Download or read book Partial Analog Equalization and ADC Requirements in Wired Communications microform written by Amir Hadji-Abdolhamid and published by Library and Archives Canada = Bibliothèque et Archives Canada. This book was released on 2004 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt: High-speed high-resolution analog-to-digital converters (ADC) are one of the major bottlenecks in digital communication systems. Every extra bit requirement in a high-speed flash ADC roughly doubles the silicon area and power consumption of the chip and furthermore, complicates ADC design. This thesis investigates the ADC requirements for wired communication applications and presents an efficient partial analog equalization approach to reduce the front-end ADC resolution requirement. In contrast to a full-analog equalizer, a partial analog equalizer (PAE) partially equalizes the channel and is complemented by a digital equalizer. The contributions of this thesis include three major components: (1) An analytical study elaborates and quantifies the benefit of partial equalization in terms of ADC bit requirements. (2) It is shown that a fairly simple PAE circuit can yield most of the available advantage. (3) An implementation of a high-speed PAE/ADC, combined on a single 1.8-V CMOS chip, is demonstrated and the benefit of 2--3 bits improvement is verified, experimentally. Moreover, the optimization of PAE coefficients and the similarity of 2-tap PAE to an analog first-order decorrelator is investigated. The analytical discussions include studying the benefit of PAE in baseband systems with both feedforward and decision feedback equalizers. Similar benefits of PAE in a passband modulation system is also discussed as an appendix for future research direction. The target application for this thesis is 622 Mb/s over a 300-m coaxial cable for serial digital video data transmissions. The proposed PAE along with a 6-bit 400-MHz flash ADC was designed and fabricated in a 0.18-mum CMOS process. The fabricated chip consumes 106 mW of power with 34-dB SNDR at 250 MHz sampling clock. For a 400-Mb/s data transmission over a 240-m coaxial channel, experimental results showed an error performance improvement equivalent to an 8-bit-ADC system.

Download or read book Millimeter Wave Antennas Configurations and Applications written by Jaco du Preez and published by Springer. This book was released on 2016-06-20 with total page 165 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book comprehensively reviews the state of the art in millimeter-wave antennas, traces important recent developments and provides information on a wide range of antenna configurations and applications. While fundamental theoretical aspects are discussed whenever necessary, the book primarily focuses on design principles and concepts, manufacture, measurement techniques, and practical results. Each of the various antenna types scalable to millimeter-wave dimensions is considered individually, with coverage of leaky-wave and surface-wave antennas, printed antennas, integrated antennas, and reflector and lens systems. The final two chapters address the subject from a systems perspective, providing an overview of supporting circuitry and examining in detail diverse millimeter-wave applications, including high-speed wireless communications, radio astronomy, and radar. The vast amount of information now available on millimeter-wave systems can be daunting for researchers and designers entering the field. This book offers readers essential guidance, helping them to gain a thorough understanding based on the most recent research findings and serving as a sound basis for informed decision-making.

Download or read book CMOS Continuous Time Adaptive Equalizers for High Speed Serial Links written by Cecilia Gimeno Gasca and published by Springer. This book was released on 2014-09-22 with total page 164 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces readers to the design of adaptive equalization solutions integrated in standard CMOS technology for high-speed serial links. Since continuous-time equalizers offer various advantages as an alternative to discrete-time equalizers at multi-gigabit rates, this book provides a detailed description of continuous-time adaptive equalizers design - both at transistor and system levels-, their main characteristics and performances. The authors begin with a complete review and analysis of the state of the art of equalizers for wireline applications, describing why they are necessary, their types, and their main applications. Next, theoretical fundamentals of continuous-time adaptive equalizers are explored. Then, new structures are proposed to implement the different building blocks of the adaptive equalizer: line equalizer, loop-filters, power comparator, etc. The authors demonstrate the design of a complete low-power, low-voltage, high-speed, continuous-time adaptive equalizer. Finally, a cost-effective CMOS receiver which includes the proposed continuous-time adaptive equalizer is designed for 1.25 Gb/s optical communications through 50-m length, 1-mm diameter plastic optical fiber (POF).

Download or read book Nyquist AD Converters Sensor Interfaces and Robustness written by Arthur H.M. van Roermund and published by Springer Science & Business Media. This book was released on 2012-11-26 with total page 291 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is based on the 18 presentations during the 21st workshop on Advances in Analog Circuit Design. Expert designers provide readers with information about a variety of topics at the frontier of analog circuit design, including Nyquist analog-to-digital converters, capacitive sensor interfaces, reliability, variability, and connectivity. This book serves as a valuable reference to the state-of-the-art, for anyone involved in analog circuit research and development.

Download or read book Dissertation Abstracts International written by and published by . This book was released on 2005 with total page 794 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Advances in Communication Systems and Networks written by J. Jayakumari and published by Springer Nature. This book was released on 2020-06-13 with total page 837 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the selected peer-reviewed papers from the International Conference on Communication Systems and Networks (ComNet) 2019. Highlighting the latest findings, ideas, developments and applications in all areas of advanced communication systems and networking, it covers a variety of topics, including next-generation wireless technologies such as 5G, new hardware platforms, antenna design, applications of artificial intelligence (AI), signal processing and optimization techniques. Given its scope, this book can be useful for beginners, researchers and professionals working in wireless communication and networks, and other allied fields.

Download or read book Springer Handbook of Optical Networks written by Biswanath Mukherjee and published by Springer Nature. This book was released on 2020-10-15 with total page 1169 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook is an authoritative, comprehensive reference on optical networks, the backbone of today’s communication and information society. The book reviews the many underlying technologies that enable the global optical communications infrastructure, but also explains current research trends targeted towards continued capacity scaling and enhanced networking flexibility in support of an unabated traffic growth fueled by ever-emerging new applications. The book is divided into four parts: Optical Subsystems for Transmission and Switching, Core Networks, Datacenter and Super-Computer Networking, and Optical Access and Wireless Networks. Each chapter is written by world-renown experts that represent academia, industry, and international government and regulatory agencies. Every chapter provides a complete picture of its field, from entry-level information to a snapshot of the respective state-of-the-art technologies to emerging research trends, providing something useful for the novice who wants to get familiar with the field to the expert who wants to get a concise view of future trends.

Download or read book Design Modeling and Testing of Data Converters written by Paolo Carbone and published by Springer Science & Business Media. This book was released on 2013-10-05 with total page 428 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the a scientific discussion of the state-of-the-art techniques and designs for modeling, testing and for the performance analysis of data converters. The focus is put on sustainable data conversion. Sustainability has become a public issue that industries and users can not ignore. Devising environmentally friendly solutions for data conversion designing, modeling and testing is nowadays a requirement that researchers and practitioners must consider in their activities. This book presents the outcome of the IWADC workshop 2011, held in Orvieto, Italy.

Download or read book Wireless Communications Networking and Applications written by Qing-An Zeng and published by Springer. This book was released on 2015-10-28 with total page 1265 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is based on a series of conferences on Wireless Communications, Networking and Applications that have been held on December 27-28, 2014 in Shenzhen, China. The meetings themselves were a response to technological developments in the areas of wireless communications, networking and applications and facilitate researchers, engineers and students to share the latest research results and the advanced research methods of the field. The broad variety of disciplines involved in this research and the differences in approaching the basic problems are probably typical of a developing field of interdisciplinary research. However, some main areas of research and development in the emerging areas of wireless communication technology can now be identified. The contributions to this book are mainly selected from the papers of the conference on wireless communications, networking and applications and reflect the main areas of interest: Section 1 - Emerging Topics in Wireless and Mobile Computing and Communications; Section 2 - Internet of Things and Long Term Evolution Engineering; Section 3 - Resource Allocation and Interference Management; Section 4 - Communication Architecture, Algorithms, Modeling and Evaluation; Section 5 - Security, Privacy, and Trust; and Section 6 - Routing, Position Management and Network Topologies.

Download or read book Advanced Optical and Wireless Communications Systems written by Ivan B. Djordjevic and published by Springer Nature. This book was released on 2022-06-21 with total page 794 pages. Available in PDF, EPUB and Kindle. Book excerpt: The new edition of this popular textbook keeps its structure, introducing the advanced topics of: (i) wireless communications, (ii) free-space optical (FSO) communications, (iii) indoor optical wireless (IR) communications, and (iv) fiber-optics communications, but thoroughly updates the content for new technologies and practical applications. The author presents fundamental concepts, such as propagation principles, modulation formats, channel coding, diversity principles, MIMO signal processing, multicarrier modulation, equalization, adaptive modulation and coding, detection principles, and software defined transmission, first describing them and then following up with a detailed look at each particular system. The book is self-contained and structured to provide straightforward guidance to readers looking to capture fundamentals and gain theoretical and practical knowledge about wireless communications, free-space optical communications, and fiber-optics communications, all which can be readily applied in studies, research, and practical applications. The textbook is intended for an upper undergraduate or graduate level courses in fiber-optics communication, wireless communication, and free-space optical communication problems, an appendix with all background material needed, and homework problems. In the second edition, in addition to the existing chapters being updated and problems being inserted, one new chapter has been added, related to the physical-layer security thus covering both security and reliability issues. New material on 5G and 6G technologies has been added in corresponding chapters.

Download or read book Handbook of Diesel Engines written by Klaus Mollenhauer and published by Springer Science & Business Media. This book was released on 2010-06-22 with total page 632 pages. Available in PDF, EPUB and Kindle. Book excerpt: This machine is destined to completely revolutionize cylinder diesel engine up through large low speed t- engine engineering and replace everything that exists. stroke diesel engines. An appendix lists the most (From Rudolf Diesel’s letter of October 2, 1892 to the important standards and regulations for diesel engines. publisher Julius Springer. ) Further development of diesel engines as economiz- Although Diesel’s stated goal has never been fully ing, clean, powerful and convenient drives for road and achievable of course, the diesel engine indeed revolu- nonroad use has proceeded quite dynamically in the tionized drive systems. This handbook documents the last twenty years in particular. In light of limited oil current state of diesel engine engineering and technol- reserves and the discussion of predicted climate ogy. The impetus to publish a Handbook of Diesel change, development work continues to concentrate Engines grew out of ruminations on Rudolf Diesel’s on reducing fuel consumption and utilizing alternative transformation of his idea for a rational heat engine fuels while keeping exhaust as clean as possible as well into reality more than 100 years ago. Once the patent as further increasing diesel engine power density and was filed in 1892 and work on his engine commenced enhancing operating performance.

Download or read book Telecommunications Regulation Handbook written by Hank Intven and published by . This book was released on 2000 with total page 350 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Integrated Circuits for Analog Signal Processing written by Esteban Tlelo-Cuautle and published by Springer Science & Business Media. This book was released on 2012-07-27 with total page 327 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents theory, design methods and novel applications for integrated circuits for analog signal processing. The discussion covers a wide variety of active devices, active elements and amplifiers, working in voltage mode, current mode and mixed mode. This includes voltage operational amplifiers, current operational amplifiers, operational transconductance amplifiers, operational transresistance amplifiers, current conveyors, current differencing transconductance amplifiers, etc. Design methods and challenges posed by nanometer technology are discussed and applications described, including signal amplification, filtering, data acquisition systems such as neural recording, sensor conditioning such as biomedical implants, actuator conditioning, noise generators, oscillators, mixers, etc. Presents analysis and synthesis methods to generate all circuit topologies from which the designer can select the best one for the desired application; Includes design guidelines for active devices/elements with low voltage and low power constraints; Offers guidelines for selecting the right active devices/elements in the design of linear and nonlinear circuits; Discusses optimization of the active devices/elements for process and manufacturing issues of nanometer technology.

Download or read book Futuristic Communication and Network Technologies written by A. Sivasubramanian and published by Springer Nature. This book was released on 2021-10-11 with total page 1024 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents select proceedings of the International Conference on Futuristic Communication and Network Technologies (CFCNT 2020) conducted at Vellore Institute of Technology, Chennai. It covers various domains in communication engineering and networking technologies. This volume comprises of recent research in areas like optical communication, optical networks, optics and optical computing, emerging trends in photonics, MEMS and sensors, active and passive RF components and devices, antenna systems and applications, RF devices and antennas for microwave emerging technologies, wireless communication for future networks, signal and image processing, machine learning/AI for networks, internet of intelligent things, network security and blockchain technologies. This book will be useful for researchers, professionals, and engineers working in the core areas of electronics and communication.

Download or read book Modeling and Tools for Network Simulation written by Klaus Wehrle and published by Springer Science & Business Media. This book was released on 2010-09-22 with total page 547 pages. Available in PDF, EPUB and Kindle. Book excerpt: A crucial step during the design and engineering of communication systems is the estimation of their performance and behavior; especially for mathematically complex or highly dynamic systems network simulation is particularly useful. This book focuses on tools, modeling principles and state-of-the art models for discrete-event based network simulations, the standard method applied today in academia and industry for performance evaluation of new network designs and architectures. The focus of the tools part is on two distinct simulations engines: OmNet++ and ns-3, while it also deals with issues like parallelization, software integration and hardware simulations. The parts dealing with modeling and models for network simulations are split into a wireless section and a section dealing with higher layers. The wireless section covers all essential modeling principles for dealing with physical layer, link layer and wireless channel behavior. In addition, detailed models for prominent wireless systems like IEEE 802.11 and IEEE 802.16 are presented. In the part on higher layers, classical modeling approaches for the network layer, the transport layer and the application layer are presented in addition to modeling approaches for peer-to-peer networks and topologies of networks. The modeling parts are accompanied with catalogues of model implementations for a large set of different simulation engines. The book is aimed at master students and PhD students of computer science and electrical engineering as well as at researchers and practitioners from academia and industry that are dealing with network simulation at any layer of the protocol stack.

Download or read book Cybernetics Cognition and Machine Learning Applications written by Vinit Kumar Gunjan and published by Springer Nature. This book was released on 2021-03-30 with total page 439 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book includes the original, peer reviewed research articles from the 2nd International Conference on Cybernetics, Cognition and Machine Learning Applications (ICCCMLA 2020), held in August, 2020 at Goa, India. It covers the latest research trends or developments in areas of data science, artificial intelligence, neural networks, cognitive science and machine learning applications, cyber physical systems and cybernetics.

Download or read book Reconfigurable Intelligent Surface Empowered 6G written by Hongliang Zhang and published by Springer Nature. This book was released on 2021-05-29 with total page 260 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents novel RIS-Based Smart Radio techniques, targeting at achieving high-quality channel links in cellular communications via design and optimization of the RIS construction. Unlike traditional antenna arrays, three unique characteristics of the RIS will be revealed in this book. First, the built-in programmable configuration of the RIS enables analog beamforming inherently without extra hardware or signal processing. Second, the incident signals can be controlled to partly reflect and partly transmit through the RIS simultaneously, adding more flexibility to signal transmission. Third, the RIS has no digital processing capability to actively send signals nor any radio frequency (RF) components. As such, it is necessary to develop novel channel estimation and communication protocols, design joint digital and RIS-based analog beamforming schemes and perform interference control via mixed reflection and transmission. This book also investigates how to integrate the RIS to legacy communication systems. RIS techniques are further investigated in this book (benefited from its ability to actively shape the propagation environment) to achieve two types of wireless applications, i.e., RF sensing and localization. The influence of the sensing objectives on the wireless signal propagation can be potentially recognized by the receivers, which are then utilized to identify the objectives in RF sensing. Unlike traditional sensing techniques, RIS-aided sensing can actively customize the wireless channels and generate a favorable massive number of independent paths interacting with the sensing objectives. It is desirable to design RIS-based sensing algorithms, and optimize RIS configurations. For the second application, i.e., RIS aided localization, an RIS is deployed between the access point (AP) and users. The AP can then analyze reflected signals from users via different RIS configurations to obtain accurate locations of users. However, this is a challenging task due to the dynamic user topology, as well as the mutual influence between multiple users and the RIS. Therefore, the operations of the RIS, the AP, and multiple users need to be carefully coordinated. A new RIS-based localization protocol for device cooperation and an RIS configuration optimization algorithm are also required. This book targets researchers and graduate-level students focusing on communications and networks. Signal processing engineers, computer and information scientists, applied mathematicians and statisticians, who work in RIS research and development will also find this book useful.