Download or read book Catalysis By Gold written by Geoffrey C Bond and published by World Scientific. This book was released on 2006-08-15 with total page 383 pages. Available in PDF, EPUB and Kindle. Book excerpt: Gold has traditionally been regarded as inactive as a catalytic metal. However, the advent of nanoparticulate gold on high surface area oxide supports has demonstrated its high catalytic activity in many chemical reactions. Gold is active as a heterogeneous catalyst in both gas and liquid phases, and complexes catalyse reactions homogeneously in solution. Many of the reactions being studied will lead to new application areas for catalysis by gold in pollution control, chemical processing, sensors and fuel cell technology. This book describes the properties of gold, the methods for preparing gold catalysts and ways to characterise and use them effectively in reactions. The reaction mechanisms and reasons for the high activities are discussed and the applications for gold catalysis considered./a

Download or read book Catalytic Application of Nano Gold Catalysts written by Neeraj Kumar Mishra and published by BoD – Books on Demand. This book was released on 2016-08-31 with total page 142 pages. Available in PDF, EPUB and Kindle. Book excerpt: Gold, considered catalytically inactive for a long time, is now a fascinating partner of modern chemistry, as scientists such as Bond, Teles, Haruta, Hutchings, Ito and Hayashi opened new perspectives for the whole synthetic chemist community. Recently gold has attracted significant attention due to its advantageous characteristics as a catalytic material and since it allows easy functionalization with biologically active molecules. In this context, when gold is prepared as very small particles, it turns out to be a highly active catalyst. However, such a phenomenon completely disappears when the gold particle size grows into the micrometer range. Therefore, the preparation for obtaining an active gold catalyst is so important. The primary objective of this book is to provide a comprehensive overview of gold metal nanoparticles and their application as promising catalysts.

Download or read book Modern Heterogeneous Oxidation Catalysis written by Noritaka Mizuno and published by John Wiley & Sons. This book was released on 2009-11-18 with total page 356 pages. Available in PDF, EPUB and Kindle. Book excerpt: Filling a gap in the current literature, this comprehensive reference presents all important catalyst classes, including metal oxides, polyoxometalates, and zeolites. Readers will find here everything they need to know -- from structure design to characterization, and from immobilization to industrial processes. A true must-have for anyone working in this key technology.

Download or read book Heterogeneous Gold Catalysts and Catalysis written by Zhen Ma and published by Royal Society of Chemistry. This book was released on 2014-09-10 with total page 288 pages. Available in PDF, EPUB and Kindle. Book excerpt: Once considered an inert element, gold has recently gained attention as a catalyst. With hundreds of papers being published each year, this book presents a comprehensive review of this rapidly-evolving field, with contributions by leading experts across the globe. Going through the chapters citing the primary literature, the reader will gain a thorough background to the use of gold in catalysis, as well as the latest methods for the preparation of gold catalysts. Other chapters demonstrate the characterisation and modelling of gold-catalysed reactions, with consideration given to both the fundamentals and commercial applications of this emerging group of catalysts.Written to be accessible by postgraduates and newcomers to the field, this book will also benefit experienced researchers and therefore be an essential reference in the laboratory.

Download or read book Strong Metal support Interactions written by R. T. K. Baker and published by . This book was released on 1986 with total page 258 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Nanoparticles and Catalysis written by Didier Astruc and published by John Wiley & Sons. This book was released on 2008-06-25 with total page 663 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by international experts, this monograph combines two of the most important aspects of modern chemistry, presenting the latest knowledge on these environmental friendly applications. This result is a comprehensive overview of the application of nanoparticles in catalysis, focusing on synthesis and the most important reaction types, providing all the information needed by catalytic, organic and solid state chemists, as well as those working with or on organometallics, materials scientists, and chemists in industry.

Download or read book Gold Nanoparticles For Physics Chemistry And Biology Second Edition written by Catherine Louis and published by World Scientific. This book was released on 2017-06-02 with total page 681 pages. Available in PDF, EPUB and Kindle. Book excerpt: Gold Nanoparticles for Physics, Chemistry and Biology offers an overview of recent research into gold nanoparticles, covering their discovery, usage and contemporary practical applications.This Second Edition begins with a history of over 2000 years of the use of gold nanoparticles, with a review of the specific properties which make gold unique. Updated chapters include gold nanoparticle preparation methods, their plasmon resonance and thermo-optical properties, their catalytic properties and their future technological applications. New chapters have been included, and reveal the growing impact of plasmonics in research, with an introduction to quantum plasmonics, plasmon assisted catalysis and electro-photon conversion. The growing field of nanoparticles for health is also addressed with a study of gold nanoparticles as radiosensibiliser for radiotherapy, and of gold nanoparticle functionalisation. This new edition also considers the relevance of bimetallic nanoparticles for specific applications.World-class scientists provide the most up-to-date findings for an introduction to gold nanoparticles within the related areas of chemistry, biology, material science, optics and physics. It is perfectly suited to advanced level students and researchers looking to enhance their knowledge in the study of gold nanoparticles.

Download or read book Carbon Materials for Catalysis written by Philippe Serp and published by John Wiley & Sons. This book was released on 2009-02-04 with total page 603 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the first comprehensive book covering all aspects of the use of carbonaceous materials in heterogeneous catalysis. It covers the preparation and characterization of carbon supports and carbon-supported catalysts; carbon surface chemistry in catalysis; the description of catalytic, photo-catalytic, or electro-catalytic reactions, including the development of new carbon materials such as carbon xerogels, aerogels, or carbon nanotubes; and new carbon-based materials in catalytic or adsorption processes. This is a premier reference for carbon, inorganic, and physical chemists, materials scientists and engineers, chemical engineers, and others.

Download or read book Handbook Of Advanced Methods And Processes In Oxidation Catalysis From Laboratory To Industry written by Daniel Duprez and published by World Scientific. This book was released on 2014-07-24 with total page 1035 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers a comprehensive overview of the most recent developments in both total oxidation and combustion and also in selective oxidation. For each topic, fundamental aspects are paralleled with industrial applications. The book covers oxidation catalysis, one of the major areas of industrial chemistry, outlining recent achievements, current challenges and future opportunities. One distinguishing feature of the book is the selection of arguments which are emblematic of current trends in the chemical industry, such as miniaturization, use of alternative, greener oxidants, and innovative systems for pollutant abatement. Topics outlined are described in terms of both catalyst and reaction chemistry, and also reactor and process technology.

Download or read book Stable Supported Gold Nanoparticle Catalyst for Environmentally Responsible Propylene Epoxidation written by Nidhi Kapil and published by Springer Nature. This book was released on 2022-11-04 with total page 212 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes a detailed multi-scale approach integrating nano- (active site), meso- (porous catalyst architecture) and macroscale (reactor) efforts, to address the challenges of producing a better epoxidation catalyst. It contains an in-depth study of the design and synthesis of gold nanoparticles and their application as a catalyst for direct gas phase propylene epoxidation. “Direct” means using only hydrogen and oxygen in one step, which is key for sustainable manufacturing, as opposed to commercialised, more complex production routes requiring multiple steps, or integration with another chemical plant. The insights gained can be used for rational design for stable and selective catalysts for other reactions. It also details the step-by-step process to build an epoxidation reactor system with a focus on safety aspects, which can be used as a guidebook for undergraduate and graduate students in chemical engineering. Beyond heterogeneous catalysis, the new, easily accomplished methodology for synthesising atomically precise nanoparticles is shown to be relevant to electrocatalysis and to healthcare applications, such as anti-microbial surfaces. This book will be of interest to researchers, engineers and experts in the related areas of chemical engineering, chemistry, material science and electrochemistry.

Download or read book Environmental Catalysis over Gold Based Materials written by George Avgouropoulos and published by Royal Society of Chemistry. This book was released on 2013-07-18 with total page 239 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the major developments in hydrogen-related catalytic and electrocatalytic reactions over gold-based materials over the last decade, including many of the advances made by academic and industrial researchers. Gold-based catalysts with potentially exciting new applications in hydrogen technology (e.g. purification of hydrogen, anode/cathode electrodes) are being investigated at a much higher rate than even before. A variety of techniques to synthesize, characterize and evaluate these materials is being employed. The book will be of interest to all those working in catalysis/green chemistry, in particular, to advanced level researchers in catalysis using gold-based materials. It is hoped that specialists in one reaction will read with interest the chapters on the neighbouring expertise. The book is also meant for PhD-students and advanced students interested in this area.

Download or read book Nanotechnology in Catalysis written by Bert Sels and published by John Wiley & Sons. This book was released on 2017-06-21 with total page 1500 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reflecting the R&D efforts in the field that have resulted in a plethora of novel applications over the past decade, this handbook gives a comprehensive overview of the tangible benefits of nanotechnology in catalysis. By bridging fundamental research and industrial development, it provides a unique perspective on this scientifically and economically important field. While the first three parts are devoted to preparation and characterization of nanocatalysts, the final three provide in-depth insights into their applications in the fine chemicals industry, the energy industry, and for environmental protection, with expert authors reporting on real-life applications that are on the brink of commercialization. Timely reading for catalytic chemists, materials scientists, chemists in industry, and process engineers.

Download or read book Nanocatalysis written by Ulrich Heiz and published by Springer Science & Business Media. This book was released on 2007-01-10 with total page 514 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanocatalysis, a subdiscipline of nanoscience, seeks to control chemical reactions by changing the size, dimensionality, chemical composition, and morphology of the reaction center and by changing the kinetics using nanopatterning of the reaction center. This book offers a detailed pedagogical and methodological overview of the field. Readers discover many examples of current research, helping them explore new and emerging applications.

Download or read book Supported Metals in Catalysis written by James Arthur Anderson and published by World Scientific. This book was released on 2012 with total page 581 pages. Available in PDF, EPUB and Kindle. Book excerpt: With contributions from experts in supported metal catalysis, from both the industry and academia, this book presents the latest developments in characterization and application of supported metals in heterogeneous catalysis. In addition to a thorough and updated coverage of the traditional aspects of heterogeneous catalysis such as preparation, characterization and use in well-established technologies such as Naphtha reforming, the book also includes emerging areas where supported metal catalysis will make significant contributions in future developments, such as fuel cells and fine chemicals synthesis. The second edition of Supported Metals in Catalysis comes complete with new and updated chapters containing important summaries of research in a rapidly evolving field. Very few other books deal with this highly pertinent subject matter, and as such, it is a must-have for anyone working in the field of heterogeneous catalysis.

Download or read book Nanoporous Gold written by Arne Wittstock and published by Royal Society of Chemistry. This book was released on 2012-03-28 with total page 265 pages. Available in PDF, EPUB and Kindle. Book excerpt: High-surface-area materials have recently attracted significant interest due to potential applications in various fields such as electrochemistry and catalysis, gas-phase catalysis, optics, sensors and actuators, energy harvesting and storage. In contrast to classical materials the properties of high-surface-area materials are no longer determined by their bulk, but by their nanoscale architecture. Nanoporous gold (np-Au) represents the fascinating class of mesoporous metals that have been intensively investigated in recent years. The current interest and the increasing number of scientific publications show that np-Au by itself is an outstanding nano-material that justifies a book devoted to all aspects of its properties and applications. The resulting publication is a discussion of this unique nano-material and is an accessible and comprehensive introduction to the field. The book provides a broad, multi-disciplinary platform to learn more about the properties of nanoporous gold from an inter-disciplinary perspective. It starts with an introduction and overview of state-of-the-art applications and techniques characterizing this material and its applications. It then covers the progress in research within the last years. The chapters are in-depth overviews written by the world's leading scientists in the particular field. Each chapter covers one technique or application so that the reader can easily target their favoured topic and will get the latest and state-of-the-art information in the field.

Download or read book Bimetallic Nanostructures written by Ya-Wen Zhang and published by John Wiley & Sons. This book was released on 2018-05-16 with total page 738 pages. Available in PDF, EPUB and Kindle. Book excerpt: Systematically summarizes the current status and recent advances in bimetallic structures, their shape-controlled synthesis, properties, and applications Intensive researches are currently being carried out on bimetallic nanostructures, focusing on a number of fundamental, physical, and chemical questions regarding their synthesis and properties. This book presents a systematic and comprehensive summary of the current status and recent advances in this field, supporting readers in the synthesis of model bimetallic nanoparticles, and the exploration and interpretation of their properties. Bimetallic Nanostructures: Shape-Controlled Synthesis for Catalysis, Plasmonics and Sensing Applications is divided into three parts. Part 1 introduces basic chemical and physical knowledge of bimetallic structures, including fundamentals, computational models, and in situ characterization techniques. Part 2 summarizes recent developments in synthetic methods, characterization, and properties of bimetallic structures from the perspective of morphology effect, including zero-dimensional nanomaterials, one-dimensional nanomaterials, and two-dimensional nanomaterials. Part 3 discusses applications in electrocatalysis, heterogeneous catalysis, plasmonics and sensing. Comprehensive reference for an important multidisciplinary research field Thoroughly summarizes the present state and latest developments in bimetallic structures Helps researchers find optimal synthetic methods and explore new phenomena in surface science and synthetic chemistry of bimetallic nanostructures Bimetallic Nanostructures: Shape-Controlled Synthesis for Catalysis, Plasmonics and Sensing Applications is an excellent source or reference for researchers and advanced students. Academic researchers in nanoscience, nanocatalysis, and surface plasmonics, and those working in industry in areas involving nanotechnology, catalysis and optoelectronics, will find this book of interest.

Download or read book Nanoparticles in Catalysis written by Shū Kobayashi and published by Springer Nature. This book was released on 2020-11-06 with total page 314 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume discusses the great potential of metal nanoparticle catalysts for complicated molecular synthesis and reviews the current progress of this field. The development of highly active and stable heterogeneous catalysts is a crucial subject in modern science. However, development of heterogeneous catalysts for fine chemical synthesis has lagged far behind those for bulk chemical process. In recent years metal nanoparticle catalysts have been of great interest in this area due to their unique activity, ease of heterogenization, and robustness. Therefore, metal nanoparticle catalysts are an excellent candidate for the above-mentioned active and robust heterogeneous catalysts and this book provides an overview of this area. The present volume summarizes recent progress on nanoparticle catalysis for various organic transformations from simple redox reactions to complex asymmetric C–C bond forming reactions and also presents seminal studies on new technologies. It comprehensively summarizes advances in metal nanoparticle catalysis across several aspects including reaction manners, mechanistic investigations and new synthetic methodologies to encourage the use of metal nanoparticle catalysts for future organic synthesis. This volume will be of interest to students, researchers and professionals focused on the next-generation of fine chemical synthesis.