Download or read book Bubble Column Reactions written by Wolf-Dieter Deckwer and published by John Wiley & Sons. This book was released on 1992-04-08 with total page 564 pages. Available in PDF, EPUB and Kindle. Book excerpt: This technology, though used for many years, has shown great vitality recently and is still in a state of flux. Provides an account of developments up to the present and also an orderly evaluation of literature already published on the subject. Considerable space is devoted to bubble column reactor performance predictions based on mathematical models and the importance of each is explained with practical examples.

Download or read book Microreactors for Gas Liquid Reactions written by Kristin Hecht and published by Western Engineering, Inc.. This book was released on 2014-01-01 with total page 160 pages. Available in PDF, EPUB and Kindle. Book excerpt: The widespread adoption of microreactors has been hindered by a lack of knowledge regarding rules and parameters needed for their design. This dissertation deals with the investigation of interfacial area and liquid mass transport in microreactors for gas/liquid reactions. Observations of a reduction in conversion occurring when changing from a glass laboratory device to a stainless steel process device motivated investigations into the effect of material and surface properties on the gas/liquid flow and reaction. This work takes a look inside the machined microstructures produced at the Institute for Micro Process Engineering of the Karlsruhe Institute of Technology and investigates the nature of the solid surfaces resulting from the machining process—the surface roughness and the contact angle of the resulting surface. The effect of wettability on gas/liquid flow in microreactors has been investigated in capillaries of various materials. The absorption of carbon dioxide into aqueous solutions of sodium hydroxide has been used to investigate gas/liquid flow and reaction in capillaries and in a microstructured falling film reactor. Under certain limiting assumptions depending upon the exact rates of reaction and transport, values of the interfacial area and liquid mass transport coefficient can be derived from measurements of reaction. This dissertation contributes a small step towards a better understanding of how measurements of the interfacial area and mass transfer coefficient can be performed, demonstrates why the effect of material wettability cannot be ignored, and provides a stronger basis for further work in the development of general correlations describing microstructured gas/liquid reactors.

Download or read book Packed Bed Columns written by Nikolai Kolev and published by Elsevier. This book was released on 2006-08-08 with total page 709 pages. Available in PDF, EPUB and Kindle. Book excerpt: Packed bed columns are largely employed for absorption, desorption, rectification and direct heat transfer processes in chemical and food industry, environmental protection and also processes in thermal power stations like water purification, flue gas heat utilization and SO2 removal. These Separation processes, are estimated to account for 40%-70% of capital and operating costs in process industry. Packed bed columns are widely employed in this area. Their usage also for direct heat transfer between gas and liquid, enlarge their importance. They are the best apparatuses, from thermodynamical point of view, for mass and heat transfer processes between gas and liquid phase. Their wide spreading is due to low capital investments and operating costs. Since 1995 there has not been published a specialised book in this area, and this is a period of quick development of packed columns. Packed Bed Columns reflects the state of this field including the author's experience on creating and investigating of new packings, column internals and industrial columns. - Considers the theories of mass transfer processes and shows how they help the construction of highly effective packings - Complete information about the performance characteristics of different modern types of highly effective packings - Considers the models for calculation and areas of their application

Download or read book Hydrodynamics and Transport Processes of Inverse Bubbly Flow written by Subrata Kumar Majumder and published by Elsevier. This book was released on 2016-03-31 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hydrodynamics and Transport Processes of Inverse Bubbly Flow provides the science and fundamentals behind hydrodynamic characteristics, including flow regimes, gas entrainment, pressure drop, holdup and mixing characteristics, bubble size distribution, and the interfacial area of inverse bubble flow regimes. Special attention is given to mass and heat transfer. This book is an indispensable reference for researchers in academia and industry working in chemical and biochemical engineering. Hydrodynamics and Transport Processes of Inverse Bubbly Flow helps facilitate a better understanding of the phenomena of multiphase flow systems as used in chemical and biochemical industries. - A first book in the market dedicated to the hydrodynamics of inverse bubbly flows - Includes fundamentals of conventional and inverse bubble columns for different hydrodynamic parameters - Includes recommendations for future applications of bubble flows

Download or read book Waste Biorefinery written by Thallada Bhaskar and published by Elsevier. This book was released on 2018-04-13 with total page 892 pages. Available in PDF, EPUB and Kindle. Book excerpt: Waste Biorefinery: Potential and Perspectives offers data-based information on the most cutting-edge processes for the utilisation of biogenic waste to produce biofuels, energy products, and biochemicals – a critical aspect of biorefinery. The book explores recent developments in biochemical and thermo-chemical methods of conversion and the potential generated by different kinds of biomass in more decentralized biorefineries. Additionally, the book discusses the move from 200 years of raw fossil materials to renewable resources and how this shift is accompanied by fundamental changes in industrial manufacturing technologies (from chemistry to biochemistry) and in logistics and manufacturing concepts (from petrochemical refineries to biorefineries). Waste Biorefinery: Potential and Perspectives designs concepts that enable modern biorefineries to utilize all types of biogenic wastes, and to integrate processes that convert byproduct streams to high-value products, achieving higher cost benefits. This book is an essential resource for researchers and students studying biomass, biorefineries, and biofuels/products/processes, as well as chemists, biochemical/chemical engineers, microbiologists, and biotechnologists working in industries and government agencies. - Details the most advanced and innovative methods for biomass conversion - Covers biochemical and thermo-chemical processes as well as product development - Discusses the integration of technologies to produce bio-fuels, energy products, and biochemicals - Illustrates specific applications in numerous case studies for reference and teaching purposes

Download or read book Biofuels from Algae written by Kuan-Yeow Show and published by Elsevier Inc. Chapters. This book was released on 2013-08-08 with total page 48 pages. Available in PDF, EPUB and Kindle. Book excerpt: Extensive effort is being made globally to develop various biofuels as an inexhaustible and renewable energy source. Biofuels are viewed as promising alternatives to conventional fossil fuels because they have the potential to eliminate major environmental problems such as global warming and climate change created by fossil fuels. Among the still-developing biofuel technologies, biodiesel production from algae offers a good prospect for large-scale practical use, considering the fact that algae are capable of producing much more yield than other biofuels such as corn and soybean crops. Although research on algae-based biofuel is still in its developing stage, extensive work on laboratory- and pilot-scale algae-harvesting systems with promising prospects has been reported. This chapter presents a discussion of the literature review of recent advances in algal biomass harvesting. The chapter focuses on stability and separability of algae and algae-harvesting methods. Challenges and prospects of algae harvesting are also outlined. The review aims to provide useful information for future development of efficient and commercially viable algal biodiesel production.

Download or read book Fluid Dynamics of Packed Columns written by Jerzy Mackowiak and published by Springer Science & Business Media. This book was released on 2009-12-10 with total page 368 pages. Available in PDF, EPUB and Kindle. Book excerpt: The?rstGermanedition of thebook“Fluiddynamicsofpackedcolumns with modern random and structured packings for gas/liquid systems” was published in 1991. It sold out within a few years. Added to this were numerous enquiries, in particular within the industry, prompting me to publish a second, extended edition. A packed column remains the core element of any diffusional separation process. This underlines the need for basic design principles for packed columns, which enhance the design process by making it more accurate and reliable. The SBD (suspended bed of droplets) model introduced in the ?rst German edition of the book was well received by the experts and is now used by a large number of com- nies in the industry, as it offers improved reliability in the ?uid dynamic design of packed columns. For the purpose of facilitating the design process, the SBD model was in- grated into the simulation programme ChemCAD. The software programme FDPAK, which is available for Windows, has certainly contributed to the widespread use of the SBD model. The programme is very user-friendly and the calculation results are p- sented in tabular as well as graphic form, showing ?ood load, pressure drop and hold-up diagrams in the entire operating range.

Download or read book Bubbly Flows written by Martin Sommerfeld and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 354 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book summarises the outcom of a priority research programme: 'Analysis, Modelling and Computation of Multiphase Flows'. The results of 24 individual research projects are presented. The main objective of the research programme was to provide a better understanding of the physical basis for multiphase gas-liquid flows as they are found in numerous chemical and biochemical reactors. The research comprises steady and unsteady multiphase flows in three frequently found reactor configurations, namely bubble columns without interiors, airlift loop reactors, and aerated stirred vessels. For this purpose new and improved measurement techniques were developed. From the resulting knowledge and data, new and refined models for describing the underlying physical processes were developed, which were used for the establishment and improvement of analytic as well as numerical methods for predicting multiphase reactors. Thereby, the development, lay-out and scale-up of such processes should be possible on a more reliable basis.

Download or read book Airlift Bioreactors written by M. Y. Chisti and published by Springer. This book was released on 1989-02-28 with total page 368 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Essentials of Fluidization Technology written by John R. Grace and published by John Wiley & Sons. This book was released on 2020-06-15 with total page 626 pages. Available in PDF, EPUB and Kindle. Book excerpt: A concise and clear treatment of the fundamentals of fluidization, with a view to its applications in the process and energy industries.

Download or read book Multiphase Flows for Process Industries written by Vivek V. Ranade and published by John Wiley & Sons. This book was released on 2022-03-30 with total page 838 pages. Available in PDF, EPUB and Kindle. Book excerpt: Discover the cutting-edge in multiphase flows used in the process industries In Multiphase Flows for Process Industries: Fundamentals and Applications, a team of accomplished chemical engineers delivers an insightful and complete treatment of the state-of-the-art in commonly encountered multiphase flows in the process industries. After discussing the theoretical background, experimental methods, and computational methods applicable to multiphase flows, the authors explore specific examples from the process industries. The book covers a wide range of multiphase flows, including gas-solid fluidized beds and flows with phase change. It also provides direction on how to use current advances in the field to realize efficient and optimized processes. Filling the gap between theory and practice, this unique reference also includes: A thorough introduction to multiphase flows and the process industry Practical discussions of flow regimes, lower order models and correlations, and the chronological development of mathematical models for multiphase flows Comprehensive explorations of experimental methods for characterizing multiphase flows, including flow imaging and visualization In-depth examinations of computational models for simulating multiphase flows Perfect for chemical and process engineers, Multiphase Flows for Process Industries: Fundamentals and Applications is required reading for graduate and doctoral students in the engineering sciences, as well as professionals in the chemical industry.

Download or read book Design of Multiphase Reactors written by Vishwas G. Pangarkar and published by John Wiley & Sons. This book was released on 2015-01-27 with total page 532 pages. Available in PDF, EPUB and Kindle. Book excerpt: Details simple design methods for multiphase reactors in the chemical process industries Includes basic aspects of transport in multiphase reactors and the importance of relatively reliable and simple procedures for predicting mass transfer parameters Details of design and scale up aspects of several important types of multiphase reactors Examples illustrated through design methodologies presenting different reactors for reactions that are industrially important Includes simple spreadsheet packages rather than complex algorithms / programs or computational aid

Download or read book Intensification of Liquid Liquid Processes written by Laurence R. Weatherley and published by Cambridge University Press. This book was released on 2020-04-16 with total page 379 pages. Available in PDF, EPUB and Kindle. Book excerpt: Explore and review novel techniques for intensifying transport and reaction in liquid-liquid and related systems with this essential toolkit. Topics include discussion of the principles of process intensification, the nexus between process intensification and sustainable engineering, and the fundamentals of liquid-liquid contacting, from an expert with over forty-five years' experience in the field. Providing promising directions for investment and for new research in process intensification, in addition to a unique review of the fundamentals of the topic, this book is the perfect guide for senior undergraduate students, graduate students, developers, and research staff in chemical engineering and biochemical engineering.

Download or read book The Numerical Method of Lines written by William E. Schiesser and published by Elsevier. This book was released on 2012-07-27 with total page 341 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the first book on the numerical method of lines, a relatively new method for solving partial differential equations. The Numerical Method of Lines is also the first book to accommodate all major classes of partial differential equations. This is essentially an applications book for computer scientists. The author will separately offer a disk of FORTRAN 77 programs with 250 specific applications, ranging from "Shuttle Launch Simulation" to "Temperature Control of a Nuclear Fuel Rod."

Download or read book Energy Efficient Solvents for CO2 Capture by Gas Liquid Absorption written by Wojciech M. Budzianowski and published by Springer. This book was released on 2016-12-01 with total page 282 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book reviews and characterises promising single-compound solvents, solvent blends and advanced solvent systems suitable for CO2 capture applications using gas-liquid absorption. Focusing on energy efficient solvents with minimal adverse environmental impact, the contributions included analyse the major technological advantages, as well as research and development challenges of promising solvents and solvent systems in various sustainable CO2 capture applications. It provides a valuable source of information for undergraduate and postgraduate students, as well as for chemical engineers and energy specialists.

Download or read book Chemical Reaction and Reactor Engineering written by James John Carberry and published by CRC Press. This book was released on 2020-08-27 with total page 1086 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents an authoritative progress report that will remain germane to the topic and prove to be a substantial inspiration to further progress. It is valuable to academic and industrial practitioners of the art and science of chemical reaction and reactor engineering.

Download or read book Chemical Reactors for Gas liquid Systems written by František Kaštánek and published by Prentice Hall. This book was released on 1993 with total page 420 pages. Available in PDF, EPUB and Kindle. Book excerpt: Originating from a research programme carried out at the Institute of Chemical Process Fundamentals, Prague, this volume aims to provide a review of current knowledge in the field of gas-liquid reactors, relating the results of theoretical studies to practical reactor design.