Download or read book Titanium Dioxide TiO2 and Its Applications written by Francesco Parrino and published by Elsevier. This book was released on 2020-11-29 with total page 735 pages. Available in PDF, EPUB and Kindle. Book excerpt: Scientific interest in TiO2-based materials has exponentially grown in the last few decades. Titanium Dioxide (TiO2) and Its Applications introduces the main physicochemical properties of TiO2 which are the basis of its applications in various fields. While the basic principles of the TiO2 properties have been the subject of various previous publications, this book is mainly devoted to TiO2 applications. The book includes contributions written by experts from a wide range of disciplines in order to address titanium dioxide's utilization in energy, consumer, materials, devices, and catalytic applications. The various applications identified include: photocatalysis, catalysis, optics, electronics, energy storage and production, ceramics, pigments, cosmetics, sensors, and heat transfer. Titanium Dioxide (TiO2) and Its Applications is suitable for a wide readership in the disciplines of materials science, chemistry, and engineering in both academia and industry. - Includes a wide range of current and emerging applications of titanium dioxide in the fields of energy, consumer applications, materials, and devices - Provides a brief overview of titanium dioxide and its properties, as well as techniques to design, deposit, and study the material - Discusses the relevant properties, preparation methods, and other apposite considerations in each application-focused chapter

Download or read book Defects at Oxide Surfaces written by Jacques Jupille and published by Springer. This book was released on 2015-02-09 with total page 472 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the basics and characterization of defects at oxide surfaces. It provides a state-of-the-art review of the field, containing information to the various types of surface defects, describes analytical methods to study defects, their chemical activity and the catalytic reactivity of oxides. Numerical simulations of defective structures complete the picture developed. Defects on planar surfaces form the focus of much of the book, although the investigation of powder samples also form an important part. The experimental study of planar surfaces opens the possibility of applying the large armoury of techniques that have been developed over the last half-century to study surfaces in ultra-high vacuum. This enables the acquisition of atomic level data under well-controlled conditions, providing a stringent test of theoretical methods. The latter can then be more reliably applied to systems such as nanoparticles for which accurate methods of characterization of structure and electronic properties have yet to be developed. The book gives guidance to tailor oxide surfaces by controlling the nature and concentration of defects. The importance of defects in the physics and chemistry of metal oxide surfaces is presented in this book together with the prominent role of oxides in common life. The book contains contributions from leaders in the field. It serves as a reference for experts and beginners in the field.

Download or read book Tuning electronic properties of transition metal oxides at nanoscale by means of redox processes written by Karol Cieslik and published by Karol Cieslik. This book was released on with total page 134 pages. Available in PDF, EPUB and Kindle. Book excerpt: The climate crisis that we are facing has galvanized the scientific and engineering communities and has led to the rapid development of new, efficient, environmentally-friendly devices. One of the most promising classes of materials for such applications are transition metal oxides. This is due to the fact that by controlling the oxygen content in these crystals by means of reduction and oxidation, the material properties can be tuned in a wide range of values. Thus, the transition metal oxides, such as the model crystals, titanium dioxide (TiO2) and strontium titanate (SrTiO3), find use in so many different fields, from photocatalysis, to energy storage (solid oxide fuel cells), information technology (memristors) and even healthcare (antibacterial films). This PhD thesis is an investigation into the effect of reduction and oxidation on the electronic properties of transition metal oxides. These processes were studied at nanoscale using a multitude of techniques to provide a thorough characterization of the changes that occur in the studied systems, i.e. TiO2 and SrTiO3. Moreover, the experiments were performed in both ultra high vacuum (UHV) conditions, as well as in oxygen, and even in atmospheric air, in order to comprehensively describe the changes in properties and to bring the results closer to applications. The goal of the dissertation was to study the evolution of the electronic properties, i.e. the work function and conductivity, due to redox processes, and to add to the general understanding of these processes. The experiments revealed that the electronic properties may be tuned. In case of using reduction by means of annealing in UHV, ion sputtering, and repeated ion sputtering and annealing, and for oxidation by exposure to oxygen or air at room temperature, and annealing in oxygen. Using this range of methods, the conductivity of TiO2 can be changed from semiconductive-like to metallic-like. Furthermore, the work function of the transition metal oxides can be tuned in a wide range, from 3.4 eV to 5.0 eV for TiO2, and from 2.9 eV to 4.5 eV for SrTiO3. This is associated with changes in surface and subsurface composition, crystallography, morphology and even with the growth of new oxide phases. The key findings in the field of surface science were the description of the changes in electronic properties due to repeated sputtering and annealing, and the presence of oxygen getter substances. These results are important, because they touch upon the very basis of every experiment in the field, i.e. the preparation of crystals. This work can be used to foster greater reproducibility of experiments, as well to provide new means of designing experiments. Another object of the study was the technologically interesting system of conductive nanowires on semiconductive SrTiO3 substrate. It was shown that the nanostructures are composed of a TiO core covered with a layer of Ti3O5. The evolution of the system, starting from atomically flat strontium titanate, through nanowire-covered substrate to a crystal with a layer of porous titanium suboxides was described. The effect of annealing in oxygen on wire-covered surface was been investigated.

Download or read book On Solar Hydrogen and Nanotechnology written by Lionel Vayssieres and published by John Wiley & Sons. This book was released on 2010-01-26 with total page 706 pages. Available in PDF, EPUB and Kindle. Book excerpt: More energy from the sun strikes Earth in an hour than is consumed by humans in an entire year. Efficiently harnessing solar power for sustainable generation of hydrogen requires low-cost, purpose-built, functional materials combined with inexpensive large-scale manufacturing methods. These issues are comprehensively addressed in On Solar Hydrogen & Nanotechnology – an authoritative, interdisciplinary source of fundamental and applied knowledge in all areas related to solar hydrogen. Written by leading experts, the book emphasizes state-of-the-art materials and characterization techniques as well as the impact of nanotechnology on this cutting edge field. Addresses the current status and prospects of solar hydrogen, including major achievements, performance benchmarks, technological limitations, and crucial remaining challenges Covers the latest advances in fundamental understanding and development in photocatalytic reactions, semiconductor nanostructures and heterostructures, quantum confinement effects, device fabrication, modeling, simulation, and characterization techniques as they pertain to solar generation of hydrogen Assesses and establishes the present and future role of solar hydrogen in the hydrogen economy Contains numerous graphics to illustrate concepts, techniques, and research results On Solar Hydrogen & Nanotechnology is an essential reference for materials scientists, physical and inorganic chemists, electrochemists, physicists, and engineers carrying out research on solar energy, photocatalysis, or semiconducting nanomaterials, both in academia and industry. It is also an invaluable resource for graduate students and postdoctoral researchers as well as business professionals and consultants with an interest in renewable energy.

Download or read book Specimen Handling Preparation and Treatments in Surface Characterization written by Alvin W. Czanderna and published by Springer Science & Business Media. This book was released on 1998 with total page 316 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is intended for professionals, researchers, technicians and students who are newcomers to the field as well as those with experience. It will be an important resource in the following fields: surface science, electronic materials and processes, thin film deposition, surface compositional analysis and related topical areas such as corrosion, oxidation, reduction, adsorption, desorption, adhesion, epitaxial growth and contamination. The presentation uses a tutorial and pedagogical approach.

Download or read book The Surface Science of Metal Oxides written by and published by Royal Society of Chemistry. This book was released on 2000 with total page 498 pages. Available in PDF, EPUB and Kindle. Book excerpt: The surface science of metal oxides is studied using a variety of experimental and theoretical techniques, allowing the geometry, electronic structure, dynamics and the behaviour of the metal oxide-metal interface to be explored. Faraday Discussions documents a long-established series of Faraday Discussion meetings which provide a unique international forum for the exchange of views and newly acquired results in developing areas of physical chemistry, biophysical chemistry and chemical physics. The papers presented are published in the Faraday Discussion volume together with a record of the discussion contributions made at the meeting. Faraday Discussions therefore provide an important record of current international knowledge and views in the field concerned.

Download or read book Visible Light Active Photocatalysis written by Srabanti Ghosh and published by John Wiley & Sons. This book was released on 2018-06-11 with total page 624 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive and timely overview of this important and hot topic, with special emphasis placed on environmental applications and the potential for solar light harvesting. Following introductory chapters on environmental photocatalysis, water splitting, and applications in synthetic chemistry, further chapters focus on the synthesis and design of photocatalysts, solar energy conversion, and such environmental aspects as the removal of water pollutants, photocatalytic conversion of CO2. Besides metal oxide-based photocatalysts, the authors cover other relevant material classes including carbon-based nanomaterials and novel hybrid materials. Chapters on mechanistic aspects, computational modeling of photocatalysis and Challenges and perspectives of solar reactor design for industrial applications complete this unique survey of the subject. With its in-depth discussions ranging from a comprehensive understanding to the engineering of materials and applied devices, this is an invaluable resource for a range of disciplines.

Download or read book Dissertation Abstracts International written by and published by . This book was released on 2001 with total page 818 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Chemical Abstracts written by and published by . This book was released on 2002 with total page 2566 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Strong Metal support Interactions written by R. T. K. Baker and published by . This book was released on 1986 with total page 258 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Graduate Programs in Physics Astronomy and Related Fields written by American Institute of Physics and published by . This book was released on 2001 with total page 918 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Laser Desorption Ionization Mass Spectrometry Based on Nanophotonic Structure From Material Design to Mechanistic Understanding written by Moon-Ju Kim and published by Springer Nature. This book was released on 2023-11-11 with total page 107 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents innovative laser desorption ionization (LDI)-active nanophotonic structures for addressing the challenges that matrix-assisted laser desorption ionization mass spectrometry (MALDI-MS) is currently facing and for enhancing LDI efficiency. It presents a variety of cutting-edge nanophotonic structures to satisfy the mass-analytical needs of sensitivity, reproducibility, and quantification. As opposed to the commercialized, conventional organic matrix used in MALDI-MS, these nanostructures are validated to be highly effective in detecting small metabolites and drugs, highlighting their considerable potential in the mass spectrometry field. It also systematically elucidates fundamental LDI processes in terms of the photo-thermal, electronic, and structural characteristics of nanophotonic structures, offering mechanistic knowledge of LDI-MS. Even though LDI-MS performance is heavily influenced by a number of nanostructure parameters, relatively little is known about the LDI processes associated with those characteristics. An in-depth understanding of nanostructure characteristics and LDI mechanisms thus paves the way for more effective, rational design and development of nanostructures with improved LDI capabilities. Further, with a focus on multiple cascades in nanostructure functions in response to laser pulse stimuli, this book provides detailed, step-by-step procedures to design and construct a nanophotonic, LDI-active platform, which may serve as a roadmap for graduate students in the field of mass spectrometry. Readers, including graduate students, researchers, and experts working in the related areas of mass spectrometry, nanophotonics, and material science and material engineering, will find a wealth of useful information in this book.

Download or read book Encyclopedia of Interfacial Chemistry written by and published by Elsevier. This book was released on 2018-03-29 with total page 5276 pages. Available in PDF, EPUB and Kindle. Book excerpt: Encyclopedia of Interfacial Chemistry: Surface Science and Electrochemistry, Seven Volume Set summarizes current, fundamental knowledge of interfacial chemistry, bringing readers the latest developments in the field. As the chemical and physical properties and processes at solid and liquid interfaces are the scientific basis of so many technologies which enhance our lives and create new opportunities, its important to highlight how these technologies enable the design and optimization of functional materials for heterogeneous and electro-catalysts in food production, pollution control, energy conversion and storage, medical applications requiring biocompatibility, drug delivery, and more. This book provides an interdisciplinary view that lies at the intersection of these fields. Presents fundamental knowledge of interfacial chemistry, surface science and electrochemistry and provides cutting-edge research from academics and practitioners across various fields and global regions

Download or read book Classical And Quantum Dynamics In Condensed Phase Simulations Proceedings Of The International School Of Physics written by Bruce J Berne and published by World Scientific. This book was released on 1998-06-17 with total page 881 pages. Available in PDF, EPUB and Kindle. Book excerpt: The school held at Villa Marigola, Lerici, Italy, in July 1997 was very much an educational experiment aimed not just at teaching a new generation of students the latest developments in computer simulation methods and theory, but also at bringing together researchers from the condensed matter computer simulation community, the biophysical chemistry community and the quantum dynamics community to confront the shared problem: the development of methods to treat the dynamics of quantum condensed phase systems.This volume collects the lectures delivered there. Due to the focus of the school, the contributions divide along natural lines into two broad groups: (1) the most sophisticated forms of the art of computer simulation, including biased phase space sampling schemes, methods which address the multiplicity of time scales in condensed phase problems, and static equilibrium methods for treating quantum systems; (2) the contributions on quantum dynamics, including methods for mixing quantum and classical dynamics in condensed phase simulations and methods capable of treating all degrees of freedom quantum-mechanically.

Download or read book Photocatalytic Hydrogen Evolution written by Misook Kang and published by MDPI. This book was released on 2020-06-17 with total page 136 pages. Available in PDF, EPUB and Kindle. Book excerpt: Energy crises and global warming pose serious challenges to researchers in their attempt to develop a sustainable society for the future. Solar energy conversion is a remarkable, clean, and sustainable way to nullify the effects of fossil fuels. The findings of photocatalytic hydrogen production (PCHP) by Fujishima and Honda propose that “water will be the coal for the future”. Hydrogen is a carbon-free clean fuel with a high specific energy of combustion. Titanium oxide (TiO2), graphitic-carbon nitride (g-C3N4) and cadmium sulfide (CdS) are three pillars of water splitting photocatalysts owing to their superior electronic and optical properties. Tremendous research efforts have been made in recent years to fabricate visible or solar-light, active photocatalysts. The significant features of various oxide, sulfide, and carbon based photocatalysts for cost-effective hydrogen production are presented in this Special Issue. The insights of sacrificial agents on the hydrogen production efficiency of catalysts are also presented in this issue.

Download or read book American Doctoral Dissertations written by and published by . This book was released on 2000 with total page 816 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Metal Induced Crystallization written by Zumin Wang and published by CRC Press. This book was released on 2015-01-28 with total page 317 pages. Available in PDF, EPUB and Kindle. Book excerpt: Crystalline semiconductors in the form of thin films are crucial materials for many modern, advanced technologies in fields such as microelectronics, optoelectronics, display technology, and photovoltaic technology. Crystalline semiconductors can be produced at surprisingly low temperatures (as low as 120C) by crystallization of amorphous semicon