Download or read book Oxy Fuel Combustion for Power Generation and Carbon Dioxide CO2 Capture written by L Zheng and published by Elsevier. This book was released on 2011-02-26 with total page 397 pages. Available in PDF, EPUB and Kindle. Book excerpt: Oxy-fuel combustion is currently considered to be one of the major technologies for carbon dioxide (CO2) capture in power plants. The advantages of using oxygen (O2) instead of air for combustion include a CO2-enriched flue gas that is ready for sequestration following purification and low NOx emissions. This simple and elegant technology has attracted considerable attention since the late 1990s, rapidly developing from pilot-scale testing to industrial demonstration. Challenges remain, as O2 supply and CO2 capture create significant energy penalties that must be reduced through overall system optimisation and the development of new processes.Oxy-fuel combustion for power generation and carbon dioxide (CO2) capture comprehensively reviews the fundamental principles and development of oxy-fuel combustion in fossil-fuel fired utility boilers. Following a foreword by Professor János M. Beér, the book opens with an overview of oxy-fuel combustion technology and its role in a carbon-constrained environment. Part one introduces oxy-fuel combustion further, with a chapter comparing the economics of oxy-fuel vs. post-/pre-combustion CO2 capture, followed by chapters on plant operation, industrial scale demonstrations, and circulating fluidized bed combustion. Part two critically reviews oxy-fuel combustion fundamentals, such as ignition and flame stability, burner design, emissions and heat transfer characteristics, concluding with chapters on O2 production and CO2 compression and purification technologies. Finally, part three explores advanced concepts and developments, such as near-zero flue gas recycle and high-pressure systems, as well as chemical looping combustion and utilisation of gaseous fuel.With its distinguished editor and internationally renowned contributors, Oxy-fuel combustion for power generation and carbon dioxide (CO2) capture provides a rich resource for power plant designers, operators, and engineers, as well as academics and researchers in the field. Comprehensively reviews the fundamental principles and development of oxy-fuel combustion in fossil-fuel fired utility boilers Provides an overview of oxy-fuel combustion technology and its role in a carbon-constrained environment Introduces oxy-fuel combustion comparing the economics of oxy-fuel vs. post-/pre-combustion CO2 capture
Download or read book Oxy fuel Combustion written by Chuguang Zheng and published by Academic Press. This book was released on 2017-09-14 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: Oxy-fuel Combustion: Fundamentals, Theory and Practice provides a comprehensive review of various aspects of oxy-fuel combustion technology, including its concept, fundamental theory, pilot practice, large-scale feasibility studies and related practical issues, such as the commissioning and operation of an oxy-fuel combustion plant. Oxy-fuel combustion, as the most practical large-scale carbon capture power generation technology, has attracted significant attention in the past two decades. As significant progress has been achieved in worldwide demonstration and the oxy-combustion concept confirmed by Schwartze Pump, CUIDEN, Callide, Ponferrada and Yingcheng projects in the past five years, this book provides a timely addition for discussion and study. Covers oxy-fuel combustion technology Includes concepts, fundamentals, pilots and large-scale feasibility studies Considers related practical issues, such as the commissioning and operation of an oxy-fuel combustion plant Focuses on theories and methods closely related to engineering practice
Download or read book Oxygen Enhanced Combustion written by Charles E. Baukal Jr. and published by CRC Press. This book was released on 2013-03-15 with total page 779 pages. Available in PDF, EPUB and Kindle. Book excerpt: Combustion technology has traditionally been dominated by air/fuel combustion. However, two developments have increased the significance of oxygen-enhanced combustion-new technologies that produce oxygen less expensively and the increased importance of environmental regulations. Advantages of oxygen-enhanced combustion include less pollutant emissi
Download or read book Thermal Power Plants written by Mohammad Rasul and published by BoD – Books on Demand. This book was released on 2013-04-17 with total page 190 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thermal power plants are one of the most important process industries for engineering professionals. Over the past decades, the power sector is facing a number of critical issues; however, the most fundamental challenge is meeting the growing power demand in sustainable and efficient ways. Practicing power plant engineers not only look after operation and maintenance of the plant, but, also look after range of activities including research and development, starting from power generation to environmental aspects of power plants. The book Thermal Power Plants - Advanced Applications introduces analysis of plant performance, energy efficiency, combustion, heat transfer, renewable power generation, catalytic reduction of dissolved oxygen and environmental aspects of combustion residues. This book addresses issues related to both coal fired and steam power plants. The book is suitable for both undergraduate and research higher degree students, and of course for practicing power plant engineers.
Download or read book Biomass Energy with Carbon Capture and Storage BECCS written by Clair Gough and published by John Wiley & Sons. This book was released on 2018-09-24 with total page 338 pages. Available in PDF, EPUB and Kindle. Book excerpt: An essential resource for understanding the potential role for biomass energy with carbon capture and storage in addressing climate change Biomass Energy with Carbon Capture and Storage (BECCS) offers a comprehensive review of the characteristics of BECCS technologies in relation to its various applications. The authors — a team of expert professionals — bring together in one volume the technical, scientific, social, economic and governance issues relating to the potential deployment of BECCS as a key approach to climate change mitigation. The text contains information on the current and future opportunities and constraints for biomass energy, explores the technologies involved in BECCS systems and the performance characteristics of a variety of technical systems. In addition, the text includes an examination of the role of BECCS in climate change mitigation, carbon accounting across the supply chain and policy frameworks. The authors also offer a review of the social and ethical aspects as well as the costs and economics of BECCS. This important text: Reveals the role BECCS could play in the transition to a low-carbon economy Discusses the wide variety of technical and non-technical constraints of BECCS Presents the basics of biomass energy systems Reviews the technical and engineering issues pertinent to BECCS Explores the societal implications of BECCS systems Written for academics and research professionals, Biomass Energy with Carbon Capture and Storage (BECCS) brings together in one volume the issues surrounding BECCS in an accessible and authoritative manner.
Download or read book Proceedings of the 20th International Conference on Fluidized Bed Combustion written by Guangxi Yue and published by Springer Science & Business Media. This book was released on 2010-07-28 with total page 1186 pages. Available in PDF, EPUB and Kindle. Book excerpt: The proceedings of the 20th International Conference on Fluidized Bed Combustion (FBC) collect 9 plenary lectures and 175 peer-reviewed technical papers presented in the conference held in Xi'an China in May 18-21,2009. The conference was the 20th conference in a series, covering the latest fundamental research results, as well as the application experience from pilot plants, demonstrations and industrial units regarding to the FBC science and technology. It was co-hosted by Tsinghua University, Southeast University, Zhejiang University, China Electricity Council and Chinese Machinery Industry Federation. A particular feature of the proceedings is the balance between the papers submitted by experts from industry and the papers submitted by academic researchers, aiming to bring academic knowledge to application as well as to define new areas for research. The authors of the proceedings are the most active researchers, technology developers, experienced and representative facility operators and manufacturers. They presented the latest research results, state-of-the-art development and projects, and the useful experience. The proceedings are divided into following sections: • CFB Boiler Technology, Operation and Design • Fundamental Research on Fluidization and Fluidized Combustion • C02 Capture and Chemical Looping • Gasification • Modeling and Simulation on FBC Technology • Environments and Pollutant Control • Sustainable Fuels The proceedings can be served as idea references for researchers, engineers, academia and graduate students, plant operators, boiler manufacturers, component suppliers, and technical managers who work on FBC fundamental research, technology development and industrial application.
Download or read book Oxyfuel Combustion for Clean Energy Applications written by Medhat A. Nemitallah and published by Springer. This book was released on 2019-02-11 with total page 378 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book aims to be the reference book in the area of oxyfuel combustion, covering the fundamentals, design considerations and current challenges in the field. Its first part provides an overview of the greenhouse gas emission problem and the current carbon capture and sequestration technologies. The second part introduces oxy-fuel combustion technologies with emphasis on system efficiency, combustion and emission characteristics, applications and related challenges. The third part focuses on the recent developments in ion transport membranes and their performance in both oxygen separation units and oxygen transport reactors (OTRs). The fourth part presents novel approaches for clean combustion in gas turbines and boilers. Computational modelling and optimization of combustion in gas turbine combustors and boiler furnaces are presented in the fifth part with some numerical results and detailed analyses.
Download or read book 81st Conference on Glass Problems written by S. K. Sundaram and published by John Wiley & Sons. This book was released on 2021-06-22 with total page 26 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 81st Conference on Glass Problems (GPC) was organized by the Kazuo Inamori School of Engineering, The New York State College of Ceramics, Alfred University, Alfred, NY 14802 and The Glass Manufacturing Industry Council (GMIC), Westerville, OH 43082. The Program Director was S. K. Sundaram, Inamori Professor of Materials Science and Engineering, Kazuo Inamori School of Engineering, The New York State College of Ceramics, Alfred University, Alfred, NY 14802. The Conference Director was Bob Lipetz, Executive Director, Glass Manufacturing Industry Council (GMIC), Westerville, OH 43082. The GPC Advisory Board (AB) included the Program Director, the Conference Director, and several industry representatives. The Board assembled the technical program. Donna Banks of the GMIC coordinated the events and provided support. Due to world-wide COVID-19 pandemic, the conference was a virtual event. It started with a full-day plenary session followed by technical sessions.
Download or read book Energy Storage written by Manuel Bailera and published by Springer Nature. This book was released on 2020-05-09 with total page 141 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a detailed analysis of Power-to-Gas, a promising energy storage technology. It discusses the main mechanisms involved, and presents two Power-to-Gas and carbon capture hybridizations. The book begins by providing an introduction to energy storage technologies. It then reviews a number of Power-to-Gas projects now in progress, highlighting the current barriers to commercializing the technology. Moreover, the book presents two novel Power-to-Gas hybridizations, which improve the technology’s applicability in terms of efficiency, utilization of resources and profitability. Given its scope, the book will be of interest to graduate students, researchers and practitioners in the fields of engineering and energy.
Download or read book 80th Conference on Glass Problems written by S. K. Sundaram and published by John Wiley & Sons. This book was released on 2021-01-27 with total page 192 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 80th Glass Problem Conference (GPC) was organized by the Kazuo Inamori School of Engineering, The New York State College of Ceramics, Alfred University, Alfred, NY 14802 and The Glass Manufacturing Industry Council (GMIC), Westerville, OH 43082. The Program Director was S. K. Sundaram, Inamori Professor of Materials Science and Engineering, Kazuo Inamori School of Engineering, The New York State College of Ceramics, Alfred University, Alfred, NY 14802. The Conference Director was Robert Weisenburger Lipetz, Executive Director, Glass Manufacturing Industry Council (GMIC), Westerville, OH 43082. The GPC Advisory Board (AB) included the Program Director, the Conference Director, and several industry representatives. The Board assembled the technical program. Donna Banks of the GMIC coordinated the events and provided support. The Conference started with a half-day plenary session followed by technical sessions. The themes and chairs of four technical sessions were as follows: Melting and Combustion Uyi Iyoha, Praxair, Inc., Peachtree City, GA, Jan Schep, Owens-Illinois, Inc., Perrysburg, OH, and Justin Wang, Guardian Industries, Auburn Hills, MI Batch, Environmental, and Modeling Phil Tucker, Johns Manville, Littleton, CO and Chris Tournour, Corning Inc., Corning, NY Refractories Larry McCloskey, Anchor Acquisition, LLC, Lancaster, OH and Eric Dirlam, Ardagh Group, Muncie, IN Sensors and Control Adam Polycn, Vitro Architectural Glass, Cheswick, PA and Glenn Neff, Glass Service USA, Inc., Stuart, FL
Download or read book Fundamentals of Combustion Engineering written by Achintya Mukhopadhyay and published by CRC Press. This book was released on 2019-02-22 with total page 201 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is an introductory text on fundamental aspects of combustion including thermodynamics, heat and mass transfer and chemical kinetics which are used to systematically derive the basic concepts of combustion. Apart from the fundamental aspects, many of the emerging topics in the field like microscale combustion, combustion dynamics, oxy-fuel combustion and combustion diagnostics are also covered in the book. This would help the beginners in the subject to get initiated to the state of the art topics. Key Features: Coverage of the essential aspects of combustion engineering suitable for both beginners and practicing professionals Topics like entropy generation, microscale combustion, combustion diagnostics, second law-based analysis exclusive to the title Balanced treatment of thermodynamics, transport phenomena and chemical kinetics Discussion on state of the art techniques in combustion diagnostics Illustrates combustion of gaseous, liquid and solid fuels along with emission of pollutants and greenhouse gases
Download or read book MILD Combustion Modelling Challenges Experimental Configurations and Diagnostic Tools written by Alessandro Parente and published by Frontiers Media SA. This book was released on 2021-11-26 with total page 160 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Enhancing Future Skills and Entrepreneurship written by Kuldip Singh Sangwan and published by Springer Nature. This book was released on 2020-07-27 with total page 281 pages. Available in PDF, EPUB and Kindle. Book excerpt: This open access book presents the proceedings of the 3rd Indo-German Conference on Sustainability in Engineering held at Birla Institute of Technology and Science, Pilani, India, on September 16–17, 2019. Intended to foster the synergies between research and education, the conference is one of the joint activities of the BITS Pilani and TU Braunschweig conducted under the auspices of Indo-German Center for Sustainable Manufacturing, established in 2009. The book is divided into three sections: engineering, education and entrepreneurship, covering a range of topics, such as renewable energy forecasting, design & simulation, Industry 4.0, and soft & intelligent sensors for energy efficiency. It also includes case studies on lean and green manufacturing, and life cycle analysis of ceramic products, as well as papers on teaching/learning methods based on the use of learning factories to improve students’problem-solving and personal skills. Moreover, the book discusses high-tech ideas to help the large number of unemployed engineering graduates looking for jobs become tech entrepreneurs. Given its broad scope, it will appeal to academics and industry professionals alike.
Download or read book Clean Coal Engineering Technology written by Bruce G. Miller and published by Elsevier. This book was released on 2010-11-15 with total page 696 pages. Available in PDF, EPUB and Kindle. Book excerpt: Concern over the effects of airborne pollution, green house gases, and the impact of global warming has become a worldwide issue that transcends international boundaries, politics, and social responsibility. The 2nd Edition of Coal Energy Systems: Clean Coal Technology describes a new generation of energy processes that sharply reduce air emissions and other pollutants from coal-burning power plants. Coal is the dirtiest of all fossil fuels. When burned, it produces emissions that contribute to global warming, create acid rain, and pollute water. With all of the interest and research surrounding nuclear energy, hydropower, and biofuels, many think that coal is finally on its way out. However, coal generates half of the electricity in the United States and throughout the world today. It will likely continue to do so as long as it's cheap and plentiful [Source: Energy Information Administration]. Coal provides stability in price and availability, will continue to be a major source of electricity generation, will be the major source of hydrogen for the coming hydrogen economy, and has the potential to become an important source of liquid fuels. Conservation and renewable/sustainable energy are important in the overall energy picture, but will play a lesser role in helping us satisfy our energy demands today. Dramatically updated to meet the needs of an ever changing energy market, Coal Energy Systems, 2nd Edition is a single source covering policy and the engineering involved in implementing that policy. The book addresses many coal-related subjects of interest ranging from the chemistry of coal and the future engineering anatomy of a coal fired plant to the cutting edge clean coal technologies being researched and utilized today. A 50% update over the first edition, this new book contains new chapters on processes such as CO2 capture and sequestration, Integrated Gasification Combined Cycle (IGCC) systems, Pulverized-Coal Power Plants and Carbon Emission Trading. Existing materials on worldwide coal distribution and quantities, technical and policy issues regarding the use of coal, technologies used and under development for utilizing coal to produce heat, electricity, and chemicals with low environmental impact, vision for utilizing coal well into the 21st century, and the security coal presents. Clean Liquids and Gaseous Fuels from Coal for Electric Power Integrated Gasification Combined Cycle (IGCC) systems Pulverized-Coal Power Plants Advanced Coal-Based Power Plants Fluidized-Bed Combustion Technology CO2 capture and sequestration
Download or read book Clean Coal and Sustainable Energy written by Junfu Lyu and published by Springer Nature. This book was released on 2021-09-29 with total page 1091 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers the proceedings of the 9th International Symposium on Coal Combustion, held in Qingdao, China in July 2019. It provides the latest research results on techniques for pulverized coal combustion and fluidized bed combustion, low-carbon energy and emission controls, and industrial applications. Highlighting research areas that are of great importance in promoting collaboration between related subjects and the technical development of coal-related fields, the book offers a valuable reference guide for researchers and engineers alike.
Download or read book Integrated Gasification Combined Cycle IGCC Technologies written by Ting Wang and published by Woodhead Publishing. This book was released on 2016-11-26 with total page 928 pages. Available in PDF, EPUB and Kindle. Book excerpt: Integrated Gasification Combined Cycle (IGCC) Technologies discusses this innovative power generation technology that combines modern coal gasification technology with both gas turbine and steam turbine power generation, an important emerging technology which has the potential to significantly improve the efficiencies and emissions of coal power plants. The advantages of this technology over conventional pulverized coal power plants include fuel flexibility, greater efficiencies, and very low pollutant emissions. The book reviews the current status and future developments of key technologies involved in IGCC plants and how they can be integrated to maximize efficiency and reduce the cost of electricity generation in a carbon-constrained world. The first part of this book introduces the principles of IGCC systems and the fuel types for use in IGCC systems. The second part covers syngas production within IGCC systems. The third part looks at syngas cleaning, the separation of CO2 and hydrogen enrichment, with final sections describing the gas turbine combined cycle and presenting several case studies of existing IGCC plants. Provides an in-depth, multi-contributor overview of integrated gasification combined cycle technologies Reviews the current status and future developments of key technologies involved in IGCC plants Provides several case studies of existing IGCC plants around the world
Download or read book High Temperature Air Combustion written by Hiroshi Tsuji and published by CRC Press. This book was released on 2002-12-03 with total page 425 pages. Available in PDF, EPUB and Kindle. Book excerpt: Maximize efficiency and minimize pollution: the breakthrough technology of high temperature air combustion (HiTAC) holds the potential to overcome the limitations of conventional combustion and allow engineers to finally meet this long-standing imperative. Research has shown that HiTAC technology can provide simultaneous reduction of CO2 and nitric
