Download or read book Performance Evaluation Metrics Models and Benchmarks written by Samuel Kounev and published by Springer Science & Business Media. This book was released on 2008-06-16 with total page 331 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the thoroughly refereed proceedings of the SPEC International Performance Evaluation Workshop, SIPEW 2008, held in Darmstadt, Germany, in June 2008 . The 17 revised full papers presented were carefully selected out of 39 submissions for inclusion in the book. The papers are organized in topical sections on models for software performance engineering; benchmarks and workload characterization; Web services and service-oriented architectures; power and performance; and profiling, monitoring and optimization.
Download or read book Performance Evaluation and Benchmarking written by Lizy Kurian John and published by CRC Press. This book was released on 2018-10-03 with total page 304 pages. Available in PDF, EPUB and Kindle. Book excerpt: Computer and microprocessor architectures are advancing at an astounding pace. However, increasing demands on performance coupled with a wide variety of specialized operating environments act to slow this pace by complicating the performance evaluation process. Carefully balancing efficiency and accuracy is key to avoid slowdowns, and such a balance can be achieved with an in-depth understanding of the available evaluation methodologies. Performance Evaluation and Benchmarking outlines a variety of evaluation methods and benchmark suites, considering their strengths, weaknesses, and when each is appropriate to use. Following a general overview of important performance analysis techniques, the book surveys contemporary benchmark suites for specific areas, such as Java, embedded systems, CPUs, and Web servers. Subsequent chapters explain how to choose appropriate averages for reporting metrics and provide a detailed treatment of statistical methods, including a summary of statistics, how to apply statistical sampling for simulation, how to apply SimPoint, and a comprehensive overview of statistical simulation. The discussion then turns to benchmark subsetting methodologies and the fundamentals of analytical modeling, including queuing models and Petri nets. Three chapters devoted to hardware performance counters conclude the book. Supplying abundant illustrations, examples, and case studies, Performance Evaluation and Benchmarking offers a firm foundation in evaluation methods along with up-to-date techniques that are necessary to develop next-generation architectures.
Download or read book Performance Evaluation Metrics Models and Benchmarks written by Samuel Kounev and published by Springer. This book was released on 2009-08-29 with total page 323 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Quantitative Models for Performance Evaluation and Benchmarking written by Joe Zhu and published by Springer. This book was released on 2014-09-11 with total page 419 pages. Available in PDF, EPUB and Kindle. Book excerpt: The author is one of the prominent researchers in the field of Data Envelopment Analysis (DEA), a powerful data analysis tool that can be used in performance evaluation and benchmarking. This book is based upon the author’s years of research and teaching experiences. It is difficult to evaluate an organization’s performance when multiple performance metrics are present. The difficulties are further enhanced when the relationships among the performance metrics are complex and involve unknown tradeoffs. This book introduces Data Envelopment Analysis (DEA) as a multiple-measure performance evaluation and benchmarking tool. The focus of performance evaluation and benchmarking is shifted from characterizing performance in terms of single measures to evaluating performance as a multidimensional systems perspective. Conventional and new DEA approaches are presented and discussed using Excel spreadsheets — one of the most effective ways to analyze and evaluate decision alternatives. The user can easily develop and customize new DEA models based upon these spreadsheets. DEA models and approaches are presented to deal with performance evaluation problems in a variety of contexts. For example, a context-dependent DEA measures the relative attractiveness of similar operations/processes/products. Sensitivity analysis techniques can be easily applied, and used to identify critical performance measures. Two-stage network efficiency models can be utilized to study performance of supply chain. DEA benchmarking models extend DEA’s ability in performance evaluation. Various cross efficiency approaches are presented to provide peer evaluation scores. This book also provides an easy-to-use DEA software — DEAFrontier. This DEAFrontier is an Add-In for Microsoft® Excel and provides a custom menu of DEA approaches. This version of DEAFrontier is for use with Excel 97-2013 under Windows and can solve up to 50 DMUs, subject to the capacity of Excel Solver. It is an extremely powerful tool that can assist decision-makers in benchmarking and analyzing complex operational performance issues in manufacturing organizations as well as evaluating processes in banking, retail, franchising, health care, public services and many other industries.
Download or read book Measuring Performance and Benchmarking Project Management at the Department of Energy written by National Research Council and published by National Academies Press. This book was released on 2005-08-01 with total page 52 pages. Available in PDF, EPUB and Kindle. Book excerpt: In 1997, Congress, in the conference report, H.R. 105-271, to the FY1998 Energy and Water Development Appropriation Bill, directed the National Research Council (NRC) to carry out a series of assessments of project management at the Department of Energy (DOE). The final report in that series noted that DOE lacked an objective set of measures for assessing project management quality. The department set up a committee to develop performance measures and benchmarking procedures and asked the NRC for assistance in this effort. This report presents information and guidance for use as a first step toward development of a viable methodology to suit DOE's needs. It provides a number of possible performance measures, an analysis of the benchmarking process, and a description ways to implement the measures and benchmarking process.
Download or read book Performance Evaluation and Benchmarking written by Raghunath Nambiar and published by Springer Science & Business Media. This book was released on 2009-11-05 with total page 278 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the reviewed proceedings of the first Conference on Performance Evaluation and Benchmarking, TPCTC 2009, held in Lyon, France, August 24-28,2009. The 16 full papers and two keynote papers were carefully selected from 34 submissions. This book considers issues such as appliance, business intelligence, cloud computing, complex event processing, database performance optimizations, green computing, data compression, disaster tolerance and recovery, energy and space efficiency, hardware innovations, high speed data generation, hybrid workloads or operational data warehousing, unstructured data management, software management and maintenance, virtualization and very large memory systems
Download or read book Fog and Edge Computing written by Rajkumar Buyya and published by John Wiley & Sons. This book was released on 2019-01-04 with total page 466 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive guide to Fog and Edge applications, architectures, and technologies Recent years have seen the explosive growth of the Internet of Things (IoT): the internet-connected network of devices that includes everything from personal electronics and home appliances to automobiles and industrial machinery. Responding to the ever-increasing bandwidth demands of the IoT, Fog and Edge computing concepts have developed to collect, analyze, and process data more efficiently than traditional cloud architecture. Fog and Edge Computing: Principles and Paradigms provides a comprehensive overview of the state-of-the-art applications and architectures driving this dynamic field of computing while highlighting potential research directions and emerging technologies. Exploring topics such as developing scalable architectures, moving from closed systems to open systems, and ethical issues rising from data sensing, this timely book addresses both the challenges and opportunities that Fog and Edge computing presents. Contributions from leading IoT experts discuss federating Edge resources, middleware design issues, data management and predictive analysis, smart transportation and surveillance applications, and more. A coordinated and integrated presentation of topics helps readers gain thorough knowledge of the foundations, applications, and issues that are central to Fog and Edge computing. This valuable resource: Provides insights on transitioning from current Cloud-centric and 4G/5G wireless environments to Fog Computing Examines methods to optimize virtualized, pooled, and shared resources Identifies potential technical challenges and offers suggestions for possible solutions Discusses major components of Fog and Edge computing architectures such as middleware, interaction protocols, and autonomic management Includes access to a website portal for advanced online resources Fog and Edge Computing: Principles and Paradigms is an essential source of up-to-date information for systems architects, developers, researchers, and advanced undergraduate and graduate students in fields of computer science and engineering.
Download or read book Performance Benchmarking of Application Monitoring Frameworks written by Jan Waller and published by BoD – Books on Demand. This book was released on 2014-12-19 with total page 374 pages. Available in PDF, EPUB and Kindle. Book excerpt: Application-level monitoring of continuously operating software systems provides insights into their dynamic behavior, helping to maintain their performance and availability during runtime. Such monitoring may cause a significant runtime overhead to the monitored system, depending on the number and location of used instrumentation probes. In order to improve a system’s instrumentation and to reduce the caused monitoring overhead, it is necessary to know the performance impact of each probe. While many monitoring frameworks are claiming to have minimal impact on the performance, these claims are often not backed up with a detailed performance evaluation determining the actual cost of monitoring. Benchmarks can be used as an effective and affordable way for these evaluations. However, no benchmark specifically targeting the overhead of monitoring itself exists. Furthermore, no established benchmark engineering methodology exists that provides guidelines for the design, execution, and analysis of benchmarks. This thesis introduces a benchmark approach to measure the performance overhead of application-level monitoring frameworks. The core contributions of this approach are 1) a definition of common causes of monitoring overhead, 2) a general benchmark engineering methodology, 3) the MooBench micro-benchmark to measure and quantify causes of monitoring overhead, and 4) detailed performance evaluations of three different application-level monitoring frameworks. Extensive experiments demonstrate the feasibility and practicality of the approach and validate the benchmark results. The developed benchmark is available as open source software and the results of all experiments are available for download to facilitate further validation and replication of the results.
Download or read book Publications of the National Institute of Standards and Technology 1988 Catalog written by Rebecca J. Pardee and published by . This book was released on 1989 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Publications of the National Institute of Standards and Technology Catalog written by National Institute of Standards and Technology (U.S.) and published by . This book was released on 1988 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Performance Management written by Asbjørn Rolstadås and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 394 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book serves as a textbook for an introductory course on performance management. It gives an overview over various aspects of managing performance of the modem enterprise by focusing on performance evaluation and measurement and performance improvement techniques. Most of the material is based on a thorough literature search and an extensive reference list has been included. The book has been sponsored by the Norwegian productivity research program TOPP and by the COMETT program of the European Community Commission. It has been applied as the text for a continuing education course both within TOPP and the COMETT project APECE. It will also serve as part of a course material for a master's degree in technology management. The book is aimed at an audience of business and technology oriented personnel at middle and higher management level in manufacturing industry. At the same time it is suitable as a textbook for business and engineering schools and colleges. is organized in five parts discussing productivity and The book performance, performance planning, performance review, performance improvement and performance influencing factors. The authors have worked closely together to obtain a well coordinated text without overlap. They have provided a draft. This draft has been circulated for comments amongst the authors and amongst external experts. Based on their input the manuscript has been revised. Eivald RfI}ren and Einar Printz Moe, chairman of the board and program manager for the TOPP research program respectively, have also provided valuable input to the book.
Download or read book Quantifying and Predicting the Influence of Execution Platform on Software Component Performance written by Michael Kuperberg and published by KIT Scientific Publishing. This book was released on 2014-09 with total page 442 pages. Available in PDF, EPUB and Kindle. Book excerpt: The performance of software components depends on several factors, including the execution platform on which the software components run. To simplify cross-platform performance prediction in relocation and sizing scenarios, a novel approach is introduced in this thesis which separates the application performance profile from the platform performance profile. The approach is evaluated using transparent instrumentation of Java applications and with automated benchmarks for Java Virtual Machines.
Download or read book Quantitative Models for Performance Evaluation and Benchmarking written by Joe Zhu and published by Springer. This book was released on 2015-01-09 with total page 414 pages. Available in PDF, EPUB and Kindle. Book excerpt: The author is one of the prominent researchers in the field of Data Envelopment Analysis (DEA), a powerful data analysis tool that can be used in performance evaluation and benchmarking. This book is based upon the author’s years of research and teaching experiences. It is difficult to evaluate an organization’s performance when multiple performance metrics are present. The difficulties are further enhanced when the relationships among the performance metrics are complex and involve unknown tradeoffs. This book introduces Data Envelopment Analysis (DEA) as a multiple-measure performance evaluation and benchmarking tool. The focus of performance evaluation and benchmarking is shifted from characterizing performance in terms of single measures to evaluating performance as a multidimensional systems perspective. Conventional and new DEA approaches are presented and discussed using Excel spreadsheets — one of the most effective ways to analyze and evaluate decision alternatives. The user can easily develop and customize new DEA models based upon these spreadsheets. DEA models and approaches are presented to deal with performance evaluation problems in a variety of contexts. For example, a context-dependent DEA measures the relative attractiveness of similar operations/processes/products. Sensitivity analysis techniques can be easily applied, and used to identify critical performance measures. Two-stage network efficiency models can be utilized to study performance of supply chain. DEA benchmarking models extend DEA’s ability in performance evaluation. Various cross efficiency approaches are presented to provide peer evaluation scores. This book also provides an easy-to-use DEA software — DEAFrontier. This DEAFrontier is an Add-In for Microsoft® Excel and provides a custom menu of DEA approaches. This version of DEAFrontier is for use with Excel 97-2013 under Windows and can solve up to 50 DMUs, subject to the capacity of Excel Solver. It is an extremely powerful tool that can assist decision-makers in benchmarking and analyzing complex operational performance issues in manufacturing organizations as well as evaluating processes in banking, retail, franchising, health care, public services and many other industries.
Download or read book Performance Evaluation and Benchmarking of Intelligent Systems written by Raj Madhavan and published by Springer Science & Business Media. This book was released on 2010-04-29 with total page 351 pages. Available in PDF, EPUB and Kindle. Book excerpt: To design and develop capable, dependable, and affordable intelligent systems, their performance must be measurable. Scienti?c methodologies for standardization and benchmarking are crucial for quantitatively evaluating the performance of eme- ing robotic and intelligent systems’ technologies. There is currently no accepted standard for quantitatively measuring the performance of these systems against user-de?ned requirements; and furthermore, there is no consensus on what obj- tive evaluation procedures need to be followed to understand the performance of these systems. The lack of reproducible and repeatable test methods has precluded researchers working towards a common goal from exchanging and communic- ing results, inter-comparing system performance, and leveraging previous work that could otherwise avoid duplication and expedite technology transfer. Currently, this lack of cohesion in the community hinders progress in many domains, such as m- ufacturing, service, healthcare, and security. By providing the research community with access to standardized tools, reference data sets, and open source libraries of solutions, researchers and consumers will be able to evaluate the cost and be- ?ts associated with intelligent systems and associated technologies. In this vein, the edited book volume addresses performance evaluation and metrics for intel- gent systems, in general, while emphasizing the need and solutions for standardized methods. To the knowledge of the editors, there is not a single book on the market that is solely dedicated to the subject of performance evaluation and benchmarking of intelligent systems.
Download or read book Performance Evaluation and Benchmarking Traditional Big Data Internet of Things written by Raghunath Nambiar and published by Springer. This book was released on 2017-02-17 with total page 175 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the thoroughly refereed post-conference proceedings of the 8th TPC Technology Conference, on Performance Evaluation and Benchmarking, TPCTC 2016, held in conjunction with the 41st International Conference on Very Large Databases (VLDB 2016) in New Delhi, India, in September 2016. The 9 papers presented were carefully reviewed and selected from 20 submissions. They reflect the rapid pace at which industry experts and researchers develop innovative techniques for evaluation, measurement and characterization of complex systems.
Download or read book Publications written by United States. National Bureau of Standards and published by . This book was released on 1989 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book High Performance Computing Systems Performance Modeling Benchmarking and Simulation written by Stephen A. Jarvis and published by Springer. This book was released on 2015-04-20 with total page 284 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the thoroughly refereed proceedings of the 5th International Workshop, PMBS 2014 in New Orleans, LA, USA in November 2014. The 12 full and 2 short papers presented in this volume were carefully reviewed and selected from 53 submissions. The papers cover topics on performance benchmarking and optimization; performance analysis and prediction; and power, energy and checkpointing.
