EBookClubs

Read Books & Download eBooks Full Online

EBookClubs

Read Books & Download eBooks Full Online

Book Partial Oxidation of Methane Over Noble Metal Catalysts

Download or read book Partial Oxidation of Methane Over Noble Metal Catalysts written by Paul Mikael Torniainen and published by . This book was released on 1994 with total page 160 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Book Non steady Behaviour in the Oxidation of Methane Over Supported Noble metal Catalysts

Download or read book Non steady Behaviour in the Oxidation of Methane Over Supported Noble metal Catalysts written by You Quan Deng and published by . This book was released on 1996 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Book The Catalytic Combustion of Methane Over Supported Noble Metal Catalysts

Download or read book The Catalytic Combustion of Methane Over Supported Noble Metal Catalysts written by Michael Gerard McGrath and published by . This book was released on 1995 with total page 178 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Book In Situ Infared  i e  Infrared  Studies of Catalytic Partial Oxidation

Download or read book In Situ Infared i e Infrared Studies of Catalytic Partial Oxidation written by Chundi Cao and published by . This book was released on 2008 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Catalytic partial oxidation (CPO) has received considerable interest recently both as a way to utilize remote natural gas resources and to provide H[subscript]2 for a fuel cell. Studies on the reactions at lower temperatures and transient conditions were performed, which can provide insights on the mechanism of CPO at high reactions, particularly on the role of the chemical and physical state of the noble metal catalyst. In this work, ignition of methane CPO on Pt/Al[subscript]2O[subscript]3 and Rh/Al[subscript]2O[subscript]3 catalysts and methanol CPO on Pt/Al[subscript]2O[subscript]3 catalysts were studied using in situ diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS). The ignition mechanism study of CH4 on Pt/Al[subscript]2O[subscript]3 showed that oxygen mainly covers the surface until ignition. Competition between the two reactants is assumed. The heat of adsorption of oxygen is a key factor for ignition of the methane partial oxidation reaction on Pt/Al[subscript]2O[subscript]3. The ignition mechanism on Rh/Al[subscript]2O[subscript]3 was found to be different from Pt/Al[subscript]2O[subscript]3. The oxidation state of the catalyst changed significantly as the temperature was raised towards the ignition. An oxidized rhodium state, Rh[superscript]n+, progressively formed as the temperature was increased while Rh[superscript]0 decreased. In addition, a greater amount of Rh[supercript]n+ was found when the oxygen concentration in the feed was higher. From these results, it is hypothesized that ignition of methane CPO on Rh/Al[subscript]2O[subscript]3 is related to the accumulation of the Rh[superscript]n+ state. Dissociation adsorption of methanol occurs on both Al2O3 and Pt/Al[subscript]2O[subscript]3. It is suggested that formate was one of the important intermediates in the reaction pathway. Oxygen species play a key role in the formation of formate on the catalysts, and it also affects the product composition. Formate mainly decomposed into CO, which is the dominant source for CO[subscript]2 production in the reactions at higher temperatures.

Book Supported Metals in Catalysis

Download or read book Supported Metals in Catalysis written by James Arthur Anderson and published by World Scientific. This book was released on 2012 with total page 581 pages. Available in PDF, EPUB and Kindle. Book excerpt: With contributions from experts in supported metal catalysis from both the industry and academia, this book presents the latest developments in characterization and application of supported metals in heterogeneous catalysis. In addition to thorough and updated coverage of the traditional aspects of heterogeneous catalysis such as preparation, characterization and use in well-established technologies such as vehicle emission control, the book also includes emerging areas where supported metal catalysis will make significant contributions to future developments, such as fuel cells and fine chemicals synthesis. The second edition of Supported Metals in Catalysis comes complete with new and updated chapters containing important summaries of research in a rapidly evolving field. Very few other books deal with this highly pertinent subject matter and, as such, it is a must-have for anyone working in the field of heterogeneous catalysis.

Book Low Temperature Methane Steam Reforming Over Supported Noble Metal Catalysts

Download or read book Low Temperature Methane Steam Reforming Over Supported Noble Metal Catalysts written by Robert Hugo Fitzburgh and published by . This book was released on 1987 with total page 396 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Book Synthesis Gas Formation by Partial Oxidation of Methane Over Metal Catalyst

Download or read book Synthesis Gas Formation by Partial Oxidation of Methane Over Metal Catalyst written by J. Nakamura and published by . This book was released on 1991 with total page 10 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Book Methane Conversion

Download or read book Methane Conversion written by D.M. Bibby and published by Elsevier. This book was released on 1988-03-01 with total page 759 pages. Available in PDF, EPUB and Kindle. Book excerpt: This proceedings volume comprises the invited plenary lectures, contributed and poster papers presented at a symposium organised to mark the successful inauguration of the world's first commercial plant for production of gasoline from natural gas, based on the Mobil methanol-to-gasoline process. The objectives of the Symposium were to present both fundamental research and engineering aspects of the development and commercialization of gas-to-gasoline processes. These include steam reforming, methanol synthesis and methanol-to-gasoline. Possible alternative processes e.g. MOGD, Fischer-Tropsch synthesis of hydrocarbons, and the direct conversion of methane to higher hydrocarbons were also considered.The papers in this volume provide a valuable and extremely wide-ranging overview of current research into the various options for natural gas conversion, giving a detailed description of the gas-to-gasoline process and plant. Together, they represent a unique combination of fundamental surface chemistry catalyst characterization, reaction chemistry and engineering scale-up and commercialization.

Book Partial Oxidation of Methane and Ethane Over Metal Oxide Catalysts

Download or read book Partial Oxidation of Methane and Ethane Over Metal Oxide Catalysts written by Dingjun Wang and published by . This book was released on 1995 with total page 448 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Book Deactivation Studies of Noble Metal Catalysts for Lean Methane Combustion

Download or read book Deactivation Studies of Noble Metal Catalysts for Lean Methane Combustion written by Georgeta M. Istratescu and published by . This book was released on 2014 with total page 233 pages. Available in PDF, EPUB and Kindle. Book excerpt: Green House Gases (GHG) contribution to global warming has led to extensive research into reduction of emission of the GHG. Transportation, as a main contributor to GHG, faces a major challenge in researching and developing of new technologies with the aim of reducing the carbon foot print. The use of alternative fuels with lower harmful emissions became obvious as a result of emission control regulations and climate change. Natural gas engines gained popularity due to their ability to burn the fuel almost completely, which recommends them as an environmentally friendly alternative to fossil fuels engines. However, the incomplete combustion of methane in natural gas engines will release methane and carbon monoxide into the atmosphere. The fugitive methane emission problem can be tackled by the development of performant catalytic converters. This project reports on catalytic activity and stability of three sets of catalyst. The first set, palladium only catalysts provided by 15, 80 and 150 g/ft3 loading, were designed for methane combustion but not necessarily for lean burn engines. The second set studied were 2 catalysts: Pt and Pt-Pd (4:1) catalyst, with a loading of 95 g/ft3. Their mainly intend was the use as diesel oxidation catalysts. The third set of catalytic converters was designed for use for lean burn gas engines. The catalysts studied were Pt-Pd (1:5) with a loading of 150 g/ft3, Pd 122 (122 g/ft3), Pd Rh (117.15:2.85) (loading 120 g/ft3) and PtPdRh (19:73:2.85) with a loading of 94.85 g/ft3. The influence of different pretreatments on the catalyst activity (i.e. de-greening temperature, reduction process) were studied through ignition-extinction experiments. The stability of the catalyst was investigated through thermal ageing experiments. The effect of water on the catalytic activity was investigated through hydro-thermal ageing experiments.

Book Natural Gas Conversion V

Download or read book Natural Gas Conversion V written by A. Parmaliana and published by Elsevier. This book was released on 1998-09-17 with total page 1005 pages. Available in PDF, EPUB and Kindle. Book excerpt: On January 1988, the ascertained and economically accessible reserves of Natural Gas (NG) amounted to over 144,000 billion cubic meters worldwide, corresponding to 124 billion tons of oil equivalents (comparable with the liquid oil reserves, which are estimated to be 138 billion TOE). It is hypothesized that the volume of NG reserve will continue to grow at the same rate of the last decade. Forecasts on production indicate a potential increase from about 2,000 billion cubic meters in 1990 to not more than 3,300 billion cubic meters in 2010, even in a high economic development scenario. NG consumption represents only one half of oil: 1.9 billion TOE/y as compared to 3.5 of oil. Consequently, in the future gas will exceed oil as a carbon atom source. In the future the potential for getting energetic vectors or petrochemicals from NG will continue to grow.The topics covered in Natural Gas Conversion V reflect the large global R&D effort to look for new and economic ways of NG exploitation. These range from the direct conversion of methane and light paraffins to the indirect conversion through synthesis gas to fuels and chemicals. Particularly underlined and visible are the technologies already commercially viable.These proceedings prove that mature and technologically feasible processes for natural gas conversion are already available and that new and improved catalytic approaches are currently developing, the validity and feasibility of which will soon be documented. This is an exciting area of modern catalysis, which will certainly open novel and rewarding perspectives for the chemical, energy and petrochemical industries.

Book The Selectivity of Oxidation Reactions Over Catalytic Monoliths

Download or read book The Selectivity of Oxidation Reactions Over Catalytic Monoliths written by Daniel Alan Hickman and published by . This book was released on 1992 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Book Fuel Cells  Technologies for Fuel Processing

Download or read book Fuel Cells Technologies for Fuel Processing written by Dushyant Shekhawat and published by Elsevier. This book was released on 2011-03-18 with total page 569 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fuel Cells: Technologies for Fuel Processing provides an overview of the most important aspects of fuel reforming to the generally interested reader, researcher, technologist, teacher, student, or engineer. The topics covered include all aspects of fuel reforming: fundamental chemistry, different modes of reforming, catalysts, catalyst deactivation, fuel desulfurization, reaction engineering, novel reforming concepts, thermodynamics, heat and mass transfer issues, system design, and recent research and development. While no attempt is made to describe the fuel cell itself, there is sufficient description of the fuel cell to show how it affects the fuel reformer. By focusing on the fundamentals, this book aims to be a source of information now and in the future. By avoiding time-sensitive information/analysis (e.g., economics) it serves as a single source of information for scientists and engineers in fuel processing technology. The material is presented in such a way that this book will serve as a reference for graduate level courses, fuel cell developers, and fuel cell researchers. - Chapters written by experts in each area - Extensive bibliography supporting each chapter - Detailed index - Up-to-date diagrams and full colour illustrations