Download or read book Oxide Surfaces and Metal oxide Interfaces Studied by Grazing Incidence X ray Scattering written by Gilles Renaud and published by . This book was released on 1998 with total page 90 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Surface Science Reports written by and published by . This book was released on 1998 with total page 90 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Oxide Surfaces written by and published by Elsevier. This book was released on 2001-05-21 with total page 677 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book is a multi-author survey (in 15 chapters) of the current state of knowledge and recent developments in our understanding of oxide surfaces. The author list includes most of the acknowledged world experts in this field. The material covered includes fundamental theory and experimental studies of the geometrical, vibrational and electronic structure of such surfaces, but with a special emphasis on the chemical properties and associated reactivity. The main focus is on metal oxides but coverage extends from 'simple' rocksalt materials such as MgO through to complex transition metal oxides with different valencies.
Download or read book Multifunctional Oxide Heterostructures written by Evgeny Y. Tsymbal and published by OUP Oxford. This book was released on 2012-08-30 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is devoted to the rapidly developing field of oxide thin-films and heterostructures. Oxide materials combined with atomic-scale precision in a heterostructure exhibit an abundance of macroscopic physical properties involving the strong coupling between the electronic, spin, and structural degrees of freedom, and the interplay between magnetism, ferroelectricity, and conductivity. Recent advances in thin-film deposition and characterization techniques made possible the experimental realization of such oxide heterostructures, promising novel functionalities and device concepts. The book consists of chapters on some of the key innovations in the field over recent years, including strongly correlated oxide heterostructures, magnetoelectric coupling and multiferroic materials, thermoelectric phenomena, and two-dimensional electron gases at oxide interfaces. The book covers the core principles, describes experimental approaches to fabricate and characterize oxide heterostructures, demonstrates new functional properties of these materials, and provides an overview of novel applications.
Download or read book Magnetic Properties of Antiferromagnetic Oxide Materials written by Lamberto Duò and published by John Wiley & Sons. This book was released on 2010-04-16 with total page 362 pages. Available in PDF, EPUB and Kindle. Book excerpt: This first focused treatment on a hot topic highlights fundamental aspects as well as technological applications arising from a fascinating area of condensed matter physics. The editors have excellent track records and, in light of the broadness of the topic, retain the focus on antiferromagnetic oxides. They thus cover such topics as dichroism in x-ray absorption, non-magnetic substrates, exchange bias, ferromagnetic-antiferromagnetic interface coupling and oxide multilayers, as well as imaging using soft x-ray microscopy. The result is a very timely monograph for solid state physicists and chemists, materials scientists, electrical engineers, physicists in industry, physical laboratory technicians, and suppliers of sensors.
Download or read book Analytical Methods In Corrosion Science and Engineering written by Philippe Marcus and published by CRC Press. This book was released on 2005-07-27 with total page 776 pages. Available in PDF, EPUB and Kindle. Book excerpt: Damage from corrosion costs billions of dollars per year. Controlling corrosion requires a fundamental, in-depth understanding of the mechanisms and phenomena involved, and this understanding is best achieved through advanced analytical methods. The first book to treat both surface analytical and electrochemical techniques in a single reference, An
Download or read book Frontiers in Surface Science and Interface Science written by C.B. Duke and published by Gulf Professional Publishing. This book was released on 2002-05-21 with total page 1076 pages. Available in PDF, EPUB and Kindle. Book excerpt: Any notion that surface science is all about semiconductors and coatings is laid to rest by this encyclopedic publication: Bioengineered interfaces in medicine, interstellar dust, DNA computation, conducting polymers, the surfaces of atomic nuclei - all are brought up to date. Frontiers in Surface and Interface Science - a milestone publication deserving a wide readership. It combines a sweeping expert survey of research today with an educated look into the future. It is a future that embraces surface phenomena on scales from the subatomic to the galactic, as well as traditional topics like semiconductor design, catalysis, and surface processing, modeling and characterization. And, great efforts have been made to express sophisticated ideas in an attractive and accessible way. Nanotechnology, surfaces for DNA computation, polymer-based electronics, soft surfaces, interstellar surface chemistry - all feature in this comprehensive collection.
Download or read book Characterization of Minerals Metals and Materials 2019 written by Bowen Li and published by Springer. This book was released on 2019-02-13 with total page 782 pages. Available in PDF, EPUB and Kindle. Book excerpt: This collection gives broad and up-to-date results in the research and development of materials characterization and processing. Topics covered include characterization methods, ferrous materials, non-ferrous materials, minerals, ceramics, polymer and composites, powders, extraction, microstructure, mechanical behavior, processing, corrosion, welding, solidification, magnetic, electronic, environmental, nano-materials, and advanced materials The book explores scientific processes to characterize materials using modern technologies, and focuses on the interrelationships and interdependence among processing, structure, properties, and performance of materials.
Download or read book Spectroscopy of Complex Oxide Interfaces written by Claudia Cancellieri and published by Springer. This book was released on 2018-04-09 with total page 326 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book summarizes the most recent and compelling experimental results for complex oxide interfaces. The results of this book were obtained with the cutting-edge photoemission technique at highest energy resolution. Due to their fascinating properties for new-generation electronic devices and the challenge of investigating buried regions, the book chiefly focuses on complex oxide interfaces. The crucial feature of exploring buried interfaces is the use of soft X-ray angle-resolved photoemission spectroscopy (ARPES) operating on the energy range of a few hundred eV to increase the photoelectron mean free path, enabling the photons to penetrate through the top layers – in contrast to conventional ultraviolet (UV)-ARPES techniques. The results presented here, achieved by different research groups around the world, are summarized in a clearly structured way and discussed in comparison with other photoemission spectroscopy techniques and other oxide materials. They are complemented and supported by the most recent theoretical calculations as well as results of complementary experimental techniques including electron transport and inelastic resonant X-ray scattering.
Download or read book Grazing Incidence X ray Scattering from Magnetic Thin Films and Nanostructures written by David Samuel Eastwood and published by . This book was released on 2009 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Grazing incidence scattering of synchrotron x-rays has been used to characterize the structure of magnetic thin films and periodic nanostructures. The combined metal and metal oxide films have been chosen to clarify the effects of growth processing techniques in technologically important magnetic and magnetoresistive thin film materials, and have particular relevance to the magnetic tunnel junction (MTJ) class of magnetic sensor. Co/Al2O3 thin films and Co/MgO multilayer thin films have been characterized using x-ray reflectivity and diffuse scatter analysis to explain how preparatory oxidation of the lower ferromagnet in an MTJ can reduce N?el interlayer coupling and improve the consistency of magnetoresistance. Measurements reveal differing effects for Al2O3 and MgO tunnel barrier materials. In Co/Al2O3 systems, preoxidation is found to reduce significantly chemical interdiffusion at the interface between the two layers, implying a more uniform oxidation of the barrier layer. In Co/MgO multilayers, an increased in-plane correlation length of the inherited interface roughness is seen after preoxidation. This implies that preoxidation suppresses the short wavelength undulations on both sides of the tunnel barrier that cause N?el coupling. Grazing incidence in-plane diffraction measurements on epitaxial Fe/MgO/Fe [001] and Fe/Au/MgO/Fe [001] films during annealing to 600 K have shown that, in both cases, the MgO lattice is initially strained towards being commensurate with the iron and gold layers, but relaxes after annealing towards a typical bulk MgO lattice. The iron and gold layers display linear thermal expansion at rates consistent with the bulk material. These in-plane lattice measurements demonstrate how the strain and strain dispersion in an epitaxial MgO barrier layer can be relieved under controlled annealing conditions. Finally, patterned thin film surfaces with submicron periodic symmetries have been studied by grazing incidence x-ray scattering. A novel semi-kinematical theory has been developed into a numerical algorithm capable of simulating the scatter from a wide range of arbitrary and disordered nanoscale arrays. This has allowed key structural parameters including array periodicity, symmetry and array coherence lengths to be extracted from experimental data.
Download or read book Surface Science Reports written by and published by . This book was released on 1999 with total page 656 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Relaxation of the Chemical Bond written by Chang Q Sun and published by Springer. This book was released on 2014-07-08 with total page 816 pages. Available in PDF, EPUB and Kindle. Book excerpt: The aim of this book is to explore the detectable properties of a material to the parameters of bond and non-bond involved and to clarify the interdependence of various properties. This book is composed of four parts; Part I deals with the formation and relaxation dynamics of bond and non-bond during chemisorptions with uncovering of the correlation among the chemical bond, energy band and surface potential barrier (3B) during reactions; Part II is focused on the relaxation of bonds between atoms with fewer neighbors than the ideal in bulk with unraveling of the bond order-length-strength (BOLS) correlation mechanism, which clarifies the nature difference between nanostructures and bulk of the same substance; Part III deals with the relaxation dynamics of bond under heating and compressing with revealing of rules on the temperature-resolved elastic and plastic properties of low-dimensional materials; Part IV is focused on the asymmetric relaxation dynamics of the hydrogen bond (O:H-O) and the anomalous behavior of water and ice under cooling, compressing and clustering. The target audience for this book includes scientists, engineers and practitioners in the area of surface science and nanoscience.
Download or read book Theoretical Surface Science written by Axel Groß and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 279 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recent years have witnessed tremendous progress in the theoretical treatment of surfaces and processes on surfaces. A variety of surface properties can now be described from first principles, i.e. without invoking any empirical parameters. In this book the theoretical concepts and computational tools necessary and relevant for a microscopic approach to the theoretical description of surface science is presented. Based on the fundamental theoretical entity, the Hamiltonian, a hierarchy of theoretical methods is introduced. Furthermore, a detailed discussion of surface phenomena is given and comparisons made to experimental results made, making the book suitable for both graduate students and for experimentalists seeking an overview of the theoretical concepts in surface science.
Download or read book Applications of Synchrotron Radiation in Low Temperature Geochemistry and Environmental Science written by Paul A. Fenter and published by Walter de Gruyter GmbH & Co KG. This book was released on 2018-12-17 with total page 604 pages. Available in PDF, EPUB and Kindle. Book excerpt: Volume 49 of Reviews in Mineralogy and Geochemistry reviews the state of the art of synchrotron radiation applications in low temperature geochemistry and environmental science, and offer speculations on future developments. The reader of this volume will acquire an appreciation of the theory and applications of synchrotron radiation in low temperature geochemistry and environmental science, as well as the significant advances that have been made in this area in the past two decades. It gives a fairly comprehensive overview of synchrotron radiation applications in low temperature geochemistry and environmental science, describes the ways that synchrotron radiation is generated, including a history of synchrotrons and a discussion of aspects of synchrotron radiation that are important to the experimentalist, describes specific synchrotron methods that are most useful for single-crystal surface and mineral-fluid interface studies as well as methods that can be used more generally for investigating complex polyphase fine-grained or amorphous materials, including soils, rocks, and organic matter.
Download or read book Molecular Modeling of Geochemical Reactions written by James D. Kubicki and published by John Wiley & Sons. This book was released on 2016-07-12 with total page 436 pages. Available in PDF, EPUB and Kindle. Book excerpt: Molecular processes in nature affect human health, the availability of resources and the Earth’s climate. Molecular modelling is a powerful and versatile toolbox that complements experimental data and provides insights where direct observation is not currently possible. Molecular Modeling of Geochemical Reactions: An Introduction applies computational chemistry to geochemical problems. Chapters focus on geochemical applications in aqueous, petroleum, organic, environmental, bio- and isotope geochemistry, covering the fundamental theory, practical guidance on applying techniques, and extensive literature reviews in numerous geochemical sub-disciplines. Topics covered include: • Theory and Methods of Computational Chemistry • Force Field Application and Development • Computational Spectroscopy • Thermodynamics • Structure Determination • Geochemical Kinetics This book will be of interest to graduate students and researchers looking to understand geochemical processes on a molecular level. Novice practitioners of molecular modelling, experienced computational chemists, and experimentalists seeking to understand this field will all find information and knowledge of use in their research.
Download or read book Structure Property Relationships of Oxide Surfaces and Interfaces II Volume 751 written by Materials Research Society. Meeting and published by . This book was released on 2003-05-21 with total page 248 pages. Available in PDF, EPUB and Kindle. Book excerpt: Because surfaces and interfaces found in oxide systems are strikingly complex, they can only be fully understood when examined at an atomic level. Yet for the materials scientist, such understanding is of paramount importance since future technological advances require it. This book, the second in a new series from the Materials Research Society, addresses structure-property relationships in these systems. Compared to the first proceedings, here we see a shift towards less well-defined materials that often more closely resemble reality, and an increasing effort to study these phenomena using in situ techniques. Of particular interest are discussions on the dynamical evolution of surface structure and relationships between the structure of surfaces, their stoichiometry and the distribution of bulk dislocations, which in turn can control the growth and retraction of islands and pits. Modeling and characterization of thin intergranular films, with a focus on how these films influence the properties of so many ceramic materials, are also addressed.
Download or read book Metal Oxide Nanoparticles written by Oliver Diwald and published by John Wiley & Sons. This book was released on 2021-09-10 with total page 903 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ein umfassendes Referenzwerk für Chemiker und Industriefachleute zum Thema Nanopartikel Nanopartikel aus Metalloxid sind ein wesentlicher Bestandteil zahlreicher natürlicher und technologischer Prozesse ? von der Mineralumwandlung bis zur Elektronik. Darüber hinaus kommen Metalloxid-Nanopartikel in Pulverform im Maschinenbau, in der Elektronik und der Energietechnik zum Einsatz. Das Werk Metal Oxide Nanoparticles: Formation, Functional Properties and Interfaces stellt die wichtigsten Synthese- und Formulierungsansätze bei der Nutzung von Metalloxid-Nanopartikeln als Funktionsmaterialien vor. Es werden die üblichen Verarbeitungswege erklärt und die physikalischen und chemischen Eigenschaften der Partikel mithilfe von umfassenden und ergänzenden Charakterisierungsmethoden bewertet. Dieses Werk kann als Einführung in die Formulierung von Nanopartikeln, ihre Grenzflächenchemie und ihre funktionellen Eigenschaften im Nanobereich genutzt werden. Darüber hinaus dient es zum vertiefenden Verständnis, denn das Buch enthält detaillierte Angaben zu fortschrittlichen Methoden bei der physikalischen, chemischen, Oberflächen- und Grenzflächencharakterisierung von Metalloxid-Nanopartikeln in Pulvern und Dispersionen. *Erläuterung der Anwendung von Metalloxid-Nanopartikeln und der wirtschaftlichen Auswirkungen *Betrachtung der Partikelsynthese, einschließlich der Grundsätze ausgewählter Bottom-up-Strategien *Untersuchung der Formulierung von Nanopartikeln mit einer Auswahl von Verarbeitungs- und Anwendungswegen *Diskussion der Bedeutung von Partikeloberflächen und -grenzflächen für Strukturbildung, Stabilität und funktionelle Materialeigenschaften *Betrachtung der Charakterisierung von Metalloxid-Nanopartikeln auf verschiedenen Längenskalen In diesem Buch finden Forscher im akademischen Bereich, Chemiker in der Industrie und Doktoranden wichtige Erkenntnisse über die Synthese, Eigenschaften und Anwendungen von Metalloxid-Nanopartikeln.
