Download or read book Oxidation Process for Improving Gold Recovery from Carbon bearing Gold Ores written by Bernard J. Scheiner and published by . This book was released on 1971 with total page 22 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Electrolytic Oxidation of Carbonaceous Ores for Improving Gold Recovery written by Bernard J. Scheiner and published by . This book was released on 1969 with total page 20 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Extraction of Gold from Carbonaceous Ores written by and published by . This book was released on 1972 with total page 28 pages. Available in PDF, EPUB and Kindle. Book excerpt: Oxidation procedures based on the chlorine-hypochlorite system were investigated for improving gold recovery from carbonaceous gold ores. The oxidation pretreatment prior to cyanidation was accomplished by (1) addition of sodium hypochlorite to ore pulp, (2) by addition of chlorine to ore pulp, and (3) by generation of hypochlorite in situ by electrolysis of a brine solution used to pulp the ore. Gold extraction of 90 pct was achieved by cyanidation of carbonaceous ore that had been pretreated with 20 lb per ton sodium hypochlorite at 50° C for 4 hours. Similarly, pretreatment of the ore pulp with 35 lb chlorine per ton at 24° to 30° C and 15 hours reaction time resulted in 89-pct gold extraction by subsequent cyaanidation. Concomitant studies showed that electrolyzing the pulp prepared with a brine solution was equally as effective as electrolyzing hypochlorite and chlorine for oxidizing carbonaceous ore constituents that are deleterious to cyanidation. Gold extraction of 90 pct was obtained by electrolysis when 275 lb of ore was treated at 200 amp for 7 hours in an 8- to 10-pct salt solution. Power consumption was in the range of 60 kwhr per ton.

Download or read book Investigation of Oxidation Systems for Improving Gold Recovery from Carbonaceous Materials written by Bernard J. Scheiner and published by . This book was released on 1968 with total page 16 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Gold written by Nathaniel Arbiter and published by CRC Press. This book was released on 1990 with total page 242 pages. Available in PDF, EPUB and Kindle. Book excerpt: The eight articles first appeared as volume 6 (no date) of Mineral processing and extractive metallurgy review. They review new methods of recovery for gold, and to some extent, silver, focus on the particular challenges of extraction from carbonaceous ores and from various sulfide-bearing ore, and the treatment of refractory gold ore, and discuss high-temperature and biological oxidation, high- temperature chlorination, and removing metals from leach liquor. Book club price, $40. Annotation copyrighted by Book News, Inc., Portland, OR

Download or read book The Chemistry of Gold Extraction written by John Marsden and published by SME. This book was released on 2006 with total page 688 pages. Available in PDF, EPUB and Kindle. Book excerpt: Extensively revised and updated, this edition provides the broad base of knowledge required by all working in the gold extraction and gold processing industries. It bridges the gap between research and industry by emphasizing practical applications of chemical principles and techniques.

Download or read book The Extractive Metallurgy of Gold written by John C. Yannopoulos and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 285 pages. Available in PDF, EPUB and Kindle. Book excerpt: The history of gold begins in antiquity. Bits of gold were found in Spanish caves that were used by Paleolithic people around 40,000 B.C. Gold is the "child of Zeus," wrote the Greek poet Pindar. The Romans called the yellow metal aurum ("shining dawn"). Gold is the first element and first metal mentioned in the Bible, where it appears in more than 400 references. This book provides the most thorough and up-to-date information available on the extraction of gold from its ores, starting with the miner alogy of gold ores and ending with details of refining. Each chapter con cludes with a list of references including full publication information for all works cited. Sources preceded by an asterisk (*) are especially recom mended for more in-depth study. Nine appendices, helpful to both students and operators, complement the text. I have made every attempt to keep abreast of recent technical literature on the extraction of gold. Original publications through the spring of 1989 have been reviewed and cited where appropriate. This book is intended as a reference for operators, managers, and designers of gold mills and for professional prospectors. It is also designed as a textbook for extractive metallurgy courses. I am indebted to the Library of Engineering Societies in New York, which was the main source of the references in the book. The assistance of my son, Panos, in typing the manuscript is gratefully acknowledged.

Download or read book Rare Metal Technology 2015 written by Neale Neelameggham and published by Springer. This book was released on 2016-12-01 with total page 264 pages. Available in PDF, EPUB and Kindle. Book excerpt: This collection presents the papers from a symposium on extraction of rare metals as well as rare extraction processing techniques used in metal production. Paper topics include the extraction and processing of elements like antimony, arsenic, calcium, chromium, hafnium, gold, indium, lithium, molybdenum, niobium, rare earth metals, rhenium, scandium, selenium, silver, strontium, tantalum, tellurium, tin, tungsten, vanadium, and zirconium. Rare processing techniques presented include bio leaching, molecular recognition technology, recovery of valuable components of commodity metals such as magnesium from laterite process wastes, titanium from ilmenites, and rare metals from wastes such as phosphors and LCD monitors.

Download or read book Advances in Gold Ore Processing written by Mike D. Adams and published by Elsevier. This book was released on 2005-12-02 with total page 1077 pages. Available in PDF, EPUB and Kindle. Book excerpt: The gold processing industry is experiencing change. As free-milling and oxide ores become depleted, more complex polymetallic and refractory ores are being processed, coupled with increasing pressure for stricter environmental compliance. Recent years have also seen a steady reduction in mineral processing and metallurgy graduates and a gradual loss of older operating experience. A contribution to documenting current and future best practice in gold ore processing seems timely. The focus of this volume is on advances in current gold plant operation, from conception to closure; chapters also cover innovations at the bench and pilot-scale level that would be expected to find commercial application at some stage. Sufficient coverage is also given to the chemistry and engineering aspects. The general principle behind the structure of the volume is that of flowsheeting based on unit operations and applied to a mineralogical classification of gold ore types. From concept to closure, this book covers all unit operations, mineralogies and processes that are relevant to dealing with today's complex orebodies. Practical experience is vital to the successful development, operation and closure of any operation. The 42 chapters have been contributed by a total of 66 authors and co-authors who are experts from countries spanning the globe, and representing exhaustive practical knowledge covering many disciplines relevant to gold processing. * Current best practice as elucidated by a select panel of experts in the field* Innovations at the bench and pilot-scale level that would be expected to find commercial application at some stage* Mineralogical-based approach to flowsheeting

Download or read book Gold Metallurgy and the Environment written by Sadia Ilyas and published by CRC Press. This book was released on 2018-02-19 with total page 184 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gives an overview of all the gold extraction processes along with their mechanistic study and environmental impact. Reviews extraction techniques previously employed as well as recently evolved technology for gold leaching, provides technical flow sheets for processing of ores with a diversity of lixiviants and offers a compulsory overview of every gold processing technique It also discusses recent integrated techniques including hydro- and bio-metallurgical techniques with examples

Download or read book Precious Metals Recovery from Low grade Resources written by and published by . This book was released on 1985 with total page 68 pages. Available in PDF, EPUB and Kindle. Book excerpt: This information circular describes research the Bureau of Mines has conducted to improve technology for recovering precious metals from low-grade resources. Many of the reported findings are recent, and some of te work described is ongoing. Topics discussed include cyanidation of carbonaceous gold ores to enhance gold recovery, a new method for precipitating mercury during cyanide leaching of gold ores, a staged heap leaching process to generate suitable solutions for direct electrowinning of gold, the use of anion-exchange resins to recover gold from cyanide solutions, and precious metals recovery from electronic scrap.

Download or read book Information Circular written by and published by . This book was released on 1973 with total page 862 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Report of Investigations written by and published by . This book was released on 1989 with total page 378 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Noble Metals written by Yen-Hsun Su and published by BoD – Books on Demand. This book was released on 2012-02-01 with total page 430 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a broad spectrum of insights into the optical principle, resource, fabrication, nanoscience, and nanotechnology of noble metal. It also looks at the advanced implementation of noble metal in the field of nanoscale materials, catalysts and biosystem. This book is ideal not only for scientific researchers but also as a reference for professionals in material science, engineering, nonascience and plasmonics.

Download or read book Gold Ore Processing written by Mike D. Adams and published by Elsevier. This book was released on 2016-05-03 with total page 1040 pages. Available in PDF, EPUB and Kindle. Book excerpt: Gold Ore Processing: Project Development and Operations, Second Edition, brings together all the technical aspects relevant to modern gold ore processing, offering a practical perspective that is vital to the successful and responsible development, operation, and closure of any gold ore processing operation. This completely updated edition features coverage of established, newly implemented, and emerging technologies; updated case studies; and additional topics, including automated mineralogy and geometallurgy, cyanide code compliance, recovery of gold from e-waste, handling of gaseous emissions, mercury and arsenic, emerging non-cyanide leaching systems, hydro re-mining, water management, solid–liquid separation, and treatment of challenging ores such as double refractory carbonaceous sulfides. Outlining best practices in gold processing from a variety of perspectives, Gold Ore Processing: Project Development and Operations is a must-have reference for anyone working in the gold industry, including metallurgists, geologists, chemists, mining engineers, and many others. Includes several new chapters presenting established, newly implemented, and emerging technologies in gold ore processing Covers all aspects of gold ore processing, from feasibility and development stages through environmentally responsible operations, to the rehabilitation stage Offers a mineralogy-based approach to gold ore process flowsheet development that has application to multiple ore types

Download or read book Earth Grounding Beds design and Evaluation written by and published by . This book was released on 1985 with total page 538 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Heavy Metals written by Mazen Nazal and published by BoD – Books on Demand. This book was released on 2021-11-03 with total page 282 pages. Available in PDF, EPUB and Kindle. Book excerpt: In recent years, urbanization and industrialization have produced large amounts of heavy metals, which are highly toxic to both humans and the environment. This book presents a comprehensive overview of heavy metals including their physiochemical properties, toxicity, transfer in the environment, legislation, environmental impacts, and mitigation measures. Written by experts in the field, chapters include scientific research as well as case studies.