Download or read book Coatings for Biomedical Applications written by Mike Driver and published by Elsevier. This book was released on 2012-02-22 with total page 381 pages. Available in PDF, EPUB and Kindle. Book excerpt: The biomaterials sector is rapidly expanding and significant advances have been made in the technology of biomedical coatings and materials, which provide a means to improve the wear of joints, change the biological interaction between implant and host and combine the properties of various materials to improve device performance. Coatings for biomedical applications provides an extensive review of coating types and surface modifications for biomedical applications.The first part of the book explores a range of coating types and their biomedical applications. Chapters look at hydrophilic, mineral and pyrolytic carbon coatings in and ex vivo orthopaedic applications and finally at surface modification and preparation techniques. Part two presents case studies of orthopaedic and ophthalmic coatings, and biomedical applications including vascular stents, cardiopulomonary by-pass equipment and ventricular assist devices.With its clear structure and comprehensive review of research, Coatings for biomedical applications is a valuable resource to researchers, scientists and engineers in the biomedical industry. It will also benefit anyone studying or working within the biomedical sector, particularly those specialising in biomedical coatings. - Provides an extensive review of coating types and surface modifications for biomedical applications - Chapters look at hydrophilic coatings for biomedical applications in and ex vivo, mineral coatings for orthopaedic applications, pyrolytic carbon coating and other commonly-used biomedical coatings - Presents case studies of orthopaedic and ophthalmic coatings, and biomedical applications including vascular stents, cardiopulomonary by-pass equipment and ventricular assist devices
Download or read book Surface Coatings Technology written by B. D. Sartwell and published by Elsevier. This book was released on 2016-06-03 with total page 981 pages. Available in PDF, EPUB and Kindle. Book excerpt: Surface & Coatings Technology, Volume 61 presents the proceeding of the 20th International Conference on Metallurgical Coatings and Thin Films, held in San Diego, California, on April 19–23, 1993. This book discusses a variety of topics related to surface and coatings technology, including coatings for use at high temperature, hard coatings, and vapor deposition technology. Organized into 141 chapters, this compilation of papers begins with an overview of the coating requirements for long-life bucket protection, how each of these coating systems has performed, and the advantages and disadvantages of each. This text then discusses the gradient-free transition step achieved in the element analysis of the depth profiles. Other chapters consider the metastable yttrium oxide films that are synthesized using reactive sputter deposition. This book discusses as well the use of appropriate copper-based alloy coatings on structural components. The final chapter deals with the particle mechanical and thermal behavior in the process of high velocity oxy-fuel spraying. This book is a valuable resource for chemical engineers and metallurgists.
Download or read book Techno Societal 2016 written by Prashant M. Pawar and published by Springer. This book was released on 2017-06-16 with total page 1088 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume originates from the proceedings of a multidisciplinary conference, Techno-Societal 2016 in Maharashtra, India, that brings together faculty members of various engineering colleges to solve Indian regional relevant problems under the guidance of eminent researchers from various reputed organizations. The focus is on technologies that help develop and improve society, in particular on issues such as the betterment of differently abled people, environment impact, livelihood, rural employment, agriculture, healthcare, energy, transport, sanitation, water, education. This conference aims to help innovators to share their best practices or products developed to solve specific local problems which in turn may help the other researchers to take inspiration to solve problems in their region. On the other hand, technologies proposed by expert researchers may find applications in different regions. This back and forth process for local-global interaction will help in solving local problems by global approach and help in solving global problems by improving local conditions.
Download or read book Modern Manufacturing Processes written by James A. Brown and published by Industrial Press Inc.. This book was released on 1991 with total page 258 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Recent Advances in Soft Computing and Cybernetics written by Radek Matoušek and published by Springer Nature. This book was released on 2021-02-05 with total page 314 pages. Available in PDF, EPUB and Kindle. Book excerpt: This monograph is intended for researchers and professionals in the fields of computer science and cybernetics. Nowadays, the areas of computer science and cybernetics (mainly its artificial intelligence branches) are subject to an immense degree of study and are applied in a wide range of technical and industrial projects. The individual chapters of this monograph were developed from a series of invited lectures at the Brno University of Technology in the years 2018 and 2019. The main aim of these lectures was to create an opportunity for students, academics, and professionals to exchange ideas, novel research methods, and new industrial applications in the fields related to soft computing and cybernetics. The authors of these chapters come from around the world and their works cover both new theoretical and application-oriented results from areas such as automation, control, robotics, optimization, statistics, reinforcement learning, image processing, and evolutionary algorithms.
Download or read book Proceedings of the Symposium on Interconnect and Contact Metallization written by Harzara S. Rathore and published by The Electrochemical Society. This book was released on 1998 with total page 292 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Techno Societal 2020 written by Prashant M. Pawar and published by Springer Nature. This book was released on 2021-06-19 with total page 1090 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book, divided in two volumes, originates from Techno-Societal 2020: the 3rd International Conference on Advanced Technologies for Societal Applications, Maharashtra, India, that brings together faculty members of various engineering colleges to solve Indian regional relevant problems under the guidance of eminent researchers from various reputed organizations. The focus of this volume is on technologies that help develop and improve society, in particular on issues such as advanced and sustainable technologies for manufacturing processes, environment, livelihood, rural employment, agriculture, energy, transport, sanitation, water, education. This conference aims to help innovators to share their best practices or products developed to solve specific local problems which in turn may help the other researchers to take inspiration to solve problems in their region. On the other hand, technologies proposed by expert researchers may find applications in different regions. This offers a multidisciplinary platform for researchers from a broad range of disciplines of Science, Engineering and Technology for reporting innovations at different levels.
Download or read book Coatings Tribology written by K. Holmberg and published by Elsevier. This book was released on 1994-07-15 with total page 457 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a general view on thin surface coatings used for tribological applications and it is based on the current state of understanding. The mechanisms of friction and wear in sliding and rolling contacts of coated surfaces are described. Basic information on coating techniques, tribology and surface mechanisms is given. Based on collected experimental works information is given on the properties of thin soft coatings, such as polymer, lamellar solid and soft metal coatings; thin hard coatings, such as nitride, carbide, oxide, boride and diamond and diamond-like coatings; and multi-component and multi-layer coatings. The influence of interface layers and lubricants is highlighted. The methods available for characterization of coated surfaces and for mechanical and chemical evaluation of their tribological properties are described. Tribological evaluation methods for accelerated and field testing and the need for standardization of quality assurance procedures are discussed. A methodology for the selection of thin coatings for tribological applications is presented and knowledge based expert system approaches for coating selection are reviewed. For different application examples, the basic tribological contact mechanisms are described and the possibilities for improving their tribological properties by using surface coatings are discussed. The application examples include sliding and rolling bearings, gears, tools for cutting and forming, erosion resistant applications, magnetic recording systems and bio-medical implants.
Download or read book Reactive Sputter Deposition written by Diederik Depla and published by Springer Science & Business Media. This book was released on 2008-06-24 with total page 584 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this valuable work, all aspects of the reactive magnetron sputtering process, from the discharge up to the resulting thin film growth, are described in detail, allowing the reader to understand the complete process. Hence, this book gives necessary information for those who want to start with reactive magnetron sputtering, understand and investigate the technique, control their sputtering process and tune their existing process, obtaining the desired thin films.
Download or read book TMS 2021 150th Annual Meeting Exhibition Supplemental Proceedings written by Minerals, Metals and Materials Society. Annual Meeting and published by . This book was released on 2021 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: This collection presents papers from the 150th Annual Meeting & Exhibition of The Minerals, Metals & Materials Society.
Download or read book Metallurgical Coatings and Thin Films 1993 written by and published by . This book was released on 1993 with total page 820 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Recent Advances in Materials Mechanical and Civil Engineering written by P. Nageswara Rao and published by . This book was released on 2018 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume was collected by results of the International Conference on Recent Advances in Materials, Mechanical and Civil Engineering (ICRAMMCE-2017, 1-2nd June, 2017, Hyderabad, India) and presents to readers results of recent researches and achievements in the fields of the structural materials, technologies of materials processing, building materials and technologies in the construction, applied mechanics and practice of design in the mechanical engineering. We hope that this collection will be useful for many specialists from area of mechanical engineering and construction.
Download or read book Advanced Manufacturing Technologies written by Gopal Prasad Sinha and published by Allied Publishers. This book was released on 2007 with total page 732 pages. Available in PDF, EPUB and Kindle. Book excerpt: Contributed papers presented at the conference organized by Central Mechanical Engineering Research Institute.
Download or read book Advances in Micro and Nano Manufacturing and Surface Engineering written by M. S. Shunmugam and published by Springer Nature. This book was released on 2019-11-30 with total page 720 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume presents research papers on micro and nano manufacturing and surface engineering which were presented during the 7th International and 28th All India Manufacturing Technology, Design and Research conference 2018 (AIMTDR 2018). The papers discuss the latest advances in miniature manufacturing, the machining of miniature components and features as well as improvement of surface properties. This volume will be of interest to academicians, researchers, and practicing engineers alike.
Download or read book Techno Societal 2018 written by Prashant M. Pawar and published by Springer Nature. This book was released on 2019-11-06 with total page 968 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book, divided in two volumes, originates from Techno-Societal 2018: the 2nd International Conference on Advanced Technologies for Societal Applications, Maharashtra, India, that brings together faculty members of various engineering colleges to solve Indian regional relevant problems under the guidance of eminent researchers from various reputed organizations. The focus is on technologies that help develop and improve society, in particular on issues such as the betterment of differently abled people, environment impact, livelihood, rural employment, agriculture, healthcare, energy, transport, sanitation, water, education. This conference aims to help innovators to share their best practices or products developed to solve specific local problems which in turn may help the other researchers to take inspiration to solve problems in their region. On the other hand, technologies proposed by expert researchers may find applications in different regions. This offers a multidisciplinary platform for researchers from a broad range of disciplines of Science, Engineering and Technology for reporting innovations at different levels.
Download or read book Department of the Interior and Related Agencies Appropriations for 1990 Economic Regulatory Administration written by United States. Congress. House. Committee on Appropriations. Subcommittee on Department of the Interior and Related Agencies and published by . This book was released on 1989 with total page 814 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Surface Coatings Technology written by J. P. G. Farr and published by Elsevier. This book was released on 2016-06-03 with total page 1265 pages. Available in PDF, EPUB and Kindle. Book excerpt: Surface & Coatings Technology represents the start of a new era for the journal, not only with the change in title to Surface and Coatings Technology, but also with the significant change in the journal's scope, which is intended to place it in the forefront of the coatings and surface modification field. This presents volume contains 100 contributions. It is intended to become the principal forum for the interchange of information on the science, technology, and application of coatings and modified surfaces as they relate to modification of the mechanical, chemical, or optical properties of materials. The aim of the journal is to publish research papers and invited review articles on various subjects. A new feature will be the addition of a short section at the beginning of each issue in which each author states which technical problems are being addressed in his article. These will be catalogued at the end of each year in order that a scientist or engineer who has a particular problem related to coatings can determine whether there were any papers that addressed the problem. It is hoped that Surface and Coatings Technology will have a significant impact in one of the most exciting areas of materials research being investigated today.
