Download or read book Performance Evaluation of Resistance Spot Welded Interstitial Free Steel Under Cryogenic Conditions written by Gopa Banerjee and published by . This book was released on 2009 with total page 7 pages. Available in PDF, EPUB and Kindle. Book excerpt: Shear tensile (strain rate 102/s) performance of spot welded joints at cryogenic temperatures has been studied considering it as a simple method to indicate the crash resistance performance. The strength of different resistance spot welded joints of interstitial free steel under various heat input conditions has also been evaluated at room temperature for comparison. Micromechanism of fracture of the spot welded joints is investigated by scanning electron microscopy. Although an increase in shear tensile strength with decreasing test temperature is observed in all the spot welds, considerable variations in fracture mode exist in contrast to the room temperature test. The high heat input spot welds remain ductile at all test temperatures, however, low heat input welds become considerably brittle at cryogenic temperatures. Furthermore, medium heat input welds can maintain ductility until 0°C and there is loss of ductility with further lowering of test temperature.
Download or read book Issues in Teaching and Education Policy Research and Special Topics 2011 Edition written by and published by ScholarlyEditions. This book was released on 2012-01-09 with total page 735 pages. Available in PDF, EPUB and Kindle. Book excerpt: Issues in Teaching and Education Policy, Research, and Special Topics: 2011 Edition is a ScholarlyEditions™ eBook that delivers timely, authoritative, and comprehensive information about Teaching and Education Policy, Research, and Special Topics. The editors have built Issues in Teaching and Education Policy, Research, and Special Topics: 2011 Edition on the vast information databases of ScholarlyNews.™ You can expect the information about Teaching and Education Policy, Research, and Special Topics in this eBook to be deeper than what you can access anywhere else, as well as consistently reliable, authoritative, informed, and relevant. The content of Issues in Teaching and Education Policy, Research, and Special Topics: 2011 Edition has been produced by the world’s leading scientists, engineers, analysts, research institutions, and companies. All of the content is from peer-reviewed sources, and all of it is written, assembled, and edited by the editors at ScholarlyEditions™ and available exclusively from us. You now have a source you can cite with authority, confidence, and credibility. More information is available at http://www.ScholarlyEditions.com/.
Download or read book Metals Abstracts written by and published by . This book was released on 1991 with total page 948 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book High Performance Stainless Steels written by Curtis W. Kovach and published by . This book was released on 2000 with total page 96 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Resistance Welding written by Hongyan Zhang and published by CRC Press. This book was released on 2011-12-13 with total page 465 pages. Available in PDF, EPUB and Kindle. Book excerpt: Drawing on state-of-the-art research results, Resistance Welding: Fundamentals and Applications, Second Edition systematically presents fundamental aspects of important processes in resistance welding and discusses their implications on real-world welding applications. This updated edition describes progress made in resistance welding research and
Download or read book Manufacturing and Application of Stainless Steels written by Andrea Di Schino and published by MDPI. This book was released on 2020-04-15 with total page 260 pages. Available in PDF, EPUB and Kindle. Book excerpt: Stainless steels represent a quite interesting material family, both from a scientific and commercial point of view, following to their excellent combination in terms of strength and ductility together with corrosion resistance. Thanks to such properties, stainless steels have been indispensable for the technological progress during the last century and their annual consumption increased faster than other materials. They find application in all these fields requiring good corrosion resistance together with ability to be worked into complex geometries. Despite to their diffusion as a consolidated materials, many research fields are active regarding the possibility to increase stainless steels mechanical properties and corrosion resistance by grain refinement or by alloying by interstitial elements. At the same time innovations are coming from the manufacturing process of such a family of materials, also including the possibility to manufacture them starting from metals powder for 3D printing. The Special Issue scope embraces interdisciplinary work covering physical metallurgy and processes, reporting about experimental and theoretical progress concerning microstructural evolution during processing, microstructure-properties relations, applications including automotive, energy and structural.
Download or read book Polymer Microscopy written by Linda Sawyer and published by Springer Science & Business Media. This book was released on 2008-12-24 with total page 568 pages. Available in PDF, EPUB and Kindle. Book excerpt: This extensively updated and revised Third Edition is a comprehensive and practical guide to the study of the microstructure of polymers. It is the result of the authors' many years of academic and industrial experience. Introductory chapters deal with the basic concepts of both polymer morphology and processing and microscopy and imaging theory. The core of the book is more applied, with many examples of specimen preparation and image interpretation leading to materials characterization. Emerging techniques such as compositional mapping in which microscopy is combined with spectroscopy are considered. The book closes with a problem solving guide.
Download or read book Keywords Index to U S Government Technical Reports written by and published by . This book was released on 1963-08 with total page 108 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Keywords Index to U S Government Technical Reports permuted Title Index written by United States. Department of Commerce. Office of Technical Services and published by . This book was released on 1963 with total page 618 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Corrosion of Weldments written by Joseph R. Davis and published by ASM International. This book was released on 2006-01-01 with total page 228 pages. Available in PDF, EPUB and Kindle. Book excerpt: Corrosion failures of industrial components are commonly associated with welding. The reasons are many and varied. For example, welding may reduce the resistance to corrosion and environmentally assisted cracking by altering composition and microstructure, modifying mechanical properties, introducing residual stress, and creating physical defects. This book details the many forms of weld corrosion and the methods used to minimize weld corrosion. Chapters on specific alloys groups--carbon and alloy steels, stainless steels, high-nickel alloys, and nonferrous alloys--describe both general welding characteristics and the metallurgical factors that influence corrosion behavior. Corrosion problems associated with dissimilar metal weldments are also examined. Case histories document corrosion problems unique to specific industries including oil and gas, chemical processing, pulp and paper, and electric power. Special challenges caused by high-temperature environments are discussed. Commonly used methods to monitor weld corrosion and test methods for evaluation of intergranular, pitting, crevice, stress-corrosion cracking, and other forms of corrosion are also reviewed.
Download or read book Welding Engineering written by David H. Phillips and published by John Wiley & Sons. This book was released on 2016-02-16 with total page 308 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides an introduction to all of the important topics in welding engineering. It covers a broad range of subjects and presents each topic in a relatively simple, easy to understand manner, with emphasis on the fundamental engineering principles. • Comprehensive coverage of all welding engineering topics • Presented in a simple, easy to understand format • Emphasises concepts and fundamental principles
Download or read book Engineering Materials 2 written by Michael F. Ashby and published by Elsevier. This book was released on 2014-06-28 with total page 380 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides a thorough explanation of the basic properties of materials; of how these can be controlled by processing; of how materials are formed, joined and finished; and of the chain of reasoning that leads to a successful choice of material for a particular application. The materials covered are grouped into four classes: metals, ceramics, polymers and composites. Each class is studied in turn, identifying the families of materials in the class, the microstructural features, the processes or treatments used to obtain a particular structure and their design applications. The text is supplemented by practical case studies and example problems with answers, and a valuable programmed learning course on phase diagrams.
Download or read book Materials and Processes written by Barrie D. Dunn and published by Springer. This book was released on 2015-12-29 with total page 677 pages. Available in PDF, EPUB and Kindle. Book excerpt: The objective of this book is to assist scientists and engineers select the ideal material or manufacturing process for particular applications; these could cover a wide range of fields, from light-weight structures to electronic hardware. The book will help in problem solving as it also presents more than 100 case studies and failure investigations from the space sector that can, by analogy, be applied to other industries. Difficult-to-find material data is included for reference. The sciences of metallic (primarily) and organic materials presented throughout the book demonstrate how they can be applied as an integral part of spacecraft product assurance schemes, which involve quality, material and processes evaluations, and the selection of mechanical and component parts. In this successor edition, which has been revised and updated, engineering problems associated with critical spacecraft hardware and the space environment are highlighted by over 500 illustrations including micrographs and fractographs. Space hardware captured by astronauts and returned to Earth from long durations in space are examined. Information detailed in the Handbook is applicable to general terrestrial applications including consumer electronics as well as high reliability systems associated with aeronautics, medical equipment and ground transportation. This Handbook is also directed to those involved in maximizing the relia bility of new materials and processes for space technology and space engineering. It will be invaluable to engineers concerned with the construction of advanced structures or mechanical and electronic sub-systems.
Download or read book Corrosion in the Petrochemical Industry Second Edition written by and published by ASM International. This book was released on 2015-12-01 with total page 426 pages. Available in PDF, EPUB and Kindle. Book excerpt: Originally published in 1994, this second edition of Corrosion in the Petrochemical Industry collects peer-reviewed articles written by experts in the field of corrosion that were specifically chosen for this book because of their relevance to the petrochemical industry. This edition expands coverage of the different forms of corrosion, including the effects of metallurgical variables on the corrosion of several alloys. It discusses protection methods, including discussion of corrosion inhibitors and corrosion resistance of aluminum, magnesium, stainless steels, and nickels. It also includes a section devoted specifically to petroleum and petrochemical industry related issues.
Download or read book High Interstitial Stainless Austenitic Steels written by Hans Berns and published by Springer Science & Business Media. This book was released on 2012-11-08 with total page 169 pages. Available in PDF, EPUB and Kindle. Book excerpt: High Interstitial Stainless Austenitic Steels is of interest to all engineers and resaerchers working with stainless steel, either at universities or R&D departments in Industry. The new applications described appeal to design engineers while procees engineers find interesting challenges. These novel steels enter more and more industrial applications. Their development is presented by this book in its entirety, starting from the electronic scale of components. This makes it particlularly attractive to Materials Scientists and Metal Physicists.
Download or read book Mechanical Properties of Ceramics written by John B. Wachtman and published by John Wiley & Sons. This book was released on 2009-08-13 with total page 496 pages. Available in PDF, EPUB and Kindle. Book excerpt: A Comprehensive and Self-Contained Treatment of the Theory and Practical Applications of Ceramic Materials When failure occurs in ceramic materials, it is often catastrophic, instantaneous, and total. Now in its Second Edition, this important book arms readers with a thorough and accurate understanding of the causes of these failures and how to design ceramics for failure avoidance. It systematically covers: Stress and strain Types of mechanical behavior Strength of defect-free solids Linear elastic fracture mechanics Measurements of elasticity, strength, and fracture toughness Subcritical crack propagation Toughening mechanisms in ceramics Effects of microstructure on toughness and strength Cyclic fatigue of ceramics Thermal stress and thermal shock in ceramics Fractography Dislocation and plastic deformation in ceramics Creep and superplasticity of ceramics Creep rupture at high temperatures and safe life design Hardness and wear And more While maintaining the first edition's reputation for being an indispensable professional resource, this new edition has been updated with sketches, explanations, figures, tables, summaries, and problem sets to make it more student-friendly as a textbook in undergraduate and graduate courses on the mechanical properties of ceramics.
Download or read book Liquid Rocket Metal Tanks and Tank Components written by W. A. Wagner and published by . This book was released on 1974 with total page 172 pages. Available in PDF, EPUB and Kindle. Book excerpt:
