Download or read book Passive Microwave Components and Antennas written by Vitaliy Zhurbenko and published by BoD – Books on Demand. This book was released on 2010-04-01 with total page 568 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modelling and computations in electromagnetics is a quite fast-growing research area. The recent interest in this field is caused by the increased demand for designing complex microwave components, modeling electromagnetic materials, and rapid increase in computational power for calculation of complex electromagnetic problems. The first part of this book is devoted to the advances in the analysis techniques such as method of moments, finite-difference time- domain method, boundary perturbation theory, Fourier analysis, mode-matching method, and analysis based on circuit theory. These techniques are considered with regard to several challenging technological applications such as those related to electrically large devices, scattering in layered structures, photonic crystals, and artificial materials. The second part of the book deals with waveguides, transmission lines and transitions. This includes microstrip lines (MSL), slot waveguides, substrate integrated waveguides (SIW), vertical transmission lines in multilayer media as well as MSL to SIW and MSL to slot line transitions.

Download or read book Passive Microwave Components and Antennas written by Vitaliy Zhurbenko and published by IntechOpen. This book was released on 2010-04-01 with total page 566 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modelling and computations in electromagnetics is a quite fast-growing research area. The recent interest in this field is caused by the increased demand for designing complex microwave components, modeling electromagnetic materials, and rapid increase in computational power for calculation of complex electromagnetic problems. The first part of this book is devoted to the advances in the analysis techniques such as method of moments, finite-difference time- domain method, boundary perturbation theory, Fourier analysis, mode-matching method, and analysis based on circuit theory. These techniques are considered with regard to several challenging technological applications such as those related to electrically large devices, scattering in layered structures, photonic crystals, and artificial materials. The second part of the book deals with waveguides, transmission lines and transitions. This includes microstrip lines (MSL), slot waveguides, substrate integrated waveguides (SIW), vertical transmission lines in multilayer media as well as MSL to SIW and MSL to slot line transitions.

Download or read book Ridge Waveguides and Passive Microwave Components written by J. Helszajn and published by IET. This book was released on 2000-06-30 with total page 342 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book collects much of Helszajn's work (formerly, Heriot-Watt University) and includes closed-form and finite element calculations of the propagation constant, attenuation and mode spectrum for the ridge waveguide, and power-current and power-voltage definitions of impedance. Circular polarization is also treated. Propagation properties where the waveguide has a dielectric filler are calculated. The treatment is then extended to more complex designs, including quadruple ridge waveguides with and without a gyromagnetic filler. The text includes descriptions of many of the passive devices which can be realized using these waveguides, including isolators, phase shifters, and circulators. c. Book News Inc.

Download or read book Introduction to RF and Microwave Passive Components written by Richard Wallace and published by Artech House. This book was released on 2015-08-01 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: This authoritative new resource provides an overview and introduction to working with RF, microwave, and high frequency components. From transmission lines, antennas, millimeter waves, ferrites, hybrids, power dividers and filters, this book focuses on practical, time-to-market issues to help with projects in the field. Keeping mathematics to a minimum, this comprehensive volume is packed with over 700 illustrations that help clarify key concepts. The reader will gain an in-depth understanding of the special characteristics exploited in microwave and high frequency design. The book is also used in industrial training courses.

Download or read book Asymmetric Passive Components in Microwave Integrated Circuits written by Hee-Ran Ahn and published by John Wiley & Sons. This book was released on 2006-09-01 with total page 308 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book examines the new and important technology of asymmetric passive components for miniaturized microwave passive circuits. The asymmetric design methods and ideas set forth by the author are groundbreaking and have not been treated in previous works. Readers discover how these design methods reduce the circuit size of microwave integrated circuits and are also critical to reducing the cost of equipment such as cellular phones, radars, antennas, automobiles, and robots. An introductory chapter on the history of asymmetric passive components, which began with asymmetric ring hybrids first described by the author, sets the background for the book. It lays a solid foundation with a chapter examining microwave circuit parameters such as scattering, ABCD, impedance, admittance, and image. A valuable feature of this chapter is a conversion table between the various circuit matrices characterizing two-port networks terminated in arbitrary impedances. The correct conversion has also never been treated in previous works. Next, the author sets forth a thorough treatment of asymmetric passive component design, which covers the basic and indispensable elements for integration with other active or passive devices, including: * Asymmetric ring hybrids * Asymmetric branch-line hybrids * Asymmetric three-port power dividers and N-way power dividers * Asymmetric ring hybrid phase shifters and attenuators * Asymmetric ring filters and asymmetric impedance transformers With its focus on the principles of circuit element design, this is a must-have graduate-level textbook for students in microwave engineering, as well as a reference for design engineers who want to learn the new and powerful design method for asymmetric passive components.

Download or read book Microwaves Introduction To Circuits Devices And Antennas written by M. L. Sisodia and published by New Age International. This book was released on 2007 with total page 616 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Book Is Intended As An Introductory Text On Microwave Circuits, Devices And Antennas. It Can Be Used Not Only By The Students Of Physics And Engineering At The Graduate And The Postgraduate Levels, But Also By Practising Engineers, Technicians And Research Workers In The Area Of Microwaves. It Contains Comprehensive Up-To-Date Text For A Standard Course On Transmission Lines, Guided Waves, Passive Components (Including Ferrite Devices), Periodic Structures And Filters, Microwave Vacuum Tubes, Solid State Devices And Their Applications, Strip-Lines, Mics And Antennas. It Also Includes Microwave Measurements At Length. The Written Text Is Supplemented With A Large Number Of Suitable Diagrams And A Good Number Of Solved Examples For Reinforcing The Key Aspects. Each Chapter Has A Select Bibliography/References And Good Number Of Problems And Review Questions At The End.

Download or read book Handbook of Microwave and Optical Components Microwave solid state components written by Kai Chang and published by . This book was released on 1989 with total page 664 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Passive RF and Microwave Integrated Circuits written by Leo Maloratsky and published by Elsevier. This book was released on 2003-12-01 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt: The growth in RF and wireless/mobile computing devices that operate at microwave frequencies has resulted in explosive demand for integrated circuits capable of operating at such frequencies in order to accomplish functions like frequency division, phase shifting, attenuation, and isolators and circulators for antennas. This book is an introduction to such ICs, combining theory and practical applications of those devices. In addition to this combined theory and application approach, the author discusses the critical importance of differing fabrication materials on the performance of ICs at different frequencies. This is an area often overlooked when choosing ICs for RF and microwave applications, yet it can be a crucial factor in how an IC performs in a given application. Gives reader a solid background in an increasingly important area of circuit design Emphasis on combination of theoretical discussions with practical application examples In-depth discussion of critical, but often overlooked topic of different fabrication material performances at varying frequencies

Download or read book Microwave Devices Circuits and Subsystems for Communications Engineering written by Ian A. Glover and published by John Wiley & Sons. This book was released on 2006-05-01 with total page 550 pages. Available in PDF, EPUB and Kindle. Book excerpt: Microwave Devices, Circuits and Subsystems for Communications Engineering provides a detailed treatment of the common microwave elements found in modern microwave communications systems. The treatment is thorough without being unnecessarily mathematical. The emphasis is on acquiring a conceptual understanding of the techniques and technologies discussed and the practical design criteria required to apply these in real engineering situations. Key topics addressed include: Microwave diode and transistor equivalent circuits Microwave transmission line technologies and microstrip design Network methods and s-parameter measurements Smith chart and related design techniques Broadband and low-noise amplifier design Mixer theory and design Microwave filter design Oscillators, synthesisers and phase locked loops Each chapter is written by specialists in their field and the whole is edited by experience authors whose expertise spans the fields of communications systems engineering and microwave circuit design. Microwave Devices, Circuits and Subsystems for Communications Engineering is suitable for senior electrical, electronic or telecommunications engineering undergraduate students, first year postgraduate students and experienced engineers seeking a conversion or refresher text. Includes a companion website featuring: Solutions to selected problems Electronic versions of the figures Sample chapter

Download or read book Advanced Microwave Circuits and Systems written by Vitaliy Zhurbenko and published by BoD – Books on Demand. This book was released on 2010-04-01 with total page 502 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is based on recent research work conducted by the authors dealing with the design and development of active and passive microwave components, integrated circuits and systems. It is divided into seven parts. In the first part comprising the first two chapters, alternative concepts and equations for multiport network analysis and characterization are provided. A thru-only de-embedding technique for accurate on-wafer characterization is introduced. The second part of the book corresponds to the analysis and design of ultra-wideband low- noise amplifiers (LNA).

Download or read book RF and Microwave Passive and Active Technologies written by Mike Golio and published by CRC Press. This book was released on 2018-10-03 with total page 736 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the high frequency world, the passive technologies required to realize RF and microwave functionality present distinctive challenges. SAW filters, dielectric resonators, MEMS, and waveguide do not have counterparts in the low frequency or digital environment. Even when conventional lumped components can be used in high frequency applications, their behavior does not resemble that observed at lower frequencies. RF and Microwave Passive and Active Technologies provides detailed information about a wide range of component technologies used in modern RF and microwave systems. Updated chapters include new material on such technologies as MEMS, device packaging, surface acoustic wave (SAW) filters, bipolar junction and heterojunction transistors, and high mobility electron transistors (HMETs). The book also features a completely rewritten section on wide bandgap transistors.

Download or read book Planar Microwave Engineering written by Thomas H. Lee and published by Cambridge University Press. This book was released on 2004-08-30 with total page 868 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modern wireless communications hardware is underpinned by RF and microwave design techniques. This insightful book contains a wealth of circuit layouts, design tips, and practical measurement techniques for building and testing practical gigahertz systems. The book covers everything you need to know to design, build, and test a high-frequency circuit. Microstrip components are discussed, including tricks for extracting good performance from cheap materials. Connectors and cables are also described, as are discrete passive components, antennas, low-noise amplifiers, oscillators, and frequency synthesizers. Practical measurement techniques are presented in detail, including the use of network analyzers, sampling oscilloscopes, spectrum analyzers, and noise figure meters. Throughout the focus is practical, and many worked examples and design projects are included. There is also a CD-ROM that contains a variety of design and analysis programs. The book is packed with indispensable information for students taking courses on RF or microwave circuits and for practising engineers.

Download or read book Passive Microwave Device Applications of High Temperature Superconductors written by M. J. Lancaster and published by Cambridge University Press. This book was released on 2006-12-14 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes the application of new high temperature superconducting materials to microwave devices and systems. It deals with the fundamentals of the interaction between microwaves and superconductors, and includes a basic description of how microwave devices can be constructed using these materials. Since the discovery of high temperature superconductors in 1986 there has been an enormous effort worldwide to develop and characterize these materials. Work on applications has proceeded more slowly however. Nevertheless, commercial applications are now beginning to arise, including use in passive microwave devices. The author carefully describes the advantages of using high temperature superconductors in these devices, enabling scientists and engineers to form a complete understanding of the subject. The rest of the book is devoted to examples of superconducting microwave filters, antennas and systems. The examples chosen relate not only to what can be achieved at present, but indicate the trends for future research and what may be expected for superconducting devices in the future. The book will appeal to researchers in electrical and electronic engineering.

Download or read book Principles of RF and Microwave Design written by Matthew A. Morgan and published by Artech House. This book was released on 2019-11-30 with total page 712 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive resource provides a thorough introduction to the principles of electronic circuits operating in the radio, microwave, and millimeter-wave frequency ranges. The book highlights the fundamental physical laws of classical electromagnetics using a foundation of Maxwell’s equations to give insight into the operating principles of circuit elements of all kinds, from lumped elements to transmission lines, waveguides, optical fibers, and quasi-optical structures. Standard passive system components like filters, splitters, couplers, hybrids, baluns, and antennas are explained to acclimate the reader to considering multiple technological solutions for common design problems. A basic overview of active circuit designs, such as amplifiers, mixers, and multipliers is also provided, along with discussion of the performance characteristics of electronic systems, including noise and linearity. Emphasis is placed on visualization and understanding of how and why electronic circuits of all frequencies are built and operate the way they do. Readers learn how to match an amplifier for optimum noise performance over the broadest bandwidth with the fewest number of elements and how to visualize the coupling of various modes in a mixed waveguide-type structure and avoid resonances due to trapped, higher-order modes. The book provides the tools needed to design and optimize a launcher from microstrip into waveguide, and whether the best characteristics can be achieved by incorporating matching elements in the microstrip section, the waveguide section, or both. Packed with references and examples, readers learn not only how to do the math but what the math means.

Download or read book Fundamentals of RF and Microwave Techniques and Technologies written by Hans L. Hartnagel and published by Springer Nature. This book was released on 2023-07-28 with total page 1554 pages. Available in PDF, EPUB and Kindle. Book excerpt: The increase of consumer, medical and sensors electronics using radio frequency (RF) and microwave (MW) circuits has implications on overall performances if design is not robust and optimized for a given applications. The current and later generation communication systems and Internet of Thing (IoT) demand for robust electronic circuits with optimized performance and functionality, but low cost, size, and power consumption. As a result, there is a need for a textbook that provides a comprehensive treatment of the subject. This book provides state-of-the-art coverage of RF and Microwave Techniques and Technologies, covers important topics: transmission-line theory, passive and semiconductor devices, active and passive microwave circuits and receiver systems, as well as antennas, noise and digital signal modulation schemes. With an emphasis on theory, design, and applications, this book is targeted to students, teachers, scientists, and practicing design engineers who are interested in broadening their knowledge of RF and microwave electronic circuit design. Readers will also benefit from a unique integration of theory and practice, provides the readers a solid understanding of the RF and microwave concepts, active and passive components, antenna, and modulation schemes. Readers will learn to solve common design problems ranging from selection of components, matching networks to biasing and stability, and digital modulation techniques. More importantly, it provides basic understanding in the analysis and design of RF and microwave circuits in a manner that is practiced in industry. This make sure that the know-how learned in this book can be effortlessly and straightway put into practice without any obstacles.

Download or read book Next Generation Wireless Terahertz Communication Networks written by Saim Ghafoor and published by CRC Press. This book was released on 2021-08-10 with total page 530 pages. Available in PDF, EPUB and Kindle. Book excerpt: The rapid growth of the data traffic demands new ways to achieve high-speed wireless links. The backbone networks, data centers, mission-critical applications, as well as end-users sitting in office or home, all require ultra-high throughput and ultra-low latency wireless links. Sophisticated technological advancement and huge bandwidth are required to reduce the latency. Terahertz band, in this regard, has a huge potential to provide these high-capacity links where a user can download the file in a few seconds. To realize the high-capacity wireless links for future applications, in this book, different aspects of the Terahertz band wireless communication network are presented. This book highlights the Terahertz channel characteristics and modeling, antenna design and beamforming, device characterization, applications, and protocols. It also provides state-of-the-art knowledge on different communication aspects of Terahertz communication and techniques to realize the true potential of the Terahertz band for wireless communication.

Download or read book Non Volatile CBRAM MIM Switching Technology for Electronically Reconfigurable Passive Microwave Devices written by Jayakrishnan M. Purushothama and published by John Wiley & Sons. This book was released on 2022-03-08 with total page 226 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the applications of non-volatile CBRAM/MIM switching technology for electronically reconfigurable passive RF and microwave devices, together with theory and methods for application in rewritable chipless RFID tags. Conductive Bridging Random Access Memory (CBRAM) is a renowned and commercially used non-volatile memory concept. Having evolved over the past few decades, it is currently identified as an efficient non-volatile RF switching technology. This book presents recent research on this topic, focusing on the development of a new generation of low-cost non-volatile RF switches and their applications, demonstrating both high performance and flexibility of implementation. It includes the experimental realization of various prototypes of RF and microwave devices utilizing this technology, along with relevant analysis of mathematical and electrical models, and detailed discussions of future aspects. All devices presented are compatible with mass industrial production at an economically efficient budget through optimized fabrication steps, without the requirement of sophisticated “clean room” processes among them.