Download or read book Particle Dispersion and Deposition in Multiphase Turbulence Flow written by Md Alamgir Hossain and published by LAP Lambert Academic Publishing. This book was released on 2012 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Two separate studies: a comprehensive 3D CFD investigation for multiparticles in turbulence flow and an extended analytical model for liquid-solid phase are presented in this book. CFD investigation was carried out to predict the hydrodynamic behavior of turbid particle flowing through a horizontal pipe networks including loop consist of bends and straight pipes. Furthermore, the extended analytical model was also re-developed for the liquid-solid system to look at the similar behavior of the solid particles flowing in a turbulent field. These two parallel studies will provide better understandings about the turbidity spikes movements in the drinking water distribution networks. This book is design for the lay reader to advance researcher. Lay readers will get information about CFD modelling and particle modelling technique and the researcher will be benefited in turbulent diffusion modelling and multiphase-multiparticle modelling.

Download or read book Particle Dispersion and Deposition in Multiphase Turbulence Flow written by Md Alamgir Hossain and published by LAP Lambert Academic Publishing. This book was released on 2012-07 with total page 164 pages. Available in PDF, EPUB and Kindle. Book excerpt: Two separate studies: a comprehensive 3D CFD investigation for multiparticles in turbulence flow and an extended analytical model for liquid-solid phase are presented in this book. CFD investigation was carried out to predict the hydrodynamic behavior of turbid particle flowing through a horizontal pipe networks including loop consist of bends and straight pipes. Furthermore, the extended analytical model was also re-developed for the liquid-solid system to look at the similar behavior of the solid particles flowing in a turbulent field. These two parallel studies will provide better understandings about the turbidity spikes movements in the drinking water distribution networks. This book is design for the lay reader to advance researcher. Lay readers will get information about CFD modelling and particle modelling technique and the researcher will be benefited in turbulent diffusion modelling and multiphase-multiparticle modelling.

Download or read book Particles in Wall Bounded Turbulent Flows Deposition Re Suspension and Agglomeration written by Jean-Pierre Minier and published by Springer. This book was released on 2016-07-26 with total page 268 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book presents an up-to-date review of turbulent two-phase flows with the dispersed phase, with an emphasis on the dynamics in the near-wall region. New insights to the flow physics are provided by direct numerical simuation and by fine experimental techniques. Also included are models of particle dynamics in wall-bounded turbulent flows, and a description of particle surface interactions including muti-layer deposition and re-suspension.

Download or read book IUTAM Symposium on Computational Approaches to Multiphase Flow written by S. Balachandar and published by Springer Science & Business Media. This book was released on 2007-01-28 with total page 443 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book provides a broad overview of the full spectrum of state-of-the-art computational activities in multiphase flow as presented by top practitioners in the field. It starts with well-established approaches and builds up to newer methods. These methods are illustrated with applications to a broad spectrum of problems involving particle dispersion and deposition, turbulence modulation, environmental flows, fluidized beds, bubbly flows, and many others.

Download or read book New Approaches in Modeling Multiphase Flows and Dispersion in Turbulence Fractal Methods and Synthetic Turbulence written by F.C.G.A. Nicolleau and published by Springer Science & Business Media. This book was released on 2011-10-29 with total page 159 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains a collection of the main contributions from the first five workshops held by Ercoftac Special Interest Group on Synthetic Turbulence Models (SIG42. It is intended as an illustration of the sig’s activities and of the latest developments in the field. This volume investigates the use of Kinematic Simulation (KS) and other synthetic turbulence models for the particular application to environmental flows. This volume offers the best syntheses on the research status in KS, which is widely used in various domains, including Lagrangian aspects in turbulence mixing/stirring, particle dispersion/clustering, and last but not least, aeroacoustics. Flow realizations with complete spatial, and sometime spatio-temporal, dependency, are generated via superposition of random modes (mostly spatial, and sometime spatial and temporal, Fourier modes), with prescribed constraints such as: strict incompressibility (divergence-free velocity field at each point), high Reynolds energy spectrum. Recent improvements consisted in incorporating linear dynamics, for instance in rotating and/or stably-stratified flows, with possible easy generalization to MHD flows, and perhaps to plasmas. KS for channel flows have also been validated. However, the absence of "sweeping effects" in present conventional KS versions is identified as a major drawback in very different applications: inertial particle clustering as well as in aeroacoustics. Nevertheless, this issue was addressed in some reference papers, and merits to be revisited in the light of new studies in progress.

Download or read book Stochastic Lagrangian Modeling for Large Eddy Simulation of Dispersed Turbulent Two Phase Flows written by Abdallah Sofiane Berrouk and published by Bentham Science Publishers. This book was released on 2011 with total page 130 pages. Available in PDF, EPUB and Kindle. Book excerpt: Understanding the dispersion and the deposition of inertial particles convected by turbulent flows is a domain of research of considerable industrial interest. Inertial particle transport and dispersion are encountered in a wide range of flow configurations, whether they are of industrial or environmental character. Conventional models for turbulent dispersed flows do not appear capable of meeting the growing needs of chemical, mechanical and petroleum industries in this regard and physical environment testing is prohibitive. Direct Numerical Simulation (DNS) and Large Eddy Simulation (LES) ha.

Download or read book Multiphase Particulate Systems in Turbulent Flows written by Wioletta Podgórska and published by CRC Press. This book was released on 2019-09-17 with total page 482 pages. Available in PDF, EPUB and Kindle. Book excerpt: Multiphase Particulate Systems in Turbulent Flows: Fluid-Liquid and Solid-Liquid Dispersions provides methods necessary to analyze complex particulate systems and related phenomena including physical, chemical and mathematical description of fundamental processes influencing crystal size and shape, suspension rheology, interfacial area of drops and bubbles in extractors and bubble columns. Examples of mathematical model formulation for different processes taking place in such systems is shown. Discussing connections between turbulent mixing mechanisms and precipitation, it discusses influence of fine-scale structure of turbulence, including its intermittent character, on breakage of drops, bubbles, cells, plant cell aggregates. An important aspect of the mathematical modeling presented in the book is multi-fractal, taking into account the influence of internal intermittency on different phenomena. Key Features Provides detailed descriptions of dispersion processes in turbulent flow, interactions between dispersed entities, and continuous phase in a single volume Includes simulation models and validation experiments for liquid-liquid, gas-liquid, and solid-liquid dispersions in turbulent flows Helps reader learn formulation of mathematical models of breakage or aggregation processes using multifractal theory Explains how to solve different forms of population balance equations Presents a combination of theoretical and engineering approaches to particulate systems along with discussion of related diversity, with exercises and case studies

Download or read book Dispersion and Deposition of Heavy Particles in Turbulent Flows written by Chunyu Jin and published by . This book was released on 2012 with total page 244 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Particles in Turbulent Flows written by Leonid I. Zaichik and published by John Wiley & Sons. This book was released on 2008-12-04 with total page 318 pages. Available in PDF, EPUB and Kindle. Book excerpt: The only work available to treat the theory of turbulent flow with suspended particles, this book also includes a section on simulation methods, comparing the model results obtained with the PDF method to those obtained with other techniques, such as DNS, LES and RANS. Written by experienced scientists with background in oil and gas processing, this book is applicable to a wide range of industries -- from the petrol industry and industrial chemistry to food and water processing.

Download or read book Particle Dispersion and Deposition in Horizontal Turbulent Channel and Tube Flows written by Bernard Marie Mols and published by . This book was released on 1999 with total page 160 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Multiphase Particulate Systems in Turbulent Flows written by Wioletta Podgórska and published by CRC Press. This book was released on 2019-09-17 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: Multiphase Particulate Systems in Turbulent Flows: Fluid-Liquid and Solid-Liquid Dispersions provides methods necessary to analyze complex particulate systems and related phenomena including physical, chemical and mathematical description of fundamental processes influencing crystal size and shape, suspension rheology, interfacial area of drops and bubbles in extractors and bubble columns. Examples of mathematical model formulation for different processes taking place in such systems is shown. Discussing connections between turbulent mixing mechanisms and precipitation, it discusses influence of fine-scale structure of turbulence, including its intermittent character, on breakage of drops, bubbles, cells, plant cell aggregates. An important aspect of the mathematical modeling presented in the book is multi-fractal, taking into account the influence of internal intermittency on different phenomena. Key Features Provides detailed descriptions of dispersion processes in turbulent flow, interactions between dispersed entities, and continuous phase in a single volume Includes simulation models and validation experiments for liquid-liquid, gas-liquid, and solid-liquid dispersions in turbulent flows Helps reader learn formulation of mathematical models of breakage or aggregation processes using multifractal theory Explains how to solve different forms of population balance equations Presents a combination of theoretical and engineering approaches to particulate systems along with discussion of related diversity, with exercises and case studies

Download or read book Modeling of Gas to Particle Mass Transfer in Turbulent Flows written by Sean C. Garrick and published by Springer. This book was released on 2017-06-29 with total page 71 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Brief focuses on the dispersion of high-porosity particles, their entrainment into the vapor-laden stream, and the condensation of vapor onto the particles. The authors begin with a simple/static problem, focusing on transport within the particle. They go on to consider the high-resolution simulation of particles in a turbulent flow and the time-dependent evolution of the fluid-particle fields. Finally, they examine the more computationally-affordable large-eddy simulation of gas-to-particle mass-transfer. The book ends with a summary and challenges as well as directions for the area.

Download or read book Solid particles Deposition Through a Turbulent Impinging Jet Using Lattice Boltzmann Method written by Ali Abdulkadhim and published by . This book was released on 2018 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Solid particle distribution on an impingement surface has been simulated utilizing a graphical processing unit (GPU). An in-house computational fluid dynamics (CFD) code has been developed to investigate a 3D turbulent impinging jet using the lattice Boltzmann method (LBM) in conjunction with large eddy simulation (LES) and the multiple relaxation time (MRT) models. This work proposed an improvement in the LBM-cellular automata (LBM-CA) probabilistic method. In the current model, the fluid flow utilizes the D3Q19 LBM lattice model, while the particles movement employs the D3Q27 one. The particle numbers are defined at the same regular LBM (fluid) nodes, and the transport of particles from one node to its neighbouring nodes are determined in accordance with the particle bulk density and velocity by considering all the external forces. The previous CA models distribute particles at each time step without considering the local particles number and velocity at each node. The present model overcomes the deficiencies of the previous LBM-CA models and, therefore, can better capture the dynamic interaction between particles and the surrounding turbulent flow field. Despite increasing popularity of the LBM-MRT model in simulating complex multiphase fluid flows, this approach is still expensive in term of memory size and computational time required to perform 3D simulations. To improve the throughput of simulations, a single GeForce GTX TITAN X GPU is used in the present work. The CUDA parallel programming platform and the CuRAND library are utilized to form an efficient LBM-MRT-CA algorithm. The LBM-MRT fluid (i.e. no particles) model results were compared with two benchmark test cases ones. The first case is a turbulent free square jet, and the second one is a circular turbulent impinging jet for L/D=2 at Reynolds number equals to 25,000, where L is the nozzle-to-surface distance and D is the jet diameter. The LBM-CA simulation methodology was first validated against a benchmark test case involving particle deposition on a square cylinder confined in a duct. The flow was unsteady and laminar at Re=200 (Re is the Reynolds number), and simulations were conducted for different Stokes numbers. The GPU code was then used to simulate the particle transport and deposition in a turbulent impinging jet at Re=10,000. The effect of changing Stokes number on the particle deposition profile was studied at different L/D ratios, i.e. L/D=2, 4, and 6. The current model was finally used to simulate the particle impaction pattern from a circular jet for L/D=0.5, where the effect of changing Stokes and Reynolds numbers on the particle transport and deposition was examined. The present LBM-CA solutions agree well with other results available in the open literature. For comparative studies, another in-house serial CPU code was also developed, coupling LBM with the classical Lagrangian particle dispersion model. Agreement between results obtained with LBM-CA and LBM-Lagrangian models and the experimental data for the impinging jet case of L/D=0.5 is generally good, and the present LBM-CA approach on GPU achieves a speedup ratio of about 150 against the serial code running on a single CPU. Another new model was proposed to incorporate the solid particle phase effect (i.e. two-way coupling) on the fluid flow. The LMB-Lagrangian approach was used in this model to track solid particles in the computational domain. The solid particle phase was considered as a porous medium moving in the computational domain. The impact of the porous medium (i.e. the solid particle phase) on the fluid flow characteristics (e.g. fluid velocity) is a function of the particle phase volume fraction and velocity in the LBM. Particle-particle collision (i.e. four-way coupling) was also considered in this model by utilizing the discrete element method (DEM). This approach can numerically capture the multi-particle collision behaviours in dense particle suspension problems. This model data were compared with the numerical study ones for a single bubble injected in a fluidized bed, and the results of the bubble diameters at different injection velocity were in good agreement.

Download or read book Fundamentals of Dispersed Multiphase Flows written by S. Balachandar and published by Cambridge University Press. This book was released on 2024-03-28 with total page 676 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dispersed multiphase flows are frequently found in nature and have diverse geophysical, environmental, industrial, and energy applications. This book targets a beginning graduate student looking to learn about the physical processes that govern these flows, going from the fundamentals to the state of the art, with many exercises included.

Download or read book Proceedings of the IUTAM Symposium on Turbulent Structure and Particles Turbulence Interaction written by Xiaojing Zheng and published by Springer Nature. This book was released on 2024-01-02 with total page 349 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the proceedings of the 'IUTAM Symposium on Turbulent Structure and Particles' held in 2023. It provides a comprehensive overview of the latest research and developments in the field of turbulent dispersed multiphase flows. The book features contributions from experts in academia and industry, covering a range of topics including droplet and pollutant dispersion, sand/dust storms, sediment transport in water or air flows, fluidized beds, bubbly flows and more. The content is a valuable reference for researchers, engineers, and students who are interested in understanding the complex behavior of multiphase flows in different natural and industrial environments.

Download or read book Turbulence Modification in Multiphase Flows written by and published by . This book was released on 1991 with total page 148 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Modeling Turbulent Dispersion and Deposition of Airborne Particles in High Temperature Pipe Flows written by Pritheesh Gnanaselvam and published by . This book was released on 2020 with total page 140 pages. Available in PDF, EPUB and Kindle. Book excerpt: The simulations and experiments outlined are designed to explore the effect of existing turbulent dispersion models in predicting particle deposition characteristics at higher temperatures. The continuous phase solution was obtained from using a Reynolds-Averaged Navier Stokes (RANS) turbulence model and the turbulent dispersion was modeled using a Continuous Random Walk (CRW) model. Euler-Maruyama scheme was implemented to solve the non-dimensional Langevin equation to model the stochastic nature of the equation appropriately. Previous studies have shown that the particle deposition characteristics depend greatly on the time step of integration. With the Euler-Maruyama scheme, the CFD results were shown to be less sensitive to the time step of integration and with decrease in time step more stable results were obtained. Direct comparison with the Discrete Random Walk (DRW) model shows that DRW fails to predict flow fluctuations seen by particles in the diffusion-impaction regime. Previous studies of this phenomenon were all performed at ambient conditions. The CRW model was shown to predict impact velocities reasonably well, when the chosen time step of integrations is such that the stochastic and damping term are comparable in magnitude. Presented here are pipe-flow experiments conducted in the High Temperature Deposition Facility (HTDF) with a mean jet velocity of 150 m/s – 200 m/s with exit centerline temperature of 1525K to assess the capability of CRW in predicting particle deposition characteristics at high temperatures. The flow temperature was chosen in such a way that the temperature inside the pipe at any point is higher than the melting point of dust used, so that an `all stick’ condition can be used to model particle-wall interactions. The derivation and the effect of the drift correction and the stochastic terms in the normalized Langevin equation were discussed in detail. Simulations were performed trying to reproduce experimental results with and without injection line. The CFD model without injection line was shown to follow the predicted pipe deposition based on the effective drift correction, whereas the CFD model with injection line did not show significant change in pipe deposition results with velocity. CFD results using the OSU-CRW model posited that the model is more appropriate for turbulent pipe flows in the fully developed region.