Download or read book Particle in cell Simulations of Lower density CM scale Capillary Channels written by and published by . This book was released on 2005 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Capillary channels of cm-length and at plasma density low compared to gas jets are promising setups for low noise laser wakefield acceleration. Computationally, however, the large discrepancy of the length scales of the plasma and the laser are a big challenge. Methods are therefore sought that relax the need to concurrently resolve both length scales. Average methods, which split the electromagnetic field into a fast and a slowly varying part, allow to relax the constraint to resolve the laser wavelength. Such an envelope model is currently being incorporated into the VORPAL plasma simulation code. Simulation results for benchmark cases and for laser pulse propagation in a cm-scale channel are presented.
Download or read book Advanced Accelerator Concepts written by Manoel Conde and published by American Institute of Physics. This book was released on 2006-12-13 with total page 954 pages. Available in PDF, EPUB and Kindle. Book excerpt: This workshop covered the general field of advanced particle accelerators, exploring the science and technology of a multitude of novel acceleration schemes. Various schemes under study utilize combinations of plasmas, laser beams, dielectric materials, and RF power. The development of technologies that will enable the design of future high energy physics machines is the underlying goal of this workshop.
Download or read book Advanced Accelerator Concepts written by Vitaly Yakimenko and published by American Institute of Physics. This book was released on 2004-12-14 with total page 1056 pages. Available in PDF, EPUB and Kindle. Book excerpt: These proceedings cover new developments for a number of the most advanced methods for acceleration of heavy ions, protons, electrons and positrons.
Download or read book Theory and Design of Charged Particle Beams written by Martin Reiser and published by John Wiley & Sons. This book was released on 2008-09-26 with total page 634 pages. Available in PDF, EPUB and Kindle. Book excerpt: Although particle accelerators are the book's main thrust, it offers a broad synoptic description of beams which applies to a wide range of other devices such as low-energy focusing and transport systems and high-power microwave sources. Develops material from first principles, basic equations and theorems in a systematic way. Assumptions and approximations are clearly indicated. Discusses underlying physics and validity of theoretical relationships, design formulas and scaling laws. Features a significant amount of recent work including image effects and the Boltzmann line charge density profiles in bunched beams.
Download or read book Reviews Of Accelerator Science And Technology Volume 9 Technology And Applications Of Advanced Accelerator Concepts written by Alexander Wu Chao and published by World Scientific. This book was released on 2017-02-20 with total page 344 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since its invention in the 1920s, particle accelerators have made tremendous progress in accelerator science, technology and applications. However, the fundamental acceleration principle, namely, to apply an external radiofrequency (RF) electric field to accelerate charged particles, remains unchanged. As this method (either room temperature RF or superconducting RF) is approaching its intrinsic limitation in acceleration gradient (measured in MeV/m), it becomes apparent that new methods with much higher acceleration gradient (measured in GeV/m) must be found for future very high energy accelerators as well as future compact (table-top or room-size) accelerators. This volume introduces a number of advanced accelerator concepts (AAC) — their principles, technologies and potential applications. For the time being, none of them stands out as a definitive direction in which to go. But these novel ideas are in hot pursuit and look promising. Furthermore, some AAC requires a high power laser system. This has the implication of bringing two different communities — accelerator and laser — to join forces and work together. It will have profound impact on the future of our field.Also included are two special articles, one on 'Particle Accelerators in China' which gives a comprehensive overview of the rapidly growing accelerator community in China. The other features the person-of-the-issue who was well-known nuclear physicist Jerome Lewis Duggan, a pioneer and founder of a huge community of industrial and medical accelerators in the US.
Download or read book Spectral Line Broadening by Plasmas written by Hans Griem and published by Elsevier. This book was released on 2012-12-02 with total page 425 pages. Available in PDF, EPUB and Kindle. Book excerpt: Spectral Line Broadening by Plasmas deals with spectral line broadening by plasmas and covers topics ranging from quasi-static approximation and impact approximation to intermediate approximations and correlation effects. Experimental results for hydrogen lines, lines with forbidden components, and ionized helium lines are presented. Applications such as density and temperature measurements are also considered. Comprised of four chapters, this volume begins with an overview of the effects of electric fields from electrons and ions (both acting as point charges) on spectral line shapes. The next chapter surveys theoretical work, paying particular attention to quasi-static, impact, and intermediate approximations as well as correlation effects. Stark broadening experiments are then discussed, with special emphasis on experiments capable of checking the accuracy or validity limits of the various approximations. The final chapter is devoted to applications in laboratory plasma physics and astronomy, focusing on density and temperature measurements and opacity calculations as well as the analysis of stellar atmospheres, amplitudes and spectra of plasma waves, and radio frequency lines. This book should appeal to students, practitioners, and researchers in pure and applied physics.
Download or read book Artificial Cilia written by Jaap MJ den Toonder and published by Royal Society of Chemistry. This book was released on 2013-05-31 with total page 279 pages. Available in PDF, EPUB and Kindle. Book excerpt: Cilia are tiny hairs covering biological cells to generate and sense fluid flow. Millions of years of evolution have inspired a novel technology which is barely a decade old. Artificial cilia have been developed to control and sense fluid flow in microscopic systems, presenting new and interesting options for flow control in lab-on-a-chip devices. This appealing link between nature and technology has seen rapid development in the last few years, and this book presents a review of the state-of-the-art in the form of a professional reference book. The editors have pioneered the field, having initiated a major European project on this topic soon after its inception. Active researchers in academia and industry will benefit from the comprehensive nature of this book, while postgraduates and those new to the field will gain a clear understanding of the theory, techniques and applications of artificial cilia.
Download or read book Lattice Boltzmann Modeling written by Michael C. Sukop and published by Springer Science & Business Media. This book was released on 2007-04-05 with total page 178 pages. Available in PDF, EPUB and Kindle. Book excerpt: Here is a basic introduction to Lattice Boltzmann models that emphasizes intuition and simplistic conceptualization of processes, while avoiding the complex mathematics that underlies LB models. The model is viewed from a particle perspective where collisions, streaming, and particle-particle/particle-surface interactions constitute the entire conceptual framework. Beginners and those whose interest is in model application over detailed mathematics will find this a powerful 'quick start' guide. Example simulations, exercises, and computer codes are included.
Download or read book Particulate Discrete Element Modelling written by Catherine O'Sullivan and published by CRC Press. This book was released on 2011-04-06 with total page 574 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first single work on DEM providing the information to get started with this powerful numerical modelling approach. Provides the basic details of the numerical method and the approaches used to interpret the results of DEM simulations. It will be of use to professionals, researchers and higher level students, with a theoretical overview of DEM as well as practical guidance.Selected Contents: 1.Introduction 2.Use of DEM in Geomechanics 3.Calculation of Contact Forces 4.Particle Motion 5.Particle Types 6.Boundary Conditions 7.Initial Geometry and Specimen Generation 8.Time Integration and Discrete Element Modelling 9.DEM Interpretation: A Continuum Perspective 10.Postprocessing: Graphical Interpretation of DEM Simulations 11.Basic Statisti
Download or read book Applications Tools and Techniques on the Road to Exascale Computing written by Koen de Bosschere and published by IOS Press. This book was released on 2012 with total page 688 pages. Available in PDF, EPUB and Kindle. Book excerpt: Single processing units have now reached a point where further major improvements in their performance are restricted by their physical limitations. This is causing a slowing down in advances at the same time as new scientific challenges are demanding exascale speed. This has meant that parallel processing has become key to High Performance Computing (HPC). This book contains the proceedings of the 14th biennial ParCo conference, ParCo2011, held in Ghent, Belgium. The ParCo conferences have traditionally concentrated on three main themes: Algorithms, Architectures and Applications. Nowadays though, the focus has shifted from traditional multiprocessor topologies to heterogeneous and manycores, incorporating standard CPUs, GPUs (Graphics Processing Units) and FPGAs (Field Programmable Gate Arrays). These platforms are, at a higher abstraction level, integrated in clusters, grids and clouds. The papers presented here reflect this change of focus. New architectures, programming tools and techniques are also explored, and the need for exascale hardware and software was also discussed in the industrial session of the conference.This book will be of interest to all those interested in parallel computing today, and progress towards the exascale computing of tomorrow.
Download or read book Frontiers in High Energy Density Physics written by National Research Council and published by National Academies Press. This book was released on 2003-05-11 with total page 177 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recent scientific and technical advances have made it possible to create matter in the laboratory under conditions relevant to astrophysical systems such as supernovae and black holes. These advances will also benefit inertial confinement fusion research and the nation's nuclear weapon's program. The report describes the major research facilities on which such high energy density conditions can be achieved and lists a number of key scientific questions about high energy density physics that can be addressed by this research. Several recommendations are presented that would facilitate the development of a comprehensive strategy for realizing these research opportunities.
Download or read book Microscale Acoustofluidics written by Thomas Laurell and published by Royal Society of Chemistry. This book was released on 2014-12-08 with total page 593 pages. Available in PDF, EPUB and Kindle. Book excerpt: The manipulation of cells and microparticles within microfluidic systems using external forces is valuable for many microscale analytical and bioanalytical applications. Acoustofluidics is the ultrasound-based external forcing of microparticles with microfluidic systems. It has gained much interest because it allows for the simple label-free separation of microparticles based on their mechanical properties without affecting the microparticles themselves. Microscale Acoustofluidics provides an introduction to the field providing the background to the fundamental physics including chapters on governing equations in microfluidics and perturbation theory and ultrasound resonances, acoustic radiation force on small particles, continuum mechanics for ultrasonic particle manipulation, and piezoelectricity and application to the excitation of acoustic fields for ultrasonic particle manipulation. The book also provides information on the design and characterization of ultrasonic particle manipulation devices as well as applications in acoustic trapping and immunoassays. Written by leading experts in the field, the book will appeal to postgraduate students and researchers interested in microfluidics and lab-on-a-chip applications.
Download or read book Fluorescent Nanodiamonds written by Huan-Cheng Chang and published by John Wiley & Sons. This book was released on 2018-11-12 with total page 294 pages. Available in PDF, EPUB and Kindle. Book excerpt: The most comprehensive reference on fluorescent nanodiamond physical and chemical properties and contemporary applications Fluorescent nanodiamonds (FNDs) have drawn a great deal of attention over the past several years, and their applications and development potential are proving to be manifold and vast. The first and only book of its kind, Fluorescent Nanodiamonds is a comprehensive guide to the basic science and technical information needed to fully understand the fundamentals of FNDs and their potential applications across an array of domains. In demonstrating the importance of FNDs in biological applications, the authors bring together all relevant chemistry, physics, materials science and biology. Nanodiamonds are produced by powerful cataclysmic events such as explosions, volcanic eruptions and meteorite impacts. They also can be created in the lab by high-pressure high-temperature treatment of graphite or detonating an explosive in a reactor vessel. A single imperfection can give a nanodiamond a specific, isolated color center which allows it to function as a single, trapped atom. Much smaller than the thickness of a human hair, a nanodiamond can have a huge surface area that allows it to bond with a variety of other materials. Because of their non-toxicity, nanodiamonds may be useful in biomedical applications, such as drug delivery and gene therapy. The most comprehensive reference on a topic of rapidly increasing interest among academic and industrial researchers across an array of fields Includes numerous case studies and practical examples from many areas of research and industrial applications, as well as fascinating and instructive historical perspectives Each chapter addresses, in-depth, a single integral topic including the fundamental properties, synthesis, mechanisms and functionalisation of FNDs The first book published by the key patent holder with his research group in the field of FNDs Fluorescent Nanodiamonds is an important working resource for a broad range of scientists and engineers in industry and academia. It will also be a welcome reference for instructors in chemistry, physics, materials science, biology and related fields.
Download or read book Principles of Tissue Engineering written by Robert Lanza and published by Academic Press. This book was released on 2011-10-13 with total page 1344 pages. Available in PDF, EPUB and Kindle. Book excerpt: First published in 1997, Principles of Tissue Engineering is the widely recognized definitive resource in the field. The third edition provides a much needed update of the rapid progress that has been achieved in the field, combining the prerequisites for a general understanding of tissue growth and development, the tools and theoretical information needed to design tissues and organs, as well as a presentation by the world’s experts of what is currently known about each specific organ system. This edition includes greatly expanded focus on stem cells, including adult and embryonic stem cells and progenitor populations that may soon lead to new tissue engineering therapies for heart disease, diabetes, and a wide variety of other diseases that afflict humanity. This up-to-date coverage of stem cell biology and other emerging technologies is complemented by a series of new chapters on recent clinical experience in applying tissue engineering. The result is a comprehensive textbook that we believe will be useful to students and experts alike. New to this edition:*Includes new chapters on biomaterial-protein interactions, nanocomposite and three-dimensional scaffolds, skin substitutes, spinal cord, vision enhancement, and heart valves*Expanded coverage of adult and embryonic stem cells of the cardiovascular, hematopoietic, musculoskeletal, nervous, and other organ systems
Download or read book An Introduction to Reservoir Simulation Using MATLAB GNU Octave written by Knut-Andreas Lie and published by Cambridge University Press. This book was released on 2019-08-08 with total page 677 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presents numerical methods for reservoir simulation, with efficient implementation and examples using widely-used online open-source code, for researchers, professionals and advanced students. This title is also available as Open Access on Cambridge Core.
Download or read book Particle Size Distribution III written by Theodore Provder and published by . This book was released on 1998 with total page 376 pages. Available in PDF, EPUB and Kindle. Book excerpt: Particle size and distribution are key factors in assessing polymer chains. This volume examines a variety of recent measuring techniques, including static and dynamic light scattering methods, fractionation methods, and electrophoretic and electroacoustic separation.
Download or read book Theoretical Microfluidics written by Henrik Bruus and published by Oxford University Press. This book was released on 2007-09-27 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Microfluidics is a young and rapidly expanding scientific discipline, which deals with fluids and solutions in miniaturized systems, the so-called lab-on-a-chip systems. It has applications in chemical engineering, pharmaceutics, biotechnology and medicine. As the lab-on-a-chip systems grow in complexity, a proper theoretical understanding becomes increasingly important. The basic idea of the book is to provide a self-contained formulation of the theoretical framework of microfluidics, and at the same time give physical motivation and examples from lab-on-a-chip technology. After three chapters introducing microfluidics, the governing equations for mass, momentum and energy, and some basic flow solutions, the following 14 chapters treat hydraulic resistance/compliance, diffusion/dispersion, time-dependent flow, capillarity, electro- and magneto-hydrodynamics, thermal transport, two-phase flow, complex flow patterns and acousto-fluidics, as well as the new fields of opto- and nano-fluidics. Throughout the book simple models with analytical solutions are presented to provide the student with a thorough physical understanding of order of magnitudes and various selected microfluidic phenomena and devices. The book grew out of a set of well-tested lecture notes. It is with its many pedagogical exercises designed as a textbook for an advanced undergraduate or first-year graduate course. It is also well suited for self-study.
