Download or read book Performance of DFIG and PMSG Wind Turbines written by Kenneth Okedu and published by CRC Press. This book was released on 2023-04-05 with total page 235 pages. Available in PDF, EPUB and Kindle. Book excerpt: Due to environmental pollution and climate change, the use of renewable energy sources as an alternative means of power generation is on the rise globally. This is because of their clean nature, which makes them ecofriendly with little or no pollution compared to the traditional fossil fuel power-generation power plants. Among the various renewable energy sources, wind energy is one of the most widely employed, due to its promising technology. Wind turbine technologies could be classified into two groups as follows: Fixed Speed Wind Turbines (FSWTs) and Variable Speed Wind Turbines (VSWTs). There have been tremendous improvements in wind turbine technology over the years, from FSWTs to VSWTs, as a result of fast innovations and advanced developments in power electronics. Thus, the VSWTs have better wind energy capture and conversion efficiencies, less acoustic noise and mechanical stress, and better power quality in power grids without support from external reactive power compensators due to the stochastic nature of wind energy. The two most widely employed VSWTs in wind farm development are the Doubly Fed Induction Generator (DFIG) and the Permanent Magnet Synchronous Generator (PMSG) wind turbines. In order to solve transient stability intricacies during power grid faults, this book proposes different control strategies for the DFIG and PMSG wind turbines.

Download or read book Stability Control and Reliable Performance of Wind Turbines written by Kenneth Eloghene Okedu and published by BoD – Books on Demand. This book was released on 2018-10-10 with total page 198 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is intended for academics and engineers working in universities, research institutes, and industry sectors wishing to acquire new information and enhance their knowledge of the current trends in wind turbine technology. Readers will gain new ideas and special experience with in-depth information about modeling, stability control, assessment, reliability, and future prospects of wind turbines. This book contains a number of problems and solutions that can be integrated into larger research findings and projects. The book enhances studies concerning the state of the art of wind turbines, modeling and intelligent control of wind turbines, power quality of wind turbines, robust controllers for wind turbines in cold weather, etc. The book also looks at recent developments in wind turbine supporting structures, noise reduction estimation methods, reliability and prospects of wind turbines, etc. As I enjoyed preparing this book, I am sure that it will be valuable for a large sector of readers.

Download or read book Renewable Energy Systems written by M. Godoy Simões and published by CRC Press. This book was released on 2004-05-11 with total page 386 pages. Available in PDF, EPUB and Kindle. Book excerpt: As the world moves toward renewable energy sources to combat environmental and power distribution issues, there has been a resurgence of interest in induction generators, particularly in their use in wind and hydropower generation systems. Induction machines operating as generators are rugged and cost effective, and with recent advances in control and optimization, the control design aspects are now moving from the laboratory to the desks of practicing engineers. Renewable Energy Systems: Design and Analysis with Induction Generators presents the first comprehensive exposition of induction machines used for power generation. Focusing on renewable energy applications, the authors address virtually all aspects of the design, operation, and analysis of these systems, from the very basics to the latest technologies, including: New methods of characteristics testing, aimed at reduced test time, precision, and automation Reactive compensation techniques Control, including scalar control, vector control, and optimization techniques for peak power tracking control Interconnecting induction generators to the main grid Behavior in the presence of switched and controlled electronic converters Using PSPICE, MATLAB, PSIM, C, Pascal and Excel for modeling and simulation Robust, economical, and low maintenance, induction generators hold outstanding potential for helping to fulfill the world's energy needs. This book provides the background and the tools you need to begin developing power plants and become expert in the applications and deployment of induction generator systems.

Download or read book Performance of DFIG and PMSG Wind Turbines written by Kenneth Eloghene Okedu and published by . This book was released on 2023 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Due to environmental pollution and climate change, the use of renewable energy sources as an alternative means of power generation is on the rise globally. This is because of their clean nature, which makes them ecofriendly with little or no pollution compared to the traditional fossil fuel power-generation power plants. Among the various renewable energy sources, wind energy is one of the most widely employed, due to its promising technology. Wind turbine technologies could be classified into two groups as follows: Fixed Speed Wind Turbines (FSWTs) and Variable Speed Wind Turbines (VSWTs). There have been tremendous improvements in wind turbine technology over the years, from FSWTs to VSWTs, as a result of fast innovations and advanced developments in power electronics. Thus, the VSWTs have better wind energy capture and conversion efficiencies, less acoustic noise and mechanical stress, and better power quality in power grids without support from external reactive power compensators due to the stochastic nature of wind energy. The two most widely employed VSWTs in wind farm development are the Doubly Fed Induction Generator (DFIG) and the Permanent Magnet Synchronous Generator (PMSG) wind turbines. In order to solve transient stability intricacies during power grid faults, this book proposes different control strategies for the DFIG and PMSG wind turbines.

Download or read book MARE WINT written by Wiesław Ostachowicz and published by Springer. This book was released on 2016-08-30 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a holistic, interdisciplinary overview of offshore wind energy, and is a must-read for advanced researchers. Topics, from the design and analysis of future turbines, to the decommissioning of wind farms, are covered. The scope of the work ranges from analytical, numerical and experimental advancements in structural and fluid mechanics, to novel developments in risk, safety & reliability engineering for offshore wind.The core objective of the current work is to make offshore wind energy more competitive, by improving the reliability, and operations and maintenance (O&M) strategies of wind turbines. The research was carried out under the auspices of the EU-funded project, MARE-WINT. The project provided a unique opportunity for a group of researchers to work closely together, undergo multidisciplinary doctoral training, and conduct research in the area of offshore wind energy generation. Contributions from expert, external authors are also included, and the complete work seeks to bridge the gap between research and a rapidly-evolving industry.

Download or read book 2021 IEEE International Conference on Environment and Electrical Engineering and 2021 IEEE Industrial and Commercial Power Systems Europe EEEIC I CPS Europe written by IEEE Staff and published by . This book was released on 2021-09-07 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: The aim of the conferences is to give the opportunity of a genuine and constructive dialogue among participants on the hot topics and far reaching challenges that engineers and scientists are called to face in the present days The conference is so a precious chance to discuss recent developments and practical applications in crucial areas, such as sustainable and renewable energy production, energy storage, smart grids, energy conversion, sustainable transport systems, EMC control in lightning and grounding systems, novel materials and nanotechnology

Download or read book Performance of DFIG and PMSG Wind Turbines written by Kenneth Okedu and published by . This book was released on 2023-03-14 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Due to environmental pollution and climate change, the use of renewable energy sources as an alternative means of power generation is on the rise globally. This is because of their clean nature, which makes them ecofriendly with little or no pollution compared to the traditional fossil fuel power-generation power plants. Among the various renewable energy sources, wind energy is one of the most widely employed, due to its promising technology. Wind turbine technologies could be classified into two groups as follows: Fixed Speed Wind Turbines (FSWTs) and Variable Speed Wind Turbines (VSWTs). There have been tremendous improvements in wind turbine technology over the years, from FSWTs to VSWTs, as a result of fast innovations and advanced developments in power electronics. Thus, the VSWTs have better wind energy capture and conversion efficiencies, less acoustic noise and mechanical stress, and better power quality in power grids without support from external reactive power compensators due to the stochastic nature of wind energy. The two most widely employed VSWTs in wind farm development are the Doubly Fed Induction Generator (DFIG) and the Permanent Magnet Synchronous Generator (PMSG) wind turbines. In order to solve transient stability intricacies during power grid faults, this book proposes different control strategies for the DFIG and PMSG wind turbines.

Download or read book Wind Energy Generation Modelling and Control written by Olimpo Anaya-Lara and published by John Wiley & Sons. This book was released on 2011-08-24 with total page 222 pages. Available in PDF, EPUB and Kindle. Book excerpt: WIND ENERGY GENERATION WIND ENERGY GENERATION MODELLING AND CONTROL With increasing concern over climate change and the security of energy supplies, wind power is emerging as an important source of electrical energy throughout the world. Modern wind turbines use advanced power electronics to provide efficient generator control and to ensure compatible operation with the power system. Wind Energy Generation describes the fundamental principles and modelling of the electrical generator and power electronic systems used in large wind turbines. It also discusses how they interact with the power system and the influence of wind turbines on power system operation and stability. Key features: Includes a comprehensive account of power electronic equipment used in wind turbines and for their grid connection. Describes enabling technologies which facilitate the connection of large-scale onshore and offshore wind farms. Provides detailed modelling and control of wind turbine systems. Shows a number of simulations and case studies which explain the dynamic interaction between wind power and conventional generation.

Download or read book Power Conversion and Control of Wind Energy Systems written by Bin Wu and published by John Wiley & Sons. This book was released on 2011-08-09 with total page 480 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book presents the latest power conversion and control technology in modern wind energy systems. It has nine chapters, covering technology overview and market survey, electric generators and modeling, power converters and modulation techniques, wind turbine characteristics and configurations, and control schemes for fixed- and variable-speed wind energy systems. The book also provides in-depth steady-state and dynamic analysis of squirrel cage induction generator, doubly fed induction generator, and synchronous generator based wind energy systems. To illustrate the key concepts and help the reader tackle real-world issues, the book contains more than 30 case studies and 100 solved problems in addition to simulations and experiments. The book serves as a comprehensive reference for academic researchers and practicing engineers. It can also be used as a textbook for graduate students and final year undergraduate students.

Download or read book Wind Energy Conversion Systems written by S.M. Muyeen and published by Springer Science & Business Media. This book was released on 2012-01-04 with total page 532 pages. Available in PDF, EPUB and Kindle. Book excerpt: This exploration of the technical progress of wind energy conversion systems also examines potential future trends and includes recently developed systems such as those for multi-converter operation of variable-speed wind generators and lightning protection.

Download or read book Energy and Environmental Aspects of Emerging Technologies for Smart Grid written by Surender Reddy Salkuti and published by Springer Nature. This book was released on 2024 with total page 752 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents mathematical models of various renewable energy sources (RESs) such as wind energy systems, solar PV systems, battery energy storage systems, pumped-storage hydropower, biomass, and electric vehicles (EVs). It also discusses the challenging task of the integration of high penetration of renewable energies and EVs within existing power systems. The uncertainty related to RESs, electric vehicle charging, and load demands is also modelled. The book provides illustrative and comprehensive practical case studies to enable a complete understanding of the proposed methodologies. This book will consider the nuances of all these new paradigms, smart grid components, technology, and the impact of energy storage, EVs, and distributed energy resources, in the power networks.

Download or read book Wind Driven Doubly Fed Induction Generator written by Adel Abdelbaset and published by Springer. This book was released on 2017-10-30 with total page 110 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a modified model reference adaptive system (MRAS) observer for sensorless vector control of a wind driven doubly fed induction generator (DFIG). A mathematical model of the DFIG as influenced by core loss and main flux saturation is developed. The authors describe and evaluate grid synchronization enhancement of a wind driven DFIG using adaptive sliding mode control (SMC). Besides, grid synchronization of a wind driven DFIG under unbalanced grid voltage is also fully covered in this book.

Download or read book Advanced Non Thermal Power Generation Systems written by Yatish T. Shah and published by CRC Press. This book was released on 2023-11-08 with total page 593 pages. Available in PDF, EPUB and Kindle. Book excerpt: Generally, sources for power generation are broken down into two categories: thermal and non-thermal. Thermal sources for power generation include combustion, geothermal, solar, nuclear, and waste heat, which essentially provide heat as a means for power generation. This book examines non-thermal (mechanical, electrochemical, nanoscale self-powered, and hybrid) sources of power generation and emphasizes recent advances in distributed power generation systems. Key Features Details recent advances made in wind power, including onshore, offshore, fixed and floating platform, and air wind energy systems, and offers detailed assessments of progress Covers advances in generation of hydropower, exploring dam hydropower, novel wave energy converters, and novel systems and turbines for hydrokinetic energy conversion to power Examines all types of fuel cells and their multi-functional roles, along with hybrid fuel cell systems in complete detail Explores advances in the development of self-powered nanogenerators for use in portable, wearable, and implantable power electronics Focuses on technologies with the best commercial possibilities and provides perspectives on future challenges that need to be solved This book will be of value to all researchers in academia, industry, and government interested in pursuing power generation technologies and seeking a comprehensive understanding of available and emerging non-thermal power generation sources. Readers who are interested in learning about thermal power generation sources can find it in the author’s companion text Advanced Power Generation Systems: Thermal Sources (2023).

Download or read book Advances in Mechatronics and Control Engineering written by Yun Hae Kim and published by Trans Tech Publications Ltd. This book was released on 2013-01-11 with total page 2368 pages. Available in PDF, EPUB and Kindle. Book excerpt: Selected, peer reviewed papers from the 2012 International Conference on Mechatronics and Control Engineering (ICMCE 2012), November 29-30, 2012, Guangzhou, China

Download or read book Wind Turbines written by Erich Hau and published by Springer Science & Business Media. This book was released on 2005-12-12 with total page 792 pages. Available in PDF, EPUB and Kindle. Book excerpt: Wind Turbines addresses all those professionally involved in research, development, manufacture and operation of wind turbines. It provides a cross-disciplinary overview of modern wind turbine technology and an orientation in the associated technical, economic and environmental fields. It is based on the author's experience gained over decades designing wind energy converters with a major industrial manufacturer and, more recently, in technical consulting and in the planning of large wind park installations, with special attention to economics. The second edition accounts for the emerging concerns over increasing numbers of installed wind turbines. In particular, an important new chapter has been added which deals with offshore wind utilisation. All advanced chapters have been extensively revised and in some cases considerably extended

Download or read book Emerging Trends in IoT and Computing Technologies written by Suman Lata Tripathi and published by Taylor & Francis. This book was released on 2022-10-30 with total page 724 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book includes the proceedings of the International Conference on Emerging Trends in IoT and Computing Technologies (ICEICT-2022) held at Goel Institute of Technology & Management, Lucknow, India.

Download or read book Proceedings of the 4th International Conference on Frontiers in Intelligent Computing Theory and Applications FICTA 2015 written by Swagatam Das and published by Springer. This book was released on 2015-10-24 with total page 703 pages. Available in PDF, EPUB and Kindle. Book excerpt: The proceedings of the 4th International Conference on Frontiers in Intelligent Computing: Theory and Applications 2015 (FICTA 2015) serves as the knowledge centre not only for scientists and researchers in the field of intelligent computing but also for students of post-graduate level in various engineering disciplines. The book covers a comprehensive overview of the theory, methods, applications and tools of Intelligent Computing. Researchers are now working in interdisciplinary areas and the proceedings of FICTA 2015 plays a major role to accumulate those significant works in one arena. The chapters included in the proceedings inculcates both theoretical as well as practical aspects of different areas like Nature Inspired Algorithms, Fuzzy Systems, Data Mining, Signal Processing, Image processing, Text Processing, Wireless Sensor Networks, Network Security and Cellular Automata.