Download or read book Perceptions of School District Curriculum Administrators Regarding K 12 Engineering Education written by Derrick A. Nero and published by . This book was released on 2018 with total page 196 pages. Available in PDF, EPUB and Kindle. Book excerpt: The state of Nebraska recently adopted and implemented a set of Science standards that aligns with the Next Generation Science Standards which include engineering practices such as engineering design and the use of technology. Curriculum administrators throughout the state are responsible for the implementation of these standards including training for engineering teaching and learning. This exploratory study investigated curriculum administrators' (n = 43) perceptions of Engineering Education in four areas: Importance of Engineering Education, District Familiarity with Engineering Education, Characteristics of Engineering, and Barriers to Integrating Engineering Education. This exploratory study used one instrument to collect data: a modified Design, Engineering, and Technology (DET) Survey. Data were analyzed using descriptive statistics. The findings of this study revealed curriculum administrators express that the Science curriculum is an effective means to deliver engineering education and that engineering education content in pre-service teacher education programs and in-service teacher professional development to foster engineering education familiarity and best practices should be improved.
Download or read book Engineering in K 12 Education written by National Research Council and published by National Academies Press. This book was released on 2009-09-08 with total page 595 pages. Available in PDF, EPUB and Kindle. Book excerpt: Engineering education in K-12 classrooms is a small but growing phenomenon that may have implications for engineering and also for the other STEM subjects-science, technology, and mathematics. Specifically, engineering education may improve student learning and achievement in science and mathematics, increase awareness of engineering and the work of engineers, boost youth interest in pursuing engineering as a career, and increase the technological literacy of all students. The teaching of STEM subjects in U.S. schools must be improved in order to retain U.S. competitiveness in the global economy and to develop a workforce with the knowledge and skills to address technical and technological issues. Engineering in K-12 Education reviews the scope and impact of engineering education today and makes several recommendations to address curriculum, policy, and funding issues. The book also analyzes a number of K-12 engineering curricula in depth and discusses what is known from the cognitive sciences about how children learn engineering-related concepts and skills. Engineering in K-12 Education will serve as a reference for science, technology, engineering, and math educators, policy makers, employers, and others concerned about the development of the country's technical workforce. The book will also prove useful to educational researchers, cognitive scientists, advocates for greater public understanding of engineering, and those working to boost technological and scientific literacy.
Download or read book Building Capacity for Teaching Engineering in K 12 Education written by National Academies of Sciences, Engineering, and Medicine and published by National Academies Press. This book was released on 2020-03-13 with total page 261 pages. Available in PDF, EPUB and Kindle. Book excerpt: Engineering education is emerging as an important component of US K-12 education. Across the country, students in classrooms and after- and out-of-school programs are participating in hands-on, problem-focused learning activities using the engineering design process. These experiences can be engaging; support learning in other areas, such as science and mathematics; and provide a window into the important role of engineering in society. As the landscape of K-12 engineering education continues to grow and evolve, educators, administrators, and policy makers should consider the capacity of the US education system to meet current and anticipated needs for K-12 teachers of engineering. Building Capacity for Teaching Engineering in K-12 Education reviews existing curricula and programs as well as related research to understand current and anticipated future needs for engineering-literate K-12 educators in the United States and determine how these needs might be addressed. Key topics in this report include the preparation of K-12 engineering educators, professional pathways for K-12 engineering educators, and the role of higher education in preparing engineering educators. This report proposes steps that stakeholders - including professional development providers, postsecondary preservice education programs, postsecondary engineering and engineering technology programs, formal and informal educator credentialing organizations, and the education and learning sciences research communities - might take to increase the number, skill level, and confidence of K-12 teachers of engineering in the United States.
Download or read book Engineering in K 12 Education written by National Research Council and published by National Academies Press. This book was released on 2009-10-08 with total page 594 pages. Available in PDF, EPUB and Kindle. Book excerpt: Engineering education in K-12 classrooms is a small but growing phenomenon that may have implications for engineering and also for the other STEM subjects-science, technology, and mathematics. Specifically, engineering education may improve student learning and achievement in science and mathematics, increase awareness of engineering and the work of engineers, boost youth interest in pursuing engineering as a career, and increase the technological literacy of all students. The teaching of STEM subjects in U.S. schools must be improved in order to retain U.S. competitiveness in the global economy and to develop a workforce with the knowledge and skills to address technical and technological issues. Engineering in K-12 Education reviews the scope and impact of engineering education today and makes several recommendations to address curriculum, policy, and funding issues. The book also analyzes a number of K-12 engineering curricula in depth and discusses what is known from the cognitive sciences about how children learn engineering-related concepts and skills. Engineering in K-12 Education will serve as a reference for science, technology, engineering, and math educators, policy makers, employers, and others concerned about the development of the country's technical workforce. The book will also prove useful to educational researchers, cognitive scientists, advocates for greater public understanding of engineering, and those working to boost technological and scientific literacy.
Download or read book Increasing the Roles and Significance of Teachers in Policymaking for K 12 Engineering Education written by National Academies of Sciences, Engineering, and Medicine and published by National Academies Press. This book was released on 2017-01-01 with total page 51 pages. Available in PDF, EPUB and Kindle. Book excerpt: Engineering is a small but growing part of Kâ€"12 education. Curricula that use the principles and practices of engineering are providing opportunities for elementary, middle, and high school students to design solutions to problems of immediate practical and societal importance. Professional development programs are showing teachers how to use engineering to engage students, to improve their learning of science, technology, engineering, and mathematics (STEM), and to spark their interest in engineering careers. However, many of the policies and practices that shape Kâ€"12 engineering education have not been fully or, in some cases, even marginally informed by the knowledge of teacher leaders. To address the lack of teacher leadership in engineering education policymaking and how it might be mitigated as engineering education becomes more widespread in Kâ€"12 education in the United States, the National Academies of Sciences, Engineering, and Medicine held a convocation on September 30â€"October 1, 2016. Participants explored how strategic connections both within and outside classrooms and schools might catalyze new avenues of teacher preparation and professional development, integrated curriculum development, and more comprehensive assessment of knowledge, skills, and attitudes about engineering in the Kâ€"12 curriculum. This publication summarizes the presentations and discussions from the event.
Download or read book Engineering Education written by Board on Engineering Education and published by National Academies. This book was released on 1995-07-14 with total page 104 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report advances the general plan for change in postsecondary engineering education of the National Academy of Sciences' Board on Engineering Education and reports on four regional symposia responding to a 1993 working paper. Chapter 1 contains the Board's message about what it proposes with the plan and the general basis for its proposals. The Board recommends that all institutions conduct institutional self-assessment, redress imbalances in the faculty incentive system, improve teaching methods and practices, ensure that the curriculum supports the institution's strategic plan, and expand beneficial interactions and outreach. A table in this section presents the key ideas contained in the report. Chapter 2 describes the Board's vision of the 21st century. Chapter 3 examines in detail engineering education as it is currently practiced and looks at areas that need improvement. Chapter 4 addresses how to make change happen. Chapter 5 is a call to action for higher education institutions as well as industry, government, professional societies, and accrediting authorities. Appendixes contain the Board's task statement, list of regional symposia and participants, contributors to the study, and an outline of the purpose and principles of a new curriculum and the means to achieve it. (Contains 47 references.) (JB)
Download or read book Journal of Engineering Education written by and published by . This book was released on 2006 with total page 386 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book A Study of the Degree of Authority of the K 12 Curriculum Director as Perceived by Specific Role Groups in Selected School Districts written by David R. De Helms and published by . This book was released on 1968 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Resources in Education written by and published by . This book was released on 2001 with total page 764 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Dissertation Abstracts International written by and published by . This book was released on 2004 with total page 620 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Research in Education written by and published by . This book was released on 1974 with total page 1262 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book STEM Road Map written by Carla C. Johnson and published by Routledge. This book was released on 2015-07-03 with total page 374 pages. Available in PDF, EPUB and Kindle. Book excerpt: STEM Road Map: A Framework for Integrated STEM Education is the first resource to offer an integrated STEM curricula encompassing the entire K-12 spectrum, with complete grade-level learning based on a spiraled approach to building conceptual understanding. A team of over thirty STEM education professionals from across the U.S. collaborated on the important work of mapping out the Common Core standards in mathematics and English/language arts, the Next Generation Science Standards performance expectations, and the Framework for 21st Century Learning into a coordinated, integrated, STEM education curriculum map. The book is structured in three main parts—Conceptualizing STEM, STEM Curriculum Maps, and Building Capacity for STEM—designed to build common understandings of integrated STEM, provide rich curriculum maps for implementing integrated STEM at the classroom level, and supports to enable systemic transformation to an integrated STEM approach. The STEM Road Map places the power into educators’ hands to implement integrated STEM learning within their classrooms without the need for extensive resources, making it a reality for all students.
Download or read book Engineering in Pre college Settings written by Şenay Purzer and published by Purdue University Press. This book was released on 2014 with total page 469 pages. Available in PDF, EPUB and Kindle. Book excerpt: In science, technology, engineering, and mathematics (STEM) education in pre-college, engineering is not the silent "e" anymore. There is an accelerated interest in teaching engineering in all grade levels. Structured engineering programs are emerging in schools as well as in out-of-school settings. Over the last ten years, the number of states in the US including engineering in their K-12 standards has tripled, and this trend will continue to grow with the adoption of the Next Generation Science Standards. The interest in pre-college engineering education stems from three different motivations. First, from a workforce pipeline or pathway perspective, researchers and practitioners are interested in understanding precursors, influential and motivational factors, and the progression of engineering thinking. Second, from a general societal perspective, technological literacy and understanding of the role of engineering and technology is becoming increasingly important for the general populace, and it is more imperative to foster this understanding from a younger age. Third, from a STEM integration and education perspective, engineering processes are used as a context to teach science and math concepts. This book addresses each of these motivations and the diverse means used to engage with them.Designed to be a source of background and inspiration for researchers and practitioners alike, this volume includes contributions on policy, synthesis studies, and research studies to catalyze and inform current efforts to improve pre-college engineering education. The book explores teacher learning and practices, as well as how student learning occurs in both formal settings, such as classrooms, and informal settings, such as homes and museums. This volume also includes chapters on assessing design and creativity.
Download or read book STEM Integration in K 12 Education written by National Research Council and published by National Academies Press. This book was released on 2014-02-28 with total page 143 pages. Available in PDF, EPUB and Kindle. Book excerpt: STEM Integration in K-12 Education examines current efforts to connect the STEM disciplines in K-12 education. This report identifies and characterizes existing approaches to integrated STEM education, both in formal and after- and out-of-school settings. The report reviews the evidence for the impact of integrated approaches on various student outcomes, and it proposes a set of priority research questions to advance the understanding of integrated STEM education. STEM Integration in K-12 Education proposes a framework to provide a common perspective and vocabulary for researchers, practitioners, and others to identify, discuss, and investigate specific integrated STEM initiatives within the K-12 education system of the United States. STEM Integration in K-12 Education makes recommendations for designers of integrated STEM experiences, assessment developers, and researchers to design and document effective integrated STEM education. This report will help to further their work and improve the chances that some forms of integrated STEM education will make a positive difference in student learning and interest and other valued outcomes.
Download or read book Current Index to Journals in Education written by and published by . This book was released on 2000 with total page 1122 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Science and Engineering for Grades 6 12 written by National Academies of Sciences, Engineering, and Medicine (U.S.). Committee on Science Investigations and Engineering Design Experiences in Grades 6-12 and published by . This book was released on 2018 with total page 290 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Students learn by doing. Science investigation and engineering design provide an opportunity for students to do. When students engage in science investigation and engineering design, they are able to engage deeply with phenomena as they ask questions, collect and analyze data, generate and utilize evidence, and develop models to support explanations and solutions. Research studies demonstrate that deeper engagement leads to stronger conceptual understandings of science content than what is demonstrated through more traditional, memorization-intensive approaches. Investigations provide the evidence student need to construct explanations for the causes of phenomena. Constructing understanding by actively engaging in investigation and design also creates meaningful and memorable learning experiences for all students. These experiences pique students' curiosity and lead to greater interest and identity in science"--Preface.
Download or read book Leadership Perceptions of STEAM Curriculum Implementation from Educational Leaders in an Elementary Setting written by Allyson June Douthit and published by . This book was released on 2021 with total page 199 pages. Available in PDF, EPUB and Kindle. Book excerpt: The purpose of this qualitative case study was to understand the perceptions of administrators toward the process of STEAM curriculum implementation using a curriculum change lens. The study centers on the qualitative data gathered through the views and experiences of principals who work toward addressing the needs of a future workforce through the STEAM method. Research questions included: (1) What are administrators' perceptions of implementing the STEAM curriculum approach to instruction within an elementary school? (2) What are characteristics of administrators who have guided STEAM curriculum implementation? Data were collected through questionnaires, interviews with individual leaders, and artifacts. The gathering such information aided in providing a clearer illustration of the thoughts of administrators implementing STEAM curriculum.
