Download or read book Performance and Durability of High Temperature Foil Air Bearings for Oil Free Turbomachinery written by C. DellaCorte and published by . This book was released on 2000 with total page 22 pages. Available in PDF, EPUB and Kindle. Book excerpt: The performance and durability of advanced, high temperature foil air bearings are evaluated under a wide range (10-50 kPa) of loads at temperatures from 25 to 650 deg C. The bearings are made from uncoated nickel based superalloy foils. The foil surface experiences sliding contact with the shaft during initial start/stop operation. To reduce friction and wear, the solid lubricant coating, PS 304, is applied to the shaft by plasma spraying. PS304 is a NiCr based Cr2O3 coating with silver and barium fluoride/calcium fluoride solid lubricant additions. The results show that the bearings provide lives well in excess of 30,000 cycles under all of the conditions tested. Several bearings exhibited lives in excess of 100,000 cycles. Wear is a linear function of the bearing load. The excellent performance measured in this study suggests that these bearings and the PS 304 coating are well suited for advanced high temperature, oil-free turbomachinery applications.
Download or read book Performance and Durability of High Temperature Foil Air Bearing for Oil Free Turbomachinery written by National Aeronautics and Space Administration (NASA) and published by Createspace Independent Publishing Platform. This book was released on 2018-06-16 with total page 34 pages. Available in PDF, EPUB and Kindle. Book excerpt: The performance and durability of advanced, high temperature foil air bearings are evaluated under a wide range (10-50 kPa) of loads at temperatures from 25 to 650 C. The bearings are made from uncoated nickel based superalloy foils. The foil surface experiences sliding contact with the shaft during initial start/stop operation. To reduce friction and wear, the solid lubricant coating, PS304, is applied to the shaft by plasma spraying. PS304, is a NiCr based Cr2O3 coating with silver and barium fluoride/calcium fluoride solid lubricant additions. The results show that the bearings provide lives well in excess of 30,000 cycles under all of the conditions tested. Several bearings exhibited lives in excess of 100,000 cycles. Wear is a linear function of the bearing load. The excellent performance measured in this study suggests that these bearings and the PS304 coating are well suited for advanced high temperature, oil-free turbomachinery applications. DellaCorte, C. and Valco, M. J. and Radil, K. C. and Heshmat, H. Glenn Research Center NASA/TM-1999-209187, NAS 1.15:209187, E-11697
Download or read book Load Capacity Estimation of Foil Air Journal Bearings for Oil Free Turbomachinery Applications written by and published by . This book was released on 2000 with total page 22 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book 11th International Conference on Turbochargers and Turbocharging written by IMechE and published by Elsevier. This book was released on 2014-08-25 with total page 497 pages. Available in PDF, EPUB and Kindle. Book excerpt: The future market forces and environmental considerations in the passenger car and commercial vehicle sector mean more stringent engine downsizing is far more prevalent. Therefore, novel systems are required to provide boosting solutions including hybrid, electric-motor and exhaust waste energy recovery systems for high efficiency, response, reliability, durability and compactness. The current emission legislations and environmental trends for reducing CO2 and fuel consumption are the major market forces in the land and marine transport industries. The internal combustion engine is the key product and downsizing, efficiency and economy are the driving forces for development for both spark ignition (SI) and compression ignition (CI) engines in both markets. Future market forces and environmental considerations for transportation, specifically in the passenger car, commercial vehicle and the marine sectors mean more stringent engine downsizing. This international conference is the latest in the highly successful and prestigious series held regularly since 1978. These proceedings from the Institution's highly successful and prestigious series address current and novel aspects of turbocharging systems design, boosting solutions for engine downsizing and improvements in efficiency, and present the latest research and development in this growing and innovative area. - Focuses on boosting solutions including hybrid, electric-motor and exhaust waste energy recovery systems - Explores the current need for high efficiency, reliability, durability and compactness in recovery systems - Examines what new systems developments are underway
Download or read book The Effect of Journal Roughness and Foil Coatings on the Performance of Heavily Loaded Foil Air Bearings written by and published by . This book was released on 2001 with total page 30 pages. Available in PDF, EPUB and Kindle. Book excerpt: Foil air bearing load capacity tests were conducted to investigate if a solid lubricant coating applied to the surface of the bearing's top foil can function as a break-in coating. Two foil coating materials, a conventional soft polymer film (polyimide) and a hard ceramic (alumina), were independently evaluated against as-ground and worn (run-in) journals coated with NASA PS304, a high-temperature solid lubricant composite coating. The foil coatings were evaluated at journal rotational speeds of 30000 rpm and at 25 deg C. Tests were also performed on a foil bearing with a bare (uncoated) nickel-based superalloy top foil to establish a baseline for comparison. The test results indicate that the presence of a top foil solid lubricant coating is effective at increasing the load capacity performance of the foil bearing. Compared to the uncoated baseline, the addition of the soft polymer coating on the top foil increased the bearing load coefficient by 120 percent when operating against an as-ground journal surface and 85 percent against a run-in journal surface. The alumina coating increased the load coefficient by 40 percent against the as-ground journal but did not have any affect when the bearing was operated with the run-in journal. The results suggest that the addition of solid lubricant films provide added lubrication when the air film is marginal indicating that as the load capacity is approached foil air bearings transition from hydrodynamic to mixed and boundary lubrication.
Download or read book Design of an Innovative Bearing Arrangement Solution for Micro GT written by Fabrizio Stefani and published by VIDE LEAF. This book was released on 2019-11-01 with total page 68 pages. Available in PDF, EPUB and Kindle. Book excerpt: Comparative Analysis of Bearings for Micro-GT: an Innovative Arrangement FEM Design of a Cutting-Edge Support System for Micro-GT
Download or read book The effect of journal roughness and foil coatings written by and published by DIANE Publishing. This book was released on with total page 27 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book A Systems Approach to the Solid Lubrication of Foil Air Bearings for Oil Free Turbomachinery written by and published by . This book was released on 2002 with total page 22 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Research Technology 2000 written by and published by DIANE Publishing. This book was released on with total page 211 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Bearing Technology written by Pranav H. Darji and published by BoD – Books on Demand. This book was released on 2017-05-31 with total page 122 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the twenty-first century, bearings are expected to perform better in the form of various operating conditions, that is from low speed to extremely high speed and from low load to huge load applications. The expectations from the field of bearing technology are great. During the recent years, we have been witnessing the development of a new generation of mechanical systems that are highly miniaturized and very sophisticated, yet extremely robust. Technological progress creates increasingly arduous conditions for rolling mechanisms.
Download or read book Aerospace Materials Handbook written by Sam Zhang and published by CRC Press. This book was released on 2016-04-19 with total page 763 pages. Available in PDF, EPUB and Kindle. Book excerpt: Whether an airplane or a space shuttle, a flying machine requires advanced materials to provide a strong, lightweight body and a powerful engine that functions at high temperature. The Aerospace Materials Handbook examines these materials, covering traditional superalloys as well as more recently developed light alloys. Capturing state-of-the-art d
Download or read book From Prognostics and Health Systems Management to Predictive Maintenance 1 written by Rafael Gouriveau and published by John Wiley & Sons. This book was released on 2016-10-14 with total page 164 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book addresses the steps needed to monitor health assessment systems and the anticipation of their failures: choice and location of sensors, data acquisition and processing, health assessment and prediction of the duration of residual useful life. The digital revolution and mechatronics foreshadowed the advent of the 4.0 industry where equipment has the ability to communicate. The ubiquity of sensors (300,000 sensors in the new generations of aircraft) produces a flood of data requiring us to give meaning to information and leads to the need for efficient processing and a relevant interpretation. The process of traceability and capitalization of data is a key element in the context of the evolution of the maintenance towards predictive strategies.
Download or read book Journal of Tribology written by and published by . This book was released on 2006 with total page 502 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book 27th Annual Cocoa Beach Conference on Advanced Ceramics and Composites A Volume 24 Issue 3 written by Waltraud M. Kriven and published by John Wiley & Sons. This book was released on 2009-09-28 with total page 667 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume is part of the Ceramic Engineering and Science Proceeding (CESP) series. This series contains a collection of papers dealing with issues in both traditional ceramics (i.e., glass, whitewares, refractories, and porcelain enamel) and advanced ceramics. Topics covered in the area of advanced ceramic include bioceramics, nanomaterials, composites, solid oxide fuel cells, mechanical properties and structural design, advanced ceramic coatings, ceramic armor, porous ceramics, and more.
Download or read book Proceedings of the 10th International Conference on Rotor Dynamics IFToMM written by Katia Lucchesi Cavalca and published by Springer. This book was released on 2018-08-20 with total page 546 pages. Available in PDF, EPUB and Kindle. Book excerpt: IFToMM conferences have a history of success due to the various advances achieved in the field of rotor dynamics over the past three decades. These meetings have since become a leading global event, bringing together specialists from industry and academia to promote the exchange of knowledge, ideas, and information on the latest developments in the dynamics of rotating machinery. The scope of the conference is broad, including e.g. active components and vibration control, balancing, bearings, condition monitoring, dynamic analysis and stability, wind turbines and generators, electromechanical interactions in rotor dynamics and turbochargers. The proceedings are divided into four volumes. This first volume covers the following main topics: Active Components and Vibration Control; Balancing; Bearings: Fluid Film Bearings, Magnetic Bearings, Rolling Bearings and Seals; and Blades, Bladed Systems and Impellers.
Download or read book Monthly Catalog of United States Government Publications written by and published by . This book was released on 2000-07 with total page 938 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Journal of Engineering for Gas Turbines and Power written by and published by . This book was released on 2008 with total page 682 pages. Available in PDF, EPUB and Kindle. Book excerpt:
