Download or read book Building Construction Design From Principle to Detail written by José Luis Moro and published by Springer Nature. This book was released on with total page 1264 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Design For Maintainability Benchmarks For Quality Buildings written by Yit Lin Michael Chew and published by World Scientific Publishing Company. This book was released on 2018-03-20 with total page 219 pages. Available in PDF, EPUB and Kindle. Book excerpt: With the motto of 'doing it right the first time', this book focuses on spearheading the integration of designers, constructors and Facility Management, by providing easy-to-read tables summarising knowledge learned from past mistakes and maintainability benchmarks. Based on the predictive/preventive approach, the tables serve to define acceptable standards in design, construction and operation practices, to ensure the standard and quality of design, construction and maintenance practices for high maintainability at the outset of the planning/design stage. The text covers technical issues related to major components of a facility for basements, wet areas, façades, common areas, roofs and M&E.Related Link(s)

Download or read book Transformer and Reactor Procurement written by Gilson M. Bastos and published by Springer Nature. This book was released on 2022-09-19 with total page 544 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Green Book provides those involved in transformer procurement with comprehensive guidance on industry best practice to avoid wrong decisions. Transformers are one of the expensive components in the power system, and also contribute a large proportion of the losses. Transformers also have long lives - more than 40 years in many cases. Making the wrong decisions during the procurement process can have serious and long-lasting consequences.

Download or read book Paints and Varnishes Corrosion Protection of Steel Structrues by Protective Paint Systems Part 8 Development of Specifications for New Work and Maintenance ISO 12944 8 2017 written by Polska. Polski Komitet Normalizacyjny. Wydział Wydawnictw Normalizacyjnych and published by . This book was released on 2018 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Corrosion Control Through Organic Coatings written by Ole Øystein Knudsen and published by CRC Press. This book was released on 2017-04-28 with total page 308 pages. Available in PDF, EPUB and Kindle. Book excerpt: Corrosion Control Through Organic Coatings, Second Edition provides readers with useful knowledge of the practical aspects of corrosion protection with organic coatings and links this to ongoing research and development. Thoroughly updated and reorganized to reflect the latest advances, this new edition expands its coverage with new chapters on coating degradation, protective properties, coatings for submerged service, powder coatings, and chemical pretreatment. Maintaining its authoritative treatment of the subject, the book reviews such topics as corrosion-protective pigments, waterborne coatings, weathering, aging, and degradation of paint, and environmental impact of commonly used techniques including dry- and wet-abrasive blasting and hydrojetting. It also discusses theory and practice of accelerated testing of coatings to assist readers in developing more accurate tests and determine corrosion protection performance.

Download or read book Handbook of Hot dip Galvanization written by Peter Maaß and published by John Wiley & Sons. This book was released on 2011-03-31 with total page 460 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hot-dip galvanization is a method for coating steel workpieces with a protective zinc film to enhance the corrosion resistance and to improve the mechanical material properties. Hot-dip galvanized steel is the material of choice underlying many modern buildings and constructions, such as train stations, bridges and metal domes. Based on the successful German version, this edition has been adapted to include international standards, regulations and best practices. The book systematically covers all steps in hot-dip galvanization: surface pre-treatment, process and systems technology, environmental issues, and quality management. As a result, the reader finds the fundamentals as well as the most important aspects of process technology and technical equipment, alongside contributions on workpiece requirements for optimal galvanization results and methods for applying additional protective coatings to the galvanized pieces. With over 200 illustrated examples, step-by-step instructions, presentations and reference tables, this is essential reading for apprentices and professionals alike.

Download or read book Materials for Architects and Builders written by Arthur Lyons and published by Routledge. This book was released on 2014-08-21 with total page 512 pages. Available in PDF, EPUB and Kindle. Book excerpt: Materials for Architects and Builders provides a clear and concise introduction to the broad range of materials used within the construction industry and covers the essential details of their manufacture, key physical properties, specification and uses. Understanding the basics of materials is a crucial part of undergraduate and diploma construction or architecture-related courses, and this established textbook helps the reader to do just that with the help of colour photographs and clear diagrams throughout. This new edition has been completely revised and updated to include the latest developments in materials research, new images, appropriate technologies and relevant legislation. The ecological effects of building construction and lifetime use remain an important focus, and this new edition includes a wide range of energy saving building components.

Download or read book Applied Metallurgy and Corrosion Control written by Amiya Kumar Lahiri and published by Springer. This book was released on 2017-08-23 with total page 558 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book serves as a comprehensive resource on metals and materials selection for the petrochemical industrial sector. The petrochemical industry involves large scale investments, and to maintain profitability the plants are to be operated with minimum downtime and failure of equipment, which can also cause safety hazards. To achieve this objective proper selection of materials, corrosion control, and good engineering practices must be followed in both the design and the operation of plants. Engineers and professional of different disciplines involved in these activities are required to have some basic understanding of metallurgy and corrosion. This book is written with the objective of servings as a one-stop shop for these engineering professionals. The book first covers different metallic materials and their properties, metal forming processes, welding, and corrosion and corrosion control measures. This is followed by considerations in material selection and corrosion control in three major industrial sectors, oil & gas production, oil refinery, and fertilizers. The importance of pressure vessel codes as well as inspection and maintenance repair practices have also been highlighted. The book will be useful for technicians and entry level engineers in these industrial sectors. Additionally, the book may also be used as primary or secondary reading for graduate and professional coursework.

Download or read book Non Destructive Evaluation of Corrosion and Corrosion assisted Cracking written by Raman Singh and published by John Wiley & Sons. This book was released on 2019-04-09 with total page 448 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive text to the non-destructive evaluation of degradation of materials due to environment that takes an interdisciplinary approach Non-Destructive Evaluation of Corrosion and Corrosion-assisted Cracking is an important resource that covers the critical interdisciplinary topic of non-destructive evaluation of degradation of materials due to environment. The authors—noted experts in the field—offer an overview of the wide-variety of approaches to non-destructive evaluation and various types of corrosion. The text is filled with instructive case studies from a range of industries including aerospace, energy, defense, and processing. The authors review the most common non-destructive evaluation techniques that are applied in both research and industry in order to evaluate the properties and more importantly degradation of materials components or systems without causing damage. Ultrasonic, radiographic, thermographic, electromagnetic, and optical are some of the methods explored in the book. This important text: Offers a groundbreaking interdisciplinary approach to of non-destructive evaluation of corrosion and corrosion-assisted cracking Discusses techniques for non-destructive evaluation and various types of corrosion Includes information on the application of a variety of techniques as well as specific case studies Contains information targeting industries such as aerospace, energy, processing Presents information from leading researchers and technologists in both non-destructive evaluation and corrosion Written for life assessment and maintenance personnel involved in quality control, failure analysis, and R&D, Non-Destructive Evaluation of Corrosion and Corrosion-assisted Cracking is an essential interdisciplinary guide to the topic.

Download or read book Model Code for Service Life Design written by fib Fédération internationale du béton and published by fib Fédération internationale du béton. This book was released on 2006-01-01 with total page 128 pages. Available in PDF, EPUB and Kindle. Book excerpt: fib Bulletin 34 addresses Service Life Design (SLD) for plain concrete, reinforced concrete and pre-stressed concrete structures, with a special focus on design provisions for managing the adverse effects of degradation. Its objective is to identify agreed durability related models and to prepare the framework for standardization of performance based design approaches. Four different options for SLD are given: - a full probabilistic approach, - a semi probabilistic approach (partial factor design), - deemed to satisfy rules, - avoidance of deterioration. The service life design approaches described in this document may be applied for the design of new structures, for updating the service life design if the structure exists and real material properties and/or the interaction of environment and structure can be measured (real concrete covers, carbonation depths), and for calculating residual service life. The bulletin is divided into five chapters: 1. General 2. Basis of design 3. Verification of Service Life Design 4. Execution and its quality management 5. Maintenance and condition control It also includes four informative annexes, which give background information and examples of procedures and deterioration models for the application in SLD. The format of Bulletin 34 follows the CEB-FIP tradition for Model Codes: the main provisions are given on the right-hand side of the page, and on the left-hand side, the comments. Note: An Italian translation of Bulletin 34 is also available; contact us for further details.

Download or read book Design of Steel Structures to Eurocodes written by Ioannis Vayas and published by Springer. This book was released on 2018-11-23 with total page 627 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook describes the rules for the design of steel and composite building structures according to Eurocodes, covering the structure as a whole, as well as the design of individual structural components and connections. It addresses the following topics: the basis of design in the Eurocodes framework; the loads applied to building structures; the load combinations for the various limit states of design and the main steel properties and steel fabrication methods; the models and methods of structural analysis in combination with the structural imperfections and the cross-section classification according to compactness; the cross-section resistances when subjected to axial and shear forces, bending or torsional moments and to combinations of the above; component design and more specifically the design of components sensitive to instability phenomena, such as flexural, torsional and lateral-torsional buckling (a section is devoted to composite beams); the design of connections and joints executed by bolting or welding, including beam to column connections in frame structures; and alternative configurations to be considered during the conceptual design phase for various types of single or multi-storey buildings, and the design of crane supporting beams. In addition, the fabrication and erection procedures, as well as the related quality requirements and the quality control methods are extensively discussed (including the procedures for bolting, welding and surface protection). The book is supplemented by more than fifty numerical examples that explain in detail the appropriate procedures to deal with each particular problem in the design of steel structures in accordance with Eurocodes. The book is an ideal learning resource for students of structural engineering, as well as a valuable reference for practicing engineers who perform designs on basis of Eurocodes.

Download or read book Corrosion and Protection written by Einar Bardal and published by Springer Science & Business Media. This book was released on 2007-06-14 with total page 315 pages. Available in PDF, EPUB and Kindle. Book excerpt: Corrosion and Protection is an essential guide for mechanical, marine and civil engineering students and also provides a valuable reference for practicing engineers. Bardal combines a description of practical corrosion processes and problems with a theoretical explanation of the various types and forms of corrosion, with a central emphasis on the connections between practical problems and basic scientific principles. This well thought-out introduction to corrosion science, with excellent examples and useful tables, is also extremely well illustrated with 167 diagrams and photographs. Readers with a limited background in chemistry can also find it accessible.

Download or read book Corrosion of Metals and Alloys Basic Terms and Definitions written by British Standards Institute Staff and published by . This book was released on 2000-04-15 with total page 56 pages. Available in PDF, EPUB and Kindle. Book excerpt: Corrosion, Metals, Alloys, Vocabulary, Definitions

Download or read book High Performance Organic Coatings written by A S Khanna and published by Elsevier. This book was released on 2008-07-09 with total page 473 pages. Available in PDF, EPUB and Kindle. Book excerpt: Paint coatings remain the most widely used way of protecting steel structures from corrosion. This important book reviews the range of organic paint coatings and how their performance can be enhanced to provide effective and lasting protection.The book begins by reviewing key factors affecting the success of a coating, including surface preparation, methods of application, selecting an appropriate paint and testing its effectiveness. It also discusses why coatings fail, including how they degrade, and what can be done to prevent these problems. Part two describes the main types of coating and how their performance can be enhanced, including epoxies, polyester, glass flake, fluoropolymer, polysiloxane and waterborne coatings. The final part of the book looks at applications of high-performance organic coatings in such areas as reinforced concrete, pipelines, marine and automotive engineering.With its distinguished editor and international team of contributors, High-performance organic coatings is a valuable reference for all those concerned with preventing corrosion in steel and other metal structures. - Reviews the factors affecting the success of a coating - Describes the main types of coating and how their performance can be enhanced, including epoxies, polyester and waterborne coatings - Examines applications in such areas as reinforced concrete pipelines and marine engineering

Download or read book Carbon Containing Polymer Composites written by Mostafizur Rahaman and published by Springer. This book was released on 2018-10-05 with total page 582 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses the methods synthesizing various carbon materials, like graphite, carbon blacks, carbon fibers, carbon nanotubes, and graphene. It also details different functionalization and modification processes used to improve the properties of these materials and composites. From a geometrical–structural point of view, it examines different properties of the composites, such as mechanical, electrical, dielectric, thermal, rheological, morphological, spectroscopic, electronic, optical, and toxic, and describes the effects of carbon types and their geometrical structure on the properties and applications of composites.

Download or read book Code of Practice for Protective Coating of Iron and Steel Structures Against Corrosion Formerly CP 2008 written by British Standards Institution and published by . This book was released on 1977 with total page 110 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Handbook of Engineering Practice of Materials and Corrosion written by Jung-Chul (Thomas) Eun and published by Springer Nature. This book was released on 2020-09-04 with total page 885 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook is an in-depth guide to the practical aspects of materials and corrosion engineering in the energy and chemical industries. The book covers materials, corrosion, welding, heat treatment, coating, test and inspection, and mechanical design and integrity. A central focus is placed on industrial requirements, including codes, standards, regulations, and specifications that practicing material and corrosion engineers and technicians face in all roles and in all areas of responsibility. The comprehensive resource provides expert guidance on general corrosion mechanisms and recommends materials for the control and prevention of corrosion damage, and offers readers industry-tested best practices, rationales, and case studies.