Download or read book Performance Characterization of Integrated Statistical Process Control Systems written by Karin Kandananond and published by . This book was released on 2007 with total page 96 pages. Available in PDF, EPUB and Kindle. Book excerpt: Business competition requires organizations to increase their products0́9 quality and reduce cost at the same time. Statistical process control (SPC) techniques are important tools for monitoring process performance over time to detect special causes. Automatic process control (APC) systems, on the other hand, are utilized to regulate performance relative to a specified target. The literature indicates that combining APC and SPC systems result in integrated SPC (ISPC) systems offering an effective approach to process improvement. The objective of this research was twofold. The first objective was aimed at identifying the various process factors likely to affect the long-term performance of ISPC systems. The process considered was one of discrete parts manufacturing characterized by the integrated moving average model IMA (1, 1). A simulation model was developed to represent system performance in terms of the mean squared error (MSE) of the resulting output and the average run length (ARL) of the SPC chart utilized. Simulated results were analyzed to identify influential factors likely to affect the system performance. The second objective targeted the development of criteria for the economic performance of ISPC systems. Two mathematical cost models were developed utilizing Taguchi0́9s quadratic loss function and accounted for key characteristics of the process and system design factors. These two models were used to derive criteria for the economic selection of the SPC chart design parameters. It is hoped that the proposed criteria will help practitioners select appropriate charting alternatives to minimize the total cost of operation.
Download or read book Statistical Process Control Performance Characterization Under Field Conditions written by Mehmud Zaglul Karim and published by . This book was released on 1997 with total page 584 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Frontiers in Statistical Quality Control 13 written by Sven Knoth and published by Springer Nature. This book was released on 2021-05-15 with total page 410 pages. Available in PDF, EPUB and Kindle. Book excerpt: This contributed book focuses on major aspects of statistical quality control, shares insights into important new developments in the field, and adapts established statistical quality control methods for use in e.g. big data, network analysis and medical applications. The content is divided into two parts, the first of which mainly addresses statistical process control, also known as statistical process monitoring. In turn, the second part explores selected topics in statistical quality control, including measurement uncertainty analysis and data quality. The peer-reviewed contributions gathered here were originally presented at the 13th International Workshop on Intelligent Statistical Quality Control, ISQC 2019, held in Hong Kong on August 12-14, 2019. Taken together, they bridge the gap between theory and practice, making the book of interest to both practitioners and researchers in the field of statistical quality control.
Download or read book Statistical Process Control for the Food Industry written by Sarina A. Lim and published by John Wiley & Sons. This book was released on 2019-02-25 with total page 188 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive treatment for implementing Statistical Process Control (SPC) in the food industry This book provides managers, engineers, and practitioners with an overview of necessary and relevant tools of Statistical Process Control, a roadmap for their implementation, the importance of engagement and teamwork, SPC leadership, success factors of the readiness and implementation, and some of the key lessons learned from a number of food companies. Illustrated with numerous examples from global real-world case studies, this book demonstrates the power of various SPC tools in a comprehensive manner. The final part of the book highlights the critical challenges encountered while implementing SPC in the food industry globally. Statistical Process Control for the Food Industry: A Guide for Practitioners and Managers explores the opportunities to deliver customized SPC training programs for local food companies. It offers insightful chapter covering everything from the philosophy and fundamentals of quality control in the food industry all the way up to case studies of SPC application in the food industry on both the quality and safety aspect, making it an excellent "cookbook" for the managers in the food industry to assess and initiating the SPC application in their respective companies. Covers concise and clear guidelines for the application of SPC tools in any food companies' environment Provides appropriate guidelines showing the organizational readiness level before the food companies adopt SPC Explicitly comments on success factors, motivations, and challenges in the food industry Addresses quality and safety issues in the food industry Presents numerous, global, real-world case studies of SPC in the food industry Statistical Process Control for the Food Industry: A Guide for Practitioners and Managers can be used to train upper middle and senior managers in improving food quality and reducing food waste using SPC as one of the core techniques. It's also an excellent book for graduate students of food engineering, food quality management and/or food technology, and process management.
Download or read book Mastering Statistical Process Control written by Tim Stapenhurst and published by Routledge. This book was released on 2013-05-13 with total page 456 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mastering Statistical Process Control shows how to understand business or process performance more clearly and more effectively. This practical book is based on a rich and varied selection of case studies from across industry and commerce, including material from the manufacturing, extractive and service sectors. It will enable readers to understand how SPC can be used to maximum effect, and will deliver more effective monitoring, control and improvement in systems, processes and management. The common obstacle to successful use of SPC is getting bogged down with control charts, forgetting that visual representation of data is but a tool and not an end in itself. Mastering SPC demonstrates how statistical tools are applied and used in reality. This is a book that will open up the power of SPC for many: managers, quality professionals, engineers and analysts, as well as students, will welcome the clarity and explanation that it brings to understanding the use and benefit of SPC in a wide range of engineering, production and service situations. Key case studies include using SPC to: · Measure quality and human factors · Monitor process performance accurately over long periods · Develop best-practice benchmarks using control charts · Maximise profitability of fixed assets · Improve customer service and satisfaction
Download or read book Statistical Process Control written by Leonard A. Doty and published by Industrial Press Inc.. This book was released on 1996 with total page 396 pages. Available in PDF, EPUB and Kindle. Book excerpt: This in-depth introduction to SPC examines the technical aspects of the practices and procedures that are used to apply the quality management system in manufacturing. As in the successful first edition, the author provides a description and history of SPC along with an analysis of how it is applied to control quality costs, productivity, product improvement, and work efficiency. New to this edition are an explanation of seven basic tools, new charts, and an exploration of current trends.
Download or read book Statistical Process Control in Automated Manufacturing written by Bert Keats and published by CRC Press. This book was released on 2020-11-26 with total page 317 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides an introduction to statistical process control in automated manufacturing and suggests implementation strategies. It focuses on time series applications in statistical process control and explores the role of knowledge-based systems in process control.
Download or read book Statistical Process Monitoring and Optimization written by Geoffrey Vining and published by CRC Press. This book was released on 1999-11-24 with total page 520 pages. Available in PDF, EPUB and Kindle. Book excerpt: Demonstrates ways to track industrial processes and performance, integrating related areas such as engineering process control, statistical reasoning in TQM, robust parameter design, control charts, multivariate process monitoring, capability indices, experimental design, empirical model building, and process optimization. The book covers a range of statistical methods and emphasizes practical applications of quality control systems in manufacturing, organization and planning.
Download or read book SPC and Continuous Improvement written by Mal Owen and published by . This book was released on 1989 with total page 392 pages. Available in PDF, EPUB and Kindle. Book excerpt: Statistical process control is a type of total quality management system, in which quality control is integrated into all stages of production, rather than being the responsibility of an inspection stage. Shows how the system is applicable to more than the machine shop operations where it evolved. Does not assume prior mathematics or statistics. Written for operators and middle management as well as executives and specialists. Outlines collection, processing, and interpretation of data. Includes many graphs and sample charts. No index. Annotation copyrighted by Book News, Inc., Portland, OR
Download or read book Introduction to Statistical Process Control written by Peihua Qiu and published by CRC Press. This book was released on 2013-10-14 with total page 520 pages. Available in PDF, EPUB and Kindle. Book excerpt: A major tool for quality control and management, statistical process control (SPC) monitors sequential processes, such as production lines and Internet traffic, to ensure that they work stably and satisfactorily. Along with covering traditional methods, Introduction to Statistical Process Control describes many recent SPC methods that improve upon
Download or read book Statistical Process Adjustment for Quality Control written by Enrique del Castillo and published by Wiley-Interscience. This book was released on 2002-04-04 with total page 390 pages. Available in PDF, EPUB and Kindle. Book excerpt: Quality control is a major concern and the best method for ensuring proper quality is to establish process adjustments. This text presents statistical methods for process adjustment and their relation to the classical methods of process monitoring.
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1994 with total page 652 pages. Available in PDF, EPUB and Kindle. Book excerpt: Lists citations with abstracts for aerospace related reports obtained from world wide sources and announces documents that have recently been entered into the NASA Scientific and Technical Information Database.
Download or read book U S Government Research Reports written by and published by . This book was released on 1964 with total page 306 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Statistical Process Control written by John S Oakland and published by Routledge. This book was released on 2007-09-26 with total page 474 pages. Available in PDF, EPUB and Kindle. Book excerpt: Statistical Process Control (SPC) is a tool that measures and achieves quality control, providing managers from a wide range of industries with the ability to take appropriate actions for business success. Offering a complete instructional guide to SPC for professional quality managers and students alike, all the latest tools, techniques and philosophies behind process management and improvement are supported by the author’s extensive consulting work with thousands of organisations worldwide. Fully updated to include real-life case studies, new research based on actual client work from an array of industries, a new chapter on process capability, and integration with the latest computer methods and Minitab software, the book also retains its valued textbook quality through clear learning objectives and end of chapter discussion questions. It will serve as a textbook for both student and practicing engineers, scientists, technologists and managers and for anyone wishing to understand or implement modern statistical process control techniques.
Download or read book A Simulation Approach to Assessing the Performance Characteristics of Statistical Process Control Charts written by Kevin McCarthy and published by . This book was released on 1996 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Statistical Process Control written by Robert James Oakland and published by Routledge. This book was released on 2018-10-08 with total page 430 pages. Available in PDF, EPUB and Kindle. Book excerpt: The business, commercial and public-sector world has changed dramatically since John Oakland wrote the first edition of Statistical Process Control – a practical guide in the mid-eighties. Then people were rediscovering statistical methods of ‘quality control’ and the book responded to an often desperate need to find out about the techniques and use them on data. Pressure over time from organizations supplying directly to the consumer, typically in the automotive and high technology sectors, forced those in charge of the supplying production and service operations to think more about preventing problems than how to find and fix them. Subsequent editions retained the ‘took kit’ approach of the first but included some of the ‘philosophy’ behind the techniques and their use. The theme which runs throughout the 7th edition is still processes - that require understanding, have variation, must be properly controlled, have a capability, and need improvement - the five sections of this new edition. SPC never has been and never will be simply a ‘took kit’ and in this book the authors provide, not only the instructional guide for the tools, but communicate the management practices which have become so vital to success in organizations throughout the world. The book is supported by the authors' extensive and latest consulting work within thousands of organisations worldwide. Fully updated to include real-life case studies, new research based on client work from an array of industries, and integration with the latest computer methods and Minitab software, the book also retains its valued textbook quality through clear learning objectives and end of chapter discussion questions. It can still serve as a textbook for both student and practicing engineers, scientists, technologists, managers and for anyone wishing to understand or implement modern statistical process control techniques.
Download or read book Managing Processes Using the Process Window Monitor An Alternative Human Centered Statistical Process Control Tool written by Amanda Jean Burger and published by . This book was released on 2006 with total page 190 pages. Available in PDF, EPUB and Kindle. Book excerpt: The main thesis of this work challenges the claims made by Kelly's (2002) that present the PWM as a superior alternative to a traditional SPC X¯and R chart. Experimental testing was performed that aimed at comparing the performance of the PWM to a traditional statistical process control X¯ and R chart in a manufacturing setting. This statistical comparison was developed to analyze the process control treatments ability to influence the stress placed on an operator in relation to process control, an operators' response to significant out-of-control conditions and the human/process control system interaction for performance and human interests.
