Download or read book The Future of Packaging written by Tom Szaky and published by Berrett-Koehler Publishers. This book was released on 2019-02-05 with total page 321 pages. Available in PDF, EPUB and Kindle. Book excerpt: Outstanding Book of the Year gold medalist and “Most Likely to Save the Planet” from the Independent Book Publisher Awards. Tom Szaky sets out to do the impossible – eliminate all waste. This book paints a future of a “circular economy” that relies on responsible reuse and recycling to propel the world towards eradicating overconsumption and waste. Only 35 percent of the 240 million metric tons of waste generated in the United States alone gets recycled, according to the Environmental Protection Agency. This extraordinary collection shows how manufacturers can move from a one-way take-make-waste economy that is burying the world in waste to a circular, make-use-recycle economy. Steered by Tom Szaky, recycling pioneer, eco-capitalist, and founder and CEO of TerraCycle, each chapter is coauthored by an expert in his or her field. From the distinct perspectives of government leaders, consumer packaged goods companies, waste management firms, and more, the book explores current issues of production and consumption, practical steps for improving packaging and reducing waste today, and big ideas and concepts that can be carried forward. Intended to help every business from a small start-up to a large established consumer product company, this book serves as a source of knowledge and inspiration. The message from these pioneers is not to scale back but to innovate upward. They offer nothing less than a guide to designing ourselves out of waste and into abundance.

Download or read book Waste Management in the Fashion and Textile Industries written by Rajkishore Nayak and published by Woodhead Publishing. This book was released on 2021-01-07 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt: Waste Management in the Textiles Industry explores and explains the latest technologies and best practices for an integrated approach to the management and treatment of wastes generated in this industry. - Provides a strong technological analysis of the manufacturing supply chain, including spinning, fabric production, finishing, garment manufacture, and the packaging of clothing - Explains how textile technology perspectives feed into management decision-making about sustainability - Addresses the industry's impact on air and water quality and landfill waste

Download or read book Plastic Waste and Recycling written by Trevor Letcher and published by Academic Press. This book was released on 2020-03-10 with total page 688 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plastic Waste and Recycling: Environmental Impact, Societal Issues, Prevention, and Solutions begins with an introduction to the different types of plastic materials, their uses, and the concepts of reduce, reuse and recycle before examining plastic types, chemistry and degradation patterns that are organized by non-degradable plastic, degradable and biodegradable plastics, biopolymers and bioplastics. Other sections cover current challenges relating to plastic waste, explain the sources of waste and their routes into the environment, and provide systematic coverage of plastic waste treatment methods, including mechanical processing, monomerization, blast furnace feedstocks, gasification, thermal recycling, and conversion to fuel. This is an essential guide for anyone involved in plastic waste or recycling, including researchers and advanced students across plastics engineering, polymer science, polymer chemistry, environmental science, and sustainable materials. - Presents actionable solutions for reducing plastic waste, with a focus on the concepts of collection, re-use, recycling and replacement - Considers major societal and environmental issues, providing the reader with a broader understanding and supporting effective implementation - Includes detailed case studies from across the globe, offering unique insights into different solutions and approaches

Download or read book Can I Recycle This written by Jennie Romer and published by Penguin. This book was released on 2021-04-13 with total page 274 pages. Available in PDF, EPUB and Kindle. Book excerpt: “If you’ve ever been perplexed by the byzantine rules of recycling, you’re not alone…you’ll want to read Can I Recycle This?... An extensive look at what you can and cannot chuck into your blue bin.” —The Washington Post The first illustrated guidebook that answers the age-old question: Can I Recycle This? Since the dawn of the recycling system, men and women the world over have stood by their bins, holding an everyday object, wondering, "can I recycle this?" This simple question reaches into our concern for the environment, the care we take to keep our homes and our communities clean, and how we interact with our local government. Recycling rules seem to differ in every municipality, with exceptions and caveats at every turn, leaving the average American scratching her head at the simple act of throwing something away. Taking readers on a quick but informative tour of how recycling actually works (setting aside the propaganda we were all taught as kids), Can I Recycle This gives straightforward answers to whether dozens of common household objects can or cannot be recycled, as well as the information you need to make that decision for anything else you encounter. Jennie Romer has been working for years to help cities and states across America better deal with the waste we produce, helping draft meaningful legislation to help communities better process their waste and produce less of it in the first place. She has distilled her years of experience into this non-judgmental, easy-to-use guide that will change the way you think about what you throw away and how you do it.

Download or read book Light Metals 2014 written by John Grandfield and published by Springer. This book was released on 2016-12-23 with total page 1351 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Light Metals symposia are a key part of the TMS Annual Meeting & Exhibition, presenting the most recent developments, discoveries, and practices in primary aluminum science and technology. Publishing the proceedings from these important symposia, the Light Metals volume has become the definitive reference in the field of aluminum production and related light metal technologies. The 2014 collection includes papers from the following symposia: •Alumina and Bauxite •Aluminum Alloys: Fabrication, Characterization and Applications •Aluminum Processing •Aluminum Reduction Technology •Cast Shop for Aluminum Production •Electrode Technology for Aluminum Production •Light-metal Matrix (Nano)-composites

Download or read book Sustainable Packaging written by Subramanian Senthilkannan Muthu and published by Springer Nature. This book was released on 2021-09-07 with total page 329 pages. Available in PDF, EPUB and Kindle. Book excerpt: Packaging plays a major role in the environmental footprints of products from any industrial sector, and thus is important to address the sustainability issues of packaging. Packaging and the packaging sector have to be eco-conscious as there are many types of packaging across various industrial sectors and so are their environmental impacts as well. Plastic packaging is one of the most common element and the packaging sector accounts for almost 40% of plastic pollution in the world. Sustainable packaging is the only way forward to alleviate the environmental devastations from the the packaging sector. This book presents case studies and discusses how to make packaging more sustainable for a better future. ​

Download or read book Extended Producer Responsibility written by Collectif and published by OECD. This book was released on 2016-09-20 with total page 315 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report updates the 2001 Guidance Manual for Governments on Extended Producer Responsibility (EPR), which provided a broad overview of the key issues, general considerations, and the potential benefits and costs associated with producer responsibility for managing the waste generated by their products put on the market. Since then, EPR policies to help improve recycling and reduce landfilling have been widely adopted in most OECD countries; product coverage has been expanded in key sectors such as packaging, electronics, batteries and vehicles; and EPR schemes are spreading in emerging economies in Asia, Africa and South America, making it relevant to address the differing policy contexts in developing countries. In light of all of the changes in the broader global context, this updated review of the guidelines looks at some of the new design and implementation challenges and opportunities of EPR policies, takes into account recent efforts undertaken by governments to better assess the cost and environmental effectiveness of EPR and its overall impact on the market, and addresses some of the specific issues in emerging market economies.

Download or read book A Practical Guide to Plastics Sustainability written by Michel Biron and published by William Andrew. This book was released on 2020-04-18 with total page 691 pages. Available in PDF, EPUB and Kindle. Book excerpt: A Practical Guide to Plastics Sustainability: Concept, Solutions, and Implementation is a groundbreaking reference work offering a broad, detailed and highly practical vision of the complex concept of sustainability in plastics. The book's aim is to present a range of potential pathways towards more sustainable plastics parts and products, enabling the reader to further integrate the idea of sustainability into their design process. It begins by introducing the context and concept of sustainability, discussing perceptions, drivers of change, key factors, and environmental issues, before presenting a detailed outline of the current situation with types of plastics, processing, and opportunities for improved sustainability. Subsequent chapters focus on the different possibilities for improved sustainability, offering a step-by-step technical approach to areas including design, properties, renewable plastics, and recycling and re-use. Each of these pillars are supported by data, examples, analysis and best practice guidance. Finally, the latest developments and future possibilities are considered. - Approaches the idea of sustainability from numerous angles, offering practical solutions to improve sustainability in the development of plastic components and products - Explains how sustainability can be applied across plastics design, materials selection, processing, and end of life, all set alongside socioeconomic factors - Considers key areas of innovation, such as eco-design, novel opportunities for recycling or re-use, bio-based polymers and new technologies

Download or read book Food written by Christopher D. Mills and published by Nova Snova. This book was released on 2020-05-29 with total page 265 pages. Available in PDF, EPUB and Kindle. Book excerpt: Federal nutrition guidelines provide broad guidance for healthy populations, but do not focus on the varying nutritional needs of older adults. Chapter 1 examines (1) the relationship of older adults' nutrition to health outcomes and the extent to which federal nutrition guidelines address older adults' nutritional needs, (2) nutrition requirements in federal nutrition assistance programs serving older adults and how these requirements are overseen, and (3) challenges program providers face in meeting older adults' nutritional needs.The U.S. Department of Agriculture (USDA) and Food and Drug Administration (FDA) have taken steps to address consumer confusion about date labels on packaged foods. For example, to reduce confusion about introductory phrases on date labels, such as whether the dates indicate food is safe to eat, and resulting food waste, USDA in December 2016 issued a fact sheet on date labels for consumers. Chapter 2 describes the steps USDA and FDA have taken to address consumer confusion about date labels and examines the extent to which USDA and FDA have coordinated with each other and with nonfederal stakeholders on date labels.Chapter 3 reports on the challenges that exist to reducing food loss and waste (FLW) in the United States. Disease outbreaks from tainted food are an ongoing public health challenge. The Centers for Disease Control estimates that each year, one in six Americans, 48 million people, get sick from foodborne illnesses, 128,000 are hospitalized, and 3,000 die as reported in chapter 4.

Download or read book Plastic Waste Markets written by David McKinnon and published by Nordic Council of Ministers. This book was released on 2018-05-29 with total page 85 pages. Available in PDF, EPUB and Kindle. Book excerpt: This project examines the market for recycled plastic, with a primary focus on post-consumer plastic waste because this is considered to be the more problematic. The market for plastic waste generated in manufacturing and production is relatively strong and well-functioning; As a consequence, the majority of plastic waste from manufacturing and production is recycled. Post-consumer waste is much less homogenous: it comes from a wide variety of sources, and contains a wide variety of plastics and tends to be difficult to collect, sort, and recycle. This project identifies barriers to further utilisation of recycled plastics, and analyses a collection of policy tools that could be used to support and expand that market.

Download or read book Sustainable Waste Management Policies and Case Studies written by Sadhan Kumar Ghosh and published by Springer. This book was released on 2019-06-21 with total page 727 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book presents high-quality research papers from the Seventh International Conference on Solid Waste Management (IconSWM 2017), held at Professor Jayashankar Telangana State Agricultural University, Hyderabad on December 15–17, 2017. The conference, an official side event of the high-level Intergovernmental Eighth Regional 3R Forum in Asia and the Pacific, aimed to generate scientific inputs into the policy consultation of the Forum co-organized by the UNCRD/UNDESA, MoEFCC India, MOUD India and MOEJ, Japan. Presenting research on solid waste management from more than 30 countries, the book is divided into three volumes and addresses various issues related to innovation and implementation in sustainable waste management, segregation, collection, transportation of waste, treatment technology, policy and strategies, energy recovery, life cycle analysis, climate change, research and business opportunities.

Download or read book Managing municipal solid waste a review of achievements in 32 European countries written by European Environment Agency and published by . This book was released on 2013 with total page 36 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Eco Thrifty Living written by Zoe Morrison and published by . This book was released on 2019-07-09 with total page 190 pages. Available in PDF, EPUB and Kindle. Book excerpt: Learn how to spend less, be kinder to the environment and go in the direction of your dreams! Back in 2011 I became a parent for the second time and wanted to quit my job and be a stay at home mum. We had just moved house and increased our mortgage, now had two children to look after and I preferred to buy costly eco-friendly and organic products. How was I going to be able cut my spending by enough money to quit my job and stick to my eco-friendly principles? The challenge was set and a year later I did quit my job to become a stay at home mum and blogger. I saved far more money than I ever could have imagined by being eco-friendly! In this book I share with you what I have learned over the years of saving money and the environment. There are lots of practical hints and tips, which overall will help you to: 1. Make the most of what you have2. Reduce your rubbish3. Save you money4. Unleash your creative side. Topics covered in the book include:1.Kitchen waste2.Stuff3.Sustainable fashion4.Cleaning5.Bathroom6.Entertainment7.Celebrations and special occasions8.Energy9.Getting fit10.Kids11.GardeningIf you think freeing up some cash could help improve your life, you care about the environment and you are ready to do things differently, then this is the book for you! Zoe Morrison is the author of award winning blog www.ecothriftyliving.com. She is regularly interviewed on BBC Radio and she has been featured in newspapers around the world.

Download or read book Sustainable Food Packaging Technology written by Athanassia Athanassiou and published by John Wiley & Sons. This book was released on 2021-05-10 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt: Towards more sustainable packaging with biodegradable materials! The combination of the continuously increasing food packaging waste with the non-biodegradable nature of the plastic materials that have a big slice of the packaging market makes it necessary to move towards sustainable packaging for the benefit of the environment and human health. Sustainable packaging is the type of packaging that can provide to food the necessary protection conditions, but at the same type is biodegradable and can be disposed as organic waste to the landfills in order to biodegrade through a natural procedure. In this way, sustainable packaging becomes part of the circular economy. ?Sustainable Food Packaging Technology? deals with packaging solutions that use engineered biopolymers or biocomposites that have suitable physicochemical properties for food contact and protection and originate both from renewable or non-renewable resources, but in both cases are compostable or edible. Modified paper and cardboard with increased protective properties towards food while keeping their compostability are presented as well. The book also covers natural components that can make the packaging functional, e.g., by providing active protection to the food indicating food spoilage. * Addresses urgent problems: food packaging creates a lot of hard-to-recycle waste - this book puts forward more sustainable solutions using biodegradable materials * State-of-the-art: ?Sustainable Food Packaging Technology? provides knowledge on new developments in functional packaging * From lab to large-scale applications: expert authors report on the technology aspects of sustainable packaging

Download or read book Integrated Solid Waste Management A Lifecycle Inventory written by P.R. White and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 374 pages. Available in PDF, EPUB and Kindle. Book excerpt: Life is often considered to be a journey. The lifecycle of waste can similarly be considered to be a journey from the cradle (when an item becomes valueless and, usually, is placed in the dustbin) to the grave (when value is restored by creating usable material or energy; or the waste is transformed into emissions to water or air, or into inert material placed in a landfill). This preface provides a route map for the journey the reader of this book will undertake. Who? Who are the intended readers of this book? Waste managers (whether in public service or private companies) will find a holistic approach for improving the environmental quality and the economic cost of managing waste. The book contains general principles based on cutting edge experience being developed across Europe. Detailed data and a computer model will enable operations managers to develop data-based improvements to their systems. Producers oj waste will be better able to understand how their actions can influence the operation of environmentally improved waste management systems. Designers oj products and packages will be better able to understand how their design criteria can improve the compatibility of their product or package with developing, environmentally improved waste management systems. Waste data specialists (whether in laboratories, consultancies or environ mental managers of waste facilities) will see how the scope, quantity and quality of their data can be improved to help their colleagues design more effective waste management systems.

Download or read book Plastic Films in Food Packaging written by Sina Ebnesajjad and published by William Andrew. This book was released on 2012-12-31 with total page 413 pages. Available in PDF, EPUB and Kindle. Book excerpt: The value of the groceries purchases in the USA is over $500 billion annually, most of which is accounted for by packaged foods. Plastic packaging of foods is not only ubiquitous in developed economies, but increasingly commonplace in the developing world, where plastic packaging is instrumental in decreasing the proportion of the food supply lost to spoilage. This new handbook is a combination of new material and updated chapters, chosen by Dr. Sina Ebnesajjad, from recently published books on this subject. Plastic Films in Food Packaging offers a practical handbook for engineers, scientists and managers working in the food packaging industry, providing a tailor-made package of science and engineering fundamentals, best practice techniques and guidance on new and emerging technologies. By covering materials, design, packaging processes, machinery and waste management together in one book, the authors enable the reader to take a lifecycle approach to food packaging. The Handbook addresses questions related to film grades, types of packages for different types of foods, packaging technologies, machinery and waste management. Additionally the book provides a review of new and emerging technologies. Two chapters cover the development of barrier films for food packaging and the regulatory and safety aspects of food packaging. - Essential information and practical guidance for engineers and scientists working at all stages of the food packaging lifecycle: from design through manufacture to recycling - Includes key published material on plastic films in food packaging, updated specifically for this Handbook, and new material on the regulatory framework and safety aspects - Coverage of materials and applications together in one handbook enables engineers and scientists to make informed design and manufacturing decisions

Download or read book Packaging Materials and Processing for Food Pharmaceuticals and Cosmetics written by Kata Galic and published by John Wiley & Sons. This book was released on 2021-04-27 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides valuable information on a range of food packaging topics. It serves as a source for students, professionals and packaging engineers who need to know more about the characteristics, applications and consequences of different packaging materials in food-packaging interactions. This book is divided into 13 chapters and focuses on the agro-food, cosmetics and pharmaceutical sectors. The first four chapters cover traditional packaging materials: wood, paper and cardboard, glass and metal. The next two deal, respectively, with plastics and laminates. Biobased materials are then covered, followed by a presentation of active and smart packaging. Some chapters are also dedicated to providing information on caps and closures as well as auxiliary materials. Different food packaging methods are presented, followed by an investigation into the design and labelling of packaging. The book ends with a chapter presenting information on how the choice of packaging material is dependent on the characteristics of the food products to be packaged.