Download or read book Pelletizing of Iron Ores written by Kurt Meyer and published by . This book was released on 1980 with total page 302 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Iron Ores and Iron Oxide Materials written by Volodymyr Shatokha and published by BoD – Books on Demand. This book was released on 2018-07-11 with total page 282 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides the multidisciplinary reading audience with a comprehensive state-of-the-art overview of research and innovations in the relationship between iron ores and iron ore materials. The book covers industrial sectors dealing with exploration and processing of iron ores as well as with advanced applications for iron ore materials and therefore entails a wide range of research fields including geology, exploration, beneficiation, agglomeration, reduction, smelting, and so on, thus encouraging life cycle thinking across the entire production chain. Iron remains the basis of modern civilization, and our sustainable future deeply depends upon our ability to satisfy the growing demand for iron and steel while decoupling hazardous emissions from economic growth. Therefore, environmental sustainability aspects are also broadly addressed. In response to socioeconomic and climatic challenges, the iron ore sector faces, this book delivers a vision for the new opportunities linked to deployment of the best available, innovative and breakthrough technologies as well as to advanced material applications.
Download or read book Characterization of Minerals Metals and Materials 2021 written by Jian Li and published by Springer Nature. This book was released on 2021-02-16 with total page 626 pages. Available in PDF, EPUB and Kindle. Book excerpt: The collection focuses on the advancements of characterization of minerals, metals, and materials and the applications of characterization results on the processing of these materials. Advanced characterization methods, techniques, and new instruments are emphasized. Areas of interest include, but are not limited to: · Novel methods and techniques for characterizing materials across a spectrum of systems and processes. · Characterization of mechanical, thermal, electrical, optical, dielectric, magnetic, physical, and other properties of materials. · Characterization of structural, morphological, and topographical natures of materials at micro- and nano- scales. · Characterization of extraction and processing including process development and analysis. · Advances in instrument developments for microstructure analysis and performance evaluation of materials, such as computer tomography (CT), X-ray and neutron diffraction, electron microscopy (SEM, FIB, TEM), and spectroscopy (EDS, WDS, EBSD) techniques. · 2D and 3D modelling for materials characterization. The book explores scientific processes to characterize materials using modern technologies, and focuses on the interrelationships and interdependence among processing, structure, properties, and performance of materials.
Download or read book Pelletizing of Iron Ores written by Kurt Meyer and published by . This book was released on 1980-01-01 with total page 302 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Blast Furnace Ironmaking written by Ian Cameron and published by Elsevier. This book was released on 2019-10-22 with total page 828 pages. Available in PDF, EPUB and Kindle. Book excerpt: Blast Furnace Ironmaking: Analysis, Control, and Optimization uses a fundamental first principles approach to prepare a blast furnace mass and energy balance in ExcelTM. Robust descriptions of the main equipment and systems, process technologies, and best practices used in a modern blast furnace plant are detailed. Optimization tools are provided to help the reader find the best blast furnace fuel mix and related costs, maximize output, or evaluate other operational strategies using the ExcelTM model that the reader will develop. The first principles blast furnace ExcelTM model allows for more comprehensive process assessments than the 'rules of thumb' currently used by the industry. This book is suitable for undergraduate and postgraduate science and engineering students in the fields of chemical, mechanical, metallurgical and materials engineering. Additionally, steel company engineers, process technologists, and management will find this book useful with its fundamental approach, best practices description, and perspective on the future. Provides sample problems, answers and assignments for each chapter Explores how to optimize the blast furnace operation while maintaining required temperatures and gas flowrates Describes all major blast furnace equipment and best practices Features blast furnace operating data from five continents
Download or read book Agglomeration of Iron Ores written by Ram Pravesh Bhagat and published by CRC Press. This book was released on 2019-07-11 with total page 529 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on agglomeration, or the size enlargement process, of iron ores. This process sits at the interface of mineral processing and extractive metallurgy. The book begins with a discussion of raw materials preparation and the beneficiation process. It then describes fundamental principles of the sintering and pelletization processes, including formation of green mix through granulation and green balls as well as chemical reactions during sintering. Finally, it offers a brief description of iron making processes and correlations related to the agglomerates: quality parameters and BF productivity and coke rate.
Download or read book Iron Ore written by Liming Lu and published by Woodhead Publishing. This book was released on 2021-12-02 with total page 842 pages. Available in PDF, EPUB and Kindle. Book excerpt: Iron Ore: Mineralogy, Processing and Environmental Sustainability, Second Edition covers all aspects surrounding the second most important commodity behind oil. As an essential input for the production of crude steel, iron ore feeds the world's largest trillion-dollar-a-year metal market and is the backbone of the global infrastructure. The book explores new ore types and the development of more efficient processes/technologies to minimize environmental footprints. This new edition includes all new case studies and technologies, along with new chapters on the chemical analysis of iron ore, thermal and dry beneficiation of iron ore, and discussions of alternative iron making technologies. In addition, information on recycling solid wastes and P-bearing slag generated in steel mills, sustainable mining, and low emission iron making technologies from regional perspectives, particularly Europe and Japan, are included. This work will be a valuable resource for anyone involved in the iron ore industry. Provides an overall view of the entire value chain, from iron ore to metal Includes specific information on process/stage/operation in the value chain Discusses challenges and developments, along with future trends in the iron ore and steel industries Incorporates new, sustainable mining techniques
Download or read book Pelletization of Fines written by Jaroslav Srb and published by Elsevier Publishing Company. This book was released on 1988 with total page 320 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Effectiveness of Organic Binders for Iron Ore Pelletization written by Larry A. Haas and published by . This book was released on 1989 with total page 32 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Pelletizing of Iron Ores written by and published by . This book was released on 1976 with total page 45 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Firing an Iron Ore Pelletizing Kiln with Low Btu Gas from Lignite written by John C. Nigro and published by . This book was released on 1982 with total page 32 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Mineral Processing Design and Operation written by Ashok Gupta and published by Elsevier. This book was released on 2006-06-26 with total page 719 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mineral Processing Design and Operations is expected to be of use to the design engineers engaged in the design and operation of mineral processing plants and including those process engineers who are engaged in flow-sheets development.Provides an orthodox statistical approach that helps in the understanding of the designing of unit processes. The subject of mineral processing has been treated on the basis of unit processes that are subsequently developed and integrated to form a complete strategy for mineral beneficiation. Unit processes of crushing, grinding, solid–liquid separation, flotation are therefore described in some detail so that a student at graduate level and operators at plants will find this book useful. Mineral Processing Design and Operations describes the strategy of mathematical modeling as a tool for more effective controlling of operations, looking at both steady state and dynamic state models. * Containing 18 chapters that have several worked out examples to clarify process operations* Filling a gap in the market by providing up-to-date research on mineral processing* Describes alternative approaches to design calculation, using example calculations and problem exercises
Download or read book Metallization of Pelletized Domestic Iron Oxide Superconcentrates with Lignite and Coal in a Rotary Kiln written by Roy Ernest Peterson and published by . This book was released on 1976 with total page 28 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Sintering From Empirical Observations to Scientific Principles written by Randall German and published by Butterworth-Heinemann. This book was released on 2014-02-07 with total page 549 pages. Available in PDF, EPUB and Kindle. Book excerpt: As sintering applications march toward a $30 billion global business, the models for sintering have progressed, but generally follow behind observation. Documentation of the steps needed to build to a quantitative and predictive theory are often missed. Sintering: From Empirical Observations to Scientific Principles partitions sintering applications and observations to show critical turning points required to establish modern sintering as a predictive science. This book, written by the most cited author in his field, is laced with people, organizations, critical steps, and important formulations in a mixture of history, personalities, and applications. Exploring how insights in seemingly unrelated fields sparked progress, it is also a teaching tool to show where there is success, where there are problems, and how to organize teams to leapfrog to new applications or plateaus of use. Randall German's Sintering: From Empirical Observations to Scientific Principles is a platform for directly addressing the critical control parameters in these new research and development efforts. Shows how the theories and understanding of sintering were developed and improved over time, and how different products were developed, ultimately leading to important knowledge and lessons for solving real sintering problems Covers all the necessary infrastructure of sintering theory and practice, such as atomic theory, surface energy, microstructure, and measurement and observation tools Introduces the history and development of such early sintered products as porcelain, tungsten lamp filaments, bronze bearings, steel automotive components, platinum crucibles and more
Download or read book Operations and Basic Processes in Steelmaking written by Luis Felipe Verdeja González and published by Springer Nature. This book was released on 2021-03-24 with total page 516 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes the operations and industrial processes related to the production of steel. The chapters cover the second part of the iron and steelmaking process, called steelmaking, presenting the stages of the process until obtaining the finished steel product in different formats for distinct applications. This book reports significant operating variables of the processes and basic operations of the steelmaking. The chapters contain numerous solved exercises conceptually supported on the thermodynamic and kinetic fundamentals of the production of steel from the pig iron in the Basic Oxygen Furnace (BOF) and the production of steel and ferroalloys in Electric Arc Furnaces (EAF). The thermal and mechanic fundamentals of the hot rolling operations and the mechanical fundamentals of the cold rolling, forming, and wire drawing to obtain different steel products are also reported. The book summarizes the strengths and uncertainties of steel as a structural material.
Download or read book Iron Ore Pellet Binders from Lignite Deposits written by M. M. Fine and published by . This book was released on 1964 with total page 26 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Recovery and Utilization of Metallurgical Solid Waste written by Yingyi Zhang and published by BoD – Books on Demand. This book was released on 2019-02-20 with total page 112 pages. Available in PDF, EPUB and Kindle. Book excerpt: At present, a lot of metallurgical solid wastes have not been timely and effectively recycled, resulting in serious problems of environmental pollution and waste of resources. As a result, large-scale comprehensive utilization technologies have been initiated, including slag dry granulation technology, steel slag cement technology, slag wool technology, slag waste heat recovery technology, etc. The comprehensive utilization of metallurgical solid waste has attracted worldwide attention. It is an effective way to improve the utilization efficiency of resources and the added value of products by using scientific metallurgical solid waste recycling methods. This book intends to provide the reader with a comprehensive overview of metallurgical solid wastes comprehensive utilization technology. The comprehensive utilization methods of four representative metallurgical solid wastes are emphatically described, such as blast furnace slag, steel slag, tailings and metallurgical dust.
