Download or read book Oxy Fuel Combustion for Power Generation and Carbon Dioxide CO2 Capture written by L Zheng and published by Elsevier. This book was released on 2011-02-26 with total page 397 pages. Available in PDF, EPUB and Kindle. Book excerpt: Oxy-fuel combustion is currently considered to be one of the major technologies for carbon dioxide (CO2) capture in power plants. The advantages of using oxygen (O2) instead of air for combustion include a CO2-enriched flue gas that is ready for sequestration following purification and low NOx emissions. This simple and elegant technology has attracted considerable attention since the late 1990s, rapidly developing from pilot-scale testing to industrial demonstration. Challenges remain, as O2 supply and CO2 capture create significant energy penalties that must be reduced through overall system optimisation and the development of new processes.Oxy-fuel combustion for power generation and carbon dioxide (CO2) capture comprehensively reviews the fundamental principles and development of oxy-fuel combustion in fossil-fuel fired utility boilers. Following a foreword by Professor János M. Beér, the book opens with an overview of oxy-fuel combustion technology and its role in a carbon-constrained environment. Part one introduces oxy-fuel combustion further, with a chapter comparing the economics of oxy-fuel vs. post-/pre-combustion CO2 capture, followed by chapters on plant operation, industrial scale demonstrations, and circulating fluidized bed combustion. Part two critically reviews oxy-fuel combustion fundamentals, such as ignition and flame stability, burner design, emissions and heat transfer characteristics, concluding with chapters on O2 production and CO2 compression and purification technologies. Finally, part three explores advanced concepts and developments, such as near-zero flue gas recycle and high-pressure systems, as well as chemical looping combustion and utilisation of gaseous fuel.With its distinguished editor and internationally renowned contributors, Oxy-fuel combustion for power generation and carbon dioxide (CO2) capture provides a rich resource for power plant designers, operators, and engineers, as well as academics and researchers in the field. Comprehensively reviews the fundamental principles and development of oxy-fuel combustion in fossil-fuel fired utility boilers Provides an overview of oxy-fuel combustion technology and its role in a carbon-constrained environment Introduces oxy-fuel combustion comparing the economics of oxy-fuel vs. post-/pre-combustion CO2 capture
Download or read book Carbon Dioxide Emission Management in Power Generation written by Prof. Lars O. Nord and published by John Wiley & Sons. This book was released on 2020-04-27 with total page 344 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides an engaging and clearly structured source of information on the capture and storage of CO2 Designed to bridge the gap between the many disciplines involved in carbon dioxide emission management, this book provides a comprehensive yet easy-to-understand introduction to the subject of CO2 capture. Fit for graduate students, practicing process engineers, and others interested in the subject, it offers a clear understanding and overview of thermal power plants in particular and of carbon dioxide capture and storage (CCS) in general. Carbon Dioxide Emission Management in Power Generation starts with a discussion of the greenhouse effect, climate change, and CO2 emissions as the rationale for the concept of CCS. It then looks at the long-term storage of CO2. A chapter covering different fossil fuels, their usage, and properties comes next, followed by sections on: CO2 generation, usage and properties; power plant technologies; theory of gas separation; power plant efficiency calculations; and classification of CO2 capture methods. Other chapters examine: CO2 capture by gas absorption and other gas separation methods; removing carbon from the fuel; pre- and post-combustion CO2 capture in power cycles; and oxy-combustion CO2 capture in power cycles. -Discusses both CO2 capture technologies as well as power generation technologies -Bridges the gap between many different disciplines?from scientists, geologists and engineers, to economists -One of the few books that covers all the different sciences involved in the capture and storage of CO2 -Introduces the topic and provides useful information to the academic as well as professional reader Carbon Dioxide Emission Management in Power Generation is an excellent book for students who are interested in CO2 capture and storage, as well as for chemists in industry, environmental chemists, chemical engineers, geochemists, and geologists.
Download or read book Thermal Power Plants written by Mohammad Rasul and published by BoD – Books on Demand. This book was released on 2013-04-17 with total page 190 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thermal power plants are one of the most important process industries for engineering professionals. Over the past decades, the power sector is facing a number of critical issues; however, the most fundamental challenge is meeting the growing power demand in sustainable and efficient ways. Practicing power plant engineers not only look after operation and maintenance of the plant, but, also look after range of activities including research and development, starting from power generation to environmental aspects of power plants. The book Thermal Power Plants - Advanced Applications introduces analysis of plant performance, energy efficiency, combustion, heat transfer, renewable power generation, catalytic reduction of dissolved oxygen and environmental aspects of combustion residues. This book addresses issues related to both coal fired and steam power plants. The book is suitable for both undergraduate and research higher degree students, and of course for practicing power plant engineers.
Download or read book Biomass Energy with Carbon Capture and Storage BECCS written by Clair Gough and published by John Wiley & Sons. This book was released on 2018-09-24 with total page 338 pages. Available in PDF, EPUB and Kindle. Book excerpt: An essential resource for understanding the potential role for biomass energy with carbon capture and storage in addressing climate change Biomass Energy with Carbon Capture and Storage (BECCS) offers a comprehensive review of the characteristics of BECCS technologies in relation to its various applications. The authors — a team of expert professionals — bring together in one volume the technical, scientific, social, economic and governance issues relating to the potential deployment of BECCS as a key approach to climate change mitigation. The text contains information on the current and future opportunities and constraints for biomass energy, explores the technologies involved in BECCS systems and the performance characteristics of a variety of technical systems. In addition, the text includes an examination of the role of BECCS in climate change mitigation, carbon accounting across the supply chain and policy frameworks. The authors also offer a review of the social and ethical aspects as well as the costs and economics of BECCS. This important text: Reveals the role BECCS could play in the transition to a low-carbon economy Discusses the wide variety of technical and non-technical constraints of BECCS Presents the basics of biomass energy systems Reviews the technical and engineering issues pertinent to BECCS Explores the societal implications of BECCS systems Written for academics and research professionals, Biomass Energy with Carbon Capture and Storage (BECCS) brings together in one volume the issues surrounding BECCS in an accessible and authoritative manner.
Download or read book Greenhouse Gases written by Andrew Manning and published by BoD – Books on Demand. This book was released on 2016-09-21 with total page 92 pages. Available in PDF, EPUB and Kindle. Book excerpt: Greenhouse Gases - Selected Case Studies, is a book which covers a range of topics. The long term effective management of the natural environment, requires a detailed understanding of greenhouse gases. This has both environmental and economic implications, especially where there is any anthropogenic involvement. Numerical models are often the tool and framework used for predicting the effects, both in the long-term and short-term, of greenhouse gases. However, the relevant atmospheric processes can vary quite considerably depending upon the spatial and temporal scales under consideration. For this reason for the past few decades, scientists, engineers, meteorologists and mathematicians have all been continuing to conduct research into the many aspects which influence greenhouse gases. These issues range from: industrial science, agricultural research, carbon dioxide and other emissions. This book reports the findings from recent research in greenhouse gases, primarily in the the form of case studies, particularly from an interdisciplinary perspective. The research was carried out by researchers who specialise in areas such as: energy production, emissions from livestock, chemical industry, and metallurgical process technology.
Download or read book Negative Emissions Technologies and Reliable Sequestration written by National Academies of Sciences, Engineering, and Medicine and published by National Academies Press. This book was released on 2019-04-08 with total page 511 pages. Available in PDF, EPUB and Kindle. Book excerpt: To achieve goals for climate and economic growth, "negative emissions technologies" (NETs) that remove and sequester carbon dioxide from the air will need to play a significant role in mitigating climate change. Unlike carbon capture and storage technologies that remove carbon dioxide emissions directly from large point sources such as coal power plants, NETs remove carbon dioxide directly from the atmosphere or enhance natural carbon sinks. Storing the carbon dioxide from NETs has the same impact on the atmosphere and climate as simultaneously preventing an equal amount of carbon dioxide from being emitted. Recent analyses found that deploying NETs may be less expensive and less disruptive than reducing some emissions, such as a substantial portion of agricultural and land-use emissions and some transportation emissions. In 2015, the National Academies published Climate Intervention: Carbon Dioxide Removal and Reliable Sequestration, which described and initially assessed NETs and sequestration technologies. This report acknowledged the relative paucity of research on NETs and recommended development of a research agenda that covers all aspects of NETs from fundamental science to full-scale deployment. To address this need, Negative Emissions Technologies and Reliable Sequestration: A Research Agenda assesses the benefits, risks, and "sustainable scale potential" for NETs and sequestration. This report also defines the essential components of a research and development program, including its estimated costs and potential impact.
Download or read book Fundamentals and Applications of Supercritical Carbon Dioxide SCO2 Based Power Cycles written by Klaus Brun and published by Woodhead Publishing. This book was released on 2017-01-09 with total page 462 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fundamentals and Applications of Supercritical Carbon Dioxide (SCO2) Based Power Cycles aims to provide engineers and researchers with an authoritative overview of research and technology in this area. Part One introduces the technology and reviews the properties of SCO2 relevant to power cycles. Other sections of the book address components for SCO2 power cycles, such as turbomachinery expanders, compressors, recuperators, and design challenges, such as the need for high-temperature materials. Chapters on key applications, including waste heat, nuclear power, fossil energy, geothermal and concentrated solar power are also included. The final section addresses major international research programs. Readers will learn about the attractive features of SC02 power cycles, which include a lower capital cost potential than the traditional cycle, and the compounding performance benefits from a more efficient thermodynamic cycle on balance of plant requirements, fuel use, and emissions. Represents the first book to focus exclusively on SC02 power cycles Contains detailed coverage of cycle fundamentals, key components, and design challenges Addresses the wide range of applications of SC02 power cycles, from more efficient electricity generation, to ship propulsion
Download or read book Advances in Carbon Capture written by Mohammad Reza Rahimpour and published by Woodhead Publishing. This book was released on 2020-08-04 with total page 574 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Carbon Capture reviews major implementations of CO2 capture, including absorption, adsorption, permeation and biological techniques. For each approach, key benefits and drawbacks of separation methods and technologies, perspectives on CO2 reuse and conversion, and pathways for future CO2 capture research are explored in depth. The work presents a comprehensive comparison of capture technologies. In addition, the alternatives for CO2 separation from various feeds are investigated based on process economics, flexibility, industrial aspects, purification level and environmental viewpoints. Explores key CO2 separation and compare technologies in terms of provable advantages and limitations Analyzes all critical CO2 capture methods in tandem with related technologies Introduces a panorama of various applications of CO2 capture
Download or read book Carbon Dioxide Emission Management in Power Generation written by Olav Bolland and published by Wiley-VCH. This book was released on 2020-04-03 with total page 1050 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides an engaging and clearly structured source of information on the capture and storage of CO2 Designed to bridge the gap between the many disciplines involved in carbon dioxide emission management, this book provides a comprehensive yet easy-to-understand introduction to the subject of CO2 capture. Fit for graduate students, practicing process engineers, and others interested in the subject, it offers a clear understanding and overview of thermal power plants in particular and of carbon dioxide capture and storage (CCS) in general. Carbon Dioxide Emission Management in Power Generation starts with a discussion of the greenhouse effect, climate change, and CO2 emissions as the rationale for the concept of CCS. It then looks at the long-term storage of CO2. A chapter covering different fossil fuels, their usage, and properties comes next, followed by sections on: CO2 generation, usage and properties; power plant technologies; theory of gas separation; power plant efficiency calculations; and classification of CO2 capture methods. Other chapters examine: CO2 capture by gas absorption and other gas separation methods; removing carbon from the fuel; pre- and post-combustion CO2 capture in power cycles; and oxy-combustion CO2 capture in power cycles. -Discusses both CO2 capture technologies as well as power generation technologies -Bridges the gap between many different disciplines?from scientists, geologists and engineers, to economists -One of the few books that covers all the different sciences involved in the capture and storage of CO2 -Introduces the topic and provides useful information to the academic as well as professional reader Carbon Dioxide Emission Management in Power Generation is an excellent book for students who are interested in CO2 capture and storage, as well as for chemists in industry, environmental chemists, chemical engineers, geochemists, and geologists.
Download or read book Recent Technologies in Capture of CO2 written by Rosa-Hilda Chavez and published by Bentham Science Publishers. This book was released on 2014-09-30 with total page 306 pages. Available in PDF, EPUB and Kindle. Book excerpt: “Recent Technologies in the capture of CO2” provides a comprehensive summary on the latest technologies available to minimize the emission of CO2 from large point sources like fossil-fuel power plants or industrial facilities. This ebook also covers various techniques that could be developed to reduce the amount of CO2 released into the atmosphere. The contents of this book include chapters on oxy-fuel combustion in fluidized beds, gas separation membrane used in post-combustion capture, minimizing energy consumption in CO2 capture processes through process integration, characterization and application of structured packing for CO2 capture, calcium looping technology for CO2 capture and many more. Recent Technologies in capture of CO2 is a valuable resource for graduate students, process engineers and administrative staff looking for real-case analysis of pilot plants. This eBook brings together the research results and professional experiences of the most renowned work groups in the CO2 capture field.
Download or read book Developments and Innovation in Carbon Dioxide CO2 Capture and Storage Technology written by M. Mercedes Maroto-Valer and published by Elsevier. This book was released on 2010-06-21 with total page 561 pages. Available in PDF, EPUB and Kindle. Book excerpt: Carbon dioxide (CO2) capture and storage (CCS) is the one advanced technology that conventional power generation cannot do without. CCS technology reduces the carbon footprint of power plants by capturing and storing the CO2 emissions from burning fossil-fuels and biomass. This volume provides a comprehensive reference on the state of the art research, development and demonstration of carbon capture technology in the power sector and in industry. It critically reviews the range of post- and pre-combustion capture and combustion-based capture processes and technology applicable to fossil-fuel power plants, as well as applications of CCS in other high carbon footprint industries. Foreword written by Lord Oxburgh, Climate Science Peer Reviews the economics, regulation and planning of carbon capture and storage for power plants and industry Explores developments in combustion processes and technologies for CO2 capture in power plants
Download or read book Oxygen Enhanced Combustion written by Charles E. Baukal Jr. and published by CRC Press. This book was released on 2013-03-15 with total page 779 pages. Available in PDF, EPUB and Kindle. Book excerpt: Combustion technology has traditionally been dominated by air/fuel combustion. However, two developments have increased the significance of oxygen-enhanced combustion-new technologies that produce oxygen less expensively and the increased importance of environmental regulations. Advantages of oxygen-enhanced combustion include less pollutant emissi
Download or read book Greenhouse Gas Control Technologies written by and published by . This book was released on 2005 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Following the successful publication of the proceedings of 6th Green House Gas Control Technology conference (GHGT-6), Elsevier is proud to publish the proceedings from the 7th conference, held in Vancouver in September 2004. The Greenhouse Gas Control Technologies conference series has established itself as the foremost conference bringing together the international energy community, providing a forum for the discussion of the latest advances in the field of greenhouse gas control technologies.
Download or read book Energy Efficient Solvents for CO2 Capture by Gas Liquid Absorption written by Wojciech M. Budzianowski and published by Springer. This book was released on 2016-12-01 with total page 277 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book reviews and characterises promising single-compound solvents, solvent blends and advanced solvent systems suitable for CO2 capture applications using gas-liquid absorption. Focusing on energy efficient solvents with minimal adverse environmental impact, the contributions included analyse the major technological advantages, as well as research and development challenges of promising solvents and solvent systems in various sustainable CO2 capture applications. It provides a valuable source of information for undergraduate and postgraduate students, as well as for chemical engineers and energy specialists.
Download or read book Process Intensification written by David Reay and published by Butterworth-Heinemann. This book was released on 2013-06-05 with total page 624 pages. Available in PDF, EPUB and Kindle. Book excerpt: Process Intensification: Engineering for Efficiency, Sustainability and Flexibility is the first book to provide a practical working guide to understanding process intensification (PI) and developing successful PI solutions and applications in chemical process, civil, environmental, energy, pharmaceutical, biological, and biochemical systems. Process intensification is a chemical and process design approach that leads to substantially smaller, cleaner, safer, and more energy efficient process technology. It improves process flexibility, product quality, speed to market and inherent safety, with a reduced environmental footprint. This book represents a valuable resource for engineers working with leading-edge process technologies, and those involved research and development of chemical, process, environmental, pharmaceutical, and bioscience systems. No other reference covers both the technology and application of PI, addressing fundamentals, industry applications, and including a development and implementation guide Covers hot and high growth topics, including emission prevention, sustainable design, and pinch analysis World-class authors: Colin Ramshaw pioneered PI at ICI and is widely credited as the father of the technology
Download or read book Carbon Capture and Storage Including Coal fired Power Plants written by Todd P. Carington and published by . This book was released on 2010 with total page 206 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nationally-recognised studies and our contacts with a diverse group of industry representatives, non-governmental organisations, and academic researchers show that key barriers to CCS deployment include (1) underdeveloped and costly CO2 capture technology and (2) regulatory and legal uncertainties over CO2 capture, injection, and storage. Among the key technological barriers are a lack of experience in capturing significant amounts of CO2 from power plants and the significant cost of capturing CO2, particularly from existing coal-fired power plants, which are the single largest source of CO2 emissions in the United States. Compounding these technological issues are regulatory and legal uncertainties, including uncertainty regarding liability for CO2 leakage and ownership of CO2 once injected. According to the IPCC, the National Academy of Sciences, and other knowledgeable authorities, another barrier is the absence of a national strategy to control CO2 emissions (emissions trading plan, CO2 emissions tax, or other mandatory control of CO2 emissions), without which the electric utility industry has little incentive to capture and store its CO2 emissions. Moreover, according to key agency officials, the absence of a national strategy has also deterred their agencies from addressing other important practical issues, such as resolving how stored CO2 would be treated in a future CO2 emissions trading plan.
Download or read book Oxy Fuel Combustion written by Masayuki Taniguchi and published by Nova Science Publishers. This book was released on 2014-05-14 with total page 63 pages. Available in PDF, EPUB and Kindle. Book excerpt: It has been predicted that by 2030 the world's population will be about 1.6 times that of 2004. The energy consumption will increase by 60% by 2030. This new book discusses the Wind turbine generation and photovoltaic power generation which are expected to increase ten-fold by 2030, but their combined percentage of the generation will only total 7%. The expectation for nuclear power generation is large, but under present conditions, the amount of natural uranium resources will have a share for only 80 years. Development of the fast breeder reactor is being pushed forward, but it is not expected to be commercial before about 2050. Therefore, it will continue to be necessary to depend on fossil fuel. Carbon dioxide capture and storage (CCS) techniques for thermal power plants will also surely become important.
