2016-10-06 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a selection of the best papers from the HEaRT 2013 conference, held in Cosenza, Italy, which provided a valuable forum for engineers and architects, researchers and educators to exchange views and findings concerning the technological history, construction features and seismic behavior of historical timber-framed walls in the Mediterranean countries. The topics covered are wide ranging and include historical aspects and examples of the use of timber-framed construction systems in response to earthquakes, such as the gaiola system in Portugal and the Bourbon system in southern Italy; interpretation of the response of timber-framed walls to seismic actions based on calculations and experimental tests; assessment of the effectiveness of repair and strengthening techniques, e.g., using aramid fiber wires or sheets; and modelling analyses. In addition, on the basis of case studies, a methodology is presented that is applicable to diagnosis, strengthening and improvement of seismic performance and is compatible with modern theoretical principles and conservation criteria. It is hoped that, by contributing to the knowledge of this construction technique, the book will help to promote conservation of this important component of Europe’s architectural heritage.

Download or read book The Plastic Methods of Structural Analysis written by Bernard George Neal and published by Taylor & Francis. This book was released on 1977-01-01 with total page 205 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Textile Reinforced Cement Composites written by Jan Wastiels and published by MDPI. This book was released on 2020-03-05 with total page 284 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Special Issue presents the latest advances in the field of Textile-Reinforced Cement Composites, including Textile-Reinforced Concrete (TRC), Textile-Reinforced Mortar (TRM), Fabric-Reinforced Cementitious Matrix (FRCM), etc. These composite materials distinguish themselves from other fibre-reinforced concrete materials by their strain-hardening behaviour under tensile loading. This Special Issue is composed of 14 papers covering new insights in structural and material engineering. The papers include investigations on the level of the fibre reinforcement system as well as on the level of the composites, investigating their impact and fatigue behaviour, durability and fire behaviour. Both the strengthening of existing structures and the development of new structural systems such as lightweight sandwich systems are presented, and analysis and design methods are discussed. This Special Issue demonstrates the broadness and intensity of the ongoing advancements in the field of Textile-Reinforced Cement composites and the importance of several future research directions.

Download or read book Designing Tall Buildings written by Mark Sarkisian and published by Routledge. This book was released on 2012-03-22 with total page 222 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first of its kind, Designing Tall Buildings is an accessible reference that guides you through the fundamental principles of designing high-rises. Each chapter focuses on one theme central to tall-building design, giving you a comprehensive overview of the related architecture and structural engineering concepts. Mark P. Sarkisian provides clear definitions of technical terms and introduces important equations, to help you gradually develop your knowledge. Later chapters allow you to explore more complex applications, such as biomimicry. Projects drawn from Skidmore, Owings and Merrill’s vast catalog of built high-rises, many of which Sarkisian designed, demonstrate these concepts. This book advises you to consider the influence of a particular site’s geology, wind conditions, and seismicity. Using this contextual knowledge and analysis, you can determine what types of structural solutions are best suited for a tower on that site. You can then conceptualize and devise efficient structural systems that are not only safe, but also constructible and economical. Sarkisian also addresses the influence of nature in design, urging you to integrate structure and architecture for buildings of superior performance, sustainability, and aesthetic excellence.

Download or read book Design of Steel Concrete Composite Structures Using High Strength Materials written by J.Y. Richard Liew and published by Woodhead Publishing. This book was released on 2021-08-04 with total page 256 pages. Available in PDF, EPUB and Kindle. Book excerpt: High-strength materials offer alternatives to frequently used materials for high-rise construction. A material of higher strength means a smaller member size is required to resist the design load. However, high-strength concrete is brittle, and high-strength thin steel plates are prone to local buckling. A solution to overcome such problems is to adopt a steel-concrete composite design in which concrete provides lateral restraint to steel plates against local buckling, and steel plates provide confinement to high-strength concrete. Design of Steel-Concrete Composite Structures Using High Strength Materials provides guidance on the design of composite steel-concrete structures using combined high-strength concretes and steels. The book includes a database of over 2,500 test results on composite columns to evaluate design methods, and presents calculations to determine critical parameters affecting the strength and ductility of high-strength composite columns. Finally, the book proposes design methods for axial-moment interaction curves in composite columns. This allows a unified approach to the design of columns with normal- and high-strength steel concrete materials. This book offers civil engineers, structural engineers, and researchers studying the mechanical performance of composite structures in the use of high-strength materials to design and construct advanced tall buildings. - Presents the design and construction of composite structures using high-strength concrete and high-strength steel, complementing and extending Eurocode 4 standards - Addresses a gap in design codes in the USA, China, Europe and Japan to cover composite structures using high-strength concrete and steel in a comprehensive way - Gives insight into the design of concrete-filled steel tubes and concrete-encased steel members - Suggests a unified approach to designing columns with normal- and high-strength steel and concrete

Download or read book An Introduction to Sandwich Construction written by Dan Zenkert and published by Twayne Publishers. This book was released on 1995 with total page 277 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Ultra High Performance Concrete UHPC written by Michael Schmidt and published by . This book was released on 2004 with total page 892 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Advances in Structural Engineering written by Vasant Matsagar and published by Springer. This book was released on 2014-12-12 with total page 1033 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book presents research papers presented by academicians, researchers, and practicing structural engineers from India and abroad in the recently held Structural Engineering Convention (SEC) 2014 at Indian Institute of Technology Delhi during 22 – 24 December 2014. The book is divided into three volumes and encompasses multidisciplinary areas within structural engineering, such as earthquake engineering and structural dynamics, structural mechanics, finite element methods, structural vibration control, advanced cementitious and composite materials, bridge engineering, and soil-structure interaction. Advances in Structural Engineering is a useful reference material for structural engineering fraternity including undergraduate and postgraduate students, academicians, researchers and practicing engineers.

Download or read book Engineered Cementitious Composites ECC written by Victor C. Li and published by Springer. This book was released on 2019-04-30 with total page 419 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the first book on Engineered Cementitious Composites (ECC), an advanced concrete material attracting world-wide attention in both the academic community and in industry. The book presents a comprehensive coverage of the material design methodology, processing methodology, mechanical and durability properties, smart functions, and application case studies. It combines effective use of illustrations, graphical data, and tables. It de-emphasizes mathematics in favor of physical understanding. The book serves as an introduction to the subject matter, or as a reference to those conducting research in ECC. It will also be valuable to engineers who need to quickly search for relevant information in a single comprehensive text.

Download or read book Timber Engineering written by Sven Thelandersson and published by John Wiley & Sons. This book was released on 2003-03-14 with total page 460 pages. Available in PDF, EPUB and Kindle. Book excerpt: Timber construction is one of the most prevalent methods of constructing buildings in North America and an increasingly significant method of construction in Europe and the rest of the world. Timber Engineering deals not only with the structural aspects of timber construction, structural components, joints and systems based on solid timber and engineered wood products, but also material behaviour and properties on a wood element level. Produced by internationally renowned experts in the field, this book represents the state of the art in research on the understanding of the material behaviour of solid wood and engineered wood products. There is no comparable compendium currently available on the topic - the subjects represented include the most recent phenomena of timber engineering and the newest development of practice-related research. Grouped into three different sections, 'Basic properties of wood-based structural elements', 'Design aspects on timber structures' and 'Joints and structural assemblies', this book focuses on key issues in the understanding of: timber as a modern engineered construction material with controlled and documented properties the background for design of structural systems based on timber and engineered wood products the background for structural design of joints in structural timber systems Furthermore, this invaluable book contains advanced teaching material for all technical schools and universities involved in timber engineering. It also provides an essential resource for timber engineering students and researchers, as well as practicing structural and civil engineers.

Download or read book Advances in Construction Materials 2007 written by Christian U. Grosse and published by Springer Science & Business Media. This book was released on 2007-08-14 with total page 764 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book is a compilation of recent research results on building construction materials. Civil Engineers and Materials Scientists from all over the world present their ideas for further material developments, the testing of structures and solutions for in situ applications. Many of the innovations, composites and the design of existing material mixes, especially for concrete, are discussed.

Download or read book Reinforced Concrete written by James Grierson MacGregor and published by Prentice Hall. This book was released on 1997 with total page 939 pages. Available in PDF, EPUB and Kindle. Book excerpt: Based on the 1995 edition of the American Concrete Institute Building Code, this text explains the theory and practice of reinforced concrete design in a systematic and clear fashion, with an abundance of step-by-step worked examples, illustrations, and photographs. The focus is on preparing students to make the many judgment decisions required in reinforced concrete design, and reflects the author's experience as both a teacher of reinforced concrete design and as a member of various code committees. This edition provides new, revised and expanded coverage of the following topics: core testing and durability; shrinkage and creep; bases the maximum steel ratio and the value of the factor on Appendix B of ACI318-95; composite concrete beams; strut-and-tie models; dapped ends and T-beam flanges. It also expands the discussion of STMs and adds new examples in SI units.

Download or read book Proceedings of SECON 2020 written by Kaustubh Dasgupta and published by Springer Nature. This book was released on 2020-11-20 with total page 959 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers peer-reviewed contributions presented at the 1st International Conference on Structural Engineering and Construction Management (SECON’20), held in Angamaly, Kerala, India, on 14-15 May 2020. The meeting served as a fertile platform for discussion, sharing sound knowledge and introducing novel ideas on issues related to sustainable construction and design for the future. The respective contributions address various aspects of numerical modeling and simulation in structural engineering, structural dynamics and earthquake engineering, advanced analysis and design of foundations, BIM, building energy management, and technical project management. Accordingly, the book offers a valuable, up-to-date tool and essential overview of the subject for scientists and practitioners alike, and will inspire further investigations and research.

Download or read book Unified Theory of Concrete Structures written by Thomas T. C. Hsu and published by John Wiley & Sons. This book was released on 2010-03-16 with total page 518 pages. Available in PDF, EPUB and Kindle. Book excerpt: Unified Theory of Concrete Structures develops an integrated theory that encompasses the various stress states experienced by both RC & PC structures under the various loading conditions of bending, axial load, shear and torsion. Upon synthesis, the new rational theories replace the many empirical formulas currently in use for shear, torsion and membrane stress. The unified theory is divided into six model components: a) the struts-and-ties model, b) the equilibrium (plasticity) truss model, c) the Bernoulli compatibility truss model, d) the Mohr compatibility truss model, e) the softened truss model, and f) the softened membrane model. Hsu presents the six models as rational tools for the solution of the four basic types of stress, focusing on the significance of their intrinsic consistencies and their inter-relationships. Because of its inherent rationality, this unified theory of reinforced concrete can serve as the basis for the formulation of a universal and international design code. Includes an appendix and accompanying website hosting the authors’ finite element program SCS along with instructions and examples Offers comprehensive coverage of content ranging from fundamentals of flexure, shear and torsion all the way to non-linear finite element analysis and design of wall-type structures under earthquake loading. Authored by world-leading experts on torsion and shear

Download or read book Second RILEM International Conference on Concrete and Digital Fabrication written by Freek P. Bos and published by Springer Nature. This book was released on 2020-07-08 with total page 1209 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers peer-reviewed contributions presented at the 2nd RILEM International Conference on Concrete and Digital Fabrication (Digital Concrete), held online and hosted by the Eindhoven University of Technology, the Netherlands from 6-9 July 2020. Focusing on additive and automated manufacturing technologies for the fabrication of cementitious construction materials, such as 3D concrete printing, powder bed printing, and shotcrete 3D printing, the papers highlight the latest findings in this fast-growing field, addressing topics like mixture design, admixtures, rheology and fresh-state behavior, alternative materials, microstructure, cold joints & interfaces, mechanical performance, reinforcement, structural engineering, durability and sustainability, automation and industrialization.

Download or read book 10th International Conference on FRP Composites in Civil Engineering written by Alper Ilki and published by Springer Nature. This book was released on 2021-11-26 with total page 2516 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume highlights the latest advances, innovations, and applications in the field of FRP composites and structures, as presented by leading international researchers and engineers at the 10th International Conference on Fibre-Reinforced Polymer (FRP) Composites in Civil Engineering (CICE), held in Istanbul, Turkey on December 8-10, 2021. It covers a diverse range of topics such as All FRP structures; Bond and interfacial stresses; Concrete-filled FRP tubular members; Concrete structures reinforced or pre-stressed with FRP; Confinement; Design issues/guidelines; Durability and long-term performance; Fire, impact and blast loading; FRP as internal reinforcement; Hybrid structures of FRP and other materials; Materials and products; Seismic retrofit of structures; Strengthening of concrete, steel, masonry and timber structures; and Testing. The contributions, which were selected by means of a rigorous international peer-review process, present a wealth of exciting ideas that will open novel research directions and foster multidisciplinary collaboration among different specialists.