Download or read book Elements of Gas Turbine Propulsion written by Jack D. Mattingly and published by AIAA (American Institute of Aeronautics & Astronautics). This book was released on 2005 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text provides an introduction to gas turbine engines and jet propulsion for aerospace or mechanical engineers. The text is divided into four parts: introduction to aircraft propulsion; basic concepts and one-dimensional/gas dynamics; parametric (design point) and performance (off-design) analysis of air breathing propulsion systems; and analysis and design of major gas turbine engine components (fans, compressors, turbines, inlets, nozzles, main burners, and afterburners). Design concepts are introduced early (aircraft performance in introductory chapter) and integrated throughout. Written with extensive student input on the design of the book, the book builds upon definitions and gradually develops the thermodynamics, gas dynamics, and gas turbine engine principles.
Download or read book Aerothermodynamics of Gas Turbine and Rocket Propulsion written by Gordon C. Oates and published by AIAA. This book was released on 1997 with total page 476 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Aircraft Propulsion and Gas Turbine Engines written by Ahmed F. El-Sayed and published by CRC Press. This book was released on 2017-07-06 with total page 1524 pages. Available in PDF, EPUB and Kindle. Book excerpt: Aircraft Propulsion and Gas Turbine Engines, Second Edition builds upon the success of the book’s first edition, with the addition of three major topic areas: Piston Engines with integrated propeller coverage; Pump Technologies; and Rocket Propulsion. The rocket propulsion section extends the text’s coverage so that both Aerospace and Aeronautical topics can be studied and compared. Numerous updates have been made to reflect the latest advances in turbine engines, fuels, and combustion. The text is now divided into three parts, the first two devoted to air breathing engines, and the third covering non-air breathing or rocket engines.
Download or read book Gas Turbine Propulsion Systems written by Bernie MacIsaac and published by John Wiley & Sons. This book was released on 2011-08-29 with total page 350 pages. Available in PDF, EPUB and Kindle. Book excerpt: Major changes in gas turbine design, especially in the design and complexity of engine control systems, have led to the need for an up to date, systems-oriented treatment of gas turbine propulsion. Pulling together all of the systems and subsystems associated with gas turbine engines in aircraft and marine applications, Gas Turbine Propulsion Systems discusses the latest developments in the field. Chapters include aircraft engine systems functional overview, marine propulsion systems, fuel control and power management systems, engine lubrication and scavenging systems, nacelle and ancillary systems, engine certification, unique engine systems and future developments in gas turbine propulsion systems. The authors also present examples of specific engines and applications. Written from a wholly practical perspective by two authors with long careers in the gas turbine & fuel systems industries, Gas Turbine Propulsion Systems provides an excellent resource for project and program managers in the gas turbine engine community, the aircraft OEM community, and tier 1 equipment suppliers in Europe and the United States. It also offers a useful reference for students and researchers in aerospace engineering.
Download or read book Gas Turbines and Jet Propulsion written by United States. National Bureau of Standards and published by . This book was released on 1947 with total page 54 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Elements of Propulsion written by Jack D. Mattingly and published by American Institute of Aeronautics and Astronautics Incorporated. This book was released on 2016 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Elements of Propulsion: Gas Turbines and Rockets, Second Edition provides a complete introduction to gas turbine and rocket propulsion for aerospace and mechanical engineers. Textbook coverage has been revised and expanded, including a new chapter on compressible flow. Design concepts are introduced early and integrated throughout. Written with extensive student input, the book builds upon definitions and gradually develops the thermodynamics, gas dynamics, rocket engine analysis, and gas turbine engine principles.
Download or read book Jet Propulsion written by N. A. Cumpsty and published by Cambridge University Press. This book was released on 2003-08-14 with total page 326 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the second edition of Cumpsty's excellent self-contained introduction to the aerodynamic and thermodynamic design of modern civil and military jet engines. Through two engine design projects, first for a new large passenger aircraft, and second for a new fighter aircraft, the text introduces, illustrates and explains the important facets of modern engine design. Individual sections cover aircraft requirements and aerodynamics, principles of gas turbines and jet engines, elementary compressible fluid mechanics, bypass ratio selection, scaling and dimensional analysis, turbine and compressor design and characteristics, design optimization, and off-design performance. The book emphasises principles and ideas, with simplification and approximation used where this helps understanding. This edition has been thoroughly updated and revised, and includes a new appendix on noise control and an expanded treatment of combustion emissions. Suitable for student courses in aircraft propulsion, but also an invaluable reference for engineers in the engine and airframe industry.
Download or read book Aircraft Engine Design written by Jack D. Mattingly and published by AIAA. This book was released on 2002 with total page 732 pages. Available in PDF, EPUB and Kindle. Book excerpt: Annotation A design textbook attempting to bridge the gap between traditional academic textbooks, which emphasize individual concepts and principles; and design handbooks, which provide collections of known solutions. The airbreathing gas turbine engine is the example used to teach principles and methods. The first edition appeared in 1987. The disk contains supplemental material. Annotation c. Book News, Inc., Portland, OR (booknews.com).
Download or read book Fundamentals of Aircraft and Rocket Propulsion written by Ahmed F. El-Sayed and published by Springer. This book was released on 2016-05-25 with total page 1025 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a comprehensive basics-to-advanced course in an aero-thermal science vital to the design of engines for either type of craft. The text classifies engines powering aircraft and single/multi-stage rockets, and derives performance parameters for both from basic aerodynamics and thermodynamics laws. Each type of engine is analyzed for optimum performance goals, and mission-appropriate engines selection is explained. Fundamentals of Aircraft and Rocket Propulsion provides information about and analyses of: thermodynamic cycles of shaft engines (piston, turboprop, turboshaft and propfan); jet engines (pulsejet, pulse detonation engine, ramjet, scramjet, turbojet and turbofan); chemical and non-chemical rocket engines; conceptual design of modular rocket engines (combustor, nozzle and turbopumps); and conceptual design of different modules of aero-engines in their design and off-design state. Aimed at graduate and final-year undergraduate students, this textbook provides a thorough grounding in the history and classification of both aircraft and rocket engines, important design features of all the engines detailed, and particular consideration of special aircraft such as unmanned aerial and short/vertical takeoff and landing aircraft. End-of-chapter exercises make this a valuable student resource, and the provision of a downloadable solutions manual will be of further benefit for course instructors.
Download or read book Aircraft Propulsion written by Saeed Farokhi and published by John Wiley & Sons. This book was released on 2014-04-01 with total page 1052 pages. Available in PDF, EPUB and Kindle. Book excerpt: New edition of the successful textbook updated to include new material on UAVs, design guidelines in aircraft engine component systems and additional end of chapter problems Aircraft Propulsion, Second Edition follows the successful first edition textbook with comprehensive treatment of the subjects in airbreathing propulsion, from the basic principles to more advanced treatments in engine components and system integration. This new edition has been extensively updated to include a number of new and important topics. A chapter is now included on General Aviation and Uninhabited Aerial Vehicle (UAV) Propulsion Systems that includes a discussion on electric and hybrid propulsion. Propeller theory is added to the presentation of turboprop engines. A new section in cycle analysis treats Ultra-High Bypass (UHB) and Geared Turbofan engines. New material on drop-in biofuels and design for sustainability is added to refl ect the FAA’s 2025 Vision. In addition, the design guidelines in aircraft engine components are expanded to make the book user friendly for engine designers. Extensive review material and derivations are included to help the reader navigate through the subject with ease. Key features: General Aviation and UAV Propulsion Systems are presented in a new chapter Discusses Ultra-High Bypass and Geared Turbofan engines Presents alternative drop-in jet fuels Expands on engine components' design guidelines The end-of-chapter problem sets have been increased by nearly 50% and solutions are available on a companion website Presents a new section on engine performance testing and instrumentation Includes a new 10-Minute Quiz appendix (with 45 quizzes) that can be used as a continuous assessment and improvement tool in teaching/learning propulsion principles and concepts Includes a new appendix on Rules of Thumb and Trends in aircraft propulsion Aircraft Propulsion, Second Edition is a must-have textbook for graduate and undergraduate students, and is also an excellent source of information for researchers and practitioners in the aerospace and power industry.
Download or read book Fuel Effects on Operability of Aircraft Gas Turbine Combustors written by Meredith Colket and published by . This book was released on 2021 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: In summarizing the results obtained in the first five years of the National Jet Fuel Combustion Program (NJFCP), this book demonstrates that there is still much to be learned about the combustion of alternative jet fuels.
Download or read book Aerospace Propulsion Systems written by Thomas A. Ward and published by John Wiley & Sons. This book was released on 2010-05-17 with total page 557 pages. Available in PDF, EPUB and Kindle. Book excerpt: Aerospace Propulsion Systems is a unique book focusing on each type of propulsion system commonly used in aerospace vehicles today: rockets, piston aero engines, gas turbine engines, ramjets, and scramjets. Dr. Thomas A. Ward introduces each system in detail, imparting an understanding of basic engineering principles, describing key functionality mechanisms used in past and modern designs, and provides guidelines for student design projects. With a balance of theory, fundamental performance analysis, and design, the book is specifically targeted to students or professionals who are new to the field and is arranged in an intuitive, systematic format to enhance learning. Covers all engine types, including piston aero engines Design principles presented in historical order for progressive understanding Focuses on major elements to avoid overwhelming or confusing readers Presents example systems from the US, the UK, Germany, Russia, Europe, China, Japan, and India Richly illustrated with detailed photographs Cartoon panels present the subject in an interesting, easy-to-understand way Contains carefully constructed problems (with a solution manual available to the educator) Lecture slides and additional problem sets for instructor use Advanced undergraduate students, graduate students and engineering professionals new to the area of propulsion will find Aerospace Propulsion Systems a highly accessible guide to grasping the key essentials. Field experts will also find that the book is a very useful resource for explaining propulsion issues or technology to engineers, technicians, businessmen, or policy makers. Post-graduates involved in multi-disciplinary research or anybody interested in learning more about spacecraft, aircraft, or engineering would find this book to be a helpful reference. Lecture materials for instructors available at www.wiley.com/go/wardaero
Download or read book The History of North American Small Gas Turbine Aircraft Engines written by Richard A. Leyes and published by AIAA. This book was released on 1999 with total page 1022 pages. Available in PDF, EPUB and Kindle. Book excerpt: This landmark joint publication between the National Air and Space Museum and the American Institute of Aeronautics and Astronautics chronicles the evolution of the small gas turbine engine through its comprehensive study of a major aerospace industry. Drawing on in-depth interviews with pioneers, current project engineers, and company managers, engineering papers published by the manufacturers, and the tremendous document and artifact collections at the National Air and Space Museum, the book captures and memorializes small engine development from its earliest stage. Leyes and Fleming leap back nearly 50 years for a first look at small gas turbine engine development and the seven major corporations that dared to produce, market, and distribute the products that contributed to major improvements and uses of a wide spectrum of aircraft. In non-technical language, the book illustrates the broad-reaching influence of small turbinesfrom commercial and executive aircraft to helicopters and missiles deployed in recent military engagements. Detailed corporate histories and photographs paint a clear historical picture of turbine development up to the present. See for yourself why The History of North American Small Gas Turbine Aircraft Engines is the most definitive reference book in its field. The publication of The History of North American Small Gas Turbine Aircraft Engines represents an important milestone for the National Air and Space Museum (NASM) and the American Institute of Aeronautics and Astronautics (AIAA). For the first time, there is an authoritative study of small gas turbine engines, arguably one of the most significant spheres of aeronautical technology in the second half o
Download or read book Fundamentals of Jet Propulsion with Applications written by Ronald D. Flack and published by Cambridge University Press. This book was released on 2005-04-25 with total page 696 pages. Available in PDF, EPUB and Kindle. Book excerpt: This introductory 2005 text on air-breathing jet propulsion focuses on the basic operating principles of jet engines and gas turbines. Previous coursework in fluid mechanics and thermodynamics is elucidated and applied to help the student understand and predict the characteristics of engine components and various types of engines and power gas turbines. Numerous examples help the reader appreciate the methods and differing, representative physical parameters. A capstone chapter integrates the text material into a portion of the book devoted to system matching and analysis so that engine performance can be predicted for both on- and off-design conditions. The book is designed for advanced undergraduate and first-year graduate students in aerospace and mechanical engineering. A basic understanding of fluid dynamics and thermodynamics is presumed. Although aircraft propulsion is the focus, the material can also be used to study ground- and marine-based gas turbines and turbomachinery and some advanced topics in compressors and turbines.
Download or read book Powered Flight written by David R. Greatrix and published by Springer Science & Business Media. This book was released on 2012-01-25 with total page 536 pages. Available in PDF, EPUB and Kindle. Book excerpt: Whilst most contemporary books in the aerospace propulsion field are dedicated primarily to gas turbine engines, there is often little or no coverage of other propulsion systems and devices such as propeller and helicopter rotors or detailed attention to rocket engines. By taking a wider viewpoint, Powered Flight - The Engineering of Aerospace Propulsion aims to provide a broader context, allowing observations and comparisons to be made across systems that are overlooked by focusing on a single aspect alone. The physics and history of aerospace propulsion are built on step-by-step, coupled with the development of an appreciation for the mathematics involved in the science and engineering of propulsion. Combining the author’s experience as a researcher, an industry professional and a lecturer in graduate and undergraduate aerospace engineering, Powered Flight - The Engineering of Aerospace Propulsion covers its subject matter both theoretically and with an awareness of the practicalities of the industry. To ensure that the content is clear, representative but also interesting the text is complimented by a range of relevant graphs and photographs including representative engineering, in addition to several propeller performance charts. These items provide excellent reference and support materials for graduate and undergraduate projects and exercises. Students in the field of aerospace engineering will find that Powered Flight - The Engineering of Aerospace Propulsion supports their studies from the introductory stage and throughout more intensive follow-on studies.
Download or read book Aircraft Propulsion Systems Technology and Design written by Gordon C. Oates and published by AIAA. This book was released on 1989 with total page 544 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Design and Performance of Gas Turbine Power Plants written by William R. Hawthorne and published by Princeton University Press. This book was released on 2015-12-08 with total page 582 pages. Available in PDF, EPUB and Kindle. Book excerpt: Volume XI of the High Speed Aerodynamics and Jet Propulsion series. Edited by W.R. Hawthorne and W.T. Olson. This is a comprehensive presentation of basic problems involved in the design of aircraft gas turbines, including sections covering requirements and processes, experimental techniques, fuel injection, flame stabilization, mixing processes, fuels, combustion chamber development, materials for gas turbine applications, turbine blade vibration, and performance. Originally published in 1960. The Princeton Legacy Library uses the latest print-on-demand technology to again make available previously out-of-print books from the distinguished backlist of Princeton University Press. These editions preserve the original texts of these important books while presenting them in durable paperback and hardcover editions. The goal of the Princeton Legacy Library is to vastly increase access to the rich scholarly heritage found in the thousands of books published by Princeton University Press since its founding in 1905.
