Download or read book Natural Gas Conversion V written by A. Parmaliana and published by Elsevier. This book was released on 1998-09-17 with total page 1005 pages. Available in PDF, EPUB and Kindle. Book excerpt: On January 1988, the ascertained and economically accessible reserves of Natural Gas (NG) amounted to over 144,000 billion cubic meters worldwide, corresponding to 124 billion tons of oil equivalents (comparable with the liquid oil reserves, which are estimated to be 138 billion TOE). It is hypothesized that the volume of NG reserve will continue to grow at the same rate of the last decade. Forecasts on production indicate a potential increase from about 2,000 billion cubic meters in 1990 to not more than 3,300 billion cubic meters in 2010, even in a high economic development scenario. NG consumption represents only one half of oil: 1.9 billion TOE/y as compared to 3.5 of oil. Consequently, in the future gas will exceed oil as a carbon atom source. In the future the potential for getting energetic vectors or petrochemicals from NG will continue to grow.The topics covered in Natural Gas Conversion V reflect the large global R&D effort to look for new and economic ways of NG exploitation. These range from the direct conversion of methane and light paraffins to the indirect conversion through synthesis gas to fuels and chemicals. Particularly underlined and visible are the technologies already commercially viable.These proceedings prove that mature and technologically feasible processes for natural gas conversion are already available and that new and improved catalytic approaches are currently developing, the validity and feasibility of which will soon be documented. This is an exciting area of modern catalysis, which will certainly open novel and rewarding perspectives for the chemical, energy and petrochemical industries.

Download or read book Methane Conversion written by D.M. Bibby and published by Elsevier. This book was released on 1988-03-01 with total page 759 pages. Available in PDF, EPUB and Kindle. Book excerpt: This proceedings volume comprises the invited plenary lectures, contributed and poster papers presented at a symposium organised to mark the successful inauguration of the world's first commercial plant for production of gasoline from natural gas, based on the Mobil methanol-to-gasoline process. The objectives of the Symposium were to present both fundamental research and engineering aspects of the development and commercialization of gas-to-gasoline processes. These include steam reforming, methanol synthesis and methanol-to-gasoline. Possible alternative processes e.g. MOGD, Fischer-Tropsch synthesis of hydrocarbons, and the direct conversion of methane to higher hydrocarbons were also considered.The papers in this volume provide a valuable and extremely wide-ranging overview of current research into the various options for natural gas conversion, giving a detailed description of the gas-to-gasoline process and plant. Together, they represent a unique combination of fundamental surface chemistry catalyst characterization, reaction chemistry and engineering scale-up and commercialization.

Download or read book Methane Activation and Utilization in the Petrochemical and Biofuel Industries written by Hua Song and published by Springer Nature. This book was released on 2021-11-15 with total page 264 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses effective and alternative uses for natural gas (NG) and highlights the utilization of NG in the field of methane activation and chemical production. It details the techniques used during the reforming process of petrochemical and bio-derived fuels and it presents cutting-edge research that describes the utilization of NG that enables it to be more cost-effective and eliminate the expensive greenhouse gas emitting process of hydrogen production. The book addresses three major topics: NG use in upstream heavy oil and bitumen upgrading, NG and its use in downstream oil refining through co-aromatization of various feeds in the petrochemical industry, and NG use in the upgrading of bio-derived fuels and discusses alternative uses of NG. In-depth chapters demonstrate uses for NG beyond heating homes, through catalysis and in-situ hydrogen donation, and its potential applications for the petrochemical and biofuel industries.

Download or read book Catalysis and the Mechanism of Methane Conversion to Chemicals written by Toshihide Baba and published by Springer Nature. This book was released on 2020-04-18 with total page 228 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces various types of reactions to produce chemicals by the direct conversion of methane from the point of view of mechanistic and functional aspects. The chemicals produced from methane are aliphatic and aromatic hydrocarbons such as propylene and benzene, and methanol. These chemicals are created by using homogeneous catalysts, heterogeneous catalysts such as zeolites, and biocatalysts such as enzymes. Various examples of methane conversion reactions that are discussed have been chosen to illustrate how heterogeneous and homogenous catalysts and biocatalysts and/or their reaction environments control the formation of highly energetic species from methane contributing to C-C and C-O bond formation.

Download or read book Metal Oxides in Heterogeneous Catalysis written by Jacques C. Vedrine and published by Elsevier. This book was released on 2018-01-11 with total page 620 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metal Oxides in Heterogeneous Catalysis is an overview of the past, present and future of heterogeneous catalysis using metal oxides catalysts. The book presents the historical, theoretical, and practical aspects of metal oxide-based heterogeneous catalysis. Metal Oxides in Heterogeneous Catalysis deals with fundamental information on heterogeneous catalysis, including reaction mechanisms and kinetics approaches.There is also a focus on the classification of metal oxides used as catalysts, preparation methods and touches on zeolites, mesoporous materials and Metal-organic frameworks (MOFs) in catalysis. It will touch on acid or base-type reactions, selective (partial) and total oxidation reactions, and enzymatic type reactions The book also touches heavily on the biomass applications of metal oxide catalysts and environmentally related/depollution reactions such as COVs elimination, DeNOx, and DeSOx. Finally, the book also deals with future trends and prospects in metal oxide-based heterogeneous catalysis. - Presents case studies in each chapter that provide a focus on the industrial applications - Includes fundamentals, key theories and practical applications of metal oxide-based heterogeneous catalysis in one comprehensive resource - Edited, and contributed, by leading experts who provide perspectives on synthesis, characterization and applications

Download or read book Catalysis written by James J Spivey and published by Royal Society of Chemistry. This book was released on 2021-06-14 with total page 494 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume looks at modern approaches to catalysis and reviews the extensive literature. Chapters highlight application of 2D materials in biomass conversion catalysis, plasmonic photocatalysis, catalytic demonstration of mesoporosity in the hierarchical zeolite and the effect of surface phase oxides on supported metals and catalysis. Looking to the future a chapter on ab initio machine learning for accelerating catalytic materials discovery is included. Appealing broadly to researchers in academia and industry, these illustrative chapters bridge the gap from academic studies in the laboratory to practical applications in industry not only for catalysis field but also for environmental protection. Other chapters with an industrial perspective include heterogeneous and homogeneous catalytic routes for vinyl acetate synthesis, catalysis for production of jet fuel from renewable sources by HDO/HDC and microwave-assisted catalysis for fuel conversion. Chemical reactions in ball mills is also explored. The book will be of great benefit to any researcher wanting a succinct reference on developments in this area now and looking to the future.

Download or read book Catalysis written by James Spivey and published by Royal Society of Chemistry. This book was released on 2020-02-05 with total page 246 pages. Available in PDF, EPUB and Kindle. Book excerpt: Catalysts are required for a variety of applications and researchers are increasingly challenged to find cost effective and environmentally benign catalysts to use. This volume looks at modern approaches to catalysis and reviews the extensive literature. Chapters highlight reactions active under oxidative coupling of methane conditions and how they are interlinked, heterogeneous nickel catalysts and their use in laboratory and industry, the reaction mechanism of heterogeneous catalysis with the surface science probe, the concepts of electroless deposition (ED) methods for preparation of true bimetallic catalysts, the general subject of metal-support interactions occurring over ruthenium-based catalysts and benzene as the target volatile organic compound (VOC). Appealing broadly to researchers in academia and industry, these illustrative chapters bridge the gap from academic studies in the laboratory to practical applications in industry not only for catalysis field but also for environmental protection. The book will be of great benefit to any researcher wanting a succinct reference on developments in this area now and looking to the future.

Download or read book Plasma Catalysis written by Annemie Bogaerts and published by MDPI. This book was released on 2019-04-02 with total page 248 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plasma catalysis is gaining increasing interest for various gas conversion applications, such as CO2 conversion into value-added chemicals and fuels, N2 fixation for the synthesis of NH3 or NOx, methane conversion into higher hydrocarbons or oxygenates. It is also widely used for air pollution control (e.g., VOC remediation). Plasma catalysis allows thermodynamically difficult reactions to proceed at ambient pressure and temperature, due to activation of the gas molecules by energetic electrons created in the plasma. However, plasma is very reactive but not selective, and thus a catalyst is needed to improve the selectivity. In spite of the growing interest in plasma catalysis, the underlying mechanisms of the (possible) synergy between plasma and catalyst are not yet fully understood. Indeed, plasma catalysis is quite complicated, as the plasma will affect the catalyst and vice versa. Moreover, due to the reactive plasma environment, the most suitable catalysts will probably be different from thermal catalysts. More research is needed to better understand the plasma–catalyst interactions, in order to further improve the applications.

Download or read book Methane and its Derivatives written by Sunggyu Lee and published by CRC Press. This book was released on 1996-10-18 with total page 434 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Covers the chemistry, process chemistry, technology, engineering, and economics of methane conversion, including its environmental impact and commercial exploitation. Begins with methane's availability and increasing importance as an environmentally acceptable natural resource alternative and feedstock."

Download or read book Catalysis written by James Spivey and published by Royal Society of Chemistry. This book was released on 2014-02-24 with total page 287 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over 7000 papers are published in the field of catalysis each year. While the majority appear within a handful publications, keeping up with the literature can be difficult. Now in its 26th volume, the Specialist Periodical Report on Catalysis presents critical and comprehensive reviews of the hottest literature published over the last twelve months. Industrial and academic scientists face increasing challenges to find cost-effective and environmentally sound methods for converting natural resources into fuels, chemicals and energy. This series is edited by two leading researchers in the field and provides a balanced and in-depth review of the modern approaches to these challenges, covering major areas of heterogeneous and homogenous catalysis, as well as specific applications of catalysis, such as NOx control, kinetics and experimental techniques, such as microcalorimetry. With chapters detailing specific areas within the field, this series is a comprehensive reference for anyone working in Catalysis and an essential resource for any Library.

Download or read book Design and Applications of Hydroxyapatite Based Catalysts written by Doan Pham Minh and published by John Wiley & Sons. This book was released on 2022-06-15 with total page 580 pages. Available in PDF, EPUB and Kindle. Book excerpt: Essential reference for researchers and experts in industry highlighting the rapidly growing field of hydroxyapatite-based catalysts and their application in various chemical processes. Hydroxyapatite (Ca10(PO4)6(OH)2) is the main mineral component of human and animal bones. It is largely applied in the field of biomaterials due to its biocompatibility. Recently, hydroxyapatite-based materials have especially gained a lot of attention by researchers in catalysis, as they are versatile and have shown precious properties of a good catalyst and catalyst support such as excellent ion-exchange capacity, high porosity, very low water solubility, controlled basicity/acidity, and good thermal stability at high temperatures. Design and Applications of Hydroxyapatite-Based Catalysts gives a detailed overview of the synthesis, characterization, and use of hydroxyapatite-based materials in catalysis. It covers synthetic hydroxyapatites (from pure chemicals or waste), natural apatites and materials from eggshells and animal bones. The application of hydroxyapatite-based catalysts in selective oxidation, deoxygenation, selective hydrogenation, dehydrogenation reactions, organic synthesis, as well as reforming processes and production of energy carriers is reviewed. Moreover, electrocatalysis and photocatalysis using hydroxyapatite-based materials are discussed. Kinetic and mechanism studies of various chemical pro-cesses over hydroxyapatite-based catalysts are also presented. This is the first book solely dedicated to hydroxyapatite-based materials and their use in catalysis. Covers synthesis and characterization, surface and structure studies, kinetic and mechanism aspects, and various applications in heterogeneous catalysis, electrocatalysis, and photocatalysis. Aimed at further stimulating research in the field Design and Applications of Hydroxyapatite-Based Catalysts is an indispensable source-of-information for researchers in academia and industry working in catalysis.

Download or read book The Major Ternary Structural Families written by Olaf Muller and published by Springer. This book was released on 1974 with total page 700 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Carbon Dioxide Utilization to Sustainable Energy and Fuels written by Inamuddin and published by Springer Nature. This book was released on 2021-11-30 with total page 354 pages. Available in PDF, EPUB and Kindle. Book excerpt: This edited book provides an in-depth overview of carbon dioxide (CO2) transformations to sustainable power technologies. It also discusses the wide scope of issues in engineering avenues, key designs, device fabrication, characterizations, various types of conversions and related topics. It includes studies focusing on the applications in catalysis, energy conversion and conversion technologies, etc. This is a unique reference guide, and one of the detailed works is on this technology. The book is the result of commitments by leading researchers from various backgrounds and expertise. The book is well structured and is an essential resource for scientists, undergraduate, postgraduate students, faculty, R&D professionals, energy chemists and industrial experts.

Download or read book Functional Properties of Advanced Engineering Materials and Biomolecules written by Felipe A. La Porta and published by Springer Nature. This book was released on 2021-05-17 with total page 778 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book shows how a small toolbox of experimental techniques, physical chemistry concepts as well as quantum/classical mechanics and statistical methods can be used to understand, explain and even predict extraordinary applications of these advanced engineering materials and biomolecules. It highlights how improving the material foresight by design, including the fundamental understanding of their physical and chemical properties, can provide new technological levels in the future.

Download or read book Catalysis Green Chemistry and Sustainable Energy written by Angelo Basile and published by Elsevier. This book was released on 2019-11-22 with total page 578 pages. Available in PDF, EPUB and Kindle. Book excerpt: Catalysis, Green Chemistry and Sustainable Energy: New Technologies for Novel Business Opportunities offers new possibilities for businesses who want to address the current global transition period to adopt low carbon and sustainable energy production. This comprehensive source provides an integrated view of new possibilities within catalysis and green chemistry in an economic context, showing how these potential new technologies may become useful to business. Fundamentals and specific examples are included to guide the transformation of idea to innovation and business. Offering an overview of the new possibilities for creating business in catalysis, energy and green chemistry, this book is a beneficial tool for students, researchers and academics in chemical and biochemical engineering. - Discusses new developments in catalysis, energy and green chemistry from the perspective of converting ideas to innovation and business - Presents case histories, preparation of business plans, patent protection and IP rights, creation of start-ups, research funds and successful written proposals - Offers an interdisciplinary approach combining science and business

Download or read book Handbook of Membrane Reactors written by Angelo Basile and published by Elsevier. This book was released on 2013-04-04 with total page 973 pages. Available in PDF, EPUB and Kindle. Book excerpt: Membrane reactors are increasingly replacing conventional separation, process and conversion technologies across a wide range of applications. Exploiting advanced membrane materials, they offer enhanced efficiency, are very adaptable and have great economic potential. There has therefore been increasing interest in membrane reactors from both the scientific and industrial communities, stimulating research and development. The two volumes of the Handbook of membrane reactors draw on this research to provide an authoritative review of this important field.Volume 2 reviews reactor types and industrial applications, beginning in part one with a discussion of selected types of membrane reactor and integration of the technology with industrial processes. Part two goes on to explore the use of membrane reactors in chemical and large-scale hydrogen production from fossil fuels. Electrochemical devices and transport applications of membrane reactors are the focus of part three, before part four considers the use of membrane reactors in environmental engineering, biotechnology and medicine. Finally, the book concludes with a discussion of the economic aspects of membrane reactors.With its distinguished editor and international team of expert contributors, the two volumes of the Handbook of membrane reactors provide an authoritative guide for membrane reactor researchers and materials scientists, chemical and biochemical manufacturers, industrial separations and process engineers, and academics in this field. - Discusses integration of membrane technology with industrial processes - Explores the use of membrane reactors in chemical and large-scale hydrogen production from fossil fuels - Considers electrochemical devices and transport applications of membrane reactors

Download or read book Reaction Mechanisms in Carbon Dioxide Conversion written by Michele Aresta and published by Springer. This book was released on 2015-11-07 with total page 423 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides an analysis of the reaction mechanisms relevant to a number of processes in which CO2 is converted into valuable products. Several different processes are considered that convert CO2 either in specialty chemicals or in bulk products or fuels. For each reaction, the mechanism is discussed and the assessed steps besides the dark sites of the reaction pathway are highlighted. From the insertion of CO2 into E-X bonds to the reduction of CO2 to CO or other C1 molecules or else to C2 or Cn molecules, the reactions are analysed in order to highlight the known and obscure reaction steps. Besides well known reaction mechanisms and energy profiles, several lesser known situations are discussed. Advancing knowledge of the latter would help to develop efficient routes for the conversion of CO2 into valuable products useful either in the chemical or in the energy industry. The content of this book is quite different from other books reporting the use of CO2. On account of its clear presentation, “Reaction Mechanisms in Carbon Dioxide Conversion” targets in particular researchers, teachers and PhD students.