Download or read book Parameter Identification and Model Based Control of Direct Drive Robots written by and published by . This book was released on 1991 with total page 398 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Model Based Control of a Robot Manipulator written by Chae H. An and published by MIT Press (MA). This book was released on 1988-03-01 with total page 233 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first integrated treatment of many of the most important recent developments in using detailed dynamic models of robots to improve their control.
Download or read book Model based Control of a Robot Manipulator written by Chae H. An and published by MIT Press (MA). This book was released on 1988-01 with total page 233 pages. Available in PDF, EPUB and Kindle. Book excerpt: Model-Based Control of a Robot Manipulator presents the first integrated treatment of many of the most important recent developments in using detailed dynamic models of robots to improve their control. The authors' work on automatic identification of kinematic and dynamic parameters, feedforward position control, stability in force control, and trajectory learning has significant implications for improving performance in future robot systems. All of the main ideas discussed in this book have been validated by experiments on a direct-drive robot arm. The book addresses the issues of building accurate robot models and of applying them for high performance control. It first describes how three sets of models - the kinematic model of the links and the inertial models of the links and of rigid-body loads - can be obtained automatically using experimental data. These models are then incorporated into position control, single trajectory learning, and force control. The MIT Serial Link Direct Drive Arm, on which these models were developed and applied to control, is one of the few manipulators currently suitable for testing such concepts. Contents: Introduction. Direct Drive Arms. Kinematic Calibration. Estimation of Load Inertial Parameters. Estimation of Link Inertial Parameters. Feedforward and Computed Torque Control. Model-Based Robot Learning. Dynamic Stability Issues in Force Control. Kinematic Stability Issues in Force Control. Conclusion. Chae An is Research Staff Member, IBM T.J. Watson Research Center, Christopher Atkeson is an Assistant Professor and John Hollerbach is an Associate Professor in the MIT Department of Brain and Cognitive Sciences and the MIT Artificial Intelligence Laboratory. Model-Based Control of a Robot Manipulator is included in the Artificial Intelligence Series edited by Patrick Winston and Michael Brady.
Download or read book Modelling and Identification in Robotics written by Krzysztof R. Kozlowski and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 288 pages. Available in PDF, EPUB and Kindle. Book excerpt: As the use and relevance of robotics for countless scientific purposes grows all the time, research into the many diverse elements of the subject becomes ever more important and in demand. This volume examines in depth the most topical, complex issues of modelling and identification in robotics. The book is divided into three main parts. The !first part is devoted to robot dynamics modelling and identification of robot and load parameters, incorporating friction torques, discussing identification schemes, and presenting simulations and experiment al results of robot and load dynamic parameters identification. A general concept of robot programming language for research and educational purposes is examined and there is a detailed outline of its basic structures along with hardware requirements, which both constitute an open robot controller architecture. Finally a hybrid controller is derived, and several experimental results of this system are outlined. This impressive discussion of the topic covers both the theoretical and practical, illustrated throughout by examples and experimental results, and will be of value to anyone researching or practising within the field of robotics, automation and system i dentification or to control engineers.
Download or read book Modeling Identification and Control of Robots written by W. Khalil and published by Butterworth-Heinemann. This book was released on 2004-07-01 with total page 503 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by two of Europe's leading robotics experts, this book provides the tools for a unified approach to the modelling of robotic manipulators, whatever their mechanical structure. No other publication covers the three fundamental issues of robotics: modelling, identification and control. It covers the development of various mathematical models required for the control and simulation of robots.·World class authority·Unique range of coverage not available in any other book·Provides a complete course on robotic control at an undergraduate and graduate level
Download or read book A Dynamic Parameter Identification Method for Migrating Control Strategies Between Heterogeneous Wheeled Mobile Robots written by Jeffrey W. Laut and published by . This book was released on 2011 with total page 182 pages. Available in PDF, EPUB and Kindle. Book excerpt: Abstract: Recent works on the control of wheeled mobile robots have shifted from the use of the kinematic model to the use of the dynamic model. Since theoretical results typically treat the inputs to the dynamic model as torques, few experimental results have been provided, as torque is typically not the input to most commercially available robots. Few papers have implemented controllers based on the dynamic model, and those that have did not address the issue of identifying the parameters of the dynamic model. This work focuses on a method for identifying the parameters of the dynamic model of a wheeled mobile robot. The method is shown to be both effective and easy to implement, and requires no prior knowledge of what the parameters may be. Experimental results on two mobile robots of different scale demonstrate its effectiveness. The estimates of the parameters created by the proposed method are then used in an adaptive controller to verify their accuracy. For future work, this method should be completed autonomously in a two-part manner, onboard the mobile robot. First, the robot should perform the method proposed here to generate an initial parameter estimate, and then use adaptive control to update the estimates.
Download or read book Adaptive Control of Mechanical Manipulators written by John J. Craig and published by Addison Wesley Publishing Company. This book was released on 1988 with total page 152 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Parameter Estimation and Adaptive Control for Nonlinear Servo Systems written by Shubo Wang and published by Elsevier. This book was released on 2024-01-16 with total page 304 pages. Available in PDF, EPUB and Kindle. Book excerpt: Parameter Estimation and Adaptive Control for Nonlinear Servo Systems presents the latest advances in observer-based control design, focusing on adaptive control for nonlinear systems such as adaptive neural network control, adaptive parameter estimation, and system identification. This book offers an array of new real-world applications in the field. Written by eminent scientists in the field of control theory, this book covers the latest advances in observer-based control design. It provides fundamentals, algorithms, and it discusses key applications in the fields of power systems, robotics and mechatronics, flight and automotive systems. - Presents a clear and concise introduction to the latest advances in parameter estimation and adaptive control with several concise applications for servo systems - Covers a wide range of applications usually not found in similar books, such as power systems, robotics, mechatronics, aeronautics, and industrial systems - Contains worked examples which make it ideal for advanced courses as well as for researchers starting to work in the field, particularly suitable for engineers wishing to enter the field quickly and efficiently
Download or read book Robot Force Control written by Bruno Siciliano and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 154 pages. Available in PDF, EPUB and Kindle. Book excerpt: One of the fundamental requirements for the success of a robot task is the capability to handle interaction between manipulator and environment. The quantity that describes the state of interaction more effectively is the contact force at the manipulator's end effector. High values of contact force are generally undesirable since they may stress both the manipulator and the manipulated object; hence the need to seek for effective force control strategies. The book provides a theoretical and experimental treatment of robot interaction control. In the framework of model-based operational space control, stiffness control and impedance control are presented as the basic strategies for indirect force control; a key feature is the coverage of six-degree-of-freedom interaction tasks and manipulator kinematic redundancy. Then, direct force control strategies are presented which are obtained from motion control schemes suitably modified by the closure of an outer force regulation feedback loop. Finally, advanced force and position control strategies are presented which include passivity-based, adaptive and output feedback control schemes. Remarkably, all control schemes are experimentally tested on a setup consisting of a seven-joint industrial robot with open control architecture and force/torque sensor. The topic of robot force control is not treated in depth in robotics textbooks, in spite of its crucial importance for practical manipulation tasks. In the few books addressing this topic, the material is often limited to single-degree-of-freedom tasks. On the other hand, several results are available in the robotics literature but no dedicated monograph exists. The book is thus aimed at filling this gap by providing a theoretical and experimental treatment of robot force control.
Download or read book Robot Control 1991 SYROCO 91 written by I. Troch and published by Elsevier. This book was released on 2014-05-23 with total page 583 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains 92 papers on the state-of-the-art in robotics research. In this volume topics on modelling and identification are treated first as they build the basis for practically all control aspects. Then, the most basic control tasks are discussed i.e. problems of inverse kinematics. Groups of papers follow which deal with various advanced control aspects. They range from rather general methods to more specialized topics such as force control and control of hydraulic robots. The problem of path planning is addressed and strategies for robots with one arm, for mobile robots and for multiple arm robots are presented. Also covered are computational improvements and software tools for simulation and control, the integration of sensors and sensor signals in robot control.
Download or read book Current Trends in Nonlinear Systems and Control written by Laura Menini and published by Springer Science & Business Media. This book was released on 2006-09-13 with total page 557 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume is an outgrowth of the workshop "Applications of Advanced Control Theory to Robotics and Automation, "organized in honor of the 70th birthdays of Petar V. Kokotovic and Salvatore (Turi) Nicosia. Both Petar and Turi have carried out distinguished work in the control community and have long been recognized as mentors, as well as experts and pioneers in the field of automatic control, covering many topics in control theory and several different applications. The variety of their research is reflected in this book, which includes contributions ranging from mathematics to laboratory experiments. The scope of the work is very broad, and although each chapter is self-contained, the book has been organized into thematically related chapters, which in some cases, suggest to the reader a convenient reading sequence. The great variety of topics covered and the almost tutorial writing style used by many of the authors will make this book suitable for both experts in the control field and young researchers who seek a more intuitive understanding of these relevant topics in the field.
Download or read book System Identification SYSID 03 written by Paul Van Den Hof and published by Elsevier. This book was released on 2004-06-29 with total page 2080 pages. Available in PDF, EPUB and Kindle. Book excerpt: The scope of the symposium covers all major aspects of system identification, experimental modelling, signal processing and adaptive control, ranging from theoretical, methodological and scientific developments to a large variety of (engineering) application areas. It is the intention of the organizers to promote SYSID 2003 as a meeting place where scientists and engineers from several research communities can meet to discuss issues related to these areas. Relevant topics for the symposium program include: Identification of linear and multivariable systems, identification of nonlinear systems, including neural networks, identification of hybrid and distributed systems, Identification for control, experimental modelling in process control, vibration and modal analysis, model validation, monitoring and fault detection, signal processing and communication, parameter estimation and inverse modelling, statistical analysis and uncertainty bounding, adaptive control and data-based controller tuning, learning, data mining and Bayesian approaches, sequential Monte Carlo methods, including particle filtering, applications in process control systems, motion control systems, robotics, aerospace systems, bioengineering and medical systems, physical measurement systems, automotive systems, econometrics, transportation and communication systems *Provides the latest research on System Identification *Contains contributions written by experts in the field *Part of the IFAC Proceedings Series which provides a comprehensive overview of the major topics in control engineering.
Download or read book Robotics Research written by Cédric Pradalier and published by Springer Science & Business Media. This book was released on 2011-05-02 with total page 752 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume presents a collection of papers presented at the 14th International Symposium of Robotic Research (ISRR). ISRR is the biennial meeting of the International Foundation of Robotic Research (IFRR) and its 14th edition took place in Lucerne, Switzerland, from August 31st to September 3rd, 2009. As for the previous symposia, ISRR 2009 followed up on the successful concept of a mixture of invited contributions and open submissions. Half of the 48 presentations were therefore invited contributions from outstanding researchers selected by the IFRR officers, and half were chosen among the 66 submissions after peer review. This selection process resulted in a truly excellent technical program which, we believe, featured some of the very best of robotic research. Out of the 48 presentations, the 42 papers which were finally submitted for publication are organized in 8 sections that encompass the major research orientations in robotics: Navigation, Control & Planning, Human-Robot Interaction, Manipulation and Humanoids, Learning, Mapping, Multi-Robot Systems, and Micro-Robotics. They represent an excellent snapshot of cutting-edge research in robotics and outline future directions.
Download or read book Kinematic Modeling Identification and Control of Robotic Manipulators written by Henry W. Stone and published by Springer Science & Business Media. This book was released on 1987-09-30 with total page 258 pages. Available in PDF, EPUB and Kindle. Book excerpt: The objective of this dissertation is to advance the state-of-the-art in the kinematic modeling, identification, and control of robotic manipulators with rigid links in an effort to improve robot kinematic performance. The positioning accuracy of commercially-available industrial robotic manipulators depends upon a kinematic model which describes the robot geometry in a parametric form. Manufacturing error in the machining and assembly of manipulators lead to discrepancies between the design parameters and the physical structure. Improving the kinematic perfor mance thus requires the identification of the actual kinematic parameters of each individual robot. The identified kinematic parameters are referred to as the arm signature. Existing robot kinematic models, such as the Denavit-Hartenberg model, are not directly applicable to kinematic parameter identification. In this dissertation we introduce a new kinematic model, called the 5-Model, which is applicable to kinematic parameter identification, and use it as the foundation for our development of a general technique for identifying the kinematic parameters of any robot with rigid links.
Download or read book Introduction to Mobile Robot Control written by Spyros G Tzafestas and published by Elsevier. This book was released on 2013-10-03 with total page 718 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introduction to Mobile Robot Control provides a complete and concise study of modeling, control, and navigation methods for wheeled non-holonomic and omnidirectional mobile robots and manipulators. The book begins with a study of mobile robot drives and corresponding kinematic and dynamic models, and discusses the sensors used in mobile robotics. It then examines a variety of model-based, model-free, and vision-based controllers with unified proof of their stabilization and tracking performance, also addressing the problems of path, motion, and task planning, along with localization and mapping topics. The book provides a host of experimental results, a conceptual overview of systemic and software mobile robot control architectures, and a tour of the use of wheeled mobile robots and manipulators in industry and society. Introduction to Mobile Robot Control is an essential reference, and is also a textbook suitable as a supplement for many university robotics courses. It is accessible to all and can be used as a reference for professionals and researchers in the mobile robotics field. - Clearly and authoritatively presents mobile robot concepts - Richly illustrated throughout with figures and examples - Key concepts demonstrated with a host of experimental and simulation examples - No prior knowledge of the subject is required; each chapter commences with an introduction and background
Download or read book Non Adaptive and Adaptive Control of Manipulation Robots written by M. Vukobratovic and published by Springer Science & Business Media. This book was released on 2013-12-11 with total page 394 pages. Available in PDF, EPUB and Kindle. Book excerpt: The material presented in this monograph is a logical continuation of research results achieved in the control of manipulation robots. This is in a way, a synthesis of many-year research efforts of the associates of Robotics Department, Mihailo Pupin Institute, in the field of dynamic control.of robotic systems. As in Vol. 2 of this Series, all results rely on the mathematical models of dynamics of active spatial mechanisms which offer the possibility for adequate dynamic control of manipula tion robots. Compared with Vol. 2, this monograph has three essential new character istics, and a variety of new tasks arising in the control of robots which have been formulated and solved for the first time. One of these novelties is nonadaptive control synthesized for the case of large variations in payload parameters, under the condition that the practical stability of the overall system is satisfied. Such a case of control synthesis meets the actual today's needs in industrial robot applications. The second characteristic of the monograph is the efficient adaptive control algorithm based on decentralized control structure intended for tasks in which parameter variations cannot be specified in advance. To be objective, this is not the case in industrial robotics today. Thus, nonadaptive control with and without a particular parameter variation is supplemented by adaptive dynamic control algorithms which will cer tainly be applicable in the future industrial practice when parametric identification of workpieces will be required.
Download or read book Robotics written by Bruno Siciliano and published by Springer Science & Business Media. This book was released on 2010-08-20 with total page 644 pages. Available in PDF, EPUB and Kindle. Book excerpt: Based on the successful Modelling and Control of Robot Manipulators by Sciavicco and Siciliano (Springer, 2000), Robotics provides the basic know-how on the foundations of robotics: modelling, planning and control. It has been expanded to include coverage of mobile robots, visual control and motion planning. A variety of problems is raised throughout, and the proper tools to find engineering-oriented solutions are introduced and explained. The text includes coverage of fundamental topics like kinematics, and trajectory planning and related technological aspects including actuators and sensors. To impart practical skill, examples and case studies are carefully worked out and interwoven through the text, with frequent resort to simulation. In addition, end-of-chapter exercises are proposed, and the book is accompanied by an electronic solutions manual containing the MATLAB® code for computer problems; this is available free of charge to those adopting this volume as a textbook for courses.
