Download or read book Parametric Modeling with I DEAS 9 written by Randy H. Shih and published by . This book was released on 2002-05 with total page 372 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Parametric Modeling with I DEAS 12 written by Randy Shih and published by SDC Publications. This book was released on 2006-06 with total page 366 pages. Available in PDF, EPUB and Kindle. Book excerpt: Parametric Modeling with I-DEAS 12 is written as a training guide for students. The text covers I-DEAS 12 and is a hands-on, exercise-intensive look at all the important concepts needed to do feature-based parametric solid modeling. The basic premise of this book is that the more models you create using I-DEAS, the better you learn the software.
Download or read book Parametric Modeling with I DEAS 11 written by Randy H. Shih and published by SDC Publications. This book was released on 2004-08-01 with total page 359 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Parametric Modeling with NX 9 written by Randy Shih and published by SDC Publications. This book was released on 2014 with total page 437 pages. Available in PDF, EPUB and Kindle. Book excerpt: The primary goal of Parametric Modeling with NX 9 is to introduce the aspects of designing with Solid Modeling and Parametric Modeling. This text is intended to be used as a practical training guide for students and professionals. This text uses NX 9 as the modeling tool, and the chapters proceed in a pedagogical fashion to guide you from constructing basic solid models to building intelligent mechanical designs, creating multi-view drawings and assembly models. This text takes a hands-on, exercise-intensive approach to all the important Parametric Modeling techniques and concepts. This textbook contains a series of thirteen tutorial style lessons designed to introduce beginning CAD users to NX. This text is also helpful to NX users upgrading from a previous release of the software. The solid modeling techniques and concepts discussed in this text are also applicable to other parametric feature-based CAD packages. The basic premise of this book is that the more designs you create using NX, the better you learn the software. With this in mind, each lesson introduces a new set of commands and concepts, building on previous lessons. This book does not attempt to cover all of the NX’s features, only to provide an introduction to the software. It is intended to help you establish a good basis for exploring and growing in the exciting field of Computer Aided Engineering.
Download or read book Parametric Modeling With I Deas written by Randy H. Shih and published by . This book was released on 1998-11-01 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Parametric Modeling with I DEAS 8 written by Randy H. Shih and published by . This book was released on 2000 with total page 348 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Parametric Modeling with Siemens NX Spring 2020 Edition written by Randy Shih and published by SDC Publications. This book was released on 2020-06-08 with total page 506 pages. Available in PDF, EPUB and Kindle. Book excerpt: The primary goal of Parametric Modeling with Siemens NX is to introduce the aspects of designing with Solid Modeling and Parametric Modeling. This text is intended to be used as a practical training guide for students and professionals. This text uses Siemens NX as the modeling tool, and the chapters proceed in a pedagogical fashion to guide you from constructing basic solid models to building intelligent mechanical designs, creating multi-view drawings and assembly models. This text takes a hands-on, exercise-intensive approach to all the important Parametric Modeling techniques and concepts. This textbook contains a series of fifteen tutorial style lessons designed to introduce beginning CAD users to NX. This text is also helpful to NX users upgrading from a previous release of the software. The solid modeling techniques and concepts discussed in this text are also applicable to other parametric feature-based CAD packages. The basic premise of this book is that the more designs you create using NX, the better you learn the software. With this in mind, each lesson introduces a new set of commands and concepts, building on previous lessons. This book does not attempt to cover all of NX’s features, only to provide an introduction to the software. It is intended to help you establish a good basis for exploring and growing in the exciting field of Computer Aided Engineering. This book also introduces you to the general principles of 3D printing including a brief history of 3D printing, the types of 3D printing technologies, commonly used filaments, and the basic procedure for printing a 3D model. 3D printing makes it easier than ever for anyone to start turning their designs into physical objects, and by the end of this book you will be ready to start printing out your own designs.
Download or read book Enabling Manufacturing Competitiveness and Economic Sustainability written by Hoda A. ElMaraghy and published by Springer Science & Business Media. This book was released on 2011-09-29 with total page 674 pages. Available in PDF, EPUB and Kindle. Book excerpt: The changing manufacturing environment requires more responsive and adaptable manufacturing systems. The theme of the 4th International Conference on Changeable, Agile, Reconfigurable and Virtual production (CARV2011) is “Enabling Manufacturing Competitiveness and Economic Sustainability”. Leading edge research and best implementation practices and experiences, which address these important issues and challenges, are presented. The proceedings include advances in manufacturing systems design, planning, evaluation, control and evolving paradigms such as mass customization, personalization, changeability, re-configurability and flexibility. New and important concepts such as the dynamic product families and platforms, co-evolution of products and systems, and methods for enhancing manufacturing systems’ economic sustainability and prolonging their life to produce more than one product generation are treated. Enablers of change in manufacturing systems, production volume and capability scalability and managing the volatility of markets, competition among global enterprises and the increasing complexity of products, manufacturing systems and management strategies are discussed. Industry challenges and future directions for research and development needed to help both practitioners and academicians are presented.
Download or read book CAD Data Transfer for Solid Models written by E.G. Schlechtendahl and published by Springer Science & Business Media. This book was released on 2013-11-11 with total page 340 pages. Available in PDF, EPUB and Kindle. Book excerpt: Principal authors: U. Kroszynski, B. Palstr9Sm 1.1 The evolution of concepts and specifications for CAD data exchange The CAD/CAM community has witnessed, during the last decade, the appearance of several specifications as well as proposals for standards which either attempt to cover wider areas or to be more reliable and stable than the others. With the rapid evolution of both hardware and software, the capabilities offered by CAD systems and CAD based application systems are far more advanced than they were only ten years ago, even when they are now based on micro-computers or personal comput ers. The situation with standards, however, is not and cannot be so. In order to be reliable and accepted by a wide community of both vendors and users, a standard has to be sta ble. This implies a life span of at least a decade. This also implies that the standard has to be general and flexible enough to accommodate present as well as expected future developments. 1.1.1 IGES The initial development of concepts for CAD data exchange is strongly influenced by the US Integrated Computer Aided Manufacturing (ICAM) programme, that dealt with the development of methods for data exchange. In September 1979, a subgroup was estab lished with participation of the National Bureau of Standards, the General Electric Com pany, and the Boeing Company. The result of this effort was the Initial Graphics Exchange Specification (IGES) that was published as a NBS report [61] in 1980.
Download or read book Advances in Concurrent Engineering written by Biren Prasad and published by CRC Press. This book was released on 1996-08-22 with total page 484 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Parametric Modeling with NX 12 written by Randy Shih and published by SDC Publications. This book was released on with total page 480 pages. Available in PDF, EPUB and Kindle. Book excerpt: The primary goal of Parametric Modeling with NX 12 is to introduce the aspects of designing with Solid Modeling and Parametric Modeling. This text is intended to be used as a practical training guide for students and professionals. This text uses NX 12 as the modeling tool, and the chapters proceed in a pedagogical fashion to guide you from constructing basic solid models to building intelligent mechanical designs, creating multi-view drawings and assembly models. This text takes a hands-on, exercise-intensive approach to all the important Parametric Modeling techniques and concepts. This textbook contains a series of fourteen tutorial style lessons designed to introduce beginning CAD users to NX. This text is also helpful to NX users upgrading from a previous release of the software. The solid modeling techniques and concepts discussed in this text are also applicable to other parametric feature-based CAD packages. The basic premise of this book is that the more designs you create using NX, the better you learn the software. With this in mind, each lesson introduces a new set of commands and concepts, building on previous lessons. This book does not attempt to cover all of NX’s features, only to provide an introduction to the software. It is intended to help you establish a good basis for exploring and growing in the exciting field of Computer Aided Engineering. This book also introduces you to the general principles of 3D printing including a brief history of 3D printing, the types of 3D printing technologies, commonly used filaments, and the basic procedure for printing a 3D model. 3D printing makes it easier than ever for anyone to start turning their designs into physical objects, and by the end of this book you will be ready to start printing out your own designs.
Download or read book e Design written by Kuang-Hua Chang and published by Academic Press. This book was released on 2016-02-23 with total page 1228 pages. Available in PDF, EPUB and Kindle. Book excerpt: e-Design: Computer-Aided Engineering Design, Revised First Edition is the first book to integrate a discussion of computer design tools throughout the design process. Through the use of this book, the reader will understand basic design principles and all-digital design paradigms, the CAD/CAE/CAM tools available for various design related tasks, how to put an integrated system together to conduct All-Digital Design (ADD), industrial practices in employing ADD, and tools for product development. Comprehensive coverage of essential elements for understanding and practicing the e-Design paradigm in support of product design, including design method and process, and computer based tools and technology Part I: Product Design Modeling discusses virtual mockup of the product created in the CAD environment, including not only solid modeling and assembly theories, but also the critical design parameterization that converts the product solid model into parametric representation, enabling the search for better design alternatives Part II: Product Performance Evaluation focuses on applying CAE technologies and software tools to support evaluation of product performance, including structural analysis, fatigue and fracture, rigid body kinematics and dynamics, and failure probability prediction and reliability analysis Part III: Product Manufacturing and Cost Estimating introduces CAM technology to support manufacturing simulations and process planning, sheet forming simulation, RP technology and computer numerical control (CNC) machining for fast product prototyping, as well as manufacturing cost estimate that can be incorporated into product cost calculations Part IV: Design Theory and Methods discusses modern decision-making theory and the application of the theory to engineering design, introduces the mainstream design optimization methods for both single and multi-objectives problems through both batch and interactive design modes, and provides a brief discussion on sensitivity analysis, which is essential for designs using gradient-based approaches Tutorial lessons and case studies are offered for readers to gain hands-on experiences in practicing e-Design paradigm using two suites of engineering software: Pro/ENGINEER-based, including Pro/MECHANICA Structure, Pro/ENGINEER Mechanism Design, and Pro/MFG; and SolidWorks-based, including SolidWorks Simulation, SolidWorks Motion, and CAMWorks. Available on the companion website http://booksite.elsevier.com/9780123820389
Download or read book Product Design Modeling using CAD CAE written by Kuang-Hua Chang and published by Academic Press. This book was released on 2014-01-20 with total page 439 pages. Available in PDF, EPUB and Kindle. Book excerpt: Product Design Modeling using CAD/CAE is the third part of a four-part series. It is the first book to integrate discussion of computer design tools throughout the design process. Through this book, you will: Understand basic design principles and all digital design paradigms Understand computer-aided design, engineering, and manufacturing (CAD/CAE/CAM) tools available for various design-related tasks Understand how to put an integrated system together to conduct all-digital design (ADD) Provides a comprehensive and thorough coverage of essential elements for product modeling using the virtual engineering paradigm Covers CAD/CAE in product design, including solid modeling, mechanical assembly, parameterization, product data management, and data exchange in CAD Case studies and tutorial examples at the end of each chapter provide hands-on practice in implementing off-the-shelf computer design tools Provides two projects showing the use of Pro/ENGINEER and SolidWorks to implement concepts discussed in the book
Download or read book Perspectives from Europe and Asia on Engineering Design and Manufacture written by Xiu-Tian Yan and published by Springer Science & Business Media. This book was released on 2004-04-30 with total page 744 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book will be the first proceedings of a series of symposia on the exchange of best practices and research in engineering design and manufacture organized focusing on Europe and Asia by a group of researchers from European and Asian Universities working on several EU funded projects. This very first book will explore the difference and communalities of European and Asian research and practice in this very important field. With the rapid economic expansion of Asia and the gradual shift of manufacturing from Europe and the USA to Asia, this Symposium will provide a timely forum for leading researchers in the field to exchange their research findings and experience. The book covers this first symposium, and aims to give insights to these on-going changes, shows their implications from design and manufacture perspective for both Europe and Asia and identifies new research topics to improve industrial practice. The primary audience of this book are researchers in the field of engineering design and manufacture, industrialists and business persons who are interested in finding out the state of design and manufacture in Asia and Europe.
Download or read book Proceedings of the ASME Design Engineering Technical Conferences written by and published by . This book was released on 2005 with total page 614 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Global Design to Gain a Competitive Edge written by Xiu-Tian Yan and published by Springer Science & Business Media. This book was released on 2008-07-30 with total page 870 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recent rapid globalisation of manufacturing industries leads to a drive and thirst for rapid advancements in technological development and expertise in the fields of advanced design and manufacturing, especially at their interfaces. This development results in many economical benefits to and improvement of quality of life for many people all over the world. Technically speaking, this rapid development also create many opportunities and challenges for both industrialists and academics, as the design requirements and constraints have completely changed in this global design and manufacture environment. Consequently the way to design, manufacture and realise products have changed as well. The days of designing for a local market and using local suppliers in manufacturing have gone, if enterprises aim to maintain their competitiveness and global expansion leading to further success. In this global context and scenario, both industry and the academia have an urgent need to equip themselves with the latest knowledge, technology and methods developed for engineering design and manufacture. To address this shift in engineering design and manufacture, supported by the European Commission under the Asia Link Programme with a project title FASTAHEAD (A Framework Approach to Strengthening Asian Higher Education in Advanced Design and Manufacture), three key project partners, namely the University of Strathclyde of the United Kingdom, Northwestern Polytechncial University of China, and the Troyes University of Technology of France organised a third international conference.
Download or read book Biologically Responsive Biomaterials for Tissue Engineering written by Iulian Vasile Antoniac and published by Springer Science & Business Media. This book was released on 2012-09-07 with total page 261 pages. Available in PDF, EPUB and Kindle. Book excerpt: Developments in the area of biomaterials, bionanotechnology, tissue engineering, and medical devices are becoming the core of health care. Almost all medical specialties involve the use of biomaterials, and research plays a key role in the development of new and improved treatment modalities. This volume focuses on several current trends in tissue engineering, remodelling and regeneration. Leading researchers describe the use of nanomaterials to create new functionalities when interfaced with biological molecules or structures. In addition to coverage of basic science and engineering aspects, a range of applications in bionanotechnology are presented, including diagnostic devices, contrast agents, analytical tools, physical therapy applications, and vehicles for targeted drug delivery. The use of polymers, alloys, and composites, or a combination of these, for biomaterials applications in orthopaedics is also explored. These contributions represent essential reading for the biomaterials and biomedical engineering communities, and can serve as instructional course lectures targeted at graduate and post-graduate students.
