Download or read book Particles on Surfaces Detection Adhesion and Removal Volume 7 written by Kash L. Mittal and published by CRC Press. This book was released on 2023-01-06 with total page 462 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume documents the proceedings of the 7th International Symposium on Particles on Surfaces: Detection, Adhesion and Removal held in Newark, NJ, June 19-21, 2000. The study of particles on surfaces is extremely important in a host of diverse technological areas, ranging from microelectronics to optics to biomedical. This volume contains a total of 28 papers, which were all properly peer reviewed, revised and edited before inclusion. Therefore, this book is not merely a collection of unreviewed manuscripts, but rather represents information which has passed peer scrutiny. Furthermore, the authors were asked to update their manuscripts, so the information contained in this book should be current and fresh. This volume is divided into two parts: 1) Particle Analysis and General Cleaning-Related Topics; and 2) Particle Adhesion and Removal. The topics covered include: surface analysis techniques for particle identification; cleaning, rinsing and drying issues in post-CMP cleaning; fundamental forces involved in particle adhesion; factors affecting adhesion of small (nanosize) particles; factors important in particle detachment; particle adhesion measurement by AFM; various (wet and dry) techniques for particle removal, e.g., laser, ultrasonic, megasonic, use of surfactants; toner particles and pharmaceutical particles. This volume offers a wealth of information on the tremendously technologically important field of particles on surfaces and should provide a consolidated source of current R&D activity in this arena. Therefore, it will be of value and use to anyone interested in the topic of particles on surfaces.
Download or read book Particles on Surfaces Detection Adhesion and Removal Volume 7 written by and published by . This book was released on 2023 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume documents the proceedings of the 7th International Symposium on Particles on Surfaces: Detection, Adhesion and Removal held in Newark, NJ, June 19-21, 2000. The study of particles on surfaces is extremely important in a host of diverse technological areas, ranging from microelectronics to optics to biomedical. This volume contains a total of 28 papers, which were all properly peer reviewed, revised and edited before inclusion. Therefore, this book is not merely a collection of unreviewed manuscripts, but rather represents information which has passed peer scrutiny. Furthermore, the authors were asked to update their manuscripts, so the information contained in this book should be current and fresh. This volume is divided into two parts: 1) Particle Analysis and General Cleaning-Related Topics; and 2) Particle Adhesion and Removal. The topics covered include: surface analysis techniques for particle identification; cleaning, rinsing and drying issues in post-CMP cleaning; fundamental forces involved in particle adhesion; factors affecting adhesion of small (nanosize) particles; factors important in particle detachment; particle adhesion measurement by AFM; various (wet and dry) techniques for particle removal, e.g., laser, ultrasonic, megasonic, use of surfactants; toner particles and pharmaceutical particles. This volume offers a wealth of information on the tremendously technologically important field of particles on surfaces and should provide a consolidated source of current R&D activity in this arena. Therefore, it will be of value and use to anyone interested in the topic of particles on surfaces.
Download or read book Particles on Surfaces 1 written by K.L. Mittal and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 377 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume chronicles the proceedings of the Symposium on Particles on Surfaces: Detection, Adhesion and Removal held under the auspices of the Fine Particle Society in San Francisco, July 28-August 2, 1986. The study of particles on surfaces is extremely important in many areas of human endeavor (ranging from microelectronics to optics to biomedical). A complete catalog of modern precision and sophisticated technologies where particles on surfaces are of cardinal importance will be prohibitively long, but the following eclectic examples should underscore the concern about particles on a variety of surfaces. In the semiconductor world of shrinking dimensions, particles which, a few years ago, were cosmetically undesirable but functionally innocuous can potentially be killer defects now. As the device sizes get smaller, there will be more and more concern about smaller and smaller particles. In the information storage technology, the gap between the head and the disk is very narrow, and if a particle is trapped in the gap that can have very grave consequences. The implications of particulate contamination on sensitive optical surfaces is all too manifest. So the particulate contamination on surfaces is undesirable from functional, yield and reliability points of view. This symposium was organized with the following objectives in mind: to bring together active practitioners in this field; to provide a forum for discussion of the latest research and development activities in this area; to provide opportunity for cross-pollination of ideas; and to highlight topics which needed intensified effort.
Download or read book Particles on Surfaces 3 written by K.L. Mittal and published by Springer Science & Business Media. This book was released on 2013-11-11 with total page 319 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume chronicles the proceedings of the Third Symposium on Particles on Surfaces : Detection, Adhesion and Removal held as a part of the 21st Annual Meeting of the Fine Particle Society in San Diego , California, August 21 - 25 , 1990 . The first two symposia i n t h i s series were held in 1986 and 1988 , respectively, and have been properly l documented ,2. Li ke its antecedent s the Third symposium was very well received, and the continuing success of these symposia reinforced our earlier belief that regular symposia on the topic of particles on surfaces were very much needed. Concomitantly, the fourth symposium in this series is planned in Las Vegas , July 13-17 , 199 2 . l As pointed out in the Preface to the earlier two volumes ,2, the topic of particles on surfaces is of tremendous interest and concern in a wide spectrum of technological areas . The objectives of the Third symposium were es s ent i a l ly the same as those of the earlier two and our intent her e was to provide an update on the research and development activities in the world of particles on surfaces . Apropos , there has been a deliberate attempt every time to s eek out new people to present their research results and we have been very succes s f ul in this mission.
Download or read book Particles on Surfaces written by K.L. Mittal and published by CRC Press. This book was released on 2020-08-26 with total page 442 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work comprises the proceedings of the Fourth Symposium on Particles on Surfaces. Papers cover: adhesion-induced deformations of particles on surfaces; the use of atomic force microscopy in probing particle-particle adhesion; particle contamination in microelectronics, on spacecraft, and on optical surfaces; the role of air ionization in reducing surface contamination by particles in the cleanroom; abrasive blasting media for contamination-free deburring processes; and more.;The book is intended for physical, chemical, surface and colloid chemists, materials scientists; polymers, plastics, electrical and electronics, computer, chemical and mechanical engineers; and upper-level undergraduate and graduate students in these disciplines.
Download or read book Particles on Surfaces Detection Adhesion and Removal written by Kash L. Mittal and published by CRC Press. This book was released on 2003-12-01 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume documents the proceedings of the 8th International Symposium on Particles on Surfaces: Detection, Adhesion and Removal held in Providence, Rhode Island, June 24a26, 2002. The study of particles on surfaces is extremely crucial in a host of diverse technological areas, ranging from microelectronics to optics to biomedical. In a world o
Download or read book Particles on Surfaces Five and Six written by Kashmiri Lal Mittal and published by VSP. This book was released on 1999-09 with total page 366 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume documents the Proceedings of the 5th and 6th Symposia on Particles on Surfaces: Detection, Adhesion and Removal, held under the aegis of the Fine Particle Society in Chicago (May 6--9, 1996) and Dallas (April 1--3, 1998), respectively. The technical programs clearly reflected an interest and need to ameliorate the existing methods and to devise new and more efficient ways to detect, analyze and characterize particles on surfaces. The removal of particles from a host of surfaces was especially highlighted; the need to remove smaller and smaller particles was particularly underscored. All manuscripts included in this volume were properly peer reviewed and all were revised before inclusion in this volume. Thus, this book is not a mere collection of unreviewed papers, but represents information that has passed peer scrutiny. Furthermore, the authors of the 5th Symposium were asked to update the information. So, the information presented in this book should be as fresh and up-to-date as possible. This volume is divided into two parts: Part 1. General Papers and Part 2. Particle Adhesion and Removal. The topics covered include: high-sensitivity rapid detection of particles; detection of particles using evanescent wave scattering; particles on the backside of wafers; particle shedding from fluid-handling components; dynamics of particle adhesion; particle dispersion/aggregation; precision cleaning; and particle removal by surfactants, supercritical fluids, hydrodynamic forces, high-speed droplet impinging, megasonic, CO2 blasting, CO2 snow, argon aerosol, lasers, microcluster beams, brush and chemical-mechanical methods. This volume offers bountiful information and represent a current commentary on the R&D activity taking place in the area of particles on surfaces, particularly particle removal from a variety of surfaces.
Download or read book Particles on Surfaces Detection Adhesion and Removal Volume 9 written by Kash L. Mittal and published by CRC Press. This book was released on 2006-06-01 with total page 365 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume chronicles the proceedings of the 9th International Symposium on Particles on Surfaces: Detection, Adhesion and Removal held in Philadelphia, PA, June 2004. The study of particles on surfaces is crucially important in a legion of diverse technological areas, ranging from microelectronics to biomedical to space. This volume contains a to
Download or read book Particles on Surfaces 2 written by K.L. Mittal and published by Springer. This book was released on 2011-10-01 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume documents the proceedings of the Second Symposium on Particles on Surfaces: Detection, Adhesion and Removal held as part of the 19th Annual Meeting of the Fine Particle Society in Santa Clara, California, July 20-25, 1988. The premier symposium on this topic was l organized in 1986 and has been properly chronicled . Based on the success of these two events and the high interest evinced by the technical community, we plan to regularly hold symposia on this topic on a biennial basis and the next one is slated for August 20-24, 1990 in San Diego, California. l As pointed out in the Preface to the first volume , the topic of particles on surfaces is of paramount importance in legion of technological areas. Particularly in the semiconductor device fabrication area, all signals indicate that the understanding of the behavior of particles on surfaces and their removal will attain heightened importance in the times to come. As the device dimensions are shrinking at an accelerated pace, so the benign particles of today will become the killer defects in the not too distant future. The tempo of research and development activity in the field of particles on surfaces is very high, and better and novel ways are continuously being devised to remove smaller and smaller particles.
Download or read book Particle Adhesion and Removal written by K. L. Mittal and published by John Wiley & Sons. This book was released on 2015-01-06 with total page 482 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book provides a comprehensive and easily accessible reference source covering all important aspects of particle adhesion and removal. The core objective is to cover both fundamental and applied aspects of particle adhesion and removal with emphasis on recent developments. Among the topics to be covered include: 1. Fundamentals of surface forces in particle adhesion and removal. 2. Mechanisms of particle adhesion and removal. 3. Experimental methods (e.g. AFM, SFA,SFM,IFM, etc.) to understand particle-particle and particle-substrate interactions. 4. Mechanics of adhesion of micro- and nanoscale particles. 5. Various factors affecting particle adhesion to a variety of substrates. 6. Surface modification techniques to modulate particle adhesion. 7. Various cleaning methods (both wet & dry) for particle removal. 8. Relevance of particle adhesion in a host of technologies ranging from simple to ultra-sophisticated.
Download or read book Particles on Surfaces 1 written by K.L. Mittal and published by Springer. This book was released on 1989-01-31 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume chronicles the proceedings of the Symposium on Particles on Surfaces: Detection, Adhesion and Removal held under the auspices of the Fine Particle Society in San Francisco, July 28-August 2, 1986. The study of particles on surfaces is extremely important in many areas of human endeavor (ranging from microelectronics to optics to biomedical). A complete catalog of modern precision and sophisticated technologies where particles on surfaces are of cardinal importance will be prohibitively long, but the following eclectic examples should underscore the concern about particles on a variety of surfaces. In the semiconductor world of shrinking dimensions, particles which, a few years ago, were cosmetically undesirable but functionally innocuous can potentially be killer defects now. As the device sizes get smaller, there will be more and more concern about smaller and smaller particles. In the information storage technology, the gap between the head and the disk is very narrow, and if a particle is trapped in the gap that can have very grave consequences. The implications of particulate contamination on sensitive optical surfaces is all too manifest. So the particulate contamination on surfaces is undesirable from functional, yield and reliability points of view. This symposium was organized with the following objectives in mind: to bring together active practitioners in this field; to provide a forum for discussion of the latest research and development activities in this area; to provide opportunity for cross-pollination of ideas; and to highlight topics which needed intensified effort.
Download or read book Particles on Surfaces Detection Adhesion and Removal written by Kash L. Mittal and published by CRC Press. This book was released on 2006-05-29 with total page 365 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume chronicles the proceedings of the 9th International Symposium on Particles on Surfaces: Detection, Adhesion and Removal held in Philadelphia, PA, June 2004. The study of particles on surfaces is crucially important in a legion of diverse technological areas, ranging from microelectronics to biomedical to space. This volume contains a total of 21 papers covering many ramifications of particles on surfaces, ranging from detection to removal. All manuscripts were rigorously peer-reviewed and revised, and properly edited before inclusion in this book. The topics covered include: imaging and analysis of macro and nanosize particles and surface features; determination of particles on surfaces; laser inactivation on surfaces; laser-assisted nanofabrication on surfaces; post-CMP cleaning process; pre-gate cleaning; solar panel obscuration in the Martian atmosphere; adhesion and friction of microsized particles; microroughness of textile fibers and capture of particles; factors affecting particle adhesion and removal; various techniques for cleaning or removal of particles from different substrates including laser, combination of laser-induced shockwave and explosive vaporization of liquid, attenuated total internal reflection of laser light, CO2 snow, use of dense phase fluids, use of surfactants and impinging air jet; and removal of sub-100-nm particles.
Download or read book Developments in Surface Contamination and Cleaning Vol 6 written by Rajiv Kohli and published by William Andrew. This book was released on 2013-05-27 with total page 213 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this series Rajiv Kohli and Kash Mittal have brought together the work of experts from different industry sectors and backgrounds to provide a state-of-the-art survey and best-practice guidance for scientists and engineers engaged in surface cleaning or handling the consequences of surface contamination. The expert contributions in this volume cover important fundamental aspects of surface contamination that are key to understanding the behavior of specific types of contaminants. This understanding is essential to develop preventative and mitigation methods for contamination control. The coverage complements the treatment of surface contamination in vol.1, Fundamental and Applied Aspects. This volume covers: Sources and Generation of Particles; Manipulation Techniques for Particles on Surfaces; Particle Deposition and Rebound; Particle Behavior in Liquid Systems; Biological and Metallic Contamination; and includes a comprehensive list of current standards and resources. Comprehensive coverage of innovations in surface contamination and cleaning Written by established experts in the contamination and cleaning field Each chapter is a comprehensive review of the state of the art Case studies included
Download or read book Recent Advances in Adhesion Science and Technology in Honor of Dr Kash Mittal written by Wojciech (Voytek) Gutowski and published by CRC Press. This book was released on 2013-12-31 with total page 374 pages. Available in PDF, EPUB and Kindle. Book excerpt: The surface of an object is the first thing we see or touch. Nearly every article or object we encounter at home, in industry, land transportation, aerospace, or the medical field in some way uses an adhesive, a sealant, or a decorative coating. Adhesion science provides the technology and the know-how behind these applications. Recent Advances in
Download or read book Particles in Gases and Liquids 3 written by K.L. Mittal and published by Springer Science & Business Media. This book was released on 2013-11-11 with total page 289 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book documents the proceedings of the Third Symposium on Particles in Gases and Liquids: Detection, Characterization and Control held as a part of the 22nd Annual Meeting of the Fine Particle Society in San Jose, California, July 29-August 2, 1991. This series of symposia was initiated in 1987 in light of the growing importance to eliminate particles from process gases and liquids. As pointed out in the Preface to antecedent volumes in this series that particles in process gases and liquids could cause significant yield losses in precision manufacturing and concomitantly there has been heightened interest in understanding the behavior of particles in gases and liquids and devising ways to eliminate, or at least reduce substantially, these particles. The concern about particles in gases and liquids has been there for qui.te some time in the microelectronics arena, but there are other areas also where particles are of significant concern, e.g. in operation theatres in hospitals, food and beverage industry, and pharmaceutical manufacturing. This symposium basically had the same objectives as its predecessors, but to provide an update on the R&D activity taking place in the arena of particle detection, characterization and control. The printed program comprised a total of 28 papers dealing with variegated aspects of particles in gases and liquids. There were brisk and lively discussions and the attendees offered many positive comments, which goes to show that it was a well-received and needed symposium.
Download or read book Particles in Gases and Liquids 2 written by K.L. Mittal and published by Springer Science & Business Media. This book was released on 2013-11-11 with total page 393 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book chronicles the proceedings of the Second Symposium on Particles in Gases and Liquids: Detection, Characterization and Control held as a part of the 20th Annual Fine Particle Society meeting in Boston, August 21-25, 1989. As this second symposium was as successful as the prior one, so we have decided to hold symposia on this topic on a regular (biennial) basis and the third symposium in this series is scheduled to be held at the 22nd Annual Meeting of the Fine Particle Society in San Jose, California, July 29-August 2, 1991. l As pointed out in the Preface to the prior volume in this series that recently there has been tremendous concern about yield losses due to unwanted particles, and these unwelcome particles can originate from a legion of sources, including process gases and liquids. Also all signals indicate that in the future manufacture of sophisticated and sensitive microelectronic components (with shrinking dimensions) and other precision parts, the need for detection, characterization, analysis and control of smaller and smaller particles will be more intensified.
Download or read book Developments in Surface Contamination and Cleaning Volume 7 written by Rajiv Kohli and published by William Andrew. This book was released on 2014-11-18 with total page 207 pages. Available in PDF, EPUB and Kindle. Book excerpt: As device sizes in the semiconductor industries are shrinking, they become more vulnerable to smaller contaminant particles, and most conventional cleaning techniques employed in the industry are not as effective at smaller scales. The book series Developments in Surface Contamination and Cleaning as a whole provides an excellent source of information on these alternative cleaning techniques as well as methods for characterization and validation of surface contamination. Each volume has a particular topical focus, covering the key techniques and recent developments in the area. The chapters in this Volume address the sources of surface contaminants and various methods for their collection and characterization, as well as methods for cleanliness validation. Regulatory aspects of cleaning are also covered. The collection of topics in this book is unique and complements other volumes in this series. Edited by the leading experts in small-scale particle surface contamination, cleaning and cleaning control, these books will be an invaluable reference for researchers and engineers in R&D, manufacturing, quality control and procurement specification situated in a multitude of industries such as: aerospace, automotive, biomedical, defense, energy, manufacturing, microelectronics, optics and xerography. Provides a state-of-the-art survey and best-practice guidance for scientists and engineers engaged in surface cleaning or handling the consequences of surface contamination Addresses the continuing trends of shrinking device size and contamination vulnerability in a range of industries, spearheaded by the semiconductor industry and others Includes new regulatory aspects