Download or read book Parametric Modeling with UGS NX 6 written by Randy H. Shih and published by . This book was released on 2008-09 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Primary Goal of Parametric Modeling with UGS NX 6 is to introduce the aspects of designing with Solid Modeling and Parametric Modeling. This text uses UGS NX as the modeling tool and the chapters guide you from constructing basic solid models to building intelligent mechanical designs, creating multi-view drawings and assembly models. This text takes a hands-on, exercise-intensive approach to all the important Parametric Modeling techniques and concepts. This textbook contains a series of ten tutorial style lessons designed to introduce beginning CAD users to UGS NX. Each lesson introduces a new set of commands and concepts, building on previous lessons.
Download or read book Parametric Modeling with Siemens NX Spring 2020 Edition written by Randy Shih and published by SDC Publications. This book was released on 2020-06-08 with total page 506 pages. Available in PDF, EPUB and Kindle. Book excerpt: The primary goal of Parametric Modeling with Siemens NX is to introduce the aspects of designing with Solid Modeling and Parametric Modeling. This text is intended to be used as a practical training guide for students and professionals. This text uses Siemens NX as the modeling tool, and the chapters proceed in a pedagogical fashion to guide you from constructing basic solid models to building intelligent mechanical designs, creating multi-view drawings and assembly models. This text takes a hands-on, exercise-intensive approach to all the important Parametric Modeling techniques and concepts. This textbook contains a series of fifteen tutorial style lessons designed to introduce beginning CAD users to NX. This text is also helpful to NX users upgrading from a previous release of the software. The solid modeling techniques and concepts discussed in this text are also applicable to other parametric feature-based CAD packages. The basic premise of this book is that the more designs you create using NX, the better you learn the software. With this in mind, each lesson introduces a new set of commands and concepts, building on previous lessons. This book does not attempt to cover all of NX’s features, only to provide an introduction to the software. It is intended to help you establish a good basis for exploring and growing in the exciting field of Computer Aided Engineering. This book also introduces you to the general principles of 3D printing including a brief history of 3D printing, the types of 3D printing technologies, commonly used filaments, and the basic procedure for printing a 3D model. 3D printing makes it easier than ever for anyone to start turning their designs into physical objects, and by the end of this book you will be ready to start printing out your own designs.
Download or read book Parametric Modeling with UGS NX 4 written by Randy H. Shih and published by . This book was released on 2006-11 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Primary Goal of Parametric Modeling with UGS NX 4 is to introduce the aspects of designing with Solid Modeling and Parametric Modeling. This Text uses UGS NX as the modeling tool and the chapters guide you from constructing basic solid models to building intelligent mechanical designs, creating multi-view drawings and assembly models. This Text takes a hands-on, exercise-intensive approach to all the important Parametric Modeling techniques and concepts. This textbook contains a series of ten tutorial style lessons designed to introduce beginning CAD users to UGS NX. Each lesson introduces a new set of commands and concepts, building on previous lessons. Table of Contents 1. Introduction: GETTING STARTED 2. Parametric Modeling Fundamentals 3. Constructive Solid Geometry Concepts 4. Model History Tree 5. Parametric Constraints Fundamentals 6. Geometric Construction Tools 7. Parent/Child Relationships 8. Part Drawings and Associative Functionality 9. Datum Features and Auxiliary Views 10. Symmetrical Features in Designs 11. Advanced 3D Construction Tools 12. Assembly Modeling - Putting It All Together Index
Download or read book Parametric Modeling with Siemens NX 2212 Series written by Randy Shih and published by SDC Publications. This book was released on with total page 511 pages. Available in PDF, EPUB and Kindle. Book excerpt: • Designed specifically for beginners with no prior CAD experience • Uses a hands-on, exercise-intensive, tutorial style approach • Covers parametric modeling, 3D Modeling, sheet metal design, assembly modeling, multiview drawings and more • Includes chapters introducing you to 3D printing, advanced assembly modeling and animation The primary goal of Parametric Modeling with Siemens NX is to introduce the aspects of designing with Solid Modeling and Parametric Modeling. This text is intended to be used as a practical training guide for students and professionals. This text uses Siemens NX as the modeling tool, and the chapters proceed in a pedagogical fashion to guide you from constructing basic solid models to building intelligent mechanical designs, creating multi-view drawings and assembly models. This text takes a hands-on, exercise-intensive approach to all the important Parametric Modeling techniques and concepts. This textbook contains a series of fifteen tutorial style lessons designed to introduce beginning CAD users to NX. This text is also helpful to NX users upgrading from a previous release of the software. The solid modeling techniques and concepts discussed in this text are also applicable to other parametric feature-based CAD packages. The basic premise of this book is that the more designs you create using NX, the better you learn the software. With this in mind, each lesson introduces a new set of commands and concepts, building on previous lessons. This book does not attempt to cover all of NX’s features, only to provide an introduction to the software. It is intended to help you establish a good basis for exploring and growing in the exciting field of Computer Aided Engineering. This book also introduces you to the general principles of 3D printing including a brief history of 3D printing, the types of 3D printing technologies, commonly used filaments, and the basic procedure for printing a 3D model. 3D printing makes it easier than ever for anyone to start turning their designs into physical objects, and by the end of this book you will be ready to start printing out your own designs.
Download or read book Parametric Modeling with UGS NX5 written by Randy Shih and published by . This book was released on 2007-08 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Primary Goal of Parametric Modeling with UGS NX 5 is to introduce the aspects of designing with Solid Modeling and Parametric Modeling. This text uses UGS NX as the modeling tool and the chapters guide you from constructing basic solid models to building intelligent mechanical designs, creating multi-view drawings and assembly models. This text takes a hands-on, exercise-intensive approach to all the important Parametric Modeling techniques and concepts. This book contains a series of ten tutorial style lessons designed to introduce beginning CAD users to UGS NX. Each lesson introduces a new set of commands and concepts, building on previous lessons.
Download or read book Parametric Modeling with NX 9 written by Randy Shih and published by SDC Publications. This book was released on 2014 with total page 437 pages. Available in PDF, EPUB and Kindle. Book excerpt: The primary goal of Parametric Modeling with NX 9 is to introduce the aspects of designing with Solid Modeling and Parametric Modeling. This text is intended to be used as a practical training guide for students and professionals. This text uses NX 9 as the modeling tool, and the chapters proceed in a pedagogical fashion to guide you from constructing basic solid models to building intelligent mechanical designs, creating multi-view drawings and assembly models. This text takes a hands-on, exercise-intensive approach to all the important Parametric Modeling techniques and concepts. This textbook contains a series of thirteen tutorial style lessons designed to introduce beginning CAD users to NX. This text is also helpful to NX users upgrading from a previous release of the software. The solid modeling techniques and concepts discussed in this text are also applicable to other parametric feature-based CAD packages. The basic premise of this book is that the more designs you create using NX, the better you learn the software. With this in mind, each lesson introduces a new set of commands and concepts, building on previous lessons. This book does not attempt to cover all of the NX’s features, only to provide an introduction to the software. It is intended to help you establish a good basis for exploring and growing in the exciting field of Computer Aided Engineering.
Download or read book Parametric Modeling with Siemens NX Spring 2019 Edition written by Randy Shih and published by SDC Publications. This book was released on 2019-05 with total page 512 pages. Available in PDF, EPUB and Kindle. Book excerpt: The primary goal of Parametric Modeling with Siemens NX is to introduce the aspects of designing with Solid Modeling and Parametric Modeling. This text is intended to be used as a practical training guide for students and professionals. This text uses Siemens NX as the modeling tool, and the chapters proceed in a pedagogical fashion to guide you from constructing basic solid models to building intelligent mechanical designs, creating multi-view drawings and assembly models. This text takes a hands-on, exercise-intensive approach to all the important Parametric Modeling techniques and concepts. This textbook contains a series of fifteen tutorial style lessons designed to introduce beginning CAD users to NX. This text is also helpful to NX users upgrading from a previous release of the software. The solid modeling techniques and concepts discussed in this text are also applicable to other parametric feature-based CAD packages. The basic premise of this book is that the more designs you create using NX, the better you learn the software. With this in mind, each lesson introduces a new set of commands and concepts, building on previous lessons. This book does not attempt to cover all of NX’s features, only to provide an introduction to the software. It is intended to help you establish a good basis for exploring and growing in the exciting field of Computer Aided Engineering. This book also introduces you to the general principles of 3D printing including a brief history of 3D printing, the types of 3D printing technologies, commonly used filaments, and the basic procedure for printing a 3D model. 3D printing makes it easier than ever for anyone to start turning their designs into physical objects, and by the end of this book you will be ready to start printing out your own designs.
Download or read book Parametric Modeling with Siemens NX Spring 2022 Edition written by Randy Shih and published by SDC Publications. This book was released on with total page 506 pages. Available in PDF, EPUB and Kindle. Book excerpt: The primary goal of Parametric Modeling with Siemens NX is to introduce the aspects of designing with Solid Modeling and Parametric Modeling. This text is intended to be used as a practical training guide for students and professionals. This text uses Siemens NX as the modeling tool, and the chapters proceed in a pedagogical fashion to guide you from constructing basic solid models to building intelligent mechanical designs, creating multi-view drawings and assembly models. This text takes a hands-on, exercise-intensive approach to all the important Parametric Modeling techniques and concepts. This textbook contains a series of fifteen tutorial style lessons designed to introduce beginning CAD users to NX. This text is also helpful to NX users upgrading from a previous release of the software. The solid modeling techniques and concepts discussed in this text are also applicable to other parametric feature-based CAD packages. The basic premise of this book is that the more designs you create using NX, the better you learn the software. With this in mind, each lesson introduces a new set of commands and concepts, building on previous lessons. This book does not attempt to cover all of NX’s features, only to provide an introduction to the software. It is intended to help you establish a good basis for exploring and growing in the exciting field of Computer Aided Engineering. This book also introduces you to the general principles of 3D printing including a brief history of 3D printing, the types of 3D printing technologies, commonly used filaments, and the basic procedure for printing a 3D model. 3D printing makes it easier than ever for anyone to start turning their designs into physical objects, and by the end of this book you will be ready to start printing out your own designs.
Download or read book Parametric Modeling with Mechanical Desktop Version 6 Multimedia Tutorial written by Jack Zecher and published by . This book was released on 2001 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Parametric Modeling with Mechanical Desktop 6 written by Randy Shih and published by . This book was released on 2001 with total page 326 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Parametric Modelling With Think Design 6 written by Randy Shih and published by . This book was released on 2001-05-01 with total page 290 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book SIEMENS NX 12 Design Fundamentals written by Jaecheol Koh and published by onsia. This book was released on 2018-07-08 with total page 658 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook explains how to create solid models, assemblies and drawings using Sie- mens NX 12. NX is a three dimensional CAD/CAM/CAE software developed by Siemens PLM Software Inc., Germany. This textbook is based on NX 12. Users of earlier releases can use this book with minor modifications. We provide files for exercises via our web- site. Almost all files are in NX 6.0 so readers can open the files using NX 6.0 and later releases. It is assumed that readers of this textbook have no prior experience in using Siemens NX for modeling 3D parts. This textbook is suitable for anyone interested in learning 3D modeling using Siemens NX. Each chapter deals with the major functions of creating 3D features using simple exam- ples and step by step, self-paced exercises. Additional drawings of 3D parts are provided at the end of each chapter for further self exercises. The final exercises are expected to be completed by readers who have fully understood the content and completed the exercises in each chapter. Topics covered in this textbook - Chapter 1: Basic components of Siemens NX 12, options and mouse operations. - Chapter 2: Basic step by step modeling process of NX 12. - Chapter 3 and 4: Creating sketches and sketch based features. - Chapter 5: Usage of datums to create complex 3D geometry. - Chapter 6: Additional modeling commands such as fillet, chamfer, draft and shell. - Chapter 7: Modification of 3D parts to take advantage of parametric modeling concepts. - Chapter 8: Copying features, modeling objects and bodies. - Chapter 9: Additional modeling commands such as trim body, tube, sweep along guide, emboss and various commands in synchronous modeling. - Chapter 10: Advanced sketch commands. - Chapter 11: Measuring and verifying 3D geometries. - Chapter 12 and 13: Constructing assembly structures and creating or modifying 3D parts in the context of assembly. - Chapter 14 and 15: Creating drawings for parts or assemblies. - Appendix A: Selecting Objects
Download or read book Siemens Nx 8 5 Design Fundamentals written by Jaecheol Koh and published by Createspace Independent Publishing Platform. This book was released on 2014-05-13 with total page 652 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook explains how to create solid models, assemblies and drawings using Siemens NX 8.5. NX is a three dimensional CAD/CAM/CAE software developed by Siemens PLM Software Inc., Germany. This textbook is based on NX 8.5. Users of earlier releases can use this book with minor modifications. We provide files for exercises via our website. All files are in NX 6.0 so readers can open the files using NX 6.0 and later releases.It is assumed that readers of this textbook have no prior experience in using Siemens NX for modeling 3D parts. This textbook is suitable for anyone interested in learning 3D modeling using Siemens NX. Each chapter deals with the major functions of creating 3D features using simple examples and step by step, self-paced exercises. Additional drawings of 3D parts are provided at the end of each chapter for further self exercises. The final exercises are expected to be completed by readers who have fully understood the content and completed the exercises in each chapter. Topics covered in this textbook - Chapter 1: Basic components of Siemens NX 8.5, options and mouse operations. - Chapter 2: Basic step by step modeling process of NX 8.5. - Chapter 3 and 4: Creating sketches and sketch based features. - Chapter 5: Usage of datums to create complex 3D geometry. - Chapter 6: Additional modeling commands such as fillet, chamfer, draft and shell. - Chapter 7: Modification of 3D parts to take advantage of parametric modeling concepts. - Chapter 8: Copying features, modeling objects and bodies. - Chapter 9: Additional modeling commands such as trim body, tube, sweep along guide, emboss and various commands in synchronous modeling. - Chapter 10: Advanced sketch commands. - Chapter 11: Measuring and verifying 3D geometries. - Chapter 12 and 13: Constructing assembly structures and creating or modifying 3D parts in the context of assembly. - Chapter 14 and 15: Creating drawings for parts or assemblies.
Download or read book Managing IT in Construction Managing Construction for Tomorrow written by Attila Dikbas and published by CRC Press. This book was released on 2009-09-15 with total page 886 pages. Available in PDF, EPUB and Kindle. Book excerpt: Managing IT in Construction/Managing Construction for Tomorrow presents new developments in:- Managing IT strategies - Model based management tools including building information modeling- Information and knowledge management- Communication and collaboration - Data acquisition and storage- Visualization and simulation- Architectural design and
Download or read book Green Power Materials and Manufacturing Technology and Applications written by Ai Min Yang and published by Trans Tech Publications Ltd. This book was released on 2011-08-08 with total page 820 pages. Available in PDF, EPUB and Kindle. Book excerpt: Volume is indexed by Thomson Reuters CPCI-S (WoS). The aim of this special volume was to facilitate the exchange of information on the best practices for Sustainable Power, Sustainable Materials, Green Manufacturing Technology and Applications, etc. It provides an opportunity for engineers and scientists, in academia, industry and government, to address the most innovative research and development ideas, including technical challenges, social and economic issues, and to discuss ideas, results, work-in-progress and experience concerning all aspects of Green Power, Materials and Manufacturing Technology and Applications. The work offers the reader a wealth of ideas.
Download or read book Parametric Modeling with NX 12 written by Randy Shih and published by SDC Publications. This book was released on with total page 480 pages. Available in PDF, EPUB and Kindle. Book excerpt: The primary goal of Parametric Modeling with NX 12 is to introduce the aspects of designing with Solid Modeling and Parametric Modeling. This text is intended to be used as a practical training guide for students and professionals. This text uses NX 12 as the modeling tool, and the chapters proceed in a pedagogical fashion to guide you from constructing basic solid models to building intelligent mechanical designs, creating multi-view drawings and assembly models. This text takes a hands-on, exercise-intensive approach to all the important Parametric Modeling techniques and concepts. This textbook contains a series of fourteen tutorial style lessons designed to introduce beginning CAD users to NX. This text is also helpful to NX users upgrading from a previous release of the software. The solid modeling techniques and concepts discussed in this text are also applicable to other parametric feature-based CAD packages. The basic premise of this book is that the more designs you create using NX, the better you learn the software. With this in mind, each lesson introduces a new set of commands and concepts, building on previous lessons. This book does not attempt to cover all of NX’s features, only to provide an introduction to the software. It is intended to help you establish a good basis for exploring and growing in the exciting field of Computer Aided Engineering. This book also introduces you to the general principles of 3D printing including a brief history of 3D printing, the types of 3D printing technologies, commonly used filaments, and the basic procedure for printing a 3D model. 3D printing makes it easier than ever for anyone to start turning their designs into physical objects, and by the end of this book you will be ready to start printing out your own designs.
Download or read book Advanced Technology in Teaching Proceedings of the 2009 3rd International Conference on Teaching and Computational Science WTCS 2009 written by Yanwen Wu and published by Springer Science & Business Media. This book was released on 2012-03-13 with total page 925 pages. Available in PDF, EPUB and Kindle. Book excerpt: The volume includes a set of selected papers extended and revised from the International Conference on Teaching and Computational Science (WTCS 2009) held on December 19- 20, 2009, Shenzhen, China. WTCS 2009 best papers Volume 2 is to provide a forum for researchers, educators, engineers, and government officials involved in the general areas of Education, Psychology and Computer Science to disseminate their latest research results and exchange views on the future research directions of these fields. 128 high-quality papers are included in the volume. Each paper has been peer-reviewed by at least 2 program committee members and selected by the volume editor Prof. Wu. On behalf of the WTCS 2009, we would like to express our sincere appreciation to all of authors and referees for their efforts reviewing the papers. Hoping you can find lots of profound research ideas and results on the related fields of Education, Psychology and Computer Science.
