Download or read book Parametric and Feature Based CAD CAM written by Jami J. Shah and published by John Wiley & Sons. This book was released on 1995-11-03 with total page 646 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book is the complete introduction and applications guide to this new technology. This book introduces the reader to features and gives an overview of geometric modeling techniques, discusses the conceptual development of features as modeling entities, illustrates the use of features for a variety of engineering design applications, and develops a set of broad functional requirements and addresses high level design issues.
Download or read book Computer Aided Injection Mold Design and Manufacture written by J.Y.H. Fuh and published by CRC Press. This book was released on 2004-08-02 with total page 396 pages. Available in PDF, EPUB and Kindle. Book excerpt: Examining processes that affect more than 70 percent of consumer products ranging from computers to medical devices and automobiles, this reference presents the latest research in automated plastic injection and die casting mold design and manufacture. It analyzes many industrial examples and methodologies while focusing on the algorithms, implementation procedures, and system architectures that will lead to a fully automated or semi-automated computer-aided injection mold design system (CADIMDS). This invaluable guide in this challenging area of precision engineering summarizes key findings and innovations from the authors' many years of research on intelligent mold design technologies.
Download or read book Cad cam With Creo Parametric Step by step Tutorial For Versions 4 0 5 0 And 6 0 written by Krassimir Dotchev and published by World Scientific. This book was released on 2021-02-08 with total page 340 pages. Available in PDF, EPUB and Kindle. Book excerpt: The purpose of this book is to introduce the reader to 3D CAD/CAM modelling using Creo™ Parametric (Creo) software. This concise textbook consists of ten lessons covering the basics in Part and Assembly Modelling, Mould Design, NC Simulation, and Engineering Drawings. Each lesson provides essential knowledge and guides the user through the process of performing a practical exercise or task. The modelling philosophy, implementation of corresponding features, and commands behind each exercise are explained and presented in a step-by-step manner. The material is richly illustrated with screenshots and icons from the software interface to facilitate the learning process.Suitable for beginners and intermediate users, CAD/CAM with Creo Parametric enables the reader to make a quick start in learning how to use complex 3D CAD/CAM software such as Creo in engineering design and manufacturing. The aim is to develop an understanding of the main modelling principles and software tools as a basis for independent learning and solving more complex engineering problems.
Download or read book Computer Aided Inspection Planning written by Abdulrahman Al-Ahmari and published by CRC Press. This book was released on 2016-12-19 with total page 292 pages. Available in PDF, EPUB and Kindle. Book excerpt: The inspection process is one of the most important steps in manufacturing industries because it safeguards high quality products and customer satisfaction. Manual inspection may not provide the desired accuracy. This book introduces and implements a new methodology and develops the supporting technologies for automated inspection planning based on Computer Aided Design (CAD) models. It also provides and implements an efficient link for automated operation based on Coordinate Measuring Machine (CMM). The link’s output is a DMIS code programming file based on the inspection planning table that is executed on CMM.
Download or read book Feature Based Product Life Cycle Modelling written by René Soenen and published by Springer. This book was released on 2013-04-17 with total page 192 pages. Available in PDF, EPUB and Kindle. Book excerpt: Feature-based technology is the key factor towards meeting the increasingly high demands of improving and speeding up the product development process from concept to customer feedback, and is therefore expected to be able to provide for a better approach to integrate the complete product design process chain. Feature Based Product Life-Cycle Modelling is dedicated to exploring the progress towards an integrated solution for the product creation process based on feature technology. Hence, it encompasses significant phases of the product creation process, from conceptual design to recycling, including the following topics: *Life-phases modelling; *Knowledge based engineering; *Multiple-view geometric modelling; *Technological links among assemblies; *Manufacturing process cost estimation; *Manufacturing modelling; *Machining preparation; *Product deterioration prediction; *Product recovery estimation. For each topic, a state of the art, theoretic bases, tentative solutions and illustrative examples are detailed, demonstrating the successful application of feature technology to the modelling of innovative products and the efficient control of their design. The book is a selection of proceedings from the International Conference on Feature Modelling in Advanced Design-for-the-Life-Cycle Systems (FEATS 2001), which was sponsored by the International Federation for Information Processing (IFIP) and held in Valenciennes, France in June 2001.
Download or read book Advanced CAD CAM Systems written by René Soenen and published by Springer. This book was released on 2016-01-09 with total page 273 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides up-to-date information about the promising use of feature technology for integrating computer-aided-design with subsequent applications. The book consists of 20 articles based upon the international IFIP conference on this topic held in Valenciennes, France in May 1994.
Download or read book Leading the Web in Concurrent Engineering written by Parisa Ghodous and published by IOS Press. This book was released on 2006 with total page 916 pages. Available in PDF, EPUB and Kindle. Book excerpt: Contains papers on the advances in Concurrent Engineering research and applications. This book focuses on developing methodologies, techniques and tools based on Web technologies required to support the key objectives of Concurrent Engineering.
Download or read book Parametric Modeling with NX 9 written by Randy Shih and published by SDC Publications. This book was released on 2014 with total page 437 pages. Available in PDF, EPUB and Kindle. Book excerpt: The primary goal of Parametric Modeling with NX 9 is to introduce the aspects of designing with Solid Modeling and Parametric Modeling. This text is intended to be used as a practical training guide for students and professionals. This text uses NX 9 as the modeling tool, and the chapters proceed in a pedagogical fashion to guide you from constructing basic solid models to building intelligent mechanical designs, creating multi-view drawings and assembly models. This text takes a hands-on, exercise-intensive approach to all the important Parametric Modeling techniques and concepts. This textbook contains a series of thirteen tutorial style lessons designed to introduce beginning CAD users to NX. This text is also helpful to NX users upgrading from a previous release of the software. The solid modeling techniques and concepts discussed in this text are also applicable to other parametric feature-based CAD packages. The basic premise of this book is that the more designs you create using NX, the better you learn the software. With this in mind, each lesson introduces a new set of commands and concepts, building on previous lessons. This book does not attempt to cover all of the NX’s features, only to provide an introduction to the software. It is intended to help you establish a good basis for exploring and growing in the exciting field of Computer Aided Engineering.
Download or read book Methods in Product Design written by Ali K. Kamrani and published by CRC Press. This book was released on 2016-04-19 with total page 334 pages. Available in PDF, EPUB and Kindle. Book excerpt: As industries adopt consumer-focused product development strategies, they should offer broader product ranges in shorter design times and the processes that can manufacture in arbitrary lot sizes. In addition, they would need to apply state-of-the-art methods and tools to easily conduct early product design and development trade-off analysis among competing objectives. Methods in Product Design: New Strategies in Reengineering supplies insights into the methods and techniques that enable implementing a consumer-focused product design philosophy by integrating design and development capabilities with intelligent computer-based systems. The book defines customer focused design and discusses ways to assess changing demands and sources, and delves into what is needed to successfully manufacture goods in a demanding market. It reviews proven methods for assessing customer need. Then, after showing how changing needs impact the reengineering of products, it explains how change can be efficiently achieved. It details how IT advances and technology support customer-focused product development, discusses cutting-edge mass customization principles that maximize cost-effective production, and illustrates how to implement effective predictive maintenance policies. Methods in Product Design: New Strategies in Reengineering provides methods, state-of-the-art technologies, and new strategies for customer-focused product design and development that allow organizations to quickly respond to the demanding global marketplace.
Download or read book Computer Based Design and Manufacturing written by Emad Abouel Nasr and published by Springer Science & Business Media. This book was released on 2007-01-11 with total page 359 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers insights into the methods and techniques required to implement a consumer-focused product design philosophy. It does this by integrating capabilities for intelligent information support and group decision-making utilizing a common enterprise network model and knowledge interface through shared technologies. It includes discussion of applied methods developed in the field of the product design and gives the latest research results.
Download or read book Parametric and Variational Design written by Josef Hoschek and published by B. G. Teubner Gmbh. This book was released on 1994 with total page 184 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Handbook of Computer Aided Geometric Design written by G. Farin and published by Elsevier. This book was released on 2002-08-13 with total page 849 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a comprehensive coverage of the fields Geometric Modeling, Computer-Aided Design, and Scientific Visualization, or Computer-Aided Geometric Design. Leading international experts have contributed, thus creating a one-of-a-kind collection of authoritative articles. There are chapters outlining basic theory in tutorial style, as well as application-oriented articles. Aspects which are covered include: Historical outline Curve and surface methods Scientific Visualization Implicit methods Reverse engineering. This book is meant to be a reference text for researchers in the field as well as an introduction to graduate students wishing to get some exposure to this subject.
Download or read book Geometric Modelling written by Fumihiko Kimura and published by Springer. This book was released on 2013-06-29 with total page 374 pages. Available in PDF, EPUB and Kindle. Book excerpt: Geometric modelling has been an important and interesting subject for many years from the purely mathematical and computer science viewpoint, and also from the standpoint of engineering and various other applications, such as CAD/CAM, entertainment, animation, and multimedia. This book focuses on the interaction between the theoretical foundation of geometric modelling and practical applications in CAD and related areas. Geometric Modelling: Theoretical and Computational Basis towards Advanced CAD Applications starts with two position papers, discussing basic computational theory and practical system solutions. The well-organized seven review papers give a systematic overview of the current situation and deep insight for future research and development directions towards the reality of shape representation and processing. They discuss various aspects of important issues, such as geometric computation for space search and shape generation, parametric modelling, feature modelling, user interface for geometric modelling, geometric modelling for the Next Generation CAD, and geometric/shape standard. Other papers discuss features and new research directions in geometric modelling, solid modeling, free-form surface modeling, intersection calculation, mesh modeling and reverse engineering. They cover a wide range of geometric modelling issues to show the problem scope and the technological importance. Researchers interested in the current status of geometric modelling research and developments will find this volume to be an essential reference.
Download or read book Integrated Process and Fixture Planning written by Awais Ahmad Khan and published by CRC Press. This book was released on 2018-05-20 with total page 192 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fixtures are used in manufacturing to secure working devices. They help insure conformity, accuracy, efficiency, and interchangeability; their reliability is crucial. This book introduces and implements a new methodology for more flexible fixture design and manufacturing processes, and develops the supporting technologies for automation and fixture planning using object oriented platforms. It also presents an integrated solution with Computer Aided Design (CAD) applications.
Download or read book Modeling and Problem Solving Techniques for Engineers written by Laszlo Horvath and published by Elsevier. This book was released on 2004-07-23 with total page 350 pages. Available in PDF, EPUB and Kindle. Book excerpt: Summary: "Today, the majority of engineers in many varied fields must utilize CAD/CAM systems in their work, but due to the increasing number and sophistication of programs and methods available, no one engineer can possibly be an expert in all of them. This book will help, by offering a detailed and comprehensive survey of all the leading computer-aided engineering methods, effectively providing a map to this sometimes confusing world. It is especially written for design and production engineers practicing in the modern industrial environment, where design, analysis, manufacturing planning, production planning and computer controlled equipment programming are all governed by CAD/CAM systems. The authors, who are engineering professors as well as IT professionals, clearly explain concepts, approaches, principles, and practical methods in purposefully IT-jargon free language, so that engineers will not get lost in a tangle of acronyms. It profides basic theoretical background and examines the relative value of various competitive computer-aided engineering methods, so that engineers will feel confident in making design tool choices, without having to become specialists in the development issues surrounding each system"--Back cover.
Download or read book Intelligent Information Technologies Concepts Methodologies Tools and Applications written by Sugumaran, Vijayan and published by IGI Global. This book was released on 2007-11-30 with total page 2614 pages. Available in PDF, EPUB and Kindle. Book excerpt: This set compiles more than 240 chapters from the world's leading experts to provide a foundational body of research to drive further evolution and innovation of these next-generation technologies and their applications, of which scientific, technological, and commercial communities have only begun to scratch the surface.
