Download or read book Introduction to Particle Technology written by Martin J. Rhodes and published by John Wiley & Sons. This book was released on 2013-03-25 with total page 472 pages. Available in PDF, EPUB and Kindle. Book excerpt: Particle technology is a term used to refer to the science and technology related to the handling and processing of particles and powders. The production of particulate materials, with controlled properties tailored to subsequent processing and applications, is of major interest to a wide range of industries, including chemical and process, food, pharmaceuticals, minerals and metals companies and the handling of particles in gas and liquid solutions is a key technological step in chemical engineering. This textbook provides an excellent introduction to particle technology with worked examples and exercises. Based on feedback from students and practitioners worldwide, it has been newly edited and contains new chapters on slurry transport, colloids and fine particles, size enlargement and the health effects of fine powders. Topics covered include: Characterization (Size Analysis) Processing (Granulation, Fluidization) Particle Formation (Granulation, Size Reduction) Storage and Transport (Hopper Design, Pneumatic Conveying, Standpipes, Slurry Flow) Separation (Filtration, Settling, Cyclones) Safety (Fire and Explosion Hazards, Health Hazards) Engineering the Properties of Particulate Systems (Colloids, Respirable Drugs, Slurry Rheology) This book is essential reading for undergraduate students of chemical engineering on particle technology courses. It is also valuable supplementary reading for students in other branches of engineering, applied chemistry, physics, pharmaceutics, mineral processing and metallurgy. Practitioners in industries in which powders are handled and processed may find it a useful starting point for gaining an understanding of the behavior of particles and powders. Review of the First Edition taken from High Temperatures - High pressures 1999 31 243 – 251 "..This is a modern textbook that presents clear-cut knowledge. It can be successfully used both for teaching particle technology at universities and for individual study of engineering problems in powder processing."

Download or read book Particle Technology and Engineering written by Jonathan P.K. Seville and published by Butterworth-Heinemann. This book was released on 2016-05-20 with total page 296 pages. Available in PDF, EPUB and Kindle. Book excerpt: Particle Technology and Engineering presents the basic knowledge and fundamental concepts that are needed by engineers dealing with particles and powders. The book provides a comprehensive reference and introduction to the topic, ranging from single particle characterization to bulk powder properties, from particle-particle interaction to particle-fluid interaction, from fundamental mechanics to advanced computational mechanics for particle and powder systems. The content focuses on fundamental concepts, mechanistic analysis and computational approaches. The first six chapters present basic information on properties of single particles and powder systems and their characterisation (covering the fundamental characteristics of bulk solids (powders) and building an understanding of density, surface area, porosity, and flow), as well as particle-fluid interactions, gas-solid and liquid-solid systems, with applications in fluidization and pneumatic conveying. The last four chapters have an emphasis on the mechanics of particle and powder systems, including the mechanical behaviour of powder systems during storage and flow, contact mechanics of particles, discrete element methods for modelling particle systems, and finite element methods for analysing powder systems. This thorough guide is beneficial to undergraduates in chemical and other types of engineering, to chemical and process engineers in industry, and early stage researchers. It also provides a reference to experienced researchers on mathematical and mechanistic analysis of particulate systems, and on advanced computational methods. - Provides a simple introduction to core topics in particle technology: characterisation of particles and powders: interaction between particles, gases and liquids; and some useful examples of gas-solid and liquid-solid systems - Introduces the principles and applications of two useful computational approaches: discrete element modelling and finite element modelling - Enables engineers to build their knowledge and skills and to enhance their mechanistic understanding of particulate systems

Download or read book Fundamentals of Particle Technology written by Richard Holdich and published by MidlandIT. This book was released on 2020-12-01 with total page 184 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fundamentals of Particle Technology is designed to assist the understanding of how particulate materials behave during processing and is written with engineers and scientists, who are new to the subject, in mind. It is accessible, in both cost and style, and is illustrated with numerous line diagrams. Most of the 16 chapters end with questions in multiple choice format. This helps problem decomposition and the reader can see each step required to arrive at an overall process solution. If the reader makes a mistake with any of the steps he, or she, usually does not see their answer and will immediately know where they have gone wrong. The aspects of Particle Technology covered include: particle characterisation, solid/liquid and solid/gas separations, fluidisation, flow of (and in) dispersions, powder mixing, storage, hazards, crushing and colloidal interaction. Extensive Internet support and referencing is provided. The teaching style adopted is the result of experience gained from presenting the subject for over 30 years at both undergraduate and postgraduate level.

Download or read book Processing of Particulate Solids written by J.P. Seville and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over half of the products of the chemical and process industries are sold in a particulate form. The range of such products is vast: from agrochemicals to pigments, from detergents to foods, from plastics to pharmaceuticals. However, surveys of the performance of processes designed to produce particulate products have consistently shown inadequate design and poor reliability. `Particle technology' is a new subject facing new challenges. Chemical and process engineering is becoming less concerned with the design of plants to produce generic simple chemicals (which are often single phase fluids) and is now more concerned with speciality `effect' chemicals which may often be in particulate form. Chemical and process engineers are also being recruited in increasing numbers into areas outside their tranditional fields, such as the food industry, pharmaceuticals and the manufacture of a wide variety of consumer products. This book has been written to meet their needs. It provides comprehensive coverage of the technology of particulate solids, in a form which is both accessible and concise enough to be useful to engineering and science students in the final year of an undergraduate degree, and at Master's level. Although it was written with students of chemical engineering in mind, it will also be of use and interest to students of other disciplines. It comprises an account of the fundamentals of teh subject, illustrated by worked examples, and followed by a wide range of selected applications.

Download or read book Diesel Particulate Filter Technology written by Timothy V Johnson and published by SAE International. This book was released on 2007-03-28 with total page 374 pages. Available in PDF, EPUB and Kindle. Book excerpt: Until recently, the complexity of the Diesel Particulate Filter (DPF) system has hindered its commercial success. Stringent regulations of diesel emissions has lead to advancements in this technology, therefore mainstreaming the use of DPFs in light- and heavy-duty diesel filtration applications. This book covers the latest and most important research in DPF systems, focusing mainly on the advancements of the years 2002-2006. Editor Timothy V. Johnson selected the top 29 SAE papers covering the most significant research in this technology.

Download or read book Particulate Technology for Delivery of Therapeutics written by Sougata Jana and published by Springer. This book was released on 2017-10-09 with total page 457 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book focuses on novel particulate technologies for the purpose of drug delivery to humans. Nowadays, macro and nano-scale particles are being investigated for targeted delivery of small and large biological macromolecules. The targeting of drugs can minimize the dosage regimen and reduces dose related potential toxicity of drug molecules, which in turn lead to increased potential compliance. Various types of organic, inorganic and polymer particles are currently being investigated. These are attracting the attention of the research workers in the field of drug delivery science and technology. This book covers polymersomes, inorganic- organic composites, gold nanoparticles biopolymer and synthetic polymer particles etc.All aspects of drug delivery in relation to each technology have been described including these advances, Easy to read and understand the content of each chapter Rich in up-to-date information regarding their application.

Download or read book Particle Technology and Applications written by Sunggyu Lee and published by CRC Press. This book was released on 2016-04-19 with total page 335 pages. Available in PDF, EPUB and Kindle. Book excerpt: Particle Technology and Applications presents the theoretical and technological background of particle science and explores up-to-date applications of particle technologies in the chemical, petrochemical, energy, mechanical, and materials industries. It looks at the importance of particle science and technology in the development of efficient chemi

Download or read book Particle Therapy Technology for Safe Treatment written by Jay Flanz and published by CRC Press. This book was released on 2022-01-18 with total page 492 pages. Available in PDF, EPUB and Kindle. Book excerpt: The path from clinical requirements to technical implementation is filtered by the translation of the modality to the technology. An important part of that filter is that the modality be safe. For that to be the case, it is imperative to understand what clinical parameters affect the safety of a treatment and then determine how the technology can affect those parameters. This book provides a practical introduction to particle therapy. It provides a thorough introduction to the technological tools and their applications and then details the components that are needed to implement them. It explains the foundations of beam production and beam delivery that serve to meet the necessary clinical requirements. It emphasizes the relationship between requirements and implementation, including how safety and quality are considered and implemented in the solution. The reader will learn to better understand what parameters are important to achieve these goals. Particle Therapy Technology for Safe Treatment will be a useful resource for professionals in the field of particle therapy in addition to biomedical engineers and practitioners in the field of beam physics. It can also be used as a textbook for graduate medical physics and beam physics courses. Key Features Presents a practical and accessible journey from application requirements to technical solutions Provides a pedagogic treatment of the underlying technology Describes how safety is to be considered in the application of this technology and how safety and quality can be factored into the overall system Author Bio After receiving his PhD in nuclear physics, Dr. Jacob Flanz was the Accelerator Physics Group leader and Principal Research Scientist at the Massachusetts Institute of Technology (MIT), USA, where he designed the recirculator and the GeV stretcher/storage ring. He joined Massachusetts General Hospital (MGH) and Harvard and became project and technical director of proton therapy, with responsibility for specifications, integration, and commissioning ensuring safe clinical performance. He invented the universal nozzle and led the design and implementation of beam scanning at MGH in 2008, including quality assurance. Dr. Flanz has been involved in several FDA applications for particle therapy. He developed and taught the US Particle Accelerator School course "Medical Applications of Accelerators and Beams." He was cochair of education and is currently the president of the Particle Therapy Co-Operative Group. Exercise solutions to accompany this book can be accessed via the 'Instructor Resources' tab on the book webpage.

Download or read book Particle Breakage written by Agba D. Salman and published by Elsevier. This book was released on 2007-11-01 with total page 1241 pages. Available in PDF, EPUB and Kindle. Book excerpt: Particle breakage is an important process within a wide range of solids processing industries, including pharmaceuticals, food, agricultural and mining. Breakage of particles can be defined as intentional and unintentional, depending on whether it is desired or not. Through understanding of the science and underlying mechanisms behind this phenomenon, particle breakage can be either minimised or encouraged within an efficient and effective process. Particle Breakage examines particle breakage at three different length scales, ranging from single particle studies through groups of particles and looking at solid processing steps as a whole. This book is the widest ranging book in the field and includes the most up-to-date techniques such as Distinct Element Method (DEM), Monte Carlo simulations and Population Balance Equations (PBE). This handbook provides an overview of the current state-of-the- art and particle breakage. From the small scale of a single particle, to the study of whole processes for breakage; both by experimental study and mathematical modelling.* Covering a wide range of subjects and industrial applications* Allows the reader an understanding of the science behind engineered breakage processes* Giving an unrestrictive and interdisciplinary approach

Download or read book Particle Characterization Light Scattering Methods written by Renliang Xu and published by Springer Science & Business Media. This book was released on 2006-04-11 with total page 411 pages. Available in PDF, EPUB and Kindle. Book excerpt: Particle characterization is an important component in product research and development, manufacture, and quality control of particulate materials and an important tool in the frontier of sciences, such as in biotechnology and nanotechnology. This book systematically describes one major branch of modern particle characterization technology - the light scattering methods. This is the first monograph in particle science and technology covering the principles, instrumentation, data interpretation, applications, and latest experimental development in laser diffraction, optical particle counting, photon correlation spectroscopy, and electrophoretic light scattering. In addition, a summary of all major particle sizing and other characterization methods, basic statistics and sample preparation techniques used in particle characterization, as well as almost 500 latest references are provided. The book is a must for industrial users of light scattering techniques characterizing a variety of particulate systems and for undergraduate or graduate students who want to learn how to use light scattering to study particular materials, in chemical engineering, material sciences, physical chemistry and other related fields.

Download or read book Coulson and Richardson s Chemical Engineering written by R. P. Chhabra and published by Butterworth-Heinemann. This book was released on 2019-04-15 with total page 874 pages. Available in PDF, EPUB and Kindle. Book excerpt: Coulson and Richardson's Chemical Engineering: Volume 2A: Particulate Systems and Particle Technology, Sixth Edition, has been fully revised and updated to provide practitioners with an overview of chemical engineering, including clear explanations of theory and thorough coverage of practical applications, all supported by case studies. A worldwide team of contributors has pooled their experience to revise old content and add new content. The content has been updated to be more useful to practicing engineers. This complete reference to chemical engineering will support you throughout your career, as it covers every key chemical engineering topic. Fluid Flow, Heat Transfer and Mass Transfer has been developed from the series' volume 1, 6th edition. This volume covers the three main transport process of interest to chemical engineers: momentum transfer (fluid flow), heat transfer and mass transfer and the relationships between them. Particulate Systems and Particle Technology has been developed from the series' volume 2, 5th edition. This volume covers the properties of particulate systems, including the character of individual particles and their behavior in fluids. Sedimentation of particles, both singly and at high concentrations, flow in packed and fluidized beads and filtration are then examined. Separation Processes has been developed from the series' volume 2, 5th edition. This volume covers distillation and gas absorption, which illustrate applications of the fundamental principles of mass transfer. Several techniques—adsorption, ion exchange, chromatographic and membrane separations, and process intensification—are described. Chemical and Biochemical Reactors and Reaction Engineering has been developed from the series' volume 3, 3rd edition. - Features fully revised reference material converted from textbooks - Covers foundational to technical topics - Features emerging applications, numerical methods and computational tools

Download or read book Particle Size Enlargement written by C. E. Capes and published by Elsevier. This book was released on 2013-10-22 with total page 205 pages. Available in PDF, EPUB and Kindle. Book excerpt: Handbook of Powder Technology, Volume 1: Particle Size Enlargement is the first of a series which will together form a Handbook of Powder Technology, primarily intended for engineers and scientists working in industry. The scope of the Handbook can be defined as being concerned with that part of chemical engineering which deals with processes involving the handling and treatment of material in solid particulate form. This book deals with methods used to create larger entities from fine particles so that the bulk properties of particulates can be improved. These so-called ""size enlargement"" methods evidently concern a broad spectrum of technical disciplines and industries ranging from the relatively small scale requirements of pharmaceutical manufacturers through the tonnage requirements of the fertilizer and minerals processing industries. A primary objective in preparing this book was to present a generalized account of the many size enlargement techniques scattered throughout these diverse industries, with emphasis on similarities and unifying characteristics whenever possible. The book devotes one chapter to each of the principal methods used to bring particles together into agglomerates: agitation methods— tumbling agglomeration, agitation methods—mixer agglomeration, pressure methods, thermal methods, spray and dispersion methods, and agglomeration from liquids.

Download or read book Particle Size Measurements written by Henk G. Merkus and published by Springer Science & Business Media. This book was released on 2009-01-07 with total page 535 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on the practical aspects of particle size measurement: a major difference with existing books, which have a more theoretical approach. Of course, the emphasis still lies on the measurement techniques. For optimum application, their theoretical background is accompanied by quantitative quality aspects, limitations and problem identification. In addition the book covers the phenomena of sampling and dispersion of powders, either of which may be dominant in the overall analysis error. Moreover, there are chapters on the general aspects of quality for particle size analysis, quality management, reference materials and written standards, in- and on-line measurement, definitions and multilingual terminology, and on the statistics required for adequate interpretation of results. Importantly, a relation is made to product performance, both during processing as well as in final application. In view of its set-up, this book is well suited to support particle size measurement courses.

Download or read book Particulate Systems in Nano and Biotechnologies written by Wolfgang Sigmund and published by CRC Press. This book was released on 2008-12-22 with total page 424 pages. Available in PDF, EPUB and Kindle. Book excerpt: Despite the widespread growth and acceptance of particulate technology, challenges in the design, operation, and manufacturing of these systems still exists. These critical issues must be resolved so that particle technology may continue to serve as a foundation for new nano and biotechnologies. Particulate Systems in Nano- and Biotechnologies pres

Download or read book Powder Surface Area and Porosity written by S. Lowell and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 244 pages. Available in PDF, EPUB and Kindle. Book excerpt: The rapid growth of interest in powders and their surface properties in many diverse industries prompted the writing of this book for those who have the need to make meaningful measurements without the benefit of years of experience. It is intended as an introduction to some of the elementary theory and experimental methods used to study the surface area, porosity and density of powders. It may be found useful by those with little or no training in solid surfaces who have the need to quickly learn the rudiments of surface area, density and pore-size measurements. Syosset, New York S. Lowell May, 1983 J. E. Shields Xl List of symbols Use of symbols for purposes other than those indicated in the following list are so defined in the text. Some symbols not shown in this list are defined in the text. d adsorbate cross-sectional area A area; condensation coefficient; collision frequency C BET constant c concentration D diameter; coefficient of thermal diffusion E adsorption potential f permeability aspect factor F flow rate; force; feed rate 9 gravitational constant G Gibbs free energy GS free surface energy h heat of immersion per unit area; height H enthalpy Hi heat of immersion Hsv heat of adsorption BET intercept; filament current k thermal conductivity; specific reaction rate K Harkins-Jura constant I length L heat of liquefaction M mass M molecular weight n number of moles N number of molecules; number of particles N Avagadro's number .

Download or read book Chemical Engineering Volume 2 written by J H Harker and published by Elsevier. This book was released on 2013-10-22 with total page 1219 pages. Available in PDF, EPUB and Kindle. Book excerpt: Chemical Engineering Volume 2 covers the properties of particulate systems, including the character of individual particles and their behaviour in fluids. Sedimentation of particles, both singly and at high concentrations, flow in packed and fluidised beads and filtration are then examined. The latter part of the book deals with separation processes, such as distillation and gas absorption, which illustrate applications of the fundamental principles of mass transfer introduced in Chemical Engineering Volume 1. In conclusion, several techniques of growing importance - adsorption, ion exchange, chromatographic and membrane separations, and process intensification - are described. - A logical progression of chemical engineering concepts, volume 2 builds on fundamental principles contained in Chemical Engineering volume 1 and these volumes are fully cross-referenced - Reflects the growth in complexity and stature of chemical engineering over the last few years - Supported with further reading at the end of each chapter and graded problems at the end of the book

Download or read book Particle Characterization in Technology written by J.K. Beddow and published by CRC Press. This book was released on 2018-01-18 with total page 362 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first section of volume II deals with both theory and methods of morphological analysis, it then discusses data analysis, and finally, the applications.