Download or read book Performance and Emission Characteristics of Ci Engine with Plastic Oil written by Rajesh Guntur and published by LAP Lambert Academic Publishing. This book was released on 2012-04 with total page 92 pages. Available in PDF, EPUB and Kindle. Book excerpt: Increase in energy demands, stringent emission norms and depletion of oil resources have led the researchers to find alternative fuels for internal combustion engines. As petroleum is non renewable source of energy and the petroleum reserves are scarce nowadays, there is a need to search for alternative fuels for automobiles. The intensive search on alternative fuels for compression ignition engines has focused attention on fuels, which can be derived from bio mass. On the other hand waste plastic pose a very serious environment challenge because of their disposal problems all over the world. Plastics have now become indispensable materials in the modern world and application in the industrial field is continually increasing. An intricate detail about Pyrolysis has been discussed vividly to obtain plastic oil, which has been experimented to check the feasibility as an alternate fuel for Diesel engines.
Download or read book Fuels and Fuel Additives written by S. P. Srivastava and published by John Wiley & Sons. This book was released on 2014-01-16 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt: Examines all stages of fuel production, from feedstocks to finished products Exploring chemical structures and properties, this book sheds new light on the current science and technology of producing energy efficient and environmentally friendly fuels. Moreover, it explains the role of fuel-additives in the production cycle. This expertly written and organized guide to fuels and fuel-additives also presents requirements, rules and regulations, including US and EU standards governing automotive emissions, fuel quality and specifications, alternate fuels, biofuels, antioxidants, deposit control detergents/dispersants, stabilizers, corrosion inhibitors, and polymeric fuel-additives. Fuels and Fuel-Additives covers all stages and facets of the production of engine fuels as well as heating and fuel oils. The book begins with a quick portrait of the future of fuels and fuel production. Then, it sets forth the regulations controlling exhaust gas emissions and fuel quality from around the world. Next, the book covers: Processing of engine fuels derived from crude oil, including the production of blending components Production of alternative fuels Fuel-additives for automotive engines Blending of fuels Key properties of motor fuels and their effects on engines and the environment Aviation fuels The final chapter of the book deals with fuel oils and marine fuels. Each chapter is extensively referenced, providing a gateway to the primary and secondary literature in the field. At the end of the book, a convenient glossary defines all the key terms used in the book. Examining the full production cycle from feedstocks to final products, Fuels and Fuel-Additives is recommended for students, engineers, and scientists working in fuels and energy production.
Download or read book The Influence of Exhaust Gas Recirculation on Performance and Emission Characteristics of a Diesel Engine Using Waste Plastic Pyrolysis Oil Blends and Conventional Diesel written by Semakula Maroa and published by . This book was released on 2018 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Through an experimental study, this work focused on finding the influence of exhaust gas recirculation (EGR) on waste plastic pyrolysis oils (WPPOs) with diesel as a base comparison fuel. The results show the amount of carbon monoxide emissions seemed to decrease at low engine loads up to intermediate loads of (50%), thereafter continued to increase significantly but marginally. Among fuels tested, blend WPPOB100 reported the highest BSFC, at 0% EGR flow rate. The value was 0.4751g/kW.hr. compared with 0.7235 g/kW.hr. at 30% EGR flow rate. Increased blend ratio had a direct decrease in brake power linearly. At 30% engine load, CD, WPPOB10, WPPOB20, WPPOB30 and WPPOB40 recorded values of 2.125 kW, 2.15 kW, 2.05 kW, 1.98 kW, 1.86 kW and 1.75 kW, respectively. Exhaust gas temperature (EGT) at 30% EGR flow rate, blend WPPOB10 had the highest reduction in temperature compared with the any other WPPO blends at 320°C. Increased blend ratio and EGR percentage flow rate increased smoke emissions within the test fuels blends. At 15% EGR flow rate, the following data were recorded: 7.53%, 7.1%, 6.72%, 6.25%, 6.0% and 5.4% for CD, WWPO10, WPPO20, WPPO30, WPPO40 and WPPO100, respectively.
Download or read book Application of Clean Fuels in Combustion Engines written by Gabriele Di Blasio and published by Springer Nature. This book was released on 2022-01-04 with total page 251 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses the impact of fuels characteristics and their effects on the combustion processes in internal combustion engines. It includes the analysis of a variety of biofuels (alcohol fuels and biodiesel) and biogases (natural gas, hydrogen, etc.), providing valuable information related to consequent effects on performance and emissions. The contents focus on recent results and current trends of fuel utilization in the transport sector. State-of-the-art of clean fuels application are also discussed. Thighs book will be of interest to those in academia and industry involved in fuels, IC engines, engine instrumentation, and environmental research.
Download or read book Internal Combustion Engine Fundamentals written by John B. Heywood and published by McGraw-Hill Education. This book was released on 1988 with total page 930 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text, by a leading authority in the field, presents a fundamental and factual development of the science and engineering underlying the design of combustion engines and turbines. An extensive illustration program supports the concepts and theories discussed.
Download or read book Proceedings of the 7th International Conference on Advances in Energy Research written by Manaswita Bose and published by Springer Nature. This book was released on 2020-10-17 with total page 1639 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents selected papers from the 7th International Conference on Advances in Energy Research (ICAER 2019), providing a comprehensive coverage encompassing all fields and aspects of energy in terms of generation, storage, and distribution. Themes such as optimization of energy systems, energy efficiency, economics, management, and policy, and the interlinkages between energy and environment are included. The contents of this book will be of use to researchers and policy makers alike.
Download or read book Performance Combustion and Emission Characteristics of CI Engine Fueled with Sweet Lime Peel Oil Citrus Limetta written by G. Logesh and published by . This book was released on 2018 with total page 20 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fuels derived from biomass waste are of great interest because of their availability and renewable potential. Also, the depletion of fossil fuels and the subsequent search for new alternative fuels opened up a new arena of biomass research. Sweet lime oil (SLO), which is a waste biomass left from sweet lime fruit peel (Citrus limetta) contains flammable oil. The present work focuses on testing and promoting SLO as an alternative fuel in a diesel engine. Extracted SLO is blended with diesel in various proportions; the various test fuels used are a blend of 10 % SLO with 90 % neat diesel (denoted as SLO10), a blend of 20 % SLO with 80 % neat diesel (SLO20), a blend of 40 % SLO with 60 % neat diesel (SLO40), and 100 % SLO (SLO100). Experiments were conducted using a single-cylinder, constant speed, direct injection diesel engine at different load conditions. Outcomes were compared to conventional diesel fuel throughout the load. The results indicate that SLO100 has better results than the other test blends, with 33 % brake thermal efficiency. SLO diesel blends exhibited lower carbon monoxide and hydrocarbon emissions with comparatively higher carbon dioxide emissions with respect to neat diesel fuel. Oxides of nitrogen are higher for all SLO blends, especially SLO100, compared to neat diesel. The peak cylinder pressure for SLO100 and the peak heat-release rate for SLO10 is greater than that of other test fuels. It was concluded that SLO100 can be used in a direct injection diesel engine without any engine modifications.
Download or read book Homogeneous Charge Compression Ignition HCCI Engines written by Fuquan Zhao and published by SAE International. This book was released on 2003-01-01 with total page 658 pages. Available in PDF, EPUB and Kindle. Book excerpt: The homogeneous charge, compression-ignition (HCCI) combustion process has the potential to significantly reduce NOx and particulate emissions, while achieving high thermal efficiency and the capability of operating with a wide variety of fuels. This makes the HCCI engine an attractive technology that can ostensibly provide diesel-like fuel efficiency and very low emissions, which may allow emissions compliance to occur without relying on lean aftertreatment systems. A profound increase in the level of research and development of this technology has occurred in the last decade. This book gathers contributions from experts in both industry and academia, providing a basic introduction to the state-of-the-art of HCCI technology, a critical review of current HCCI research and development efforts, and perspective for the future. Chapters cover: Gasoline-Fueled HCCI Engines; Diesel-Fueled HCCI Engines; Alternative Fuels and Fuel Additives for HCCI Engines; HCCI Control and Operating Range Extension; Kinetics of HCCI Combustion; HCCI Engine Modeling Approaches.In addition to the extensive overview of terminology, physical processes, and future needs, each chapter also features select SAE papers (a total of 41 are included in the book), as well as a comprehensive list of references related to the subjects. Homogeneous Charge Compression Ignition (HCCI) Engines: Key Research and Development Issues provides a valuable base of information for those interested in learning about this rapidly-progressing technology which has the potential to enhance fuel economy and reduce emissions.
Download or read book Liquid Biofuels written by Krushna Prasad Shadangi and published by John Wiley & Sons. This book was released on 2021-06-29 with total page 754 pages. Available in PDF, EPUB and Kindle. Book excerpt: Compiled by a well-known expert in the field, Liquid Biofuels provides a profound knowledge to researchers about biofuel technologies, selection of raw materials, conversion of various biomass to biofuel pathways, selection of suitable methods of conversion, design of equipment, selection of operating parameters, determination of chemical kinetics, reaction mechanism, preparation of bio-catalyst: its application in bio-fuel industry and characterization techniques, use of nanotechnology in the production of biofuels from the root level to its application and many other exclusive topics for conducting research in this area. Written with the objective of offering both theoretical concepts and practical applications of those concepts, Liquid Biofuels can be both a first-time learning experience for the student facing these issues in a classroom and a valuable reference work for the veteran engineer or scientist. The description of the detailed characterization methodologies along with the precautions required during analysis are extremely important, as are the detailed description about the ultrasound assisted biodiesel production techniques, aviation biofuels and its characterization techniques, advance in algal biofuel techniques, pre-treatment of biomass for biofuel production, preparation and characterization of bio-catalyst, and various methods of optimization. The book offers a comparative study between the various liquid biofuels obtained from different methods of production and its engine performance and emission analysis so that one can get the utmost idea to find the better biofuel as an alternative fuel. Since the book covers almost all the field of liquid biofuel production techniques, it will provide advanced knowledge to the researcher for practical applications across the energy sector. A valuable reference for engineers, scientists, chemists, and students, this volume is applicable to many different fields, across many different industries, at all levels. It is a must-have for any library.
Download or read book Bioresource Utilization and Bioprocess written by Sadhan Kumar Ghosh and published by Springer Nature. This book was released on 2020-03-27 with total page 273 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on the utilization of bio-resources and their conversion pathways for a sustainable future. Tapping into bio-resources by means of thermochemical and biochemical processes has attracted researchers from all over the world; it is a broad area that has given birth to concepts like the biorefinery, as well as a new stream known as biotechnology. Its scope includes biochemical and microbiological engineering, biocatalysis and biotransformation, biosynthesis and metabolic engineering, bioprocess and biosystem engineering, bioenergy and biorefineries, cell culture and biomedical engineering, food, agricultural and marine biotechnology, bioseparation and biopurification engineering, bioremediation and environmental biotechnology, etc. The book discusses a host of new technologies now being used to tap these resources with innovative bioprocesses. All chapters are based on outstanding research papers selected for and presented at the IconSWM 2018 conference.
Download or read book Biodiesel Combustion Performance and Emissions Characteristics written by Semakula Maroa and published by Springer Nature. This book was released on 2020-07-10 with total page 152 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on biodiesel combustion, including biodiesel performance, emissions and control. It brings together a range of international research in combustion studies in order to offer a comprehensive resource for researchers, students and academics alike. The book begins with an introduction to biodiesel combustion, followed by a discussion of NOx formation routes. It then addresses biodiesel production processes and oil feedstocks in detail, discusses the physiochemical properties of biodiesel, and explores the benefits and drawbacks of these properties. Factors influencing the formation of emissions, including NOx emissions, are also dealt with thoroughly. Lastly, the book discusses the mechanisms of pollution and different approaches used to reduce pollutants in connection with biodiesel. Each approach is considered in detail, and diagrams are provided to illustrate the points in line with industry standard control mechanisms.
Download or read book Feedstock Recycling of Plastic Wastes written by Jose Aguado and published by Royal Society of Chemistry. This book was released on 2007-10-31 with total page 205 pages. Available in PDF, EPUB and Kindle. Book excerpt: The use of plastic materials has seen a massive increase in recent years, and generation of plastic wastes has grown proportionately. Recycling of these wastes to reduce landfill disposal is problematic due to the wide variation in properties and chemical composition among the different types of plastics. Feedstock recycling is one of the alternatives available for consideration, and Feedstock Recycling of Plastic Wastes looks at the conversion of plastic wastes into valuable chemicals useful as fuels or raw materials. Looking at both scientific and technical aspects of the recycling developments, this book describes the alternatives available. Areas include chemical depolymerization, thermal processes, oxidation and hydrogenation. Besides conventional treatments, new technological approaches for the degradation of plastics, such as conversion under supercritical conditions and coprocessing with coal are discussed. This book is essential reading for those involved in plastic recycling, whether from an academic or industrial perspective. Consultants and government agencies will also find it immensely useful.
Download or read book Techno Societal 2020 written by Prashant M. Pawar and published by Springer Nature. This book was released on 2021-06-19 with total page 1090 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book, divided in two volumes, originates from Techno-Societal 2020: the 3rd International Conference on Advanced Technologies for Societal Applications, Maharashtra, India, that brings together faculty members of various engineering colleges to solve Indian regional relevant problems under the guidance of eminent researchers from various reputed organizations. The focus of this volume is on technologies that help develop and improve society, in particular on issues such as advanced and sustainable technologies for manufacturing processes, environment, livelihood, rural employment, agriculture, energy, transport, sanitation, water, education. This conference aims to help innovators to share their best practices or products developed to solve specific local problems which in turn may help the other researchers to take inspiration to solve problems in their region. On the other hand, technologies proposed by expert researchers may find applications in different regions. This offers a multidisciplinary platform for researchers from a broad range of disciplines of Science, Engineering and Technology for reporting innovations at different levels.
Download or read book Diesel Engines and Biodiesel Engines Technologies written by Freddie L. Inambao and published by BoD – Books on Demand. This book was released on 2022-08-17 with total page 266 pages. Available in PDF, EPUB and Kindle. Book excerpt: Diesel Engines and Biodiesel Engines Technologies explores the conceptual and methodological approaches for the understanding of both diesel engines and biodiesel technologies. The book incorporates reviews of the most significant research findings in both diesel and biodiesel engine production and utilization. It presents technological interventions in biodiesel production and offers a foresight analysis of the perspectives of biodiesel as a future global commodity. It also examines the main challenges that biodiesel will have to overcome in order to play a key role in future energy systems. Furthermore, the book discusses alternative diesel fuels from oils and fats and proposes solutions to issues associated with biodiesel feedstocks, production issues, quality control, viscosity, stability, applications, emissions, and other environmental impacts.
Download or read book NOx Emission Control Technologies in Stationary and Automotive Internal Combustion Engines written by B. Ashok and published by Elsevier. This book was released on 2021-11-09 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt: NOx Emission Control Technologies in Stationary and Automotive Internal Combustion Engines: Approaches Toward NOx Free Automobiles presents the fundamental theory of emission formation, particularly the oxides of nitrogen (NOx) and its chemical reactions and control techniques. The book provides a simplified framework for technical literature on NOx reduction strategies in IC engines, highlighting thermodynamics, combustion science, automotive emissions and environmental pollution control. Sections cover the toxicity and roots of emissions for both SI and CI engines and the formation of various emissions such as CO, SO2, HC, NOx, soot, and PM from internal combustion engines, along with various methods of NOx formation. Topics cover the combustion process, engine design parameters, and the application of exhaust gas recirculation for NOx reduction, making this book ideal for researchers and students in automotive, mechanical, mechatronics and chemical engineering students working in the field of emission control techniques. Covers advanced and recent technologies and emerging new trends in NOx reduction for emission control Highlights the effects of exhaust gas recirculation (EGR) on engine performance parameters Discusses emission norms such as EURO VI and Bharat stage VI in reducing global air pollution due to engine emissions
Download or read book Numerical and Experimental Studies on Combustion Engines and Vehicles written by Paweł Woś and published by BoD – Books on Demand. This book was released on 2020-11-26 with total page 176 pages. Available in PDF, EPUB and Kindle. Book excerpt: The matters discussed and presented in the chapters of this book cover a wide spectrum of topics and research methods commonly used in the field of engine combustion technology and vehicle functional systems. This book contains the results of both computational analyses and experimental studies on jet and reciprocating combustion engines as well heavy-duty onroad vehicles. Special attention is devoted to research and measures toward preventing the emission of harmful exhaust components, reducing fuel consumption or using unconventional methods of engine fueling or using renewable and alternative fuels in different applications. Some technical improvements in design and control of vehicle systems are also presented.
Download or read book Environmental Sustainability of Biofuels written by Khalid Rehman Hakeem and published by Elsevier. This book was released on 2022-11-30 with total page 418 pages. Available in PDF, EPUB and Kindle. Book excerpt: Environmental Sustainability of Biofuels: Prospects and Challenges provides a comprehensive sustainability analysis of biofuels based on lifecycle analysis and develops various multi-dimensional decision-making techniques for prioritizing biofuel production technologies. Taking a transversal approach, the book combines lifecycle sustainability assessment, lifecycle assessment, lifecycle costing analysis, social lifecycle assessment, sustainability metrics, triple bottom lines, operational research methods, and supply chain designs for investigating the critical factors and critical enablers that influence the sustainable development of biofuel industry. This book will be a valuable resource for students, researchers and practitioners seeking to deepen their knowledge of biofuels as an alternative fuel. It will equip researchers and policymakers in the energy sector with the scientific methodology and metrics needed to develop strategies for a viable sustainability transition. Provides decision-making and planning tools for the bioenergy sector Focuses on the applied aspects of environmental sustainability, offering a guide to the implementation of standard and new analyses in the commercial sector Gives readers the tools to understand the implications of policy and regulation in different locations rather than providing location-specific information that is quickly out-of-date
