Download or read book Performance Modeling and Flow Rate Optimization of Vanadium Redox Flow Batteries written by Mayank Kale and published by GRIN Verlag. This book was released on 2020-08-19 with total page 73 pages. Available in PDF, EPUB and Kindle. Book excerpt: Master's Thesis from the year 2020 in the subject Engineering - Power Engineering, grade: 9.0, Indian Institute of Technology, Bombay, language: English, abstract: There is a drastic capacity increase in the ocean, solar, and wind power based energy generation in recent years. Moreover, a larger increase is predicted in future years. Hence, we need a reliable, efficient, and cost-effective energy storage system to match up with the intermittent nature of renewable energy sources. Vanadium redox flow batteries are a promising option and are fast approaching commercialization owing to their unique characteristics like including independent scaling of power and energy density. However, there are various losses associated with the membrane, electrodes, and also due to mass transfer which limit its performance and further decrease battery capacity and efficiency. The first part of this study focusses on membrane thickness, mass transfer coefficients, electrode morphology, and current density to analyze the performance of the battery. The latter part describes the effect of flow rate on concentration overpotential, pressure losses, and pumping power to come up with an optimal variable flow rate strategy to maximize the battery capacity and system efficiency.
Download or read book Model based Design and Optimization of Vanadium Redox Flow Batteries written by Sebastian König and published by Cuvillier Verlag. This book was released on 2017-09-13 with total page 182 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this work, a holistic approach is used to develop a multi-physical model of the Vanadium Redox Flow Battery on a system level. The model is validated with experimental data from three flow battery manufacturers and is then deployed in an extensive parameter study for designing a flow battery cell. Using finite element analysis (FEA), twenty-four different cell designs are derived, which vary in electrode area and the design of the electrolyte inlet and outlet supply channels. The performance of the designs is then simulated in a single-stack and a three-stack string system. The presented model is also deployed in a flow rate optimization study. Here, a novel strategy involving the model-based optimization of operation-points defined by state-of-charge and charging or discharging current is presented and compared to conventional flow rate control strategies. Finally, a stack voltage controller is introduced, which prevents the violation of cell voltage limits as long as the pump capacity is not fully utilized.
Download or read book Energy Storage Devices written by M. Taha Demirkan and published by BoD – Books on Demand. This book was released on 2019-12-18 with total page 184 pages. Available in PDF, EPUB and Kindle. Book excerpt: Energy storage will be a very important part of the near future, and its effectiveness will be crucial for most future technologies. Energy can be stored in several different ways and these differ in terms of the type and the conversion method of the energy. Among those methods; chemical, mechanical, and thermal energy storage are some of the most favorable methods for containing energy. Current energy storage devices are still far from meeting the demands of new technological developments. Therefore, much effort has been put to improving the performance of different types of energy storage technologies in the last few decades.
Download or read book Redox Flow Batteries written by Huamin Zhang and published by CRC Press. This book was released on 2017-11-22 with total page 409 pages. Available in PDF, EPUB and Kindle. Book excerpt: Flow batteries have received attention in large-scale energy storage due to their flexible design, high safety, high energy efficiency, and environmental friendliness. In recent years, they have been rapidly developed and tested in a variety of scales that prove their feasibility and advantages of use. As energy becomes a global focus, it is important to consider flow battery systems. This book offers a detailed introduction to the function of different kinds of redox flow batteries, including vanadium flow batteries, as well as the electrochemical processes for their development, materials and components, applications, and near future prospects. Redox Flow Batteries: Fundamentals and Applications will give readers a full understanding of flow batteries from fundamentals to commercial applications.
Download or read book Batteries written by Stefano Passerini and published by John Wiley & Sons. This book was released on 2020-07-24 with total page 960 pages. Available in PDF, EPUB and Kindle. Book excerpt: Part of the Encyclopedia of Electrochemistry, this comprehensive, two-volume handbook offers an up-to-date and in-depth review of the battery technologies in use today. It also includes information on the most likely candidates that hold the potential for further enhanced energy and power densities. It contains contributions from a renowned panel of international experts in the field. Batteries are extremely commonplace in modern day life. They provide electrochemically stored energy in the form of electricity to automobiles, aircrafts, electronic devices and to smart power grids. Comprehensive in scope, 'Batteries' covers information on well-established battery technologies such as charge-carrier-based lead acid and lithium ion batteries. The contributors also explore current developments on new technologies such as lithium-sulfur and -oxygen, sodium ion, and full organic batteries. Written for electrochemists, physical chemists, and materials scientists, 'Batteries' is an accessible compendium that offers a thorough review of the most relevant current battery technologies and explores the technology in the years to come.
Download or read book Fuel Cell Fundamentals written by Ryan O'Hayre and published by John Wiley & Sons. This book was released on 2016-05-02 with total page 612 pages. Available in PDF, EPUB and Kindle. Book excerpt: A complete, up-to-date, introductory guide to fuel cell technology and application Fuel Cell Fundamentals provides a thorough introduction to the principles and practicalities behind fuel cell technology. Beginning with the underlying concepts, the discussion explores fuel cell thermodynamics, kinetics, transport, and modeling before moving into the application side with guidance on system types and design, performance, costs, and environmental impact. This new third edition has been updated with the latest technological advances and relevant calculations, and enhanced chapters on advanced fuel cell design and electrochemical and hydrogen energy systems. Worked problems, illustrations, and application examples throughout lend a real-world perspective, and end-of chapter review questions and mathematical problems reinforce the material learned. Fuel cells produce more electricity than batteries or combustion engines, with far fewer emissions. This book is the essential introduction to the technology that makes this possible, and the physical processes behind this cost-saving and environmentally friendly energy source. Understand the basic principles of fuel cell physics Compare the applications, performance, and costs of different systems Master the calculations associated with the latest fuel cell technology Learn the considerations involved in system selection and design As more and more nations turn to fuel cell commercialization amidst advancing technology and dropping deployment costs, global stationary fuel cell revenue is expected to grow from $1.4 billion to $40.0 billion by 2022. The sector is forecasted to explode, and there will be a tremendous demand for high-level qualified workers with advanced skills and knowledge of fuel cell technology. Fuel Cell Fundamentals is the essential first step toward joining the new energy revolution.
Download or read book Physicochemical Hydrodynamics written by Ronald F. Probstein and published by Butterworth-Heinemann. This book was released on 2013-10-22 with total page 368 pages. Available in PDF, EPUB and Kindle. Book excerpt: Physicochemical Hydrodynamics: An Introduction aims to provide an introduction to physicochemical hydrodynamics (PCH), which deals with the interaction between fluid flow and physical, chemical, and biochemical processes. PCH has applications in many areas of science and technology and is a rapidly expanding field. Emphasis of this book is on rational theory and its consequences, with the purpose of showing the underlying unity of PCH, in which diverse phenomena can be described in physically and mathematically similar ways. The magic of this unity is shown in the similar manner in which solutes concentrate in a flow containing chemically reacting surfaces, reverse osmosis membranes, and electrodialysis membranes or the similarity of particle motions in sedimentation, centrifugation, ultrafiltration, and electrophoresis. Problems are included at the end of each chapter and are ordered following the sequence in which the material is set out. The questions range in difficulty, with most requiring an analytic development, but with some asking only for a descriptive answer. All problems are intended to illustrate the ideas presented, though often the solution goes beyond the explicit discussion in the book, with the answer constituting a generalization or extension of the text material. This book is an essential source of information for students majoring in the field of PCH.
Download or read book Proceedings of the ICSDI 2024 Volume 2 written by Yasser Mansour and published by Springer Nature. This book was released on with total page 490 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Annual Energy Outlook 2012 with Projections To 2035 written by Energy Information Administration (U S ) and published by Government Printing Office. This book was released on 2012-10-04 with total page 256 pages. Available in PDF, EPUB and Kindle. Book excerpt: "The projections in the U.S. Energy Information Administration's (EIA's) Annual Energy Outlook 2012 (AEO2012) focus on the factors that shape the U.S. energy system over the long term. Under the assumption that current laws and regulations remain unchanged throughout the projections, the AEO2012 Reference case provides the basis for examination and discussion of energy production, consumption, technology, and market trends and the direction they may take in the future. It also serves as a starting point for analysis of potential changes in energy policies. But AEO2012 is not limited to the Reference case. It also includes 29 alternative cases (see Appendix E, Table E1), which explore important areas of uncertainty for markets, technologies, and policies in the U.S. energy economy. Many of the implications of the alternative cases are discussed in the 'Issues in focus' section of this report. / Key results highlighted in AEO2012 include continued modest growth in demand for energy over the next 25 years and increased domestic crude oil and natural gas production, largely driven by rising production from tight oil and shale resources. As a result, U.S. reliance on imported oil is reduced; domestic production of natural gas exceeds consumption, allowing for net exports; a growing share of U.S. electric power generation is met with natural gas and renewables; and energy-related carbon dioxide emissions remain below their 2005 level from 2010 to 2035, even in the absence of new Federal policies designed to mitigate greenhouse gas (GHG) emissions."--Executive Summary (p. 2).
Download or read book Advances in Batteries for Medium and Large Scale Energy Storage written by C Menictas and published by Elsevier. This book was released on 2014-12-09 with total page 635 pages. Available in PDF, EPUB and Kindle. Book excerpt: As energy produced from renewable sources is increasingly integrated into the electricity grid, interest in energy storage technologies for grid stabilisation is growing. This book reviews advances in battery technologies and applications for medium and large-scale energy storage. Chapters address advances in nickel, sodium and lithium-based batteries. Other chapters review other emerging battery technologies such as metal-air batteries and flow batteries. The final section of the book discuses design considerations and applications of batteries in remote locations and for grid-scale storage. - Reviews advances in battery technologies and applications for medium and large-scale energy storage - Examines battery types, including zing-based, lithium-air and vanadium redox flow batteries - Analyses design issues and applications of these technologies
Download or read book Life Cycle Assessment of Energy Systems and Sustainable Energy Technologies written by Riccardo Basosi and published by Springer. This book was released on 2018-12-15 with total page 187 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book deals with the application of life cycle assessment (LCA) methodology to sustainable energy systems and technologies. It reviews the state-of-the-art of the Italian experiences on the LCA applied to energy, and the most recent results from research in this field, with a particular focus on renewables, bio-energy and sustainable solutions. The contributors describe in detail the applications of LCA to various energy system topics, including: • electricity production, smart energy grids and energy storage systems;• renewable energy production from biomass;• production of biodiesel from microalgae;• environmental impacts of biomass power plants; and• geothermal energy production. These topics are supported by critical reviews and case studies, with discussions of Italian examples, demonstrating LCA’s application to various energy systems. A particular focus is placed on bio-energies and bio-energy systems, demonstrating how LCA can be used for optimal bio-energy production. This book offers an opportunity for researchers and advanced practitioners in the field of LCA to learn more about the application of LCA methodology to energy systems and technologies. It will also be of interest to students, as it enables them to understand the environmental impacts of energy systems and sustainable energy technologies, through the analysis of their life cycles.
Download or read book Nano Enhanced and Nanostructured Polymer Based Membranes for Energy Applications written by Maria Giovanna Buonomenna and published by Woodhead Publishing. This book was released on 2022-01-22 with total page 426 pages. Available in PDF, EPUB and Kindle. Book excerpt: There is a growing need for better membranes in several emerging application fields especially those related to energy conversion and storage as well as to water treatment and recycling. Processability, is an important functional property, often ignored, especially in the early discovery phase for new materials, but it should be one of the most important properties, that needs to be considered in the development of better membrane materials. Useful membrane materials have to be capable of being formed into thin membranes, in particular for membrane gas separation, water treatment and desalination, and then packaged, into large area membrane modules. All gas separation membranes that are in current commercial use are based on polymers, which are solution-processable. This book intends to deal with composite, in most cases hybrid polymer-based membranes for three separate application fields: energy conversion, energy storage and water treatment and recovery. Each chapter will explain clearly the various membrane processes then go on to discuss in detail the corresponding advanced membranes used. The logic that lies behind this is that you have to understand the process in order to develop new high-performance membranes. By taking this approach, the author aims to overcome the disconnection that currently exists between membrane materials scientists and industrial process engineers. - Discusses interdisciplinary content by a single author, approaching synthesis and development of materials from the perspective of their processability - Describes the novel aspects of membrane science that is related to energy storage, conversion and wastewater treatment - Presents an emphasis on scientific results which have an impact on real applications in terms of renewable and clean energy challenges
Download or read book Optimization of Photovoltaic Power Systems written by Djamila Rekioua and published by Springer Science & Business Media. This book was released on 2012-01-03 with total page 287 pages. Available in PDF, EPUB and Kindle. Book excerpt: Photovoltaic generation is one of the cleanest forms of energy conversion available. One of the advantages offered by solar energy is its potential to provide sustainable electricity in areas not served by the conventional power grid. Optimisation of Photovoltaic Power Systems details explicit modelling, control and optimisation of the most popular stand-alone applications such as pumping, power supply, and desalination. Each section is concluded by an example using the MATLAB® and Simulink® packages to help the reader understand and evaluate the performance of different photovoltaic systems. Optimisation of Photovoltaic Power Systems provides engineers, graduate and postgraduate students with the means to understand, assess and develop their own photovoltaic systems. As such, it is an essential tool for all those wishing to specialise in stand-alone photovoltaic systems. Optimisation of Photovoltaic Power Systems aims to enable all researchers in the field of electrical engineering to thoroughly understand the concepts of photovoltaic systems; find solutions to their problems; and choose the appropriate mathematical model for optimising photovoltaic energy.
Download or read book Energy Storage and Management for Electric Vehicles written by James Marco and published by MDPI. This book was released on 2020-01-15 with total page 238 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Special Edition of Energies on “Energy Storage and Management for Electric Vehicles” draws together a collection of research papers that critically evaluates key areas of innovation and novelty when designing and managing the high-voltage battery system within an electrified powertrain. The addressed topics include design optimisation, mathematical modelling, control engineering, thermal management, and component sizing.
Download or read book Handbook on Battery Energy Storage System written by Asian Development Bank and published by Asian Development Bank. This book was released on 2018-12-01 with total page 123 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook serves as a guide to deploying battery energy storage technologies, specifically for distributed energy resources and flexibility resources. Battery energy storage technology is the most promising, rapidly developed technology as it provides higher efficiency and ease of control. With energy transition through decarbonization and decentralization, energy storage plays a significant role to enhance grid efficiency by alleviating volatility from demand and supply. Energy storage also contributes to the grid integration of renewable energy and promotion of microgrid.
Download or read book Fuel Cell Engines written by Matthew M. Mench and published by John Wiley & Sons. This book was released on 2008-03-07 with total page 530 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fuel Cell Engines is an introduction to the fundamental principles of electrochemistry, thermodynamics, kinetics, material science and transport applied specifically to fuel cells. It covers scientific fundamentals and provides a basic understanding that enables proper technical decision-making.
Download or read book Storing Energy written by Trevor Letcher and published by Elsevier. This book was released on 2022-01-18 with total page 874 pages. Available in PDF, EPUB and Kindle. Book excerpt: Storing Energy: With Special Reference to Renewable Energy Sources, Second Edition has been fully revised and substantially extended to provide up-to-date and essential discussion that will support the needs of the world's future energy and climate change policies. New sections cover thermal energy storage, tidal storage, sustainability issues in relation to storing energy and impacts on global energy markets. Various systems are discussed, including mechanical/kinetic, thermal, electrochemical and other chemical, as well as other emerging technologies. Incorporating advancements described in the book will help the people of the world further overcome the problems related to future energy and climate change. - Covers all types of energy storage systems, allowing and encouraging comparisons to be made - Written by world experts in the field to provide the latest developments in this fast moving and vital technology - Covers the technical, environmental, social and political aspects related to the storing of energy, and in particular, renewable energy
