Download or read book Parallel Computing Fundamentals Applications and New Directions written by E.H. D'Hollander and published by Elsevier. This book was released on 1998-07-22 with total page 765 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume gives an overview of the state-of-the-art with respect to the development of all types of parallel computers and their application to a wide range of problem areas. The international conference on parallel computing ParCo97 (Parallel Computing 97) was held in Bonn, Germany from 19 to 22 September 1997. The first conference in this biannual series was held in 1983 in Berlin. Further conferences were held in Leiden (The Netherlands), London (UK), Grenoble (France) and Gent (Belgium). From the outset the aim with the ParCo (Parallel Computing) conferences was to promote the application of parallel computers to solve real life problems. In the case of ParCo97 a new milestone was reached in that more than half of the papers and posters presented were concerned with application aspects. This fact reflects the coming of age of parallel computing. Some 200 papers were submitted to the Program Committee by authors from all over the world. The final programme consisted of four invited papers, 71 contributed scientific/industrial papers and 45 posters. In addition a panel discussion on Parallel Computing and the Evolution of Cyberspace was held. During and after the conference all final contributions were refereed. Only those papers and posters accepted during this final screening process are included in this volume. The practical emphasis of the conference was accentuated by an industrial exhibition where companies demonstrated the newest developments in parallel processing equipment and software. Speakers from participating companies presented papers in industrial sessions in which new developments in parallel computing were reported.

Download or read book Parallel Computing written by E. D'Hollander and published by Imperial College Press. This book was released on 2000-01-01 with total page 770 pages. Available in PDF, EPUB and Kindle. Book excerpt: This millennium will see the increased use of parallel computing technologies at all levels of mainstream computing. Most computer hardware will use these technologies to achieve higher computing speeds, high speed access to very large distributed databases and greater flexibility through heterogeneous computing. These developments can be expected to result in the extended use of all types of parallel computers in virtually all areas of human endeavour. Computer-intensive problems in emerging areas such as financial modelling and multimedia systems, in addition to traditional application areas of parallel computing such as scientific computing and simulation, will stimulate the developments. Parallel computing as a field of scientific research and development will move from a niche concentrating on solving computer-intensive scientific and engineering problems to become one of the fundamental computing technologies. This book gives a retrospective view of what has been achieved in the parallel computing field during the past three decades, as well as a prospective view of expected future developments.

Download or read book Parallel Computational Fluid Dynamics 2000 written by C.B. Jenssen and published by Gulf Professional Publishing. This book was released on 2001-04-27 with total page 601 pages. Available in PDF, EPUB and Kindle. Book excerpt: Parallel CFD 2000, the Twelfth in an International series of meetings featuring computational fluid dynamics research on parallel computers, was held May 22-25, 2000 in Trondheim, Norway.Following the trend of the past conferences, areas such as numerical schemes and algorithms, tools and environments, load balancing, as well as interdisciplinary topics and various kinds of industrial applications were all well represented in the work presented. In addition, for the first time in the Parallel CFD conference series, the organizing committee chose to draw special attention to certain subject areas by organizing a number of special sessions.We feel the emphasis of the papers presented at the conference reflect the direction of the research within parallel CFD at the beginning of the new millennium. It seems to be a clear tendency towards increased industrial exploitation of parallel CFD. Several presentations also demonstrated how new insight is being achieved from complex simulations, and how powerful parallel computers now make it possible to use CFD within a broader interdisciplinary setting.Obviously, successful application of parallel CFD still rests on the underlying fundamental principles. Therefore, numerical algorithms, development tools, and parallelization techniques are still as important as when parallel CFD was in is infancy. Furthermore, the novel concepts of affordable parallel computing as well as metacomputing show that exciting developments are still taking place.As is often pointed out however, the real power of parallel CFD comes from the combination of all the disciplines involved: Physics, mathematics, and computer science. This is probably one of the principal reasons for the continued popularity of the Parallel CFD Conferences series, as well as the inspiration behind much of the excellent work carried out on the subject. We hope that the papers in this book, both on an individual basis and as a whole, will contribute to that inspiration. Further details of Parallel CFD'99, as well as other conferences in this series, are available at http://www.parcfd.org

Download or read book High Performance Scientific and Engineering Computing written by Hans-Joachim Bungartz and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 463 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since the creation of the term "Scientific Computing" and of its German counterpart "Wissenschaftliches Rechnen" (whoever has to be blamed for that), scientists from outside the field have been confused about the some what strange distinction between scientific and non-scientific computations. And the insiders, i. e. those who are, at least, convinced of always comput ing in a very scientific way, are far from being happy with this summary of their daily work, even if further characterizations like "High Performance" or "Engineering" try to make things clearer - usually with very modest suc cess, however. Moreover, to increase the unfortunate confusion of terms, who knows the differences between "Computational Science and Engineering" , as indicated in the title of the series these proceedings were given the honour to be published in, and "Scientific and Engineering Computing", as chosen for the title of our book? Actually, though the protagonists of scientific com puting persist in its independence as a scientific discipline (and rightly so, of course), the ideas behind the term diverge wildly. Consequently, the variety of answers one can get to the question "What is scientific computing?" is really impressive and ranges from the (serious) "nothing else but numerical analysis" up to the more mocking "consuming as much CPU-time as possible on the most powerful number crunchers accessible" .

Download or read book Parallel Computing Technologies written by Victor Malyshkin and published by Springer. This book was released on 2003-06-30 with total page 524 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the 6th International Conference on Parallel Computing Technologies, PaCT 2001, held in Novosibirsk, Russia in September 2001. The 36 revised full papers and 13 posters presented together with 4 invited papers were carefully reviewed and selected from 81 submissions. The papers presented span the whole range of parallel processing from theory and software through architecture and applications. Among the topics addressed are shared memory systems, formal methods, networks of processes, cellular automata, mobile data access systems, Java programming, neuro-cluster computing, network clusters, load balancing, etc.

Download or read book Euro Par 99 Parallel Processing written by Patrick Amestoy and published by Springer. This book was released on 2003-05-21 with total page 1503 pages. Available in PDF, EPUB and Kindle. Book excerpt: Euro-Parisaninternationalconferencededicatedtothepromotionandadvan- ment of all aspects of parallel computing. The major themes can be divided into the broad categories of hardware, software, algorithms and applications for p- allel computing. The objective of Euro-Par is to provide a forum within which to promote the development of parallel computing both as an industrial te- nique and an academic discipline, extending the frontier of both the state of the art and the state of the practice. This is particularly important at a time when parallel computing is undergoing strong and sustained development and experiencing real industrial take-up. The main audience for and participants in Euro-Parareseenasresearchersinacademicdepartments,governmentlabora- ries and industrial organisations. Euro-Par’s objective is to become the primary choice of such professionals for the presentation of new results in their specic areas. Euro-Par is also interested in applications which demonstrate the e - tiveness of the main Euro-Par themes. There is now a permanent Web site for the series http://brahms. fmi. uni-passau. de/cl/europar where the history of the conference is described. Euro-Par is now sponsored by the Association of Computer Machinery and the International Federation of Information Processing. Euro-Par’99 The format of Euro-Par’99follows that of the past four conferences and consists of a number of topics eachindividually monitored by a committee of four. There were originally 23 topics for this year’s conference. The call for papers attracted 343 submissions of which 188 were accepted. Of the papers accepted, 4 were judged as distinguished, 111 as regular and 73 as short papers.

Download or read book Parallel Computation written by Peter Zinterhof and published by Springer. This book was released on 2003-05-21 with total page 612 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the 4th International Conference on Parallel Computation, ACPC'99, held in Salzburg, Austria in February 1999; the conference included special tracks on parallel numerics and on parallel computing in image processing, video processing, and multimedia. The volume presents 50 revised full papers selected from a total of 75 submissions. Also included are four invited papers and 15 posters. The papers are organized in topical sections on linear algebra, differential equations and interpolation, (Quasi-)Monte Carlo methods, numerical software, numerical applications, image segmentation and image understanding, motion estimation and block matching, video processing, wavelet techniques, satellite image processing, data structures, data partitioning, resource allocation and performance analysis, cluster computing, and simulation and applications.

Download or read book Vector and Parallel Processing VECPAR 2000 written by Jose M.L.M. Palma and published by Springer. This book was released on 2003-06-29 with total page 584 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is the ?nal outcome of VECPAR 2000 – 4th International Meeting on Vector and Parallel Processing. VECPAR constitutes a series of conferences, which have been organized by the Faculty of Engineering of the University of Porto since 1993, with the main objective of disseminating new knowledge on parallel computing. Readership of This Book The book is aimed at an audience of researchers and graduate students in a broad range of scienti?c areas, including not only computer science, but also applied mathematics and numerical analysis, physics, and engineering. Book Plan From a total of 66 papers selected on the basis of extended abstracts for p- sentation at the conference, a subset of 34 papers were chosen during a second review process leading to their inclusion in the book, together with the invited talks. The book contains a total of 40 papers organized into 6 chapters, where each may appeal to people in di?erent but still related scienti?c areas. All ch- ters, with the exception of Chapter 6, are initiated by a short text, providing a quick overview of the organization and papers in the chapter. The 13 papers in Chapter 1 cover the aspects related to the use of multiple processors. Operating systems, languages and software tools for scheduling, and code transformation are the topics included in this chapter, initiated by the talk on computing over the Internet, entitled Grid Computing,byIan Foster.

Download or read book Parallel Computing written by and published by . This book was released on with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Euro Par 2000 Parallel Processing written by Arndt Bode and published by Springer. This book was released on 2003-06-26 with total page 1372 pages. Available in PDF, EPUB and Kindle. Book excerpt: Euro-Par – the European Conference on Parallel Computing – is an international conference series dedicated to the promotion and advancement of all aspects of parallel computing. The major themes can be divided into the broad categories of hardware, software, algorithms, and applications for parallel computing. The objective of Euro-Par is to provide a forum within which to promote the dev- opment of parallel computing both as an industrial technique and an academic discipline, extending the frontier of both the state of the art and the state of the practice. This is particularlyimportant at a time when parallel computing is - dergoing strong and sustained development and experiencing real industrial take up. The main audience for and participants of Euro-Par are seen as researchers in academic departments, government laboratories, and industrial organisations. Euro-Par’s objective is to become the primarychoice of such professionals for the presentation of new results in their speci?c areas. Euro-Par is also interested in applications that demonstrate the e?ectiveness of the main Euro-Par themes. Euro-Par now has its own Internet domain with a permanent Web site where the historyof the conference series is described: http://www. euro-par. org. The Euro-Par conference series is sponsored bythe Association of Computer Machineryand the International Federation of Information Processing.

Download or read book Parallel Program Development for Cluster Computing written by José Cardoso Cunha and published by Nova Publishers. This book was released on 2001 with total page 402 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book is divided into two parts, the first one covering the concepts and methodologies, and the second describing the tools and integrated environments that were developed in those projects. In this way, we hope that the reader will find the book useful not only concerning an identification of current trends in parallel program development, but also concerning their practical illustration through concrete tools and environments.

Download or read book Task Scheduling for Parallel Systems written by Oliver Sinnen and published by John Wiley & Sons. This book was released on 2007-05-04 with total page 326 pages. Available in PDF, EPUB and Kindle. Book excerpt: A new model for task scheduling that dramatically improves the efficiency of parallel systems Task scheduling for parallel systems can become a quagmire of heuristics, models, and methods that have been developed over the past decades. The author of this innovative text cuts through the confusion and complexity by presenting a consistent and comprehensive theoretical framework along with realistic parallel system models. These new models, based on an investigation of the concepts and principles underlying task scheduling, take into account heterogeneity, contention for communication resources, and the involvement of the processor in communications. For readers who may be new to task scheduling, the first chapters are essential. They serve as an excellent introduction to programming parallel systems, and they place task scheduling within the context of the program parallelization process. The author then reviews the basics of graph theory, discussing the major graph models used to represent parallel programs. Next, the author introduces his task scheduling framework. He carefully explains the theoretical background of this framework and provides several examples to enable readers to fully understand how it greatly simplifies and, at the same time, enhances the ability to schedule. The second half of the text examines both basic and advanced scheduling techniques, offering readers a thorough understanding of the principles underlying scheduling algorithms. The final two chapters address communication contention in scheduling and processor involvement in communications. Each chapter features exercises that help readers put their new skills into practice. An extensive bibliography leads to additional information for further research. Finally, the use of figures and examples helps readers better visualize and understand complex concepts and processes. Researchers and students in distributed and parallel computer systems will find that this text dramatically improves their ability to schedule tasks accurately and efficiently.

Download or read book Euro Par 2006 Parallel Processing written by Wolfgang E. Nagel and published by Springer. This book was released on 2006-11-24 with total page 1228 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the 12th International Conference on Parallel Computing, Euro-Par 2006. The book presents 110 carefully reviewed, revised papers. Topics include support tools and environments; performance prediction and evaluation; scheduling and load balancing; compilers for high performance; parallel and distributed databases, data mining and knowledge discovery; grid and cluster computing: models, middleware and architectures; parallel computer architecure and instruction-level parallelism; distributed systems and algorithms, and more.

Download or read book Feynman And Computation written by Anthony Hey and published by CRC Press. This book was released on 2018-03-08 with total page 359 pages. Available in PDF, EPUB and Kindle. Book excerpt: Computational properties of use to biological organisms or to the construction of computers can emerge as collective properties of systems having a large number of simple equivalent components (or neurons). The physical meaning of content-addressable memory is described by an appropriate phase space flow of the state of a system. A model of such a system is given, based on aspects of neurobiology but readily adapted to integrated circuits. The collective properties of this model produce a content-addressable memory which correctly yields an entire memory from any subpart of sufficient size. The algorithm for the time evolution of the state of the system is based on asynchronous parallel processing. Additional emergent collective properties include some capacity for generalization, familiarity recognition, categorization, error correction, and time sequence retention. The collective properties are only weakly sensitive to details of the modeling or the failure of individual devices.

Download or read book Euro Par 2007 Parallel Processing written by Anne-Marie Kermarrec and published by Springer Science & Business Media. This book was released on 2007-08-14 with total page 982 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume constitutes the refereed proceedings of the 13th International Conference on Parallel Computing. The papers are organized into topical sections covering support tools and environments, performance prediction and evaluation, scheduling and load balancing, compilers for high performance, parallel and distributed databases, grid and cluster computing, peer-to-peer computing, distributed systems and algorithms, and more.

Download or read book Object Oriented Methods for Interoperable Scientific and Engineering Computing written by Michael E. Henderson and published by SIAM. This book was released on 1999-01-01 with total page 340 pages. Available in PDF, EPUB and Kindle. Book excerpt: Contains papers presented at the October 1998 SIAM Workshop on Object Oriented Methods for Interoperable Scientific and Engineering Computing that covered a variety of topics and issues related to designing and implementing computational tools for science and engineering.

Download or read book High Performance Computing in Science and Engineering 2000 written by E. Krause and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 546 pages. Available in PDF, EPUB and Kindle. Book excerpt: An overview of recent developments in high performance computing and simulation, with special emphasis on the industrial relevance of the presented results and methods. The book showcases an innovative combination of the state-of-the-art modeling, novel numerical algorithms and the use of leading-edge high-performance computing systems.