Download or read book Parallel Simulation of Coupled Flow and Geomechanics in Porous Media written by Bin Wang and published by . This book was released on 2015 with total page 386 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this research we consider developing a reservoir simulator capable of simulating complex coupled poromechanical processes on massively parallel computers. A variety of problems arising from petroleum and environmental engineering inherently necessitate the understanding of interactions between fluid flow and solid mechanics. Examples in petroleum engineering include reservoir compaction, wellbore collapse, sand production, and hydraulic fracturing. In environmental engineering, surface subsidence, carbon sequestration, and waste disposal are also coupled poromechanical processes. These economically and environmentally important problems motivate the active pursuit of robust, efficient, and accurate simulation tools for coupled poromechanical problems. Three coupling approaches are currently employed in the reservoir simulation community to solve the poromechanics system, namely, the fully implicit coupling (FIM), the explicit coupling, and the iterative coupling. The choice of the coupling scheme significantly affects the efficiency of the simulator and the accuracy of the solution. We adopt the fixed-stress iterative coupling scheme to solve the coupled system due to its advantages over the other two. Unlike the explicit coupling, the fixed-stress split has been theoretically proven to converge to the FIM for linear poroelasticity model. In addition, it is more efficient and easier to implement than the FIM. Our computational results indicate that this approach is also valid for multiphase flow. We discretize the quasi-static linear elasticity model for geomechanics in space using the continuous Galerkin (CG) finite element method (FEM) on general hexahedral grids. Fluid flow models are discretized by locally mass conservative schemes, specifically, the mixed finite element method (MFE) for the equation of state compositional flow on Cartesian grids and the multipoint flux mixed finite element method (MFMFE) for the single phase and two-phase flows on general hexahedral grids. While both the MFE and the MFMFE generate cell-centered stencils for pressure, the MFMFE has advantages in handling full tensor permeabilities and general geometry and boundary conditions. The MFMFE also obtains accurate fluxes at cell interfaces. These characteristics enable the simulation of more practical problems. For many reservoir simulation applications, for instance, the carbon sequestration simulation, we need to account for thermal effects on the compositional flow phase behavior and the solid structure stress evolution. We explicitly couple the poromechanics equations to a simplified energy conservation equation. A time-split scheme is used to solve heat convection and conduction successively. For the convection equation, a higher order Godunov method is employed to capture the sharp temperature front; for the conduction equation, the MFE is utilized. Simulations of coupled poromechanical or thermoporomechanical processes in field scales with high resolution usually require parallel computing capabilities. The flow models, the geomechanics model, and the thermodynamics model are modularized in the Integrated Parallel Accurate Reservoir Simulator (IPARS) which has been developed at the Center for Subsurface Modeling at the University of Texas at Austin. The IPARS framework handles structured (logically rectangular) grids and was originally designed for element-based data communication, such as the pressure data in the flow models. To parallelize the node-based geomechanics model, we enhance the capabilities of the IPARS framework for node-based data communication. Because the geomechanics linear system is more costly to solve than those of flow and thermodynamics models, the performance of linear solvers for the geomechanics model largely dictates the speed and scalability of the coupled simulator. We use the generalized minimal residual (GMRES) solver with the BoomerAMG preconditioner from the hypre library and the geometric multigrid (GMG) solver from the UG4 software toolbox to solve the geomechanics linear system. Additionally, the multilevel k-way mesh partitioning algorithm from METIS is used to generate high quality mesh partitioning to improve solver performance. Numerical examples of coupled poromechanics and thermoporomechanics simulations are presented to show the capabilities of the coupled simulator in solving practical problems accurately and efficiently. These examples include a real carbon sequestration field case with stress-dependent permeability, a synthetic thermoporoelastic reservoir simulation, poroelasticity simulations on highly distorted hexahedral grids, and parallel scalability tests on a massively parallel computer.

Download or read book Simulation of Flow in Porous Media written by Peter Bastian and published by Walter de Gruyter. This book was released on 2013-07-31 with total page 224 pages. Available in PDF, EPUB and Kindle. Book excerpt: Subsurface flow problems are inherently multiscale in space due to the large variability of material properties and in time due to the coupling of many different physical processes, such as advection, diffusion, reaction and phase exchange. Subsurface flow models still need considerable development. For example, nonequilibrium effects, entrapped air, anomalous dispersion and hysteresis effects can still not be adequately described. Moreover, parameters of the models are diffcult to access and often uncertain. Computational issues in subsurface flows include the treatment of strong heterogeneities and anisotropies in the models, the effcient solution of transport-reaction problems with many species, treatment of multiphase-multicomponent flows and the coupling of subsurface flow models to surface flow models given by shallow water or Stokes equations. With respect to energy and the environment, in particular the modelling and simulation of radioactive waste management and sequestration of CO2 underground have gained high interest in the community in recent years. Both applications provide unique challenges ranging from modelling of clay materials to treating very large scale models with high-performance computing. This book brings together key numerical mathematicians whose interest is in the analysis and computation of multiscale subsurface flow and practitioners from engineering and industry whose interest is in the applications of these core problems.

Download or read book Efficient Algorithms for Flow Models Coupled with Geomechanics for Porous Media Applications written by Tameem Mohammad Almani and published by . This book was released on 2016 with total page 534 pages. Available in PDF, EPUB and Kindle. Book excerpt: The coupling between subsurface flow and reservoir geomechanics plays a critical role in obtaining accurate results for models involving reservoir deformation, surface subsidence, well stability, sand production, waste deposition, hydraulic fracturing, CO2 sequestration, and hydrocarbon recovery. From a pure computational point of view, such a coupling can be quite a challenging and complicated task. This stems from the fact that the constitutive equations governing geomechanical deformations are different in nature from those governing porous media flow. The geomechanical effects account for the influence of deformations in the porous media caused due to the pore pressure and can be very important especially in the case of stress-sensitive and fractured reservoirs. Considering that fractures are very much prevalent in the porous media and they have strong influence on the flow profiles, it is important to study coupled geomechanics and flow problems in fractured reservoirs. In this work, we pursue three main objectives: first, to rigorously design and analyze iterative and explicit coupling algorithms for coupling flow and geomechanics in both poro-elasitc and fractured poro-elastic reservoirs. The analysis of iterative coupling schemes relies on studying the equations satisfied by the difference of iterates and using a Banach contraction argument to derive geometric convergence (Banach fixed-point contraction) results. The analysis of explicit coupling schemes result in analogous stability estimates. In this work, conformal Galerkin is used for mechanics, and a mixed formulation, including the Multipoint Flux Mixed Finite Element method as a special case, is used for the flow model. For fractured poro-elastic media, our iteratively coupled schemes are adaptations, due to the presence of fractures, of the classical fixed stress-splitting scheme, in which fractures are treated as possibly non-planar interfaces. The second main objective in this work is to exploit the different time scales of the mechanics and flow problems. Due to its physical nature, the geomechanics problem can cope with a coarser time step compared to the flow problem. This makes the multirate coupling scheme, the one in which the flow problem takes several (finer) time steps within the same coarse mechanics time step, a natural candidate in this setting. Inspired by that, we rigorously formulate and analyze convergence properties of both multirate iterative and explicit coupling schemes in both poro-elastic and fractured poro-elastic reservoirs. In addition, our theoretically derived Banach contraction estimates are validated against numerical simulations. The third objective in this work is to optimize the solution strategy of the nonlinear flow model in coupled flow and mechanics schemes. The global inexact Newton method, combined with the line search backtracking algorithm along with heuristic forcing functions, can be efficiently employed to reduce the number of flow linear iterations, and hence, the overall CPU run time. We first validate these computational savings for challenging two-phase benchmark problems including the full SPE10 model. Motivated by the obtained results, we incorporate this strategy as a nonlinear solver framework to solve the nonlinear flow problem in multirate iteratively coupled schemes. This leads to a scheme that reduces both the number of flow and mechanics linear iterations efficiently. All our numerical implementations in this work are built on top of our in-house reservoir simulator (IPARS).

Download or read book USER S GUIDE of TOUGH2 EGS MP written by and published by . This book was released on 2013 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: TOUGH2-EGS-MP is a parallel numerical simulation program coupling geomechanics with fluid and heat flow in fractured and porous media, and is applicable for simulation of enhanced geothermal systems (EGS). TOUGH2-EGS-MP is based on the TOUGH2-MP code, the massively parallel version of TOUGH2. In TOUGH2-EGS-MP, the fully-coupled flow-geomechanics model is developed from linear elastic theory for thermo-poro-elastic systems and is formulated in terms of mean normal stress as well as pore pressure and temperature. Reservoir rock properties such as porosity and permeability depend on rock deformation, and the relationships between these two, obtained from poro-elasticity theories and empirical correlations, are incorporated into the simulation. This report provides the user with detailed information on the TOUGH2-EGS-MP mathematical model and instructions for using it for Thermal-Hydrological-Mechanical (THM) simulations. The mathematical model includes the fluid and heat flow equations, geomechanical equation, and discretization of those equations. In addition, the parallel aspects of the code, such as domain partitioning and communication between processors, are also included. Although TOUGH2-EGS-MP has the capability for simulating fluid and heat flows coupled with geomechanical effects, it is up to the user to select the specific coupling process, such as THM or only TH, in a simulation. There are several example problems illustrating applications of this program. These example problems are described in detail and their input data are presented. Their results demonstrate that this program can be used for field-scale geothermal reservoir simulation in porous and fractured media with fluid and heat flow coupled with geomechanical effects.

Download or read book On Some Problems in the Simulation of Flow and Transport Through Porous Media written by Sunil George Thomas and published by . This book was released on 2009 with total page 450 pages. Available in PDF, EPUB and Kindle. Book excerpt: The dynamic solution of multiphase flow through porous media is of special interest to several fields of science and engineering, such as petroleum, geology and geophysics, bio-medical, civil and environmental, chemical engineering and many other disciplines. A natural application is the modeling of the flow of two immiscible fluids (phases) in a reservoir. Others, that are broadly based and considered in this work include the hydrodynamic dispersion (as in reactive transport) of a solute or tracer chemical through a fluid phase. Reservoir properties like permeability and porosity greatly influence the flow of these phases. Often, these vary across several orders of magnitude and can be discontinuous functions. Furthermore, they are generally not known to a desired level of accuracy or detail and special inverse problems need to be solved in order to obtain their estimates. Based on the physics dominating a given sub-region of the porous medium, numerical solutions to such flow problems may require different discretization schemes or different governing equations in adjacent regions. The need to couple solutions to such schemes gives rise to challenging domain decomposition problems. Finally, on an application level, present day environment concerns have resulted in a widespread increase in CO2 capture and storage experiments across the globe. This presents a huge modeling challenge for the future. This research work is divided into sections that aim to study various inter-connected problems that are of significance in sub-surface porous media applications. The first section studies an application of mortar (as well as nonmortar, i.e., enhanced velocity) mixed finite element methods (MMFEM and EV-MFEM) to problems in porous media flow. The mortar spaces are first used to develop a multiscale approach for parabolic problems in porous media applications. The implementation of the mortar mixed method is presented for two-phase immiscible flow and some a priori error estimates are then derived for the case of slightly compressible single-phase Darcy flow. Following this, the problem of modeling flow coupled to reactive transport is studied. Applications of such problems include modeling bio-remediation of oil spills and other subsurface hazardous wastes, angiogenesis in the transition of tumors from a dormant to a malignant state, contaminant transport in groundwater flow and acid injection around well bores to increase the permeability of the surrounding rock. Several numerical results are presented that demonstrate the efficiency of the method when compared to traditional approaches. The section following this examines (non-mortar) enhanced velocity finite element methods for solving multiphase flow coupled to species transport on non-matching multiblock grids. The results from this section indicate that this is the recommended method of choice for such problems. Next, a mortar finite element method is formulated and implemented that extends the scope of the classical mortar mixed finite element method developed by Arbogast et al (12) for elliptic problems and Girault et al (62) for coupling different numerical discretization schemes. Some significant areas of application include the coupling of pore-scale network models with the classical continuum models for steady single-phase Darcy flow as well as the coupling of different numerical methods such as discontinuous Galerkin and mixed finite element methods in different sub-domains for the case of single phase flow (21, 109). These hold promise for applications where a high level of detail and accuracy is desired in one part of the domain (often associated with very small length scales as in pore-scale network models) and a much lower level of detail at other parts of the domain (at much larger length scales). Examples include modeling of the flow around well bores or through faulted reservoirs. The next section presents a parallel stochastic approximation method (68, 76) applied to inverse modeling and gives several promising results that address the problem of uncertainty associated with the parameters governing multiphase flow partial differential equations. For example, medium properties such as absolute permeability and porosity greatly influence the flow behavior, but are rarely known to even a reasonable level of accuracy and are very often upscaled to large areas or volumes based on seismic measurements at discrete points. The results in this section show that by using a few measurements of the primary unknowns in multiphase flow such as fluid pressures and concentrations as well as well-log data, one can define an objective function of the medium properties to be determined, which is then minimized to determine the properties using (as in this case) a stochastic analog of Newton's method. The last section is devoted to a significant and current application area. It presents a parallel and efficient iteratively coupled implicit pressure, explicit concentration formulation (IMPEC) (52-54) for non-isothermal compositional flow problems. The goal is to perform predictive modeling simulations for CO2 sequestration experiments. While the sections presented in this work cover a broad range of topics they are actually tied to each other and serve to achieve the unifying, ultimate goal of developing a complete and robust reservoir simulator. The major results of this work, particularly in the application of MMFEM and EV-MFEM to multiphysics couplings of multiphase flow and transport as well as in the modeling of EOS non-isothermal compositional flow applied to CO2 sequestration, suggest that multiblock/multimodel methods applied in a robust parallel computational framework is invaluable when attempting to solve problems as described in Chapter 7. As an example, one may consider a closed loop control system for managing oil production or CO2 sequestration experiments in huge formations (the "instrumented oil field"). Most of the computationally costly activity occurs around a few wells. Thus one has to be able to seamlessly connect the above components while running many forward simulations on parallel clusters in a multiblock and multimodel setting where most domains employ an isothermal single-phase flow model except a few around well bores that employ, say, a non-isothermal compositional model. Simultaneously, cheap and efficient stochastic methods as in Chapter 8, may be used to generate history matches of well and/or sensor-measured solution data, to arrive at better estimates of the medium properties on the fly. This is obviously beyond the scope of the current work but represents the over-arching goal of this research.

Download or read book Coupled Flow and Geomechanics in Porous and Fractured Media written by and published by . This book was released on 2012 with total page 16 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Numerical Mathematics and Advanced Applications ENUMATH 2019 written by Fred J. Vermolen and published by Springer Nature. This book was released on 2021-04-30 with total page 1185 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers outstanding papers presented at the European Conference on Numerical Mathematics and Advanced Applications (ENUMATH 2019). The conference was organized by Delft University of Technology and was held in Egmond aan Zee, the Netherlands, from September 30 to October 4, 2019. Leading experts in the field presented the latest results and ideas regarding the design, implementation and analysis of numerical algorithms, as well as their applications to relevant societal problems. ENUMATH is a series of conferences held every two years to provide a forum for discussing basic aspects and new trends in numerical mathematics and scientific and industrial applications, all examined at the highest level of international expertise. The first ENUMATH was held in Paris in 1995, with successive installments at various sites across Europe, including Heidelberg (1997), Jyvaskyla (1999), lschia Porto (2001), Prague (2003), Santiago de Compostela (2005), Graz (2007), Uppsala (2009), Leicester (2011), Lausanne (2013), Ankara (2015) and Bergen (2017).

Download or read book Three dimensional Modeling of Coupled Flow and Transport in Porous Media written by Anton Leijnse and published by . This book was released on 1992 with total page 502 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Mechanics of Porous Continua written by Olivier Coussy and published by Wiley. This book was released on 1995-12-05 with total page 472 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a unified and systematic continuum approach for engineers and applied physicists working on the modelling of porous media. Self-contained, it sets out—from a macroscopic point of view—the main concepts and results of deformable porous media subject to the flow of one or several fluids. The theory presented includes developments in the areas of thermodynamics, poroelastoplasticity, poroviscoplasticity, wave propagation and surfaces of discontinuity, boundary value problems and numerical methods, as well as chemico-mechanical couplings. It can be used for numerous diversified applications in geophysics, civil engineering, biomechanics, material science, etc.

Download or read book Thermo Hydro Mechanical Coupling in Fractured Rock written by Hans-Joachim Kümpel and published by Springer Science & Business Media. This book was released on 2003-03-21 with total page 364 pages. Available in PDF, EPUB and Kindle. Book excerpt: The supply and protection of groundwater, the production of hydrocarbon reservoirs, land subsidence in coastal areas, exploitation of geothermal energy, the long-term disposal of critical wastes ... What do these issues have in common besides their high socio-economic impact? They are all closely related to fluid flow in porous and/or fractured rock. As the conditions of fluid flow in many cases depend on the mechanical behavior of rocks, coupling between the liquid phase and the rock matrix can generally not be neglected. For the past five years or so, studies of rock physics and rock mechanics linked to coupling phenomena have received increased attention. In recognition of this, a Euroconference on thermo-hydro-mechanical coupling in fractured rock was held at Bad Honnef, Germany, in November 2000. Most of the twenty papers collected in this volume were presented at this meeting. The contributions lead to deeper insight in processes where such coupling is relevant.

Download or read book Geomechanics in Reservoir Simulation written by Pascal Longuemare and published by Editions TECHNIP. This book was released on 2002 with total page 208 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Modeling Density Driven Flow in Porous Media written by Ekkehard O. Holzbecher and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 308 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modeling of flow and transport in groundwater has become an important focus of scientific research in recent years. Most contributions to this subject deal with flow situations, where density and viscosity changes in the fluid are neglected. This restriction may not always be justified. The models presented in the book demonstrate immpressingly that the flow pattern may be completely different when density changes are taken into account. The main applications of the models are: thermal and saline convection, geothermal flow, saltwater intrusion, flow through salt formations etc. This book not only presents basic theory, but the reader can also test his knowledge by applying the included software and can set up own models.

Download or read book Computational Methods for Multiphase Flows in Porous Media written by Zhangxin Chen and published by SIAM. This book was released on 2006-01-01 with total page 556 pages. Available in PDF, EPUB and Kindle. Book excerpt: Computational Methods for Multiphase Flows in Porous Media offers a fundamental and practical introduction to the use of computational methods, particularly finite element methods, in the simulation of fluid flows in porous media. It is the first book to cover a wide variety of flows, including single-phase, two-phase, black oil, volatile, compositional, nonisothermal, and chemical compositional flows in both ordinary porous and fractured porous media. In addition, a range of computational methods are used, and benchmark problems of nine comparative solution projects organized by the Society of Petroleum Engineers are presented for the first time in book form. The book reviews multiphase flow equations and computational methods to introduce basic terminologies and notation. A thorough discussion of practical aspects of the subjects is presented in a consistent manner, and the level of treatment is rigorous without being unnecessarily abstract. Audience: this book can be used as a textbook for graduate or advanced undergraduate students in geology, petroleum engineering, and applied mathematics; as a reference book for professionals in these fields, as well as scientists working in the area of petroleum reservoir simulation; as a handbook for employees in the oil industry who need a basic understanding of modeling and computational method concepts; and by researchers in hydrology, environmental remediation, and some areas of biological tissue modeling. Calculus, physics, and some acquaintance with partial differential equations and simple matrix algebra are necessary prerequisites.

Download or read book Mathematical and Numerical Modeling in Porous Media written by Martin A. Diaz Viera and published by CRC Press. This book was released on 2012-07-24 with total page 370 pages. Available in PDF, EPUB and Kindle. Book excerpt: Porous media are broadly found in nature and their study is of high relevance in our present lives. In geosciences porous media research is fundamental in applications to aquifers, mineral mines, contaminant transport, soil remediation, waste storage, oil recovery and geothermal energy deposits. Despite their importance, there is as yet no complete

Download or read book Fluid Flow in Fractured Porous Media written by Richeng Liu and published by MDPI. This book was released on 2019-09-30 with total page 578 pages. Available in PDF, EPUB and Kindle. Book excerpt: The fluid flow in fracture porous media plays a significant role in the assessment of deep underground reservoirs, such as through CO2 sequestration, enhanced oil recovery, and geothermal energy development. Many methods have been employed—from laboratory experimentation to theoretical analysis and numerical simulations—and allowed for many useful conclusions. This Special Issue aims to report on the current advances related to this topic. This collection of 58 papers represents a wide variety of topics, including on granite permeability investigation, grouting, coal mining, roadway, and concrete, to name but a few. We sincerely hope that the papers published in this Special Issue will be an invaluable resource for our readers.

Download or read book Finite Element Methods for Navier Stokes Equations written by Vivette Girault and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 386 pages. Available in PDF, EPUB and Kindle. Book excerpt: The material covered by this book has been taught by one of the authors in a post-graduate course on Numerical Analysis at the University Pierre et Marie Curie of Paris. It is an extended version of a previous text (cf. Girault & Raviart [32J) published in 1979 by Springer-Verlag in its series: Lecture Notes in Mathematics. In the last decade, many engineers and mathematicians have concentrated their efforts on the finite element solution of the Navier-Stokes equations for incompressible flows. The purpose of this book is to provide a fairly comprehen sive treatment of the most recent developments in that field. To stay within reasonable bounds, we have restricted ourselves to the case of stationary prob lems although the time-dependent problems are of fundamental importance. This topic is currently evolving rapidly and we feel that it deserves to be covered by another specialized monograph. We have tried, to the best of our ability, to present a fairly exhaustive treatment of the finite element methods for inner flows. On the other hand however, we have entirely left out the subject of exterior problems which involve radically different techniques, both from a theoretical and from a practical point of view. Also, we have neither discussed the implemen tation of the finite element methods presented by this book, nor given any explicit numerical result. This field is extensively covered by Peyret & Taylor [64J and Thomasset [82].

Download or read book High Performance Computing Systems and Technologies in Scientific Research Automation of Control and Production written by Vladimir Jordan and published by Springer Nature. This book was released on 2023-01-25 with total page 326 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the 12th International Conference on High-Performance Computing Systems and Technologies in Scientific Research, Automation of Control and Production, HPCST 2022, held in Barnaul, Russia, during May 20–21, 2022. The 23 full papers included in this book were carefully reviewed and selected from 116 submissions. They were organized in topical sections as follows: hardware for high-performance computing and signal processing; information technologies and computer simulation of physical phenomena; computing technologies in data analysis and decision making; and computing technologies in information security applications.