Download or read book Influence of Chromium and Molybdenum on the Corrosion of Nickel Based Alloys written by and published by . This book was released on 2005 with total page 29 pages. Available in PDF, EPUB and Kindle. Book excerpt: The addition of chromium and molybdenum to nickel creates alloys with exceptional corrosion resistance in a diverse range of environments. This study examines the complementary roles of Cr and Mo in Ni alloy passivation. Four nickel alloys with varying amounts of chromium and molybdenum were studied in 1 molar salt solutions over a broad pH range. The passive corrosion and breakdown behavior of the alloys suggests that chromium is the primary element influencing general corrosion resistance. The breakdown potential was nearly independent of molybdenum content, while the repassivation potential is strongly dependant on the molybdenum content. This indicates that chromium plays a strong role in maintaining the passivity of the alloy, while molybdenum acts to stabilize the passive film after a localized breakdown event.
Download or read book Passivity of Metals and Semiconductors written by Michel Froment and published by Elsevier. This book was released on 2013-09-03 with total page 784 pages. Available in PDF, EPUB and Kindle. Book excerpt: Passivity of Metals and Semiconductors covers the proceedings of the Fifth International Symposium on Passivity, held in Bombannes, France on May30 - June3, 1983. The said symposium is concerned with passivity of metallic materials, localized corrosion, experimental techniques, and classical techniques such as optical techniques and electron spectroscopy. The book is divided into five sections. Section I deals with the concepts involved in the composition-transport phenomena and covers topics such as the transport of oxygen and water in oxide layers; the kinetics of oxidation of silicon; and the oxidation rate laws of metals that form nonstoichiometric oxides. Section II covers related techniques and their specific applications such as study of passivity of iron by in situ methods; optical methods in the study of passive films; and the analysis of multiple layer surface films by modulated reflection spectroscopy. Section III tackles amorphous metals - their passivity, their depassivation and repassivation in localized corrosion, and a comparison of models for localized breakdown of passivity. Part IV discusses the photoelectrochemistry of semiconductors; Part V tackles passivation and localized corrosion of stainless steels. The text is recommended for organic chemists, metallurgists, and engineers who would like to know more about the passivity of metals and their applications in different fields.
Download or read book Corrosion of Nickel and Nickel base Alloys written by Wayne Z. Friend and published by John Wiley & Sons. This book was released on 1980 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Passivity of Metals written by Robert Peter Frankenthal and published by . This book was released on 1978 with total page 1112 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Passivity of Metals written by Robert Peter Frankenthal and published by . This book was released on 1978 with total page 1104 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Passivity and Localized Corrosion of Nickel based Alloys written by Iuan-Jou Yang and published by . This book was released on 1988 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Corrosion Resistance of Nickel and Nickel Alloys Against Acids and Lyes written by Michael Schütze and published by John Wiley & Sons. This book was released on 2015-01-27 with total page 363 pages. Available in PDF, EPUB and Kindle. Book excerpt: Derived from the online reference "Corrosion Handbook", this handbook brings together all the relevant information on corrosion protection and prevention for nickel-based materials, all in a convenient and easy-to-use format. As such, it provides scientists and engineers manufacturing and utilizing these materials with comprehensive information, including tabulated data and references, on their corrosion behavior when in contact with acids and hydroxides.
Download or read book Nickel and Its Alloys written by Samuel Jacob Rosenberg and published by . This book was released on 1968 with total page 164 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Localized Corrosion written by Fumio Hine and published by . This book was released on 1988 with total page 248 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Passivity and Localized Corrosion written by Masahiro Seo and published by The Electrochemical Society. This book was released on 1999 with total page 762 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Passivity and Protection of Metals Against Corrosion written by N. D. Tomashov and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 182 pages. Available in PDF, EPUB and Kindle. Book excerpt: Considerable progress has been made in the past 20 years toward understanding the basic mechanisms of corrosion, and the application of this knowledge to its control. From the very beginning, educational institutions and industrial research laboratories have contributed greatly toward determining and elucidating the fundamental principles of corrosion reactions. Some of the basic principles involved in cor rosion of metals can be credited to early investigators. Michael Faraday in 1830-1840 studied the relationship between the quantity of a metal dissolved and the electric current which was produced by this reaction. He also proposed that the passivation of iron was through the formation of a film and that the dissolution of a metal was electro chemical in nature. Sir Humphrey Davy in 1824 worked out the funda mentals of galvanic corrosion of ships' hulls and applied sacrificial zinc anodes to protect them from sea water corrosion. Richard Arlie in 1847 demonstrated that corrosion produced by oxygen at the surface of iron in a flowing stream generated a current. With the fundamental knowledge available to him from these early investigators, Willis Rodney Whitney developed and expressed, in its most useful form, one of the basic scientific principles which provides modern corrosion specialists with a fundamental basis of corrosion control. Dr. Whitney concluded that corrosion of iron is electrochemical, and that the rate is simply a function of the electromotive force and resistance of the circuit.
Download or read book Shreir s Corrosion written by and published by Elsevier. This book was released on 2009-02-27 with total page 3652 pages. Available in PDF, EPUB and Kindle. Book excerpt: This four-volume reference work builds upon the success of past editions of Elsevier’s Corrosion title (by Shreir, Jarman, and Burstein), covering the range of innovations and applications that have emerged in the years since its publication. Developed in partnership with experts from the Corrosion and Protection Centre at the University of Manchester, Shreir’s Corrosion meets the research and productivity needs of engineers, consultants, and researchers alike. Incorporates coverage of all aspects of the corrosion phenomenon, from the science behind corrosion of metallic and non-metallic materials in liquids and gases to the management of corrosion in specific industries and applications Features cutting-edge topics such as medical applications, metal matrix composites, and corrosion modeling Covers the benefits and limitations of techniques from scanning probes to electrochemical noise and impedance spectroscopy
Download or read book Corrosion of Metals written by Helmut Kaesche and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 604 pages. Available in PDF, EPUB and Kindle. Book excerpt: Corrosion due to water is one of the most significant and complex causes of damage to metallic products. Written from the viewpoint of physical chemistry, this authoritative and established text deals with the aqueous corrosion of metals. Available for the first time in English, Corrosion of Metal addressing engineers, metallurgists, physicists and chemists. This self-contained, valuable reference comprehensively organizes and makes readily accessible the accumulated wealth of fundamental and applied knowledge. The concentration is on the underlying essentials of corrosion and failure, and the material is consistently presented in relation to practical applications to corrosion protection. The first chapters introducing the physicochemical principles are ideal for students. The following chapters provide an overview of the state of research for those familiar with the fundamentals. An exhaustive bibliography and appendices conclude the volume.
Download or read book Supercritical Fluids as Solvents and Reaction Media written by Gerd H. Brunner and published by Elsevier. This book was released on 2004-06-11 with total page 651 pages. Available in PDF, EPUB and Kindle. Book excerpt: Supercritical fluids behave either like a gas or a liquid, depending on the values of thermodynamic properties. This tuning of properties, and other advantageous properties of supercritical fluids led to innovative technologies. More than 100 plants of production size are now in operation worldwide in the areas of process and production technology, environmental applications, and particle engineering. New processes are under research and development in various fields. This book provides an overview of the research activities in the field of Supercritical Fluids in Germany. It is based on the research program "Supercritical fluids as solvents and reaction media" on the initiative of the "GVC-Fachausschuß Hochdruckverfahrenstechnik" (i.e. the German working party on High Pressure Chemical Engineering of the Society of Chemical Engineers).This research program provided an immensely valuable platform for exchange of knowledge and experience. More than 50 young researchers were involved contributing with their expertise, their new ideas, and the motivation of youth. The results of this innovative research are described in this book.- This book provides an overview of the research activities in the field of Supercritical Fluids in Germany- Contains results of projects within the research program on "Supercritical fluids as solvents and reaction media" on the initiative of the German working party on High Pressure Chemical Engineering of the Society of Chemical Engineers.- More than 50 young researchers were involved in contributing with their expertise, their new ideas, and the motivation of youth.
Download or read book Research Perspectives on Functional Micro and Nanoscale Coatings written by Zuzuarregui, Ana and published by IGI Global. This book was released on 2016-04-11 with total page 532 pages. Available in PDF, EPUB and Kindle. Book excerpt: Just as chemistry is a part of our daily lives, functional coatings can be found in almost every object, gadget or device you can see or touch. However, in the last 20 years the advances made in the preparation of different functional coatings with diverse compositions have allowed the development of nanoscale coatings that are more cost-effective and environmentally conscious than traditional coatings. Research Perspectives on Functional Micro- and Nanoscale Coatings highlights critical research on preparation methods, modification, organization, and utilization of functional coatings in micro, nano, and biotechnology. Emphasizing emerging developments and global research perspectives, this publication is a pivotal resource for engineers, researchers, and graduate-level students interested in learning about emerging developments in functional coatings and nanotechnology.
Download or read book Passivity and Its Breakdown on Iron and Iron Base Alloys written by R. W. Staehle and published by . This book was released on 1976 with total page 212 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Nickel Cobalt and Their Alloys written by Joseph R. Davis and published by ASM International. This book was released on 2000-01-01 with total page 450 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a comprehensive guide to the compositions, properties, processing, performance, and applications of nickel, cobalt, and their alloys. It includes all of the essential information contained in the ASM Handbook series, as well as new or updated coverage in many areas in the nickel, cobalt, and related industries.
